Time course analysis of gene expression during hypoxia in S. cerevisiae using RNA-Seq
Ontology highlight
ABSTRACT:
ORGANISM(S): Saccharomyces cerevisiae
SUBMITTER: Mark Hickman
PROVIDER: E-GEOD-85595 | biostudies-arrayexpress |
REPOSITORIES: biostudies-arrayexpress
Similar Datasets
Project description:We used RNA-seq to monitor mRNA levels of all genes in response to hypoxia of wild-type yeast, S. cerevisiae (strain yMH914 with wildtype HAP1). To gain insights into how gene expression changes over time, cells were subjected to 100% nitrogen gas and collected after 0,5,10,30,60,120,180, and 240 minutes. Total RNA was extracted and mRNAs were enriched by polyA selection. The cDNA was prepared into a sequencing library, multiplexed and single-end sequenced by an Illumina HiSeq 2500 sequencer. After mapping with Tophat2, the number of reads per feature was calculated using HTSeq.
2016-08-16 | GSE85595 | GEO
Project description:We used RNA-seq to monitor mRNA levels of all genes in response to hypoxia in several mutant strains of the yeast, S. cerevisiae (S288C background with wildtype HAP1). To gain insights into how gene expression changes over time, cells were subjected to 100% nitrogen gas and collected after 0,5,10,30,60,120,180, and 240 minutes. Total RNA was extracted and mRNAs were enriched by polyA selection. The cDNA was prepared into a sequencing library, multiplexed and single-end sequenced by an Illumina HiSeq 2500 sequencer. After mapping with Tophat2, the number of reads per feature was calculated using HTSeq.
2018-06-01 | GSE115171 | GEO
Project description:RNA-Seq analysis of mouse cardiac transcriptome. RNA was isolated from the ventricles of 12-weeks-old male mice. Sequencing libraries were prepared using TrueSeq Stranded RNA LT Kit Ribo-Zero Gold (Illumina, 15032619). Libraries were pair-end sequenced on a MiSeq sequencer (Illumina) and mapped to the Mus musculus reference genome GRCm38 (https://support.illumina.com/sequencing/sequencing_software/igenome.html) using TopHat2 (Kim et al., 2013). Differential gene-expression analysis between controls and the EphB4 flox mice was performed using DESeq2 (Love et al., 2014). Read counts were obtained with HTSeq (Anders et al., 2015). Genes were considered as differentially expressed when the FDR-adjusted p-value was Ôëñ0.05.
2020-01-15 | E-MTAB-7686 | biostudies-arrayexpress
Project description:Gene expression changes were compared in proliferating and senescent human IMR90 cells, with or without TSA treatment. Method: RNA was extracted, in triplicate, then sequenced with an Illumina NextSeq 500 sequencer. Sequence reads passing the quality control filters were aligned using Tophat2 and then analysed with Cufflinks.
