Expression profiling of archival tissues for long-term health studies
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
SUBMITTER: Levi Waldron
PROVIDER: E-GEOD-32651 | biostudies-arrayexpress |
REPOSITORIES: biostudies-arrayexpress
Similar Datasets
Project description:Over 20 million archival tissue samples are stored annually in the United States as formalin-fixed, paraffin-embedded (FFPE) tissue blocks, but only recently has whole-genome expression profiling from these samples become technically feasible. Here, we introduce novel general methods for assessing, summarizing, and visualizing expression data quality from archival samples. We validated these methods in technical study of 144 clinical breast cancer and autopsy samples and in an overview of all current publicly available FFPE whole-genome expression data. We additionally performed a case study incorporating over 1,000 colorectal cancer (CRC) samples collected from patients across the United States over a period of more than 25 years, integrating clinicopathological information, tumor molecular data, and archival tissue gene expression on an unparalleled scale. Both large-scale clinical studies presented a much greater range of data quality than previous smaller studies, emphasizing the need for rigorous quality control in translational applications of archival tissue gene expression profiling.
2012-10-02 | GSE32651 | GEO
Project description:BACKGROUND: Array Comparative Genomic Hybridization (aCGH) is a rapidly evolving technology that still lacks complete standardization. Yet, it is of great importance to obtain robust and reproducible data to enable meaningful multiple hybridization comparisons. Special difficulties arise when aCGH is performed on archival formalin-fixed, paraffin-embedded (FFPE) tissue due to its variable DNA quality. Recently, we have developed an effective DNA quality test that predicts suitability of archival samples for BAC aCGH. METHODS: In this report, we first used DNA from a cancer cell-line (SKBR3) to optimize the aCGH protocol for automated hybridization, and subsequently optimized and validated the procedure for FFPE breast cancer samples. We aimed for highest throughput, accuracy, and reproducibility applicable to FFPE samples, which can also be important in future diagnostic use. RESULTS: Our protocol of automated array-CGH on archival FFPE ULS-labeled DNA showed very similar results compared with published data and our previous manual hybridization method. CONCLUSION: This report combines automated aCGH on unamplified archival FFPE DNA using non-enzymatic ULS labeling, and describes an optimized protocol for this combination resulting in improved quality and reproducibility.
2007-02-23 | GSE7122 | GEO
Project description:Use of archival resources has been limited to date by inconsistent methods for genomic profiling of degraded RNA from formalin-fixed paraffin-embedded (FFPE) samples. RNA-seq offers a novel way to address this problem. In this study we evaluated transcriptomic dose responses using RNA-seq in paired FFPE and frozen (FROZ) samples from two archival studies in mice, one recent (<2 years old) and the other older (>20 years old). Experimental treatments included di(2-ethylhexyl)phthalate (DEHP) and dichloroacetic acid (DCA) for the <2 and >20 year-old studies, respectively. Total RNA was ribodepleted and sequenced using the Illumina HiSeq platform. In the recent study, FFPE samples showed high concordance in total reads (98% vs FROZ), fold-change values of differentially expressed genes (DEGs) (R2 = 0.99), highly enriched target pathways (90% overlap with FROZ), and benchmark dose estimates for preselected target genes (-2% overall vs FROZ). In contrast, RNA-seq data from older FFPE samples had lower total reads (70% vs FROZ) and poor concordance in global DEGs and pathways. Despite a 99% loss of counts, dose responses were still evident for target genes in FFPE samples and positively correlated with paired FROZ samples. These findings highlight potential variability in the quality of RNA-seq data from FFPE samples. More recent FFPE samples were highly similar to FROZ samples in sequencing quality metrics, DEG profiles, and dose-response parameters, while further methods development is needed for older or lower-quality FFPE samples. This work should help broaden the use of archival resources in both chemical safety and translational science.
