Expression profiling of Gastric Cancers
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
SUBMITTER: Amit Aggarwal
PROVIDER: E-GEOD-2669 | biostudies-arrayexpress |
REPOSITORIES: biostudies-arrayexpress
Similar Datasets
Project description:124 gastric biopsies comprising of Normals, Intestinal Metaplasia, Chronic Gastritis and Carcinomas are profiled. The ratio metric is given by (Biological sample / Universal Reference). The Biological Samples are labeled with Cy5 (Green) and the Pooled Normal Biopsies RNA is always labeled with Cy3 (Red). The arrays were scanned using a ScanArray 5000 scanner (Perkin-Elmer) and data extraction was done using Quantarray (GSI Lumonics). Subsequently, the data was imported into GeneSpring (Silicon Genetics) and intensity dependent LOWESS normalization was performed. The 7383 genes were filtered using an intensity in the reference channel (Cy3) of 300. This corresponded to 2 standard deviations above the mean for the background signal. Background singal was calculated using the empty wells/spots on the array and the average of 4 different positions on the slide were used. Keywords: other
2005-07-25 | GSE2669 | GEO
Project description:To identify Six1 target genes, we chose the mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney. The cells were infected with adenovirus vectors (AxCAwt) overexpressing VP16-Six1wt or VP16-Six1W171R and cultured for 24h. Total RNA was extracted using Isogen reagent (Nippon Gene), treated with RNase-free DNase (Roche Diagnostics) and purified with RNeasy Midi Kit (QIAGEN). Poly A+ RNA was selected using Oligotex-dT30 latex beads (TaKaRa). Poly A+ RNA (20 µg) was reverse transcribed using an oligo(dT) primer in the presence of aminoallyl dUTP without the addition of spike-in controls. Then, single-stranded cDNAs were coupled with Cy3 (AxCAwt VP16-Six1wt infected sample) or Cy5 (AxCAwt VP16-Six1W171R infected sample) dyes, and the labeled probes were purified with QIAquick PCR Purification kit (QIAGEN). Hybridization to the microarray was carried out at 65°C for 17h according to the manufacturer's instruction. The arrays were washed, dried and scanned using ScanArray 5000 (GSI Lumonics) at two different PMT voltage settings (high and low) to avoid signal saturation. Cy3 and Cy5 intensities for each spot on the array were determined by QuantArray software (Version 3.0.0.0, GSI Lumonics). The raw data thus obtained was processed and the Cy3 to Cy5 ratios were calculated as follows: 1) subtraction of the fluorescence intensity of negative control spots as background from the intensity of each of the Cy3 and Cy5 spots, 2) normalization of the entire data set using the global normalization method, 3) elimination of spots with high background intensity for either dye, and 4) determination of the Cy3 to Cy5 ratios. To identify Six4 target genes, we chose the mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney. The cells were infected with adenovirus vectors (AxCAwt) overexpressing VP16-Six4wt or VP16-Six4W263R and cultured for 24h. Total RNA was extracted using Isogen reagent (Nippon Gene), treated with RNase-free DNase (Roche Diagnostics) and purified with RNeasy Midi Kit (QIAGEN). Poly A+ RNA was selected using Oligotex-dT30 latex beads (TaKaRa). Poly A+ RNA (20 µg) was reverse transcribed using an oligo(dT) primer in the presence of aminoallyl dUTP without the addition of spike-in controls. Then, single-stranded cDNAs were coupled with Cy3 (AxCAwt VP16-Six4wt infected sample) or Cy5 (AxCAwt VP16-Six4W263R infected sample) dyes, and the labeled probes were purified with QIAquick PCR Purification kit (QIAGEN). Hybridization to the microarray was carried out at 65°C for 17h according to the manufacturer's instruction. The arrays were washed, dried and scanned using ScanArray 5000 (GSI Lumonics) at two different PMT voltage settings (high and low) to avoid signal saturation. Cy3 and Cy5 intensities for each spot on the array were determined by QuantArray software (Version 3.0.0.0, GSI Lumonics). The raw data thus obtained was processed and the Cy3 to Cy5 ratios were calculated as follows: 1) subtraction of the fluorescence intensity of negative control spots as background from the intensity of each of the Cy3 and Cy5 spots, 2) normalization of the entire data set using the global normalization method, 3) elimination of spots with high background intensity for either dye, and 4) determination of the Cy3 to Cy5 ratios.
