Novel Reactive Distillation Process for Cyclohexyl Acetate Production: Design, Optimization, and Control
Ontology highlight
ABSTRACT:
SUBMITTER: Hu Y
PROVIDER: S-EPMC10099445 | biostudies-literature | 2023 Mar
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Background: Ethyl lactate is an environmentally benign solvent, which could substitute petrol-based volatile organic compounds (VOCs) in many applications if production costs are reduced. It is usually produced by the esterification of lactic acid with ethanol - two important chemical building blocks of biorefineries that are available at industrial scale. Reactive distillation is a promising alternative production process, which utilises process intensification to increase energy efficiency and space-time yield by enhancing the reaction kinetics. Methods: In this work, process intensification of ethyl lactate production by means of distillation was analysed with special focus on the efficient separation of water. Different setups were evaluated. The feedstock requirements were studied and the process was optimized regarding reaction kinetics in experiments on laboratory level. The preparation of anhydrous starting mixtures for ethyl lactate formation was tested in batch experiments and applied to reactive distillation. The simultaneous distillation was optimized and assessed for its energy efficiency. For this purpose, integrated reactive distillation was compared to a simple setup for distillation enhanced esterification. Results: It was found that an optimized serial setup of reactors and distillation steps can offer similar process intensification at a lower distillate rate compared to simultaneous reactive distillation and is therefore more energy efficient. Moreover, the serial setup is more flexible and straight-forward to regulate and scale-up. Conclusions: Based on the experimental results, the optimal setup and parameters of a continuous process for ethyl lactate production by distillation enhanced esterification was presented.
| S-EPMC10445869 | biostudies-literature
Project description:The design of separation systems for the purification of azeotropic mixtures is of great importance in the chemical industries from economic and environmental points of view. Two novel reactive-extractive distillation (RED) processes, new design (I) and new design (II), were proposed for separating the azeotropic mixture of water/methanol/tetrahydrofuran (THF). These processes were compared to a conventional extractive distillation (ED) process. New design (I) employs dimethyl sulfoxide as a solvent, while new design (II) utilizes ethylene glycol. Ethylene oxide was introduced to the first column in both designs, enabling the in-situ production of ethylene glycol, a valuable byproduct. This is a novel solution to separate water from the azeotropic mixture by reaction between ethylene oxide and water. Aspen Plus software was used to simulate and design the processes. Both suggested designs were compared economically with the base design which is an ED process. According to the results, the new design (I) is more cost-effective and environmentally friendly alternative to the base design and the new design (II). It has a lower total capital cost and produces less carbon dioxide. Additionally, it generates a valuable by-product, ethylene glycol, which can be sold for substantial revenue. As a result, the new design (I) is the preferred choice for replacing the conventional extractive distillation method.
| S-EPMC10803736 | biostudies-literature
Project description:Trichlorosilane (TCS) is a crucial intermediate product in the polysilicon manufacturing process, and its purification consumes a significant amount of energy. The design and control of the TCS heat integration pressure-swing distillation (HIPSD) process was investigated using Aspen Plus V8.4 and Aspen dynamics in this study. Three partial processes and one full HIPSD process were investigated by adjusting the operating conditions and rationally configuring the material flow. Compared with the conventional distillation process, the partial and full HIPSD can reduce total annual cost by 15.75 and 27.39%, respectively. The aforementioned process was controlled robustly by adding the ratio of reboiler heat duty to feed (Q R/F) feedforward control structure and the ratio of recycle to feed (F REC/F) control structure. In addition, the performance of the control structure was evaluated by introducing ±10% disturbances of the feed flowrate and composition. To compare the performance of the control structure, the integral squared error value is combined with the dynamic response curve. The full HIPSD scheme can resist ±10% disturbances of flow and composition with the best economic performance. This study has certain reference significance for the distillation process and control strategy design of TCS in the polysilicon manufacturing process.
| S-EPMC8945141 | biostudies-literature
Project description:As greenhouse gases such as CO2 continue to
| S-EPMC10433492 | biostudies-literature
Project description:Muconic acid production from engineered Corynebacterium glutamicum. Gene expression analysis in the pathway redesigned Corynebacterium glutamicum
2018-11-30 | E-MTAB-7350 | biostudies-arrayexpress
Project description:The glycerol oxidation reaction was developed leading to selective catalysts and optimum conditions for the production of carboxylic acids such as glycolic acid. However, carboxylic acids are produced in highly diluted mixtures, challenging the recovery and purification, and resulting in high production costs, polymerization, and thermal degradation of some of the products. The protection of the acid function by esterification reaction is one of the most promising alternatives through reactive distillation (RD); this technique allows simultaneously the recovery of carboxylic acids and the elimination of most part of the water. The reactive distillation, experimental and simulation, of glycolic acid was performed, based on kinetic and thermodynamic models developed. For the thermodynamic model, binary parameters of the missing couples were determined experimentally, and the non-random two-liquid (NRTL) model was selected as the most suitable to represent the binary behavior. The kinetic study of the esterification in the presence of homogeneous and heterogeneous catalysis concluded that the heterogeneous reaction can be accurately described either by a pseudo-homogeneous model or the Langmuir-Hinshelwood (L-H) adsorption model. Reactive distillation was conducted in a distillation column filled with random packing sulfonated ion-exchange resin, Nafion NR50®, or with extruded TiO2-Wox. The conversion rate of glycolic acid in reactive distillation increases from 14% without catalyst to 30% and 36% using Nafion NR50® and TiO2-Wox, respectively. As opposed to the batch reactor study, the conversion rate of glycolic acid was better with TiO2-Wox than with sulfonated ion-exchange resin. The better performance was related to an increase in the hydrodynamics inside the column. Tests using water in the feed confirm the hypothesis by increasing the conversion rate because of the decrease in the mass transfer resistance by reducing the average diffusion coefficient. The simulation of the reactive distillation column with ProSim® Plus showed that the yield of the ester increased operating at a low feed rate with reactive stripping. In the presence of water in the feed, nonreactive stages are required, including an enrichment region to separate water vapor.
