Genome-wide transcriptional profiling of Lactobacillus acidophilus' response to bile
Ontology highlight
ABSTRACT:
ORGANISM(S): Lactobacillus acidophilus NCFM
SUBMITTER: Todd Klaenhammer
PROVIDER: E-GEOD-11048 | biostudies-arrayexpress |
REPOSITORIES: biostudies-arrayexpress
Publications
Characterization of a novel bile-inducible operon encoding a two-component regulatory system in Lactobacillus acidophilus.
Pfeiler Erika A EA Azcarate-Peril M Andrea MA Klaenhammer Todd R TR
Journal of bacteriology 20070420 13
Lactobacillus acidophilus NCFM is an industrially important strain used extensively as a probiotic culture. Tolerance of the presence of bile is an attribute important to microbial survival in the intestinal tract. A whole-genome microarray was employed to examine the effects of bile on the global transcriptional profile of this strain, with the intention of elucidating genes contributing to bile tolerance. Genes involved in carbohydrate metabolism were generally induced, while genes involved in ...[more]
Similar Datasets
Project description:Salmonella enterica var. Typhimurium (S. Typhimurium) is a Gram-negative, facultative intracellular pathogen that infects the intestinal tracts of humans and animals. In the host, S. Typhimurium encounters a wide range of oxygen concentrations going from oxic conditions in the stomach to near anoxic conditions in the distal sigmoid colon-rectal junction. In Escherichia coli, FNR (Fumarate Nitrate Reductase) is one of the main regulatory proteins involved in oxygen sensing and in controlling the transcription of the genes required for the aerobic/anaerobic transition.. However, the role of FNR in S. Typhimurium is largely unknown. To assess its role in S. Typhimurium, we constructed an FNR- mutant (NC983) in the pathogenic wild-type (WT) strain, ATCC14028s. The WT and the fnr- mutant strains were grown under anaerobic conditions in a Coy Anaerobic Chamber. Total RNAs were isolated when the cultures reached an OD600 of 0.3 (mid-log). Microarray slides were used to compare the global expression patterns of the two strains (i.e., 14028s vs. NC983). On each slides there were three replicas of the Salmonella genome and we swapped dyes, thus having a total of six replicates for each gene.
2010-07-01 | E-GEOD-3657 | biostudies-arrayexpress
Project description:Ferric uptake regulator (Fur) is the major regulator of iron acquisition in Escherichia coli and other bacteria. In the present study, the role of Fur in anaerobic S. enterica serovar Typhimurium was determined by transcriptome analysis, reporter assays, and enzymatic assays. In anaerobic ?fur, 298 genes were differentially expressed. In general, Fur repressed genes required for iron acquisition/storage, metabolism, electron transport, oxidative/nitrosative stress, and modulators of virulence. There were 73 genes whose expression required Fur, eleven of which contain a putative Fur box 5? of the gene. Transcription of sodA was >9-fold higher in ?fur but there was no corresponding increase in the activity of SodA. Anaerobic cultures of the fur mutant and the WT were used to inoculate two sets of three independent flasks each containing 150 ml of anoxic LB-MOPS-X. The three independent cultures were grown to an optical density at 600 nm (OD600) of 0.25 to 0.35, pooled, and treated with RNAlater (QIAGEN, Valencia, CA) to fix the cells and preserve the quality of the RNA. Total RNA was extracted with the RNeasy RNA extraction kit (QIAGEN), and the samples were treated with RNase-free DNase (Invitrogen, Carlsbad, CA). The absence of contaminating DNA and the quality of the RNA was confirmed by PCR amplification of known genes and by using agarose gel electrophoresis. Aliquots of the RNA samples were kept at –80°C for use in the microarray and quantitative real-time reverse transcription-PCR (qRT-PCR) studies. The SuperScript Indirect cDNA labeling system (Invitrogen) was used to synthesize the cDNA for the hybridizations. Each experiment consisted of two hybridizations, on two slides, and was carried out in Corning Hybridization Chambers at 42°C overnight. Dye swapping was performed to avoid dye-associated effects on cDNA synthesis. The slides were washed at increasing stringencies (2x SSC [1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate], 0.1% sodium dodecyl sulfate [SDS], 42°C; 0.1% SSC, 0.1% SDS, room temperature; 0.1% SSC, room temperature). Following hybridization, the microarrays were scanned for the Cy3 and Cy5 fluorescent signals with a ScanArray 4000 microarray scanner from GSI Lumonics (Watertown, MA). The intensity of every spot was codified as the sum of the intensities of all the pixels within a circle positioned over the spot itself and the background as the sum of the intensities of an identical number of pixels in the immediate surroundings of the circled spot. Cy3 and Cy5 values for each spot were normalized over the total intensity for each dye to account for differences in total intensity between the two scanned images. The consistency of the data obtained from the microarray analysis was evaluated by a pair-wise comparison, calculated with a two-tailed Student's t test and analyzed by the MEAN and TTEST procedures of SAS-STAT statistical software (SAS Institute, Cary, NC) . The signal intensity at each spot from the fur mutant and the WT were background subtracted, normalized, and used to calculate the ratio of gene expression between the two strains. All replicas were combined, and the median expression ratios and standard deviations were calculated for open reading frames (ORFs) showing 2.5-fold change.
2011-10-13 | E-GEOD-18441 | biostudies-arrayexpress
Project description:Lactobacillus acidophilus NCFM is an industrially important strain used extensively as a probiotic culture. Tolerance of the presence of bile is an attribute important to microbial survival in the intestinal tract. A whole-genome microarray was employed to examine the effects of bile on the global transcriptional profile of this strain, with the intention of elucidating genes contributing to bile tolerance. Genes involved in carbohydrate metabolism were generally induced, while genes involved in other aspects of cellular growth were mostly repressed. A 7-kb eight-gene operon encoding a two-component regulatory system (2CRS), a transporter, an oxidoreductase, and four hypothetical proteins was significantly upregulated in the presence of bile. Deletion mutations were constructed in six genes of the operon. Transcriptional analysis of the 2CRS mutants showed that mutation of the histidine protein kinase (HPK) had no effect on the induction of the operon, whereas the mutated response regulator (RR) showed enhanced induction when the cells were exposed to bile. These results indicate that the 2CRS plays a role in bile tolerance and that the operon it resides in is negatively controlled by the RR. Mutations in the transporter, the HPK, the RR, and a hypothetical protein each resulted in loss of tolerance of bile. Mutations in genes encoding another hypothetical protein and a putative oxidoreductase resulted in significant increases in bile tolerance. This functional analysis showed that the operon encoded proteins involved in both bile tolerance and bile sensitivity. Keywords: stress response
2008-04-05 | GSE11048 | GEO
Project description:Escherichia coli strains MG1655 and an isogenic norR::Tn5 mutant were grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 54 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.1 h-1. In order to establish anaerobic growth, nitrogen was sparged through the chemostat medium prior to inoculation and throughout the course of the experiment at a rate of 0.2 l/min. No dissolved oxygen was detectable using the OxyProbe. Sodium fumarate was added at a final concentration of 50 mM to act as a terminal electron acceptor. Cells were grown as above to steady-state, At steady-state, NOC-5 and NOC-7 were added to the chemostat culture and to the nutrient feed at a final concentration of 10 uM of each. Samples were taken after a period of 5 min exposure to NOC for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagen’s RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from Wild type and norR::Tn5 cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values Each strain was grown twice in seperate chemostat runs, exposed to NO. Samples were hybridised as WT vs NorR::Tn5 and each hybridisation had a corresponding dye-swap performed.