2020-06-30 | GSE132370 | GEO
Project description:Yeast cell growth and treatment:; Yeast strains used were L51 (MATa, ura3-52, leu2-3, 112, his4-519, ade1-100, trp1::HisG, hap1::LEU2) and MHY100 (MATa, ura3-52, leu2-3, 112, his4-519, ade1-100, hem1-delta100). L51 was used for studies of oxygen regulation, and MHY100 was used for studies of heme regulation. To avoid variations from the differences accumulated after many generations of growth of strains, we transformed the L51 strain with the HAP1 gene deleted for studies of Hap1 function. Hap1 protein was expressed in L51 cells by transforming an ARS-CEN plasmid bearing the complete HAP1 genomic sequence. For comparison with cells without Hap1 expressed, an empty vector was transformed into L51 cells. The use of Hap1 expression plasmid generated much more reproducible results than the use of different strains. Yeast cells with or without Hap1 expressed grew at similar rates under both anaerobic and aerobic conditions. We chose to use a low oxygen level (~10 ppb) in this study, in order to identify all oxygen-regulated genes. Previous studies have shown that most, if not all, oxygen-regulated genes are affected a low concentrations, but some genes are not affected at higher oxygen levels (for example, > 1 ppm). Anaerobic (~10 ppb O2, measured by using an oxygen monitor and confirmed by CHEMetrics oxygen kits) growth condition was created by using an anaerobic chamber (Coy Laboratory, Inc.) and by filling the chamber with a mixture of 5% H2 and 95% N2 in the presence of palladium catalyst [61]. L51 cells bearing the Hap1 expression or empty vector were grown under normoxic or anaerobic conditions for 1.5 or 6 hours. The UAS1/CYC1-lacZ reporter plasmid was transformed into yeast cells to confirm the expression of Hap1 and the oxygen levels. Cells were grown in yeast synthetic complete media. Co2+-induced cells were grown in the presence of 400 microM cobalt chloride for 6 hours, as described previously. MHY100 cells were grown in medium containing 2.5 microg/ml (heme-deficient) or 250 microg/ml (heme-sufficient) 5-aminolevulinic acid. For RNA preparations, yeast cells were inoculated so that the optical density of yeast cells was in the range of 0.8-1.0 immediately before the collection of cells. RNA preparation and microarray gene expression profiling:; RNA was extracted from yeast cells exactly as previously described. RNA samples were prepared from 8 different experimental conditions: (1) L51 yeast cells bearing the Hap1 expression plasmid maintained under aerobic conditions, (2) L51 yeast cells bearing the empty expression plasmid maintained under aerobic conditions, (3) L51 yeast cells bearing the Hap1 expression plasmid maintained under anaerobic conditions for 1.5 hours, (4) L51 yeast cells bearing the Hap1 expression plasmid maintained under anaerobic conditions for 6 hours, (5) L51 yeast cells bearing the empty expression plasmid maintained under anaerobic conditions for 6 hours, (6) L51 yeast cells bearing the empty expression plasmid in the presence of 400 microM cobalt chloride for 6 hours, (7) MHY100 cells grown in medium containing 250 microg/ml (heme-sufficient) 5-aminolevulinic acid, and (8) MHY100 cells grown in medium containing 2.5 microg/ml (heme-deficient) 5-aminolevulinic acid. For each condition, three replicates were generated by preparing RNA samples from three batches of independently grown cells. Microarray expression analyses were performed by using three batches of replicate RNA samples. The quality of RNA was high as assessed by measuring absorbance at 260 and 280 nm, by gel electrophoresis, and by the quality of microarray data (see below). The synthesis of cDNA and biotin-labeled cRNA were carried out exactly as described in the Affymetrix GeneChip Expression Analysis Technical Manual (2000). The yeast Saccharomyces cerevisiae genome 2.0 arrays were purchased from Affymetrix, Inc. Probe hybridization and data collection were carried out by the Columbia University Affymetrix GeneChip processing center. Specifically, the Affymetrix GeneChip Hybridization Oven 640 and the next generation GeneChip Fluidics Station 450 were used for hybridization and chip processing. Chip scanning was performed by using the GeneChip scanner 3000. Initial data acquisition, analysis was performed by using the Affymetrix Microarray suite. By using GCOS1.2 with the advanced PLIER (probe