| S-EPMC9240659 | biostudies-literature
Project description:Developing high-performance solvents for extraction and optimizing process technologies is crucial for efficient extractive distillation (ED) separation of azeotrope mixtures. In this paper, computer-aided screening was used to study the ED of azeotrope mixtures in ethyl acetate and ethanol systems using organic solvent dimethyl sulfoxide (DMSO) and ionic liquid (IL) ([EMIM][Ac]). The structural relationship between the ILs and the azeotrope mixture was analyzed by σ-profile, molecular surface electrostatic potential, interaction energy, and separation gradient. Subsequently, process simulation was carried out using Aspen Plus software and global optimization was performed with genetic algorithm, which found that both traditional organic solvents and ILs have good separation effects. But considering the high volatility of organic solvents and low saturation vapor pressure of ILs, it is considered to combine them to further explore the cost and carbon emission advantages in extractive distillation separation. Compared with pure organic solvent and pure ILs separation processes, the TAC of the process using an IL-based mixed solvent process decreased by 5.11 and 21.98%, respectively. The carbon emissions of the mixed extractant process were slightly higher than those of the pure organic solvent process, but the addition of ILs made very little volatilization of organic solvents, saving a charge for extractant use. By improving the process, waste heat is effectively recovered, which can save most of the utility engineering costs, and compared with the previous process, the total alkali consumption and carbon dioxide emissions are reduced by 9.43 and 27.17%, respectively. This exploration provides a theoretical reference for the development application and industrial research of ED processes using IL-based mixed solvents.
| S-EPMC11191117 | biostudies-literature
Project description:Endoplasmic reticulum aminopeptidase 1 (ERAP1) cleaves the N-terminal amino acids of peptides, which can then bind onto major histocompatibility class I (MHC-I) molecules for presentation onto the cell surface, driving the activation of adaptive immune responses. In cancer, overtrimming of mature antigenic peptides can reduce cytotoxic T-cell responses, and ERAP1 can generate self-antigenic peptides which contribute to autoimmune cellular responses. Therefore, modulation of ERAP1 activity has potential therapeutic indications for cancer immunotherapy and in autoimmune disease. Herein we describe the hit-to-lead optimization of a series of cyclohexyl acid ERAP1 inhibitors, found by X-ray crystallography to bind at an allosteric regulatory site. Structure-based drug design enabled a >1,000-fold increase in ERAP1 enzymatic and cellular activity, resulting in potent and selective tool molecules. For lead compound 7, rat pharmacokinetic properties showed moderate unbound clearance and oral bioavailability, thus highlighting the promise of the series for further optimization.
| S-EPMC11647717 | biostudies-literature
Project description:Reducing production costs is one of the main objectives of process intensification; in this work, production costs of the distillation process are reduced by reducing equipment size and utility consumption from the perspective of process optimization to achieve the purpose of process intensification. The application of intelligent optimization algorithms in the optimization process of distillation is vital to achieving high efficiency and low costs. Combining the harmony search algorithm with the characteristics of distillation optimization, a new distillation harmony search algorithm (DHSA) was proposed, which includes the self-adaptive adjustment of parameters, roulette selection strategy, and ratio optimization strategy. Benefiting from the DHSA, the optimal total annual cost and calculation times were remarkably reduced when compared with reported algorithms in the optimization of four distillation cases including the two-column model, three-column model, reactive distillation column model, and dividing-wall extractive distillation column model. In addition, the highest coefficient of variation of DHSA in 10 parallel calculations is 1.25%. These results indicate that DHSA has the advantages of a higher-quality solution, less computing time, and higher stability, which not only improves the optimization efficiency and quality but also inspires the optimization strategies for other algorithms.
| S-EPMC10413369 | biostudies-literature
Project description:Design of the biodiesel production from palm fatty acid distillate (PFAD) using process intensification approach is studied in technical, economic and environmental view points. Firstly, the transport phenomena analysis is performed to select the suitable intensified unit. The reactive distillation is selected and used in esterification - transesterification process and hydrolysis - esterification process. The optimum condition of reactive distillation in esterification - transesterification is achieved when the methanol is fed at the 3rd stage of the 4-stage column and the liquid holdup is maintained at 6 m3. The intensified esterification - transesterification process offers higher biodiesel yield and consumes less energy compared with the intensified hydrolysis - esterification process. The economic analysis shows that the intensified esterification-transesterification process is found to be economically feasible. Finally, environment assessment based on life cycle analysis (LCA) indicates that the environmental impact of both processes are similar.
| S-EPMC8111092 | biostudies-literature