Cellulose-induced and Nutrient limitation-induced regulation of Phanaerochaete chrysosporium genes
Ontology highlight
ABSTRACT:
ORGANISM(S): Phanerochaete chrysosporium
SUBMITTER: Dan Cullen
PROVIDER: E-GEOD-14736 | biostudies-arrayexpress |
REPOSITORIES: biostudies-arrayexpress
Publications
Transcriptome and secretome analyses of Phanerochaete chrysosporium reveal complex patterns of gene expression.
Vanden Wymelenberg Amber A Gaskell Jill J Mozuch Mike M Kersten Phil P Sabat Grzegorz G Martinez Diego D Cullen Dan D
Applied and environmental microbiology 20090417 12
The wood decay basidiomycete Phanerochaete chrysosporium was grown under standard ligninolytic or cellulolytic conditions and subjected to whole-genome expression microarray analysis and liquid chromatography-tandem mass spectrometry of extracellular proteins. A total of 545 genes were flagged on the basis of significant changes in transcript accumulation and/or peptide sequences of the secreted proteins. Under nitrogen or carbon limitation, lignin and manganese peroxidase expression increased r ...[more]
Similar Datasets
Project description:This SuperSeries is composed of the following subset Series: GSE27941: Lignocellulose-induced regulation of Phanaerochaete chrysosporium genes GSE29656: Postia placenta MAD-698 gene expression in ball-milled aspen or ball-milled pine medium Refer to individual Series
2011-06-02 | E-GEOD-29659 | biostudies-arrayexpress
Project description:Transcript profiles of Phanerochaete chrysosporium grown on different substrates were analyszed. Array design was based on the DoE's Joint Genome Institute's gene models for P. chrysosporium version s. The research goal is to identify genes essential for lignocellulose depolymerization. From a data set of 10004 unique gene models, each NimbleGen (Madison, WI) array targeted 9959 genes and featured 12 unique 60mers per gene, all in triplicate. RNA and protein were obtained from P. chrysosporium strain RP78 (Forest Mycology Center, Forest Products Lab) grown in HighleyM-bM-^@M-^Ys basal salt medium containing 0.5% (w/v) wiley milled (1 mm mesh) wood. For each of the three samples (hybrid line P717, transgenic line 82, transgenic line 64) multiple branches were harvested, debarked and dried. Each two-liter Erlenmeyer flask contained 250 ml medium and was inoculated with approximately 10e7 P. chrysosporium spores scraped from the surface of YMPG agar. Cultures were incubated for five days on a rotary shaker (150 RPM) at 37M-BM-0 C. For RNA, mycelium from triplicate cultures was collected by filtration through Miracloth (Calbiochem, EMD Biosciences, Gibbstown, NJ), squeeze dried and snap frozen in liquid nitrogen. Pellets were stored at -80 M-BM-0C until use. For mass spectroscopic analysis, culture filtrates were stored at -20 before use. P. chrysosporium Roche NimbleGen array design was similar to GPL8022, but repetitive elements were removed and 25 gene targets were added. The latter corresponded to open reading frames for which peptides had been detected in culture filtrates. Culture condition compariso: Total RNA was purified from frozen mycelial pellets, converted to Cy3 labeled cDNA, hybridized to microarrays, and scanned as described by Vanden Wymelenberg et al 2010 (Appl Enviro Microbiol 76:3599-3610). The 9 arrays used in these experiments were scanned on the Axon4000B Scanner (Molecular Dynamics) and data extracted using NimbleScan v2.4. Quantile normalization and robust multi-array averaging (RMA) were applied to the raw data using DNASTAR ArrayStar v4 (Madison, WI). Expression levels are based on log2 signals and significant differences in expression were determined using the Moderated t-Test with the FDR threshold set at P<0.05. triplicate cultures for each substrate (wood genotype); The three wood substrates are lines 64, 82 and P717; three different media, and each medium was represented by three flasks (reps).