2009-05-13 | E-GEOD-2043 | biostudies-arrayexpress
Project description:To identify Six1 target genes, we chose the mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney. The cells were infected with adenovirus vectors (AxCAwt) overexpressing VP16-Six1wt or VP16-Six1W171R and cultured for 24h. Total RNA was extracted using Isogen reagent (Nippon Gene), treated with RNase-free DNase (Roche Diagnostics) and purified with RNeasy Midi Kit (QIAGEN). Poly A+ RNA was selected using Oligotex-dT30 latex beads (TaKaRa). Poly A+ RNA (20 µg) was reverse transcribed using an oligo(dT) primer in the presence of aminoallyl dUTP without the addition of spike-in controls. Then, single-stranded cDNAs were coupled with Cy3 (AxCAwt VP16-Six1wt infected sample) or Cy5 (AxCAwt VP16-Six1W171R infected sample) dyes, and the labeled probes were purified with QIAquick PCR Purification kit (QIAGEN). Hybridization to the microarray was carried out at 65°C for 17h according to the manufacturer's instruction. The arrays were washed, dried and scanned using ScanArray 5000 (GSI Lumonics) at two different PMT voltage settings (high and low) to avoid signal saturation. Cy3 and Cy5 intensities for each spot on the array were determined by QuantArray software (Version 3.0.0.0, GSI Lumonics). The raw data thus obtained was processed and the Cy3 to Cy5 ratios were calculated as follows: 1) subtraction of the fluorescence intensity of negative control spots as background from the intensity of each of the Cy3 and Cy5 spots, 2) normalization of the entire data set using the global normalization method, 3) elimination of spots with high background intensity for either dye, and 4) determination of the Cy3 to Cy5 ratios. To identify Six4 target genes, we chose the mK4 cell line that represents later metanephric mesenchyme of the embryonic kidney. The cells were infected with adenovirus vectors (AxCAwt) overexpressing VP16-Six4wt or VP16-Six4W263R and cultured for 24h. Total RNA was extracted using Isogen reagent (Nippon Gene), treated with RNase-free DNase (Roche Diagnostics) and purified with RNeasy Midi Kit (QIAGEN). Poly A+ RNA was selected using Oligotex-dT30 latex beads (TaKaRa). Poly A+ RNA (20 µg) was reverse transcribed using an oligo(dT) primer in the presence of aminoallyl dUTP without the addition of spike-in controls. Then, single-stranded cDNAs were coupled with Cy3 (AxCAwt VP16-Six4wt infected sample) or Cy5 (AxCAwt VP16-Six4W263R infected sample) dyes, and the labeled probes were purified with QIAquick PCR Purification kit (QIAGEN). Hybridization to the microarray was carried out at 65°C for 17h according to the manufacturer's instruction. The arrays were washed, dried and scanned using ScanArray 5000 (GSI Lumonics) at two different PMT voltage settings (high and low) to avoid signal saturation. Cy3 and Cy5 intensities for each spot on the array were determined by QuantArray software (Version 3.0.0.0, GSI Lumonics). The raw data thus obtained was processed and the Cy3 to Cy5 ratios were calculated as follows: 1) subtraction of the fluorescence intensity of negative control spots as background from the intensity of each of the Cy3 and Cy5 spots, 2) normalization of the entire data set using the global normalization method, 3) elimination of spots with high background intensity for either dye, and 4) determination of the Cy3 to Cy5 ratios. Keywords: other
2005-07-20 | GSE2043 | GEO
Project description:Microarray Expression profiles from 58 samples comprising of 3 normals and 55 gastric cancers is used for molecular subclassification of Gastric Cancers. Data Generation and Processing: The ratiometric data here is given by Ch1(Cy3)/Ch2(Cy5) where Ch2 is Universal Reference RNA from Stratagene. Two different chips were used (13K and 18k); The ratio metric is given by (Biological sample / Universal Reference). The Biological Samples are labeled with Cy3 (Green) and the Universal Reference RNA is always labeled with Cy5 (Red). Two types of spots were excluded a) Spots for which Foreground intensity was lower from background by lesser than 10 fluoresence units. b) Spots that couldnt be identified reliably by the scanner (Arrayworx) software within the "region of interest" masked by the user. The 2 channels for each array are equalized by multiplying the reference channel Ch2(Cy5) by a constant which is derived by (Total Cy3 / Total Cy5). Subsequently, all expression ratios from each array is normalized to have median expression value = 1.