2006-08-31 | E-GEOD-5084 | biostudies-arrayexpress
Project description:This SuperSeries is composed of the following subset Series: GSE5075: Aerobic transcriptional responses of Escherichia coli to NO under defined chemostat conditions. GSE5076: Anaerobic transcriptional responses of Escherichia coli to NO under defined chemostat conditions. GSE5084: Anaerobic NO-exposed Chemostat Comparison of Wt & norR mutant Responses GSE5137: Aerobic NO-exposed Chemostat Comparison of Wt & norR mutant Responses GSE5139: Aerobic NO-exposed Chemostat Comparison of Wt & hmp mutant Responses Keywords: SuperSeries Refer to individual Series
2006-08-31 | E-GEOD-5098 | biostudies-arrayexpress
Project description:Batch cultures of Wild-type C. jejuni NCTC11168 were grown in 150 ml volumes of Mueller-Hinton broth in 250 ml baffled flasks. Microaerophilic conditions were generated using a MACS-VA500 microaerophilic work station (10 % O2, 10 % CO2, 80 % N2) from Don Whitley Scientific, Ltd which also maintained the growth temperature at 42 ºC. When mid-exponential phase was reached 0.25 mM GSNO was added to half of the cultures. After a 10 minute exposure samples of both treated and untreated cells were harvested into phenol/ethenol to stabilize the RNA and total RNA was purified using Qiagenâs RNeasy Mini kit (as recommended by the suppliers) prior to use in microarray analysis. A C. jejuni cgb mutant was grown in two parallel custom-built chemostats based on Sigma Proculture Dynalift spinner flasks with a working volume of 125 ml, and the dilution rate (which at steady state is equal to the specific growth rate) of 0.1 h-1. A gas mix of 10% O2, 10% CO2 and 80% N2 was passed into the head space of the culture vessel at a rate of 0.25 l min-1 to obtain a microaerobic atmosphere, and silicone water jackets maintained the temperature at 42 ºC. The flasks were placed on KMO 2 basic IKA-Werke stirrers (arbitrary setting, 260; Scientific Laboratory Supplies), which gaveeffective transfer of O2 from the gaseous atmosphere to the culture by virtue of a stable vortex. A fresh overflow sample was used to check the pH at the time of harvest (which was consistently between 6.6 and 7) and to ensure that there was no contamination by plating a 20 μl sample onto both nutrient agar plates incubated at 37 °C at atmospheric oxygen, and Mueller-Hinton plates incubated at 42 °C in the microaerophilic work station. When staedy-state was reached, as verified by collecting at least 5 culture volumes, GSNO (final concentration 0.25 mM) was added to one culture. After a further 10 min the 125 ml volume was separated into 3 equal volumes and each was mixed immediately on ice with 3.56 ml 100% ethanol and 185 ml phenol to stabilize the RNA. The cells were subsequently harvested by centrifugation. Total RNA was purified by using a Qiagen RNeasy Mini kit as recommended by the supplier. cDNA synthesis was carried out using 12 µg of starting material, which was primed with 9 µg of pd(N)6 random hexamers (Amersham Biosciences). Reaction mixtures (20 µl) containing 0.5 mM ATP, 0.5 mM TTP, 0.5 mM GTP, 0.2 mM CTP, and 1 mM Cy3- or 1 mM Cy5-dCTP were incubated for 2 h at 42 °C with 200 U of Superscript II RNase H reverse transcriptase (Invitrogen). Following synthesis, cDNA was purified by using a PCR purification kit (Qiagen) to remove the unincorporated deoxynucloside triphosphates, fluorescent dye, and primers. Equal volumes of cDNA were combined and evaporated to near dryness with an SPD121P Speed Vac (Thermon Savant). For hybridisation to the microarray slides, cDNA was resuspended in an appropriate volume of salt-based hybridization buffer (provided by Ocimum Biosolutions). Prior to addition to the slides, cDNA samples were heated to 95 °C for 3 min, and then placed on ice for no more than 3 min. The slides were placed in MWG Biotech hybridization chambers and incubated for 16 to 24 h in a shaking water bath at 110 rpm and 42 °C. Following incubation , the slides were washed sequentially for 5 min in 2x SSC-1 % sodium dodecyl sulphate, 1x SSC, 0.5x SSC and 0.1x SSC at 37 °C with gentle agitation (1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate). The slides were dried by centrifugation at 254 xg for 5 min and subsequently scanned with an Affymetrix 428 scanner. The average signal intensity and local background correction were obtained by using commercially available software from Biodiscovery, Inc. (Imagine version 4.0, and Genesight, version 3.5). The mean values from each channel were log2 transformed and normalized by using the subtract-by-mean method to remove intensity-dependent effects in the log2 (ratio) values. The Cy3/Cy5 fluorescence ratios were calculated from the normalized values. Biological experiments (i.e. chemostat growth with and without 0.25 mM GSNO addition) were carried out three times and a dye swap was performed for two of the three experiments which provided two technical repeats, one each for two of the three biological repeats. Data from the independent experiments were combined. Genes that were differentially expressed ⥠twofold and displayed and P value of ⤠0.05 (as determined by a t test) were defined as being statistically significantly differentially transcribed.