2014-01-15 | E-GEOD-52922 | biostudies-arrayexpress
Project description:Transcript profiles of Phanerochaete chrysosporium grown on carbon-limited medium, nitrogen-limited medium and replete medium. Array design based on the DoE's Joint Genome Institute's v2.1 annotation. Goal is to define genes involved in lignin degradation. Keywords: gene expression under three different culture conditions From a data set of 10,004 unique alleles, each Roche NimbleGen (Madison, WI) array featured 12 unique 60mer probes per gene, all in triplicate. (Seven gene models composed mostly of repetitive DNA were represented by only 2 to 11 60mers.) Total RNA was purified from the five abovementioned media. In short, cultures were harvested by filtering through Miracloth (Calbiochem, EMD Biosciences, Gibbstown, NJ), squeeze dried and snap frozen in liquid nitrogen. Pellets were stored at -80 C until use. Extraction buffer was prepared by combining 10 ml 690 mM para-aminosalicylic acid (sodium salt) (Sigma-Aldrich, St. Louis, MO) with 10 ml 56 mM triisopropylnapthalene sulfonic acid (sodium salt) (Sigma-Aldrich), and placed on ice. To this was added 5 ml 5X RNB (1.0 M Tris, 1.25 M NaCl, 0.25 M EGTA). The pH of the 5X RNB was adjusted to 8.5 with NaOH. The mixture was kept on ice and shaken just before use. Frozen fungal pellets were ground to a fine powder with liquid nitrogen in an acid washed, pre-chilled mortar and pestle. The ground mycelia were transferred to Falcon 2059 tubes (VWR International, West Chester, PA), and extraction buffer was added to make a thick slurry. The samples were vortexed vigorously and placed on ice until all samples were processed. One half volume TE-saturated phenol (Sigma-Aldrich) and ¼ volume chloroform (Sigma-Aldrich) were added to each sample and vortexed vigorously. Samples were spun at 2940 x g in a fixed-angle rotor for 5 minutes. The aqueous layer was removed to a new tube, and phenol:chloroform extractions were repeated until the interface between the aqueous and organic layers was clear. The final aqueous extractions were placed in clean 2059 tubes, to which was added 0.1 volume 3M sodium acetate, pH 5.2, (DEPC-treated) and 2 volumes absolute ethanol. The tubes were shaken vigorously and stored overnight at -20˚C. The tubes were spun 1 hour at 2940 x g, the supernatants were decanted, and the pellets were resuspended in 4 ml RNase-free H2O. Total RNA was purified using the RNeasy Maxi kit (Qiagen, Valencia, CA) according to the manufacturer’s protocol for RNA cleanup. RNAs were eluted from the RNeasy spin columns using two spins, for a final volume of 2 ml. The eluted RNAs were ethanol precipitated and stored overnight at -20˚C. The RNAs were spun 1 hour at 2940 x g, washed 1x with 70% ethanol, and resuspended in 50-100ul RNase-free H2O. Three biological replicates per medium were used (15 separate arrays). RNA was converted to double-strand cDNA and labeled with the Cy3 fluorophore sample for hybridization to the array by Roche NimbleGen (Iceland). In brief, 10ug of total RNA was incubated with 1X first strand buffer, 10 mM DTT, 0.5mM dNTPs, 100 pM oligo T7 d(T)24 primer, and 400U of SuperScript II (Invitrogen) for 60 min at 42˚C. Second strand cDNA was synthesized by incubation with 1X second strand buffer, 0.2mM dNTPs, 0.07U/ul DNA ligase (Invitrogen), 0.27U/ul DNA polymerase I (Invitrogen), 0.013U/ul RNase H (Invitrogen), at 16˚C for 2 hours. Immediately following, 10U T4 DNA polymerase (Invitrogen) was added for additional 5 minute incubation at 16˚C. Double-stranded cDNA was treated with 27ng/ul of RNase A (EpiCenter Technologies) for 10 minutes at 37˚C. Treated cDNA was purified using an equal volume of phenol:chloroform:isoamyl alcohol (Ambion), ethanol precipitated, washed with 80% ethanol, and resuspended in 20ul water. One ug of each cDNA sample was amplified and labeled with 1 unit per ul of Klenow Fragment (New England BioLabs) and 1 O.D. unit of Cy3 fluorophore (TriLink Biotechnologies, Inc.) for 2 hours at 37˚C. Array hybridization was carried out with 6ug of labeled cDNA suspended in NimbleGen hybridization solution for 17 hours at 42˚C. Arrays were scanned on the Axon4000B Scanner (Molecular Dynamics) and data was extracted from the scanned image using NimbleScan v2.4. DNASTAR ArrayStar v2.1 (Madison,WI) software was used to quantify and visualize data. Analyses were based on three biological replicates per culture medium. Quantile normalization and robust multi-array averaging (RMA; ) were applied to the entire dataset.