logarithmic intensity error) algorithm, we calculated and examined the parameters reflecting the image quality of the arrays. Arrays with a high background level in any region were discarded and replaced. The average noise or background level was limited to less than 5%. The average intensity for those genes judged to be present was at least 10-fold higher than those judged to be absent. Also, arrays that deviated considerably in the percentage of present and absent genes from the majority of the arrays were replaced. Arrays with a ï¢-actin 3â/5â ratio greater than 2 were replaced. Normalization of microarray data:; For each microarray, we converted the .DAT image files into .CEL files using the Affymetrix GCOS software. These raw .CEL files were further processed into expression values using the RMA express software by Bolstad. This software uses the robust multiarray average method by Irrizary et al., which involves a background correction and a quantile-based normalization scheme. Experiment Overall Design: Yeast cell growth and treatment: Experiment Overall Design: Yeast strains used were L51 (MATa, ura3-52, leu2-3, 112, his4-519, ade1-100, trp1::HisG, hap1::LEU2) and MHY100 (MATa, ura3-52, leu2-3, 112, his4-519, ade1-100, hem1-delta100). L51 was used for studies of oxygen regulation, and MHY100 was used for studies of heme regulation. To avoid variations from the differences accumulated after many generations of growth of strains, we transformed the L51 strain with the HAP1 gene deleted for studies of Hap1 function. Hap1 protein was expressed in L51 cells by transforming an ARS-CEN plasmid bearing the complete HAP1 genomic sequence. For comparison with cells without Hap1 expressed, an empty vector was transformed into L51 cells. The use of Hap1 expression plasmid generated much more reproducible results than the use of different strains. Yeast cells with or without Hap1 expressed grew at similar rates under both anaerobic and aerobic conditions. Experiment Overall Design: We chose to use a low oxygen level (~10 ppb) in this study, in order to identify all oxygen-regulated genes. Previous studies have shown that most, if not all, oxygen-regulated genes are affected a low concentrations, but some genes are not affected at higher oxygen levels (for example, > 1 ppm). Anaerobic (~10 ppb O2, measured by using an oxygen monitor and confirmed by CHEMetrics oxygen kits) growth condition was created by using an anaerobic chamber (Coy Laboratory, Inc.) and by filling the chamber with a mixture of 5% H2 and 95% N2 in the presence of palladium catalyst [61]. L51 cells bearing the Hap1 expression or empty vector were grown under normoxic or anaerobic conditions for 1.5 or 6 hours. The UAS1/CYC1-lacZ reporter plasmid was transformed into yeast cells to confirm the expression of Hap1 and the oxygen levels. Cells were grown in yeast synthetic complete media. Co2+-induced cells were grown in the presence of 400 microM cobalt chloride for 6 hours, as described previously. MHY100 cells were grown in medium containing 2.5 microg/ml (heme-deficient) or 250 microg/ml (heme-sufficient) 5-aminolevulinic acid. For RNA preparations, yeast cells were inoculated so that the optical density of yeast cells was in the range of 0.8-1.0 immediately before the collection of cells. Experiment Overall Design: RNA preparation and microarray gene expression profiling: Experiment Overall Design: RNA was extracted from yeast cells exactly as previously described. RNA samples were prepared from 8 different experimental conditions: (1) L51 yeast cells bearing the Hap1 expression plasmid maintained under aerobic conditions, (2) L51 yeast cells bearing the empty expression plasmid maintained under aerobic conditions, (3) L51 yeast cells bearing the Hap1 expression plasmid maintained under anaerobic conditions for 1.5 hours, (4) L51 yeast cells bearing the Hap1 expression plasmid maintained under anaerobic conditions for 6 hours, (5) L51 yeast cells bearing the empty expression plasmid maintained under anaerobic conditions for 6 hours, (6) L51 yeast cells bearing the Hap1 expression plasmid in the presence of 400 microM cobalt chloride for 6 hours, (7) MHY100 cells grown in medium containing 250 microg/ml (heme-sufficient) 5-aminolevulinic acid, and (8) MHY100 cells grown in medium containing 2.5 microg/ml (heme-deficient) 5-aminolevulinic acid. For each condition, three replicates were