2010-06-09 | E-GEOD-2637 | biostudies-arrayexpress
Project description:Microarray Expression profiles from 58 samples comprising of 3 normals and 55 gastric cancers is used for molecular subclassification of Gastric Cancers. Data Generation and Processing: The ratiometric data here is given by Ch1(Cy3)/Ch2(Cy5) where Ch2 is Universal Reference RNA from Stratagene. Two different chips were used (13K and 18k); The ratio metric is given by (Biological sample / Universal Reference). The Biological Samples are labeled with Cy3 (Green) and the Universal Reference RNA is always labeled with Cy5 (Red). Two types of spots were excluded a) Spots for which Foreground intensity was lower from background by lesser than 10 fluoresence units. b) Spots that couldnt be identified reliably by the scanner (Arrayworx) software within the "region of interest" masked by the user. The 2 channels for each array are equalized by multiplying the reference channel Ch2(Cy5) by a constant which is derived by (Total Cy3 / Total Cy5). Subsequently, all expression ratios from each array is normalized to have median expression value = 1. Keywords: other
2005-07-25 | GSE2637 | GEO
Project description:Subconfluent AG01518 fibroblasts were starved for 16 hours in the presence of 0.1% BSA, and then stimulated for 1, 4, 10 or 24 hours with PDGF-BB (10 ng/ml in starvation medium), or left untreated for the same periods of time. Total RNA was isolated using the RNeasy kit (Qiagen). The RNA quality was checked by formaldehyde agarose gel electrophoresis (RNeasy protocol, Qiagen). Total RNA (40 mg) from cells treated for a given period of time with PDGF or starvation medium alone were labelled in reverse transcription reactions (Superscript II kit, Invitrogen) with dCTP-Cy5 and dCTP-Cy3, respectively (Amersham). In every second replicate experiment the fluorescent deoxynucleotides were swapped. Purified cDNA probes labelled with Cy3 and Cy5 were mixed per pair, and hybridized to cDNA microarray chips (hver1.2.1) from the Sanger Institute/LICR/CRUK Consortium (see http://www.sanger.ac.uk/Projects/Microarrays/ for details and hybridization protocols). For each time point, we performed at least four independent hybridizations, and used at least two different batches of RNA. Chips were scanned in a Perkin Elmer/GSI Lumonics ScanArray 4000 scanner and spot intensities were measured using the QuantArray software (histogram method with background subtraction). Normalization and statistical analysis of the quadruplicate data sets were performed using GeneSpring 5.0 analysis software (Silicon Genetics). A Lowess non-linear normalization was applied and the median of the ratio distribution for each array was set to 1. Regulated spots were selected based on the average ratio values above 1.750 for up-regulated genes and below 0.571 for down-regulated genes. In addition, we considered only genes that were significantly regulated (t-test, p<0.05) based on replicate hybridizations (global error model, GeneSpring). For all features selected using this protocol, the signal was significantly above the background, indicating that the expression of these genes was detectable. Finally, Hver1.2.1 microarrays contain replicate spots (1 to 6) corresponding to the same gene. Genes represented by spots that were not regulated in a similar manner were discarded. We show the average ratio of one representative spot for each regulated gene, with standard error calculated from multiple hybridizations and with the annotation provided by the microarray facility (Hver1.2.1_NCBI33).