2009-03-30 | E-GEOD-14735 | biostudies-arrayexpress
Project description:Transcript profiles of Phanerochaete chrysosporium grown on different substrates were analyzed. Array design based on the DoE's Joint Genome Institute's v2.1 annotation. Goal is to define genes involved in cellulose degradation. Keywords: gene expression under different culture conditions From a data set of 10,004 unique alleles, each Roche NimbleGen (Madison, WI) array featured 12 unique 60mer probes per gene, all in triplicate. (Seven gene models composed mostly of repetitive DNA were represented by only 2 to 11 60mers.) Total RNA was purified from below mentioned media. In short, cultures were harvested by filtering through Miracloth (Calbiochem, EMD Biosciences, Gibbstown, NJ), squeeze dried and snap frozen in liquid nitrogen. Pellets were stored at -80 C until use. Extraction buffer was prepared by combining 10 ml 690 mM para-aminosalicylic acid (sodium salt) (Sigma-Aldrich, St. Louis, MO) with 10 ml 56 mM triisopropylnapthalene sulfonic acid (sodium salt) (Sigma-Aldrich), and placed on ice. To this was added 5 ml 5X RNB (1.0 M Tris, 1.25 M NaCl, 0.25 M EGTA). The pH of the 5X RNB was adjusted to 8.5 with NaOH. The mixture was kept on ice and shaken just before use. Frozen fungal pellets were ground to a fine powder with liquid nitrogen in an acid washed, pre-chilled mortar and pestle. The ground mycelia were transferred to Falcon 2059 tubes (VWR International, West Chester, PA), and extraction buffer was added to make a thick slurry. The samples were vortexed vigorously and placed on ice until all samples were processed. One half volume TE-saturated phenol (Sigma-Aldrich) and ¼ volume chloroform (Sigma-Aldrich) were added to each sample and vortexed vigorously. Samples were spun at 2940 x g in a fixed-angle rotor for 5 minutes. The aqueous layer was removed to a new tube, and phenol:chloroform extractions were repeated until the interface between the aqueous and organic layers was clear. The final aqueous extractions were placed in clean 2059 tubes, to which was added 0.1 volume 3M sodium acetate, pH 5.2, (DEPC-treated) and 2 volumes absolute ethanol. The tubes were shaken vigorously and stored overnight at -20˚C. The tubes were spun 1 hour at 2940 x g, the supernatants were decanted, and the pellets were resuspended in 4 ml RNase-free H2O. total RNA was purified using the RNeasy Maxi kit (Qiagen, Valencia, CA) according to the manufacturer’s protocol for RNA cleanup. RNAs were eluted from the RNeasy spin columns using two spins, for a final volume of 2 ml. The eluted RNAs were ethanol precipitated and stored overnight at -20˚C. The RNAs were spun 1 hour at 2940 x g, washed 1x with 70% ethanol, and resuspended in 50-100ul RNase-free H2O. Three biological replicates per medium were used (15 separate arrays). RNA was converted to double-strand cDNA and labeled with the Cy3 fluorophore sample for hybridization to the array by Roche NimbleGen (Iceland). In brief, 10ug of total RNA was incubated with 1X first strand buffer, 10 mM DTT, 0.5mM dNTPs, 100 pM oligo T7 d(T)24 primer, and 400U of SuperScript II (Invitrogen) for 60 min at 42˚C. Second strand cDNA was synthesized by incubation with 1X second strand buffer, 0.2mM dNTPs, 0.07U/ul DNA ligase (Invitrogen), 0.27U/ul DNA polymerase I (Invitrogen), 0.013U/ul RNase H (Invitrogen), at 16˚C for 2 hours. Immediately following, 10U T4 DNA polymerase (Invitrogen) was added for additional 5 minute incubation at 16˚C. Double-stranded cDNA was treated with 27ng/ul of RNase A (EpiCenter Technologies) for 10 minutes at 37˚C. Treated cDNA was purified using an equal volume of phenol:chloroform:isoamyl alcohol (Ambion), ethanol precipitated, washed with 