2016-08-30 | GSE78962 | GEO
Project description:<p>Next Generation Sequencing (NGS) technologies are being used for detection of somatic mutations in tumors and studies of germline variation. However, most NGS studies used DNA isolated either from whole blood or fresh frozen tissue specimens. Meanwhile, the tissue specimens available from most National Cancer Institute (NCI) funded cohorts and the Surveillance, Epidemiology and End Results (SEER) registries (<a href="http://seer.cancer.gov/biospecimen">http://seer.cancer.gov/biospecimen</a>) are primarily formalin fixed paraffin embedded (FFPE). There are limited data, on a small number of FFPE tissue samples, which suggest NGS is feasible. Much less is known about the feasibility of these technologies for large scale studies or using older FFPE specimens (e.g. 5-30 years old).</p> <p>The SEER cancer registries cover approximately 28% of the United States population, providing high quality demographic, clinical, pathologic, and survival data. The SEER Residual Tissue Repository (RTR) program was established in 2003. The RTR maintains biospecimens obtained from three of SEER' population-based cancer registries: Iowa, Hawaii, and Los Angeles. Investigators at government, academic, and nonprofit institutions may apply to the program to obtain annotated FFPE tumor tissue specimens to study biomarkers, etiology, and other aspects with a population-based sample of cancer cases. </p> <p>The main objective of this project was to conduct a pilot study to determine whether the DNA obtained from archival FFPE tissue from 3 SEER Registries is of sufficient quality and quantity to conduct NGS. For Exome sequencing, sixty high-grade serous ovarian adenocarcinomas from FFPE tissues which were between 7 and 31 years old were obtained from three SEER registries. DNA was extracted, quantified, quality assessed, and subjected to whole exome sequencing. DNA extraction (yields and quality) and whole exome sequencing (depths of coverage and exome coverage obtained) results from this study will be presented. For RNA-sequencing, sixty-seven high-grade serous ovarian adenocarcinomas from FFPE tissues which were between 7 and 31 years old were obtained from three SEER registries. Total RNA was extracted, quantified, quality assessed, and subjected to whole transcriptome sequencing. Ultimately data derived from this analysis could serve as the basis for determining the utility of archival FFPE biospecimens for characterization and discovery projects utilizing NGS technologies instead of relying on frozen biospecimens. </p>
| phs000950 | dbGaP
Project description:BACKGROUND: Array Comparative Genomic Hybridization (aCGH) is a rapidly evolving technology that still lacks complete standardization. Yet, it is of great importance to obtain robust and reproducible data to enable meaningful multiple hybridization comparisons. Special difficulties arise when aCGH is performed on archival formalin-fixed, paraffin-embedded (FFPE) tissue due to its variable DNA quality. Recently, we have developed an effective DNA quality test that predicts suitability of archival samples for BAC aCGH. METHODS: In this report, we first used DNA from a cancer cell-line (SKBR3) to optimize the aCGH protocol for automated hybridization, and subsequently optimized and validated the procedure for FFPE breast cancer samples. We aimed for highest throughput, accuracy, and reproducibility applicable to FFPE samples, which can also be important in future diagnostic use. RESULTS: Our protocol of automated array-CGH on archival FFPE ULS-labeled DNA showed very similar results compared with published data and our previous manual hybridization method. CONCLUSION: This report combines automated aCGH on unamplified archival FFPE DNA using non-enzymatic ULS labeling, and describes an optimized protocol for this combination resulting in improved quality and reproducibility. In this study, we optimized the BAC araay-CGH protocol for automated hybridization for FFPE breast cancer samples. We have tested hybridization temperature and duration, different hybridization buffer conditions, and post-hybridization washing.