2010-06-09 | E-GEOD-1484 | biostudies-arrayexpress
Project description:Rice is one of important crop and, the genome has been already completely sequenced. Moreover we collected more than 30K rice FL-cDNA clones as transcriptome resources. However, the cDNA collection did not reveal the transcription activity and specificity of expression. So, we designed 60-mer oligo array based on the array system of Agilent Technologies (GPL477) as custom array. For validation of the array, we tested the reproducibility of labeling and hybridization. After this validation, 22K rice oligo array was supplied from Agilent Technologies (GPL892). 1: reproducibility of labeling: mRNA of shoot sample was amplified and labeled more than 10 times with Cy3 and Cy5, and both Cy3- and Cy5-labeled cRNA was hybridized on a slide (self-hybridization), and validate the reproducibility of labeling. In addition, we also amplified and labeled mRNA of other samples with Cy3 and Cy5, and made a self-hybridization. The intensity data of these array was also indicated transcription activity of genes in these samples. Keywords: variety among tissues
2008-04-01 | GSE7530 | GEO
Project description:Nasopharyngeal carcinoma (NPC) remains a majoy health problem worldwide, specially in Southeast China. In order to find the new candidate genes and molecular markers that are associated with nasopharyngeal carcinoma (NPC), this study focused on the screening NPC relative genes by gene expression profile. Keywords: disease state analysis 23 NPC biopsies and 15 nasopharynx chronic phlogistic biopsies were used to screen NPC relative genes by BioStarH-141s (2004) profile gene chips which contained 14112 points of full length human genes. The tumor samples were labeled with Cy5-dUTP.The nasopharyngeal phlogistic tissues were labeled with Cy3-dUTP. Biostatistics and bioinformatics were also used to analyse the differently expressed genes.
2009-04-21 | E-GEOD-11219 | biostudies-arrayexpress
Project description:Examination of molecular basis of malaria resistance. Spleens from malaria resistant AcB55 and AcB61strains compared with A/J mice. Animals were sacrificed and spleens were rapidly frozen in liquid nitrogen, and subsequently stored at 80oC. Tissues were mechanically homogenized with a polytron and total cellular RNA was extracted using a commercially available reagent (TMTRIzol; Invitrogen). The poly-(A)+ fraction of the RNA was isolated by chromatography with oligo d(T) cellulose beads. For cDNA labeling, either 25 mg of total RNA or 2.5 mg of poly-(A) RNA was converted into cDNA using reverse transcriptase (RT; Super Script II, Invitrogen) and alternatively Cy5 or Cy3-labeled dCTP (1mM, Perkin Elmer-Cetus/NEN, Boston) in a reaction mixture containing 1.5 mL oligo (dT) (100pmol/ mL), 3 mL dNTP-dCTP (6.67mM each), 1 mL dCTP (2mM), 4 mL DTT (100mM), 8 mL 5 X RT Buffer (Invitrogen, California). The reactions were carried out at 42¼C for 3 hrs, after which the RNA was degraded by the addition of 0.5 mL RNase A (1 mg/mL) and 1.5 mL RNaseH 5 units/mL). Labeled cDNA was separated from unincorporated nucleotides (Qiagen column) and further concentrated by evaporation under vacuum. The arrays were pre-hybridized for 1-2hrs with DIGEasy hybridization buffer (Roche) containing 10ug/ml denatured salmon sperm DNA, and 10ug/ml yeast tRNA. The Cy5 and Cy3 labelled cDNAs were combined and hybridized in the same medium and incubated with the arrays for 16-18hrs at 37Co. Finally, the arrays were washed 3 x 10 mins in 0.1 x SSC (20 X SSC is 3M sodium chloride, 0.3 M sodium citrate, pH 7.0), 0.1%SDS at 50Co, and 4 x 3min in 0.1 x SSC at room temperature, and dried by centrifugation. Fluorescent array images were collected for both Cy3 and Cy5 with a ScanArray fluorescent scanner and image intensity data were extracted and analyzed with QuantArray 3.0 analysis software. Quantification data was imported in GeneSpring (Silicon Genetics). The import format was modified to maintain information relevant to user-contributed flagging as well as QC parameter furnished by the array manufacturer. Dye swap and Intensity-based normalization (Lowess) were performed using the default settings. Keywords: other
2003-10-06 | GSE709 | GEO
Project description:Array CGH of Mexican patient strains from Javier Torres laboratory analyzed by Carolina Romo. Patients have a range of pathologies form gastritis to ulcer to cancer. Multiple strains were isolated from each patient and all those giving distinct RAPD patterns were profiled against a reference sample of 26695/J99 genomic DNA. For each array 0.25-1 micrograms of genomic DNA of a test strains was labeled with Cy5 and 0.5 micrograms of an equimolar mix of 26695 and J99 genomic DNA was labeled with Cy3. A clinical history design type is where the organisms clinical history of diagnosis, treatments, e.g. vaccinations, surgery etc. Individual: Patient from whom the strain was isolated (#) Disease State: Disease of patient from whom the strain was isolated Replicate: strain isolate (within patient) (#) Keywords: clinical_history_design
2009-09-25 | GSE12932 | GEO