2010-06-30 | E-GEOD-5397 | biostudies-arrayexpress
Project description:Wild-type Campylobacter jejuni NCTC11168 was grown in 2 homemade, parallel chemostats. Cells were grown in 125 ml volumes of Mueller-Hinton Broth where the growth rate was controlled by the dilution rate (0.1 h-1). A gas mix of 80% nitrogen, 10% carbon dioxide and 10% oxygen was pumped into the head-space of the vessels at a rate of 0.25 l/min to obtain a microaerobic environment and the culture was maintained at 42 ºC via a water jacket. Cells were grown as above until steady-state had been reached. At steady-state one of the cultures was exposed to 10 uM NOC-5 & -7 (final concentration) for a period of 10 min. Samples of both the control and stressed cultures were harvested into phenol/ethanol to stabilize the RNA and total RNA was purified using Qiagenâ??s RNeasy Mini kit (as recommended by the suppliers) prior to use in microarray analysis. Equal quantities of RNA from control and GSNO-supplemented cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 4). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values. C. jejuni NCTC11168 was grown in two parallel custom-built chemostats based on Sigma Proculture Dynalift spinner flasks with a working volume of 125 ml, and the dilution rate (which at steady state is equal to the specific growth rate) of 0.1 h-1. A gas mix of 10% O2, 10% CO2 and 80% N2 was passed into the head space of the culture vessel at a rate of 0.25 l min-1 to obtain a microaerobic atmosphere, and silicone water jackets maintained the temperature at 42 ºC. The flasks were placed on KMO 2 basic IKA-Werke stirrers (arbitrary setting, 260; Scientific Laboratory Supplies), which gaveeffective transfer of O2 from the gaseous atmosphere to the culture by virtue of a stable vortex. A fresh overflow sample was used to check the pH at the time of harvest (which was consistently between 6.6 and 7) and to ensure that there was no contamination by plating a 20 μl sample onto both nutrient agar plates incubated at 37 °C at atmospheric oxygen, and Mueller-Hinton plates incubated at 42 °C in the microaerophilic work station. When staedy-state was reached, as verified by collecting at least 5 culture volumes, NOC-5 & -7 (final concentration 10 uM) was added to one culture. After a further 10 min the 125 ml volume was separated into 3 equal volumes and each was mixed immediately on ice with 3.56 ml 100% ethanol and 185 ml phenol to stabilize the RNA. The cells were subsequently harvested by centrifugation. Total RNA was purified by using a Qiagen RNeasy Mini kit as recommended by the supplier. cDNA synthesis was carried out using 12 µg of starting material, which was primed with 9 µg of pd(N)6 random hexamers (Amersham Biosciences). Reaction mixtures (20 µl) containing 0.5 mM ATP, 0.5 mM TTP, 0.5 mM GTP, 0.2 mM CTP, and 1 mM Cy3- or 1 mM Cy5-dCTP were incubated for 2 h at 42 °C with 200 U of Superscript II RNase H reverse transcriptase (Invitrogen). Following synthesis, cDNA was purified by using a PCR purification kit (Qiagen) to remove the unincorporated deoxynucloside triphosphates, fluorescent dye, and primers. Equal volumes of cDNA were combined and evaporated to near dryness with an SPD121P Speed Vac (Thermon Savant). For hybridisation to the microarray slides, cDNA was resuspended in an appropriate volume of salt-based hybridization buffer (provided by Ocimum Biosolutions). Prior to addition to the slides, cDNA samples were heated to 95 °C for 3 min, and then placed on ice for no more than 3 min. The slides were placed in MWG Biotech hybridization chambers and incubated for 16 to 24 h in a shaking water bath at 110 rpm and 42 °C. Following incubation , the slides were washed sequentially for 5 min in 2x SSC-1 % sodium dodecyl sulphate, 1x SSC, 0.5x SSC and 0.1x SSC at 37 °C with gentle agitation (1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate). The slides were dried by centrifugation at 254 xg for 5 min and subsequently scanned with an Affymetrix 428 scanner. The average signal intensity and local background correction were obtained by using commercially available software from Biodiscovery, Inc. (Imagine version 4.0, and Genesight, version 3.5). The mean values from each channel were log2 transformed and normalized by using the subtract-by-mean method to remove intensity-dependent effects in the log2 (ratio) values. The Cy3/Cy5 fluorescence ratios were calculated from the normalized values. Biological experiments (i.e. chemostat growth with and without 0.25 mM GSNO addition) were carried out three times and a dye swap was performed for two of the three experiments which provided two technical repeats, one each for two of the three biological repeats. Data from the independent experiments were combined. Genes that were differentially expressed â?¥ twofold and displayed and P value of â?¤ 0.05 (as determined by a t test) were defined as being statistically significantly differentially transcribed.
2010-06-30 | E-GEOD-5400 | biostudies-arrayexpress
Project description:Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 54 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.2 h-1. In order to establish anaerobic growth, nitrogen was sparged through the chemostat medium prior to inoculation and throughout the course of the experiment at a rate of 0.2 l/min. No dissolved oxygen was detectable using the OxyProbe. Sodium fumarate was added to anaerobic medium at a final concentration of 50 mM to act as a terminal electron acceptor. Cells were grown as above to steady-state, At steady-state, GSNO was added to the chemostat culture and to the nutrient feed at a final concentration of 200 uM unless otherwise stated. Samples were taken immediately prior to the addition of GSNO and after a period of 5 min exposure to GSNO for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagenâs RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from control and GSNO-supplemented cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values.
2010-06-10 | E-GEOD-2129 | biostudies-arrayexpress
Project description:Escherichia coli strain MG1655 was grown in a New Brunswick Scientific Bioflow III Biofermentor under continuous culture (chemostat) conditions. Cells were grown in defined media containing 54 mM glycerol as the sole and limiting source of energy and carbon. The working volume was 1 litre, and the dilution rate 0.2 h-1. For aerobic growth, the air-flow rate was 1 l/min, and the dissolved oxygen tension was maintained at 40% air saturation by measuring oxygen dissolved in the culture using a Broadley James D140 OxyProbe® electrode and automated adjustment of stirring rate. Cells were grown as above to steady-state, At steady-state, GSNO was added to the chemostat culture and to the nutrient feed at a final concentration of 200 uM unless otherwise stated. Samples were taken immediately prior to the addition of GSNO and after a period of 5 min exposure to GSNO for subsequent analysis using microarrays. Cells were harvested directly into RNA Protect (Qiagen) to stabilize RNA, and total RNA was purified using Qiagenâs RNeasy Mini kit as recommended by the suppliers. Equal quantities of RNA from control and GSNO-supplemented cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values.
2010-06-10 | E-GEOD-2095 | biostudies-arrayexpress
Project description:This SuperSeries is composed of the following subset Series: GSE12877: Transcriptional profiling of Escherichia coli after addition of CO-RMs to aerobically growing cells GSE12878: Transcriptional profiling of Escherichia coli after addition of CO-RMs to anaerobically growing cells Refer to individual Series
2010-06-24 | E-GEOD-13048 | biostudies-arrayexpress