2010-06-12 | E-GEOD-7122 | biostudies-arrayexpress
Project description:Formalin-fixed, paraffin-embedded (FFPE) archival tissue is an important source of DNA material. The most commonly used technique to identify copy number aberrations from chromosomal DNA in tumorigenesis is array comparative genomic hybridization (aCGH). Although copy number analysis using DNA from FFPE archival tissue is challenging, several research groups have reported high quality and reproducible DNA copy number results using aCGH. Aim of the present study is to compare aCGH platforms suitable for copy number analysis using FFPE derived DNA. Two dual channel aCGH platforms (Agilent and NimbleGen) and a single channel SNP based platform (Affymetrix), were evaluated using seven FFPE colon cancer samples, median absolute deviation (MAD), deflection, signal-to-noise ratio (SNR) and DNA input requirements were used as quality criteria. Large differences were observed in MAD values and deflection between platforms; Agilent and NimbleGen showed better MAD values (0.13 for both) compared to Affymetrix (0.22). Contrary, Affymetrix showed a better deflection of 0.94, followed by 0.71 for Agilent and 0.51 for NimbleGen. Since the deflection compensates for the MAD the Signal to Noise Ratios (SNR) were comparable; Agilent ranks first, Affymetrix second and NimbleGen third with SNRs of 3.9, 3.6 and 3.3 respectively. DNA input amounts of 40ng are sufficient for high quality profiles with Affymetrix. For Agilent DNA input amounts of 50ng are sufficient for high quality profiles. For results of similar quality NimbleGen requires at least 100ng. Copy number analysis using DNA derived from FFPE archival material is feasible and shows reproducible results on high-resolution copy number platforms. Input amounts of DNA from FFPE material lower than recommended still yield high quality profiles without additional amplification steps.
2012-01-17 | GSE30121 | GEO
Project description:Formalin-fixed, paraffin-embedded (FFPE) archival tissue is an important source of DNA material. The most commonly used technique to identify copy number aberrations from chromosomal DNA in tumorigenesis is array comparative genomic hybridization (aCGH). Although copy number analysis using DNA from FFPE archival tissue is challenging, several research groups have reported high quality and reproducible DNA copy number results using aCGH. Aim of the present study is to compare aCGH platforms suitable for copy number analysis using FFPE derived DNA. Two dual channel aCGH platforms (Agilent and NimbleGen) and a single channel SNP based platform (Affymetrix), were evaluated using seven FFPE colon cancer samples, median absolute deviation (MAD), deflection, signal-to-noise ratio (SNR) and DNA input requirements were used as quality criteria. Large differences were observed in MAD values and deflection between platforms; Agilent and NimbleGen showed better MAD values (0.13 for both) compared to Affymetrix (0.22). Contrary, Affymetrix showed a better deflection of 0.94, followed by 0.71 for Agilent and 0.51 for NimbleGen. Since the deflection compensates for the MAD the Signal to Noise Ratios (SNR) were comparable; Agilent ranks first, Affymetrix second and NimbleGen third with SNRs of 3.9, 3.6 and 3.3 respectively. DNA input amounts of 40ng are sufficient for high quality profiles with Affymetrix. For Agilent DNA input amounts of 50ng are sufficient for high quality profiles. For results of similar quality NimbleGen requires at least 100ng. Copy number analysis using DNA derived from FFPE archival material is feasible and shows reproducible results on high-resolution copy number platforms. Input amounts of DNA from FFPE material lower than recommended still yield high quality profiles without additional amplification steps.
2012-01-17 | GSE30120 | GEO
Project description:Formalin-fixed, paraffin-embedded (FFPE) archival tissue is an important source of DNA material. The most commonly used technique to identify copy number aberrations from chromosomal DNA in tumorigenesis is array comparative genomic hybridization (aCGH). Although copy number analysis using DNA from FFPE archival tissue is challenging, several research groups have reported high quality and reproducible DNA copy number results using aCGH. Aim of the present study is to compare aCGH platforms suitable for copy number analysis using FFPE derived DNA. Two dual channel aCGH platforms (Agilent and NimbleGen) and a single channel SNP based platform (Affymetrix), were evaluated using seven FFPE colon cancer samples, median absolute deviation (MAD), deflection, signal-to-noise ratio (SNR) and DNA input requirements were used as quality criteria. Large differences were observed in MAD values and deflection between platforms; Agilent and NimbleGen showed better MAD values (0.13 for both) compared to Affymetrix (0.22). Contrary, Affymetrix showed a better deflection of 0.94, followed by 0.71 for Agilent and 0.51 for NimbleGen. Since the deflection compensates for the MAD the Signal to Noise Ratios (SNR) were comparable; Agilent ranks first, Affymetrix second and NimbleGen third with SNRs of 3.9, 3.6 and 3.3 respectively. DNA input amounts of 40ng are sufficient for high quality profiles with Affymetrix. For Agilent DNA input amounts of 50ng are sufficient for high quality profiles. For results of similar quality NimbleGen requires at least 100ng. Copy number analysis using DNA derived from FFPE archival material is feasible and shows reproducible results on high-resolution copy number platforms. Input amounts of DNA from FFPE material lower than recommended still yield high quality profiles without additional amplification steps. Overall study comprises 6 samples analyzed across three platforms with an additional dilution range (5 concentrations) of a seventh sample on two platforms. This Series represents NimbleGen platform-derived data.