80% ethanol, and resuspended in 20ul water. One ug of each cDNA sample was amplified and labeled with 1 unit per ul of Klenow Fragment (New England BioLabs) and 1 O.D. unit of Cy3 fluorophore (TriLink Biotechnologies, Inc.) for 2 hours at 37˚C. Array hybridization was carried out with 6ug of labeled cDNA suspended in NimbleGen hybridization solution for 17 hours at 42˚C. Arrays were scanned on the Axon4000B Scanner (Molecular Dynamics) and data was extracted from the scanned image using NimbleScan v2.4. DNASTAR ArrayStar v2.1 (Madison,WI) software was used to quantify and visualize data. Analyses were based on three biological replicates per culture medium. Quantile normalization and robust multi-array averaging (RMA) were applied to the entire dataset.
2009-03-30 | E-GEOD-14734 | biostudies-arrayexpress
Project description:Transcript profiles of Phanerochaete chrysosporium grown on ball-milled aspen or ball-milled pine were analyzed. Array design based on the DoE's Joint Genome Institute's v2.1 annotation. Goal is to define genes involved in lignocellulose degradation. From a data set of 10,004 unique alleles, each Roche NimbleGen (Madison, WI) array featured 12 unique 60mer probes per gene, all in triplicate. (Seven gene models composed mostly of repetitive DNA were represented by only 2 to 11 60mers.) Total RNA was purified from medium containing ball-milled aspen or ball-milled pine as the sole carbon source. In short, cultures were harvested by filtering through Miracloth (Calbiochem, EMD Biosciences, Gibbstown, NJ), squeeze dried and snap frozen in liquid nitrogen. Pellets were stored at -80 C until use. Extraction buffer was prepared by combining 10 ml 690 mM para-aminosalicylic acid (sodium salt) (Sigma-Aldrich, St. Louis, MO) with 10 ml 56 mM triisopropylnapthalene sulfonic acid (sodium salt) (Sigma-Aldrich), and placed on ice. To this was added 5 ml 5X RNB (1.0 M Tris, 1.25 M NaCl, 0.25 M EGTA). The pH of the 5X RNB was adjusted to 8.5 with NaOH. The mixture was kept on ice and shaken just before use. Frozen fungal pellets were ground to a fine powder with liquid nitrogen in an acid washed, pre-chilled mortar and pestle. The ground mycelia were transferred to Falcon 2059 tubes (VWR International, West Chester, PA), and extraction buffer was added to make a thick slurry. The samples were vortexed vigorously and placed on ice until all samples were processed. One half volume TE-saturated phenol (Sigma-Aldrich) and M-BM-< volume chloroform (Sigma-Aldrich) were added to each sample and vortexed vigorously. Samples were spun at 2940 x g in a fixed-angle rotor for 5 minutes. The aqueous layer was removed to a new tube, and phenol:chloroform extractions were repeated until the interface between the aqueous and organic layers was clear. The final aqueous extractions were placed in clean 2059 tubes, to which was added 0.1 volume 3M sodium acetate, pH 5.2, (DEPC-treated) and 2 volumes absolute ethanol. The tubes were shaken vigorously and stored overnight at -20M-KM-^ZC. The tubes were spun 1 hour at 2940 x g, the supernatants were decanted, and the pellets were resuspended in 4 ml RNase-free H2O. Total RNA was purified using the RNeasy Maxi kit (Qiagen, Valencia, CA) according to the manufacturerM-bM-^@M-^Ys protocol for RNA cleanup. RNAs were eluted from the RNeasy spin columns using two spins, for a final volume of 2 ml. The eluted RNAs were ethanol precipitated and stored overnight at -20M-KM-^ZC. The RNAs were spun 1 hour at 2940 x g, washed 1x with 70% ethanol, and resuspended in 50-100ul RNase-free H2O. Three biological replicates per medium were used (6 separate arrays). RNA was converted to double-strand cDNA and labeled with the Cy3 fluorophore sample for hybridization