generated by preparing RNA samples from three batches of independently grown cells. Microarray expression analyses were performed by using three batches of replicate RNA samples. The quality of RNA was high as assessed by measuring absorbance at 260 and 280 nm, by gel electrophoresis, and by the quality of microarray data (see below). Experiment Overall Design: The synthesis of cDNA and biotin-labeled cRNA were carried out exactly as described in the Affymetrix GeneChip Expression Analysis Technical Manual (2000). The yeast Saccharomyces cerevisiae genome 2.0 arrays were purchased from Affymetrix, Inc. Probe hybridization and data collection were carried out by the Columbia University Affymetrix GeneChip processing center. Specifically, the Affymetrix GeneChip Hybridization Oven 640 and the next generation GeneChip Fluidics Station 450 were used for hybridization and chip processing. Chip scanning was performed by using the GeneChip scanner 3000. Initial data acquisition, analysis was performed by using the Affymetrix Microarray suite. By using GCOS1.2 with the advanced PLIER (probe logarithmic intensity error) algorithm, we calculated and examined the parameters reflecting the image quality of the arrays. Arrays with a high background level in any region were discarded and replaced. The average noise or background level was limited to less than 5%. The average intensity for those genes judged to be present was at least 10-fold higher than those judged to be absent. Also, arrays that deviated considerably in the percentage of present and absent genes from the majority of the arrays were replaced. Arrays with a ï¢-actin 3â/5â ratio greater than 2 were replaced. Experiment Overall Design: Normalization of microarray data: Experiment Overall Design: For each microarray, we converted the .DAT image files into .CEL files using the Affymetrix GCOS software. These raw .CEL files were further processed into expression values using the RMA express software by Bolstad. This software uses the robust multiarray average method by Irrizary et al., which involves a background correction and a quantile-based normalization scheme.
2008-10-25 | E-GEOD-8343 | biostudies-arrayexpress
Project description:Gene expression changes were compared in proliferating and senescent human IMR90 cells, with either empty vector, Parkin, or Parkin+CCCP. Method: RNA was extracted, in triplicate, then sequenced with an Illumina NextSeq 500 sequencer. Sequence reads passing the quality control filters were aligned using Tophat2 and then analysed with Cufflinks.
2020-06-30 | GSE132369 | GEO
Project description:Untreated mice or mice treated with paracetamol, in the presence or absence of TSA, were culled after 14 hrs or 24 hrs of treatment, and RNAseq was performed. Method: RNA was extracted, in triplicate, then sequenced with an Illumina NextSeq 500 sequencer. Sequence reads passing the quality control filters were aligned using Tophat2 and then analysed with Cufflinks.
2020-06-30 | GSE132368 | GEO
Project description:Small RNAs (<100 bases in length) were purified from total RNA samples using the miRNeasy kit (Qiagen), and multiplexed miRNA libraries were prepared using a previously described protocol and sequenced on a HiSeq 2000 (Illumina). Image analysis, base calling, demultiplexing and conversion of BCL to FASTQ format were carried out using CASAVA 1.8.2 software (Illumina). Adaptor sequences were removed using mirExpress software. Fastq were 3p-adaptor trimmed. The sequences were then aligned on hg19 (GRCh37) human reference genome with STAR (v.2.5.2a), allowing no mismatch with reference. Reads were counted using HTSeq-count (HTSeq v 0.6.1p1 Python package) using “intersection-strict” mode, to count mature miRNA abundance according to miRbase v.20.
2020-08-12 | E-MTAB-6553 | biostudies-arrayexpress
Project description:Arabidopsis thaliana (Col-0) seedlings were grown on vertically oriented agar plates and subjected to hypoxia (0.2% oxygen, 99.8% nitrogen) for 30 to 240 minutes.
2014-08-07 | GSE60133 | GEO
Project description:Arabidopsis thaliana (Col-0) seedlings were grown on vertically oriented agar plates and subjected to hypoxia (0.2% oxygen, 99.8% nitrogen) for 30 to 240 minutes. Five independent samples were analysed: three samples were subjected to hypoxia treatment and two samples were kept at ambient conditions;
2014-08-07 | E-GEOD-60133 | biostudies-arrayexpress