2012-01-17 | E-GEOD-30120 | biostudies-arrayexpress
Project description:Formalin-fixed, paraffin-embedded (FFPE) archival tissue is an important source of DNA material. The most commonly used technique to identify copy number aberrations from chromosomal DNA in tumorigenesis is array comparative genomic hybridization (aCGH). Although copy number analysis using DNA from FFPE archival tissue is challenging, several research groups have reported high quality and reproducible DNA copy number results using aCGH. Aim of the present study is to compare aCGH platforms suitable for copy number analysis using FFPE derived DNA. Two dual channel aCGH platforms (Agilent and NimbleGen) and a single channel SNP based platform (Affymetrix), were evaluated using seven FFPE colon cancer samples, median absolute deviation (MAD), deflection, signal-to-noise ratio (SNR) and DNA input requirements were used as quality criteria. Large differences were observed in MAD values and deflection between platforms; Agilent and NimbleGen showed better MAD values (0.13 for both) compared to Affymetrix (0.22). Contrary, Affymetrix showed a better deflection of 0.94, followed by 0.71 for Agilent and 0.51 for NimbleGen. Since the deflection compensates for the MAD the Signal to Noise Ratios (SNR) were comparable; Agilent ranks first, Affymetrix second and NimbleGen third with SNRs of 3.9, 3.6 and 3.3 respectively. DNA input amounts of 40ng are sufficient for high quality profiles with Affymetrix. For Agilent DNA input amounts of 50ng are sufficient for high quality profiles. For results of similar quality NimbleGen requires at least 100ng. Copy number analysis using DNA derived from FFPE archival material is feasible and shows reproducible results on high-resolution copy number platforms. Input amounts of DNA from FFPE material lower than recommended still yield high quality profiles without additional amplification steps. Overall study comprises 6 samples analyzed across three platforms with an additional dilution range (5 concentrations) of a seventh sample on two platforms. This Series represents Agilent platform-derived data.
2012-01-17 | E-GEOD-30121 | biostudies-arrayexpress
Project description:Formalin-fixed paraffin-embedded (FFPE) samples are the only remaining biological archive for many toxicological and clinical studies, yet their use in genomics has been limited due to variability in RNA quality from formalin fixation. Older FFPE samples, which often have highly degraded RNA, pose a particularly difficult technical challenge. Recent developments in probe-based targeted sequencing technologies show promise in addressing this issue, while also being more cost effective than traditional RNA-sequencing (RNA-seq) methods. In the current study, we evaluated dose-dependent transcriptional changes from paired frozen and archival FFPE liver samples stored for over 20 years using targeted resequencing (TempO-Seq) and whole-genome RNA-seq methods. Samples were originally collected from male mice exposed to a reference chemical (dichloroacetic acid, DCA) at 0, 198, 313 and 427 mg/kg-day, (n=6/dose) by drinking water for 6 days. TempO-Seq showed high overlap in differentially expressed genes (DEGs) between matched FFPE and flash-frozen (FROZ) samples and concordance in fold-changes across the highest two dose levels of DCA vs. control (R2 ≥ 0.94). Similarly, high concordance in fold-changes was observed between TempO-Seq FFPE and RNA-seq FROZ results (R2 ≥ 0.92). Only 28 DEGs or fewer were identified in RNA-seq FFPE samples. Modeling of DCA-dependent changes in gene sets identified benchmark doses from TempO-Seq FROZ and FFPE samples that were within 1.4-fold of RNA-seq FROZ samples (93.9 mg/kg-d), whereas RNA-seq FFPE samples were 3.3-fold higher (310.3 mg/kg-d). This work demonstrates that targeted sequencing may provide a more robust method for quantifying gene expression profiles from aged archival FFPE samples.
2022-10-10 | GSE186113 | GEO