to the array by Roche NimbleGen (Iceland). In brief, 10ug of total RNA was incubated with 1X first strand buffer, 10 mM DTT, 0.5mM dNTPs, 100 pM oligo T7 d(T)24 primer, and 400U of SuperScript II (Invitrogen) for 60 min at 42M-KM-^ZC. Second strand cDNA was synthesized by incubation with 1X second strand buffer, 0.2mM dNTPs, 0.07U/ul DNA ligase (Invitrogen), 0.27U/ul DNA polymerase I (Invitrogen), 0.013U/ul RNase H (Invitrogen), at 16M-KM-^ZC for 2 hours. Immediately following, 10U T4 DNA polymerase (Invitrogen) was added for additional 5 minute incubation at 16M-KM-^ZC. Double-stranded cDNA was treated with 27ng/ul of RNase A (EpiCenter Technologies) for 10 minutes at 37M-KM-^ZC. Treated cDNA was purified using an equal volume of phenol:chloroform:isoamyl alcohol (Ambion), ethanol precipitated, washed with 80% ethanol, and resuspended in 20ul water. One ug of each cDNA sample was amplified and labeled with 1 unit per ul of Klenow Fragment (New England BioLabs) and 1 O.D. unit of Cy3 fluorophore (TriLink Biotechnologies, Inc.) for 2 hours at 37M-KM-^ZC. Array hybridization was carried out with 6ug of labeled cDNA suspended in NimbleGen hybridization solution for 17 hours at 42M-KM-^ZC. Arrays were scanned on the Axon4000B Scanner (Molecular Dynamics) and data was extracted from the scanned image using NimbleScan v2.4. DNASTAR ArrayStar v2.1 (Madison,WI) software was used to quantify and visualize data. Analyses were based on three biological replicates per culture medium. Quantile normalization and robust multi-array averaging (RMA) were applied to the entire dataset.
2011-06-02 | E-GEOD-27941 | biostudies-arrayexpress
Project description:Transscript profiles of Postia placenta grown on different substrates were analyszed. Array design was based on the DoE's Joint Genome Institute's gene models for P. placenta version 1. The research goal is to identtify genes essential for cellulose depolymerization. Keywords: Culture condition comparison From a data set of 12,438 unique alleles, each NimbleGen (Madison, WI) array featured 10 unique 60mers per gene, all in triplicate. The dataset was manually annotated to include only the âbest allelic modelâ among CAZY-encoding genes (SI Table 1, appended as a supplementary file). Total RNA was purified from 6-day old cultures containing microcrystalline cellulose (Avicel) or glucose as sole carbon source. Three biological replicates per medium were used (6 separate arrays). RNA was converted to double-strand cDNA and labeled with the Cy3 fluorophore sample for hybridization to the Postia placenta MAD-698 whole genome 37K expression array by Roche NimbleGen (Iceland). In brief, 10ug of total RNA was incubated with 1X first strand buffer, 10 mM DTT, 0.5mM dNTPs, 100 pM oligo T7 d(T)24 primer, and 200 units of SuperScript II (Invitrogen) for 60 min at 42°C. Second strand cDNA was synthesized by incubation with 1X second strand buffer, 0.2mM dNTPs, 0.07 units per ul DNA ligase (Invitrogen), 0.27 units per ul DNA polymerase I (Invitrogen), 0.013 units per ul RNase H (Invitrogen), at 16°C for 2 hours. Immediately following, 10 units T4 DNA polymerase (Invitrogen) was added for additional 5 minute incubation at 16°C. Double-stranded cDNA was treated with 27ng/ul of RNase A (EpiCenter Technologies) for 10 minutes at 37°C. Treated cDNA was purified using an equal volume of phenol:chloroform:isoamyl alcohol (Ambion), ethanol precipitated, washed with 80% ethanol, and resuspended in 20ul water. One ug of each cDNA sample was amplified and labeled with 1 unit per ul of Klenow Fragment (New England BioLabs) and 1 O.D unit of Cy3 fluorophore (TriLink Biotechnologies, Inc.) for 2 hours at 37°C. Array hybridization was carried out with 6ug of labeled cDNA suspended in NimbleGen hybridization solution for 17 hours at 42°C. Supplementary file 'si_figure_3.jpg' represents a Neighbor-Joining tree of the cytochrome P450 contingent (P450ome) of P. placenta. The tree shows 254 P450 proteins clustered into 11 fungal clans (indicated by different clan specific color at the branch point). The unrooted phylogenetic tree was constructed using MEGA4 phylogenetic analyses program with 1000 bootstrap replications. Evolutionary distances were computed using the Poisson correction method and are in the units of the number of amino acid substitutions per site. All positions containing gaps and missing data were eliminated from the dataset.
2010-05-14 | E-GEOD-12540 | biostudies-arrayexpress
Project description:Transscript profiles of Ceriporiopsis subvermispora grown on different substrates were analyszed. Array design was based on the DoE's Joint Genome Institute's gene models for C. subvermispora version 1. The research goal is to identtify genes essential for lignocellulose depolymerization. From a data set of 12,125 unique gene models, each NimbleGen (Madison, WI) array targeted 12083 genes and featured 8 unique 60mers per gene, all in quadruplicate. Total RNA was purified from 5-day old cultures containing microcrystalline cellulose (Avicel) or glucose or ball-milled Populus as sole carbon source. Three biological replicates per medium were used (9 separate arrays). In short, cultures were harvested by filtering through Miracloth (Calbiochem, EMD Biosciences, Gibbstown, NJ), squeeze dried and snap frozen in liquid nitrogen. Pellets were stored at -80 C until use. Extraction buffer was prepared by combining 10 ml 690 mM para-aminosalicylic acid (sodium salt) (Sigma-Aldrich, St. Louis, MO) with 10 ml 56 mM triisopropylnapthalene sulfonic acid (sodium salt) (Sigma-Aldrich), and placed on ice. To this was added 5 ml 5X RNB (1.0 M Tris, 1.25 M NaCl, 0.25 M EGTA). The pH of the 5X RNB was adjusted to 8.5 with NaOH. The mixture was kept on ice and shaken just before use. Frozen fungal pellets were ground to a fine powder with liquid nitrogen in an acid washed, pre-chilled mortar and pestle. The ground mycelia were transferred to Falcon 2059 tubes (VWR International, West Chester, PA), and extraction buffer was added to make a thick slurry. The samples were vortexed vigorously and placed on ice until all samples were processed. One half volume TE-saturated phenol (Sigma-Aldrich) and ¼ volume chloroform (Sigma-Aldrich) were added to each sample and vortexed vigorously. Samples were spun at 2940 x g in a fixed-angle rotor for five minutes. The aqueous layer was removed to a new tube, and phenol:chloroform extractions were repeated until the interface between the aqueous and organic layers was clear. The final aqueous extractions were placed in clean 2059 tubes, to which was added 0.1 volume 3M sodium acetate, pH 5.2, (DEPC-treated) and two volumes absolute ethanol. The tubes were shaken vigorously and stored overnight at -20 0C. The tubes were spun 1 hour at 2940 x g, the supernatants were decanted, and the pellets were resuspended in 4 ml RNase-free H2O. Total RNA was purified using the RNeasy Maxi kit (Qiagen, Valencia, CA) according to the manufacturer’s protocol for RNA cleanup. RNAs were eluted from the RNeasy spin columns using two spins, for a final volume of 2 ml. The eluted RNAs were ethanol precipitated and stored overnight at -20C. The RNAs were spun one hour at 2940 x g, washed once with 70% ethanol, and resuspended in 50-100 ?l RNase-free H2O. Three biological replicates per medium were used (nine separate arrays). RNA was converted to double-strand cDNA using Invitrogen's ds cDNA Synthesis kit (Carlsbad, CA) and labeled with the Cy3 fluorophore sample for hybridization to the array by Roche NimbleGen (Iceland). In brief, 10 ?g of total RNA was incubated with 1X first strand buffer, 10 mM DTT, 0.5 mM dNTPs, 100pM oligo T7 d(T)24 primer, and 400U of SuperScript II (Invitrogen) for 60 min at 42°C. Second strand cDNA was synthesized by incubation with 1X second strand buffer, 0.2 mM dNTPs, 0.07 U/ul DNA ligase (Invitrogen, Carlsbad, CA), 0.27 U/ul DNA polymerase I (Invitrogen, Carlsbad, CA), 0.013 U/ul RNase H (Invitrogen), at 16°C for two hours. Immediately following, 10U T4 DNA polymerase (Invitrogen) was added for an additional five minute incubation at 16°C. Double-stranded cDNA was treated with 27 ng/ul of RNase A (EpiCentre Technologies, Madison, WI) for 10 min at 37°C. Treated cDNA was purified using an equal volume of phenol:chloroform:isoamyl alcohol (Ambion/Life Technologies, Grand Island, NY), ethanol precipitated, washed with 80% ethanol, and resuspended in 20 ?l water. One ?g of each cDNA sample was amplified and labeled with one unit per ?l of Klenow Fragment (New England BioLabs, UK) and one OD unit of Cy3 fluorophore (TriLink Biotechnologies, Inc., San Diego, CA) for two hours at 37°C. Array hybridization was carried out with 6 ?g of labeled cDNA suspended in NimbleGen hybridization solution for 17 hours at 42°C. Arrays were scanned on the Axon 4000B Scanner (Molecular Devices, Sunnyvale, CA) and data was extracted from the scanned image using NimbleScan v2.4. DNASTAR ArrayStar v4 (Madison, WI) software was used to quantify and visualize data. .
2012-03-05 | E-GEOD-34636 | biostudies-arrayexpress
Project description:Transcript profiles of Postia placenta grown on media containing ball-milled aspen or ball-milled pine as the sole carbon source were analyzed. Array design was based on the DoE's Joint Genome Institute's gene models for P. placenta version 1. The research goal is to identtify genes essential for cellulose depolymerization. From a data set of 12,438 unique alleles, each NimbleGen (Madison, WI) array featured 10 unique 60mers per gene, all in triplicate. The dataset was manually annotated to include only the ‘best allelic model’ among CAZY-encoding genes. Total RNA was purified from medium containing ball-milled aspen or ball-milled pine as the sole carbon source. Three biological replicates per medium were used (6 separate arrays). RNA was converted to double-strand cDNA and labeled with the Cy3 fluorophore sample for hybridization to the Postia placenta MAD-698 whole genome expression array by Roche NimbleGen (Iceland). In brief, 10ug of total RNA was incubated with 1X first strand buffer, 10 mM DTT, 0.5mM dNTPs, 100 pM oligo T7 d(T)24 primer, and 200 units of SuperScript II (Invitrogen) for 60 min at 42°C. Second strand cDNA was synthesized by incubation with 1X second strand buffer, 0.2mM dNTPs, 0.07 units per ul DNA ligase (Invitrogen), 0.27 units per ul DNA polymerase I (Invitrogen), 0.013 units per ul RNase H (Invitrogen), at 16°C for 2 hours. Immediately following, 10 units T4 DNA polymerase (Invitrogen) was added for additional 5 minute incubation at 16°C. Double-stranded cDNA was treated with 27ng/ul of RNase A (EpiCenter Technologies) for 10 minutes at 37°C. Treated cDNA was purified using an equal volume of phenol:chloroform:isoamyl alcohol (Ambion), ethanol precipitated, washed with 80% ethanol, and resuspended in 20ul water. One ug of each cDNA sample was amplified and labeled with 1 unit per ul of Klenow Fragment (New England BioLabs) and 1 O.D unit of Cy3 fluorophore (TriLink Biotechnologies, Inc.) for 2 hours at 37°C. Array hybridization was carried out with 6ug of labeled cDNA suspended in NimbleGen hybridization solution for 17 hours at 42°C.
2011-06-02 | E-GEOD-29656 | biostudies-arrayexpress
Project description:Plants and microalgae have the ability to harness sunlight into energy dense molecules such as triacylglycerols (TAGs). TAGs hold great importance for human and animal nutrition, and are also a source for renewable energy. Acyl-CoA-dependent TAG synthesis by diacylglycerol acyltransferases (DGATs) in oilseeds has been well characterized, but how the ectopic introduction of TAG synthesis in vegetative tissues of plants affects metabolism is largely unknown. Here we report the identification and characterization of several Chlamydomonas reinhardtii Diacylglycerol Acyltransferase Type Two (DGTT) enzymes and their use in engineering TAG biosynthesis in plant vegetative tissues. Focusing on DGTT2 we demonstrate that it can accept a broad range of substrates. Production of DGTT2 in Arabidopsis results in distinct seedling phenotypes and accumulation of TAG with very long chain fatty acids (VLCFA), in both seedlings (23.4-fold increase) and in the leaves of soil-grown plants (13.3-fold increase). Levels of surface lipids, such as waxes and cutins, are decreased in DGTT2-producing lines, consistent with a decreased carbon/acyl flux to the surface lipid pathway. Global transcript analysis showed that very few genes had altered expression. Little to no change in the transcripts of wax/cutin pathway genes was observed in response to altered carbon partitioning into TAGs in the leaves suggesting that the supply of acyl groups for surface lipid biosynthesis is not transcriptionally adjusted in the transgenic lines. As an indication that the DGTT2-producing plants are richer in feed value, the generalist herbivore Spodoptera exigua reared on the transgenic plants gained more weight. Apparently, the substrate specificity of DGTT2 from Chlamydomonas when produced in the Arabidopsis cells leads to diversion of carbon from surface compounds in TAGs and enhances the nutritional value of leaves. 4 biological replicates DGTT2 transgenic plants are compared to 4 biological replicates of wild type
2014-06-16 | E-GEOD-38898 | biostudies-arrayexpress
Project description:In a previous study, we found that H2S alleviates salinity stress in cucumber by maintaining the Na+/K+ balance and by regulating H2S metabolism and the oxidative stress response. However, little is known about the molecular mechanisms behind H2S-regulated salt-stress tolerance in cucumber. Here, an integrated transcriptomic and proteomic analysis based on RNA-seq and 2-DE was used to investigate the global mechanism underlying H2S-regulated salt-stress tolerance. In total, 11 761 differentially expressed genes (DEGs) and 61 differentially expressed proteins (DEPs) were identified. Analysis of the pathways associated with the DEGs showed that salt stress enriched expression of genes in primary and energy metabolism, such as photosynthesis, carbon metabolism and biosynthesis of amino acids. Application of H2S significantly decreased these DEGs but enriched DEGs related to plant-pathogen interaction, sulfur-containing metabolism, cell defense and signal transduction pathways. Notably, changes related to sulfur-containing metabolism and cell defense were also observed through proteome analysis, such as Cysteine synthase 1, Glutathione S-transferase U25-like, Protein disulfide-isomerase and Peroxidase 2. We present the first global analysis of the mechanism underlying H2S regulation of salt-stress tolerance in cucumber through tracking changes in the expression of specific proteins and genes.
2021-09-09 | PXD020642 | Pride