Dataset Information

Effect of polyester-based artificial tendons on movement biomechanics: A preliminary in vivo study.

ABSTRACT: Artificial tendons may be valuable clinical devices for replacing damaged or missing biological tendons. In this preliminary study, we quantified the effect of polyester-suture-based artificial tendons on movement biomechanics. New Zealand White rabbits underwent surgical replacement of either the Achilles (n = 2) or tibialis cranialis (TC, n = 2) biological tendons with artificial tendons. Once pre-surgery and weekly from 2 to 6 weeks post-surgery, we quantified hindlimb kinematics and ground contact pressures during the stance phase of hopping gait. Post-surgical movement biomechanics were either consistent or improved over time in both groups. However, the Achilles group had greater overall biomechanical and muscle deficits than the TC group. In the TC group, at 6 weeks post-surgery, foot angles were about 10° greater than those in healthy controls during the first 30 % of stance. At 6 weeks post-surgery, the Achilles group exhibited lesser (i.e., more dorsiflexed) ankle angles (minimum angle = 31.5 ± 9.4°) and vertical ground reaction forces (37.4 ± 2.6 %BW) during stance than those in healthy controls (65.0 ± 11.2° and 50.2 ± 8.3 %BW, respectively). Future studies are needed to quantify long-term biomechanical function with artificial tendons, the effect of artificial tendons on muscle function and structure, and the effect of formal rehabilitation.

SUBMITTER: Hall PT

PROVIDER: S-EPMC10150316 | biostudies-literature | 2023 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Effect of polyester-based artificial tendons on movement biomechanics: A preliminary in vivo study.

Hall Patrick T PT Stubbs Caleb C Pedersen Alisha P AP Billings Caroline C Stephenson Stacy M SM Greenacre Cheryl B CB Anderson David E DE Crouch Dustin L DL

Journal of biomechanics 20230306

Artificial tendons may be valuable clinical devices for replacing damaged or missing biological tendons. In this preliminary study, we quantified the effect of polyester-suture-based artificial tendons on movement biomechanics. New Zealand White rabbits underwent surgical replacement of either the Achilles (n = 2) or tibialis cranialis (TC, n = 2) biological tendons with artificial tendons. Once pre-surgery and weekly from 2 to 6 weeks post-surgery, we quantified hindlimb kinematics and ground c ...[more]

PMID: 36944293

Similar Datasets

Project description:Horse racing is a multi-billion-dollar industry that has raised welfare concerns due to injured and euthanized animals. Whilst the cause of musculoskeletal injuries that lead to horse morbidity and mortality is multifactorial, pre-existing pathologies, increased speeds and substrate of the racecourse are likely contributors to foot disease. Horse hooves have the ability to naturally deform during locomotion and dissipate locomotor stresses, yet farriery approaches are utilised to increase performance and protect hooves from wear. Previous studies have assessed the effect of different shoe designs on locomotor performance; however, no biomechanical study has hitherto measured the effect of horseshoes on the stresses of the foot skeleton in vivo. This preliminary study introduces a novel methodology combining three-dimensional data from biplanar radiography with inverse dynamics methods and finite element analysis (FEA) to evaluate the effect of a stainless steel shoe on the function of a Thoroughbred horse's forefoot during walking. Our preliminary results suggest that the stainless steel shoe shifts craniocaudal, mediolateral and vertical GRFs at mid-stance. We document a similar pattern of flexion-extension in the PIP (pastern) and DIP (coffin) joints between the unshod and shod conditions, with slight variation in rotation angles throughout the stance phase. For both conditions, the PIP and DIP joints begin in a flexed posture and extend over the entire stance phase. At mid-stance, small differences in joint angle are observed in the PIP joint, with the shod condition being more extended than the unshod horse, whereas the DIP joint is extended more in the unshod than the shod condition. We also document that the DIP joint extends more than the PIP after mid-stance and until the end of the stance in both conditions. Our FEA analysis, conducted solely on the bones, shows increased von Mises and Maximum principal stresses on the forefoot phalanges in the shod condition at mid-stance, consistent with the tentative conclusion that a steel shoe might increase mechanical loading. However, because of our limited sample size none of these apparent differences have been tested for statistical significance. Our preliminary study illustrates how the shoe may influence the dynamics and mechanics of a Thoroughbred horse's forefoot during slow walking, but more research is needed to quantify the effect of the shoe on the equine forefoot during the whole stance phase, at faster speeds/gaits and with more individuals as well as with a similar focus on the hind feet. We anticipate that our preliminary analysis using advanced methodological approaches will pave the way for new directions in research on the form/function relationship of the equine foot, with the ultimate goal to minimise foot injuries and improve animal health and welfare.

Project description:Spiral drawings on paper are used as routine measures in hospitals to assess Parkinson's Disease motor deficiencies. In the age of emerging mobile health tools and Artificial Intelligence a comprehensive digital setup enables granular biomarker analyses and improved differential diagnoses in movement disorders. This study aims to evaluate on discriminatory features among Parkison's Disease patients, healthy subjects and diverse movement disorders. Overall, 24 Parkinson's Disease patients, 27 healthy controls and 26 patients with similar differential diagnoses were assessed with a novel tablet-based system. It utilizes an integrative assessment by combining a structured symptoms questionnaire-the Parkinson's Disease Non-Motor Scale-and 2-handed spiral drawing captured on a tablet device. Three different classification tasks were evaluated: Parkinson's Disease patients versus healthy control group (Task 1), all Movement disorders versus healthy control group (Task 2) and Parkinson's Disease patients versus diverse other movement disorder patients (Task 3). To systematically study feature importances of digital biomarkers a Machine Learning classifier is cross-validated and interpreted with SHapley Additive exPlanations (SHAP) values. The number of non-motor symptoms differed significantly for Tasks 1 and 2 but not for Task 3. The proposed drawing features partially differed significantly for all three tasks. The diagnostic accuracy was on average 94.0% in Task 1, 89.4% in Task 2, and 72% in Task 3. While the accuracy in Task 3 only using the symptom questionnaire was close to the baseline, it greatly improved when including the tablet-based features from 60 to 72%. The accuracies for all three tasks were significantly improved by integrating the two modalities. These results show that tablet-based drawing features can not only be captured by consumer grade devices, but also capture specific features to Parkinson's Disease that significantly improve the diagnostic accuracy compared to the symptom questionnaire. Therefore, the proposed system provides an objective type of disease characterization of movement disorders, which could be utilized for home-based assessments as well.Clinicaltrials.gov Study-ID: NCT03638479.

Project description:IntroductionArtificial cervical disc replacement (ACDR) is a widely accepted surgical procedure in the treatment of cervical radiculopathy and myelopathy. However, some research suggests that ACDR may redistribute more load onto the facet joints, potentially leading to postoperative axial pain in certain patients. Earlier studies have indicated that facet tropism is prevalent in the lower cervical spine and can significantly increase facet joint pressure. The present study aims to investigate the changes in the biomechanical environment of the cervical spine after ACDR using different prosthese when facet tropism is present.MethodsA C2-C7 cervical spine finite element model was created. Symmetrical, moderate asymmetrical (7 degrees tropism), and severe asymmetrical (14 degrees tropism) models were created at the C5/C6 level by adjusting the left-side facet. C5/C6 ACDR with Prestige LP, Prodisc-C vivo, and Mobi-C were simulated in all models. A 75 N follower load and 1 N⋅m moment was applied to initiate flexion, extension, lateral bending, and axial rotation, and the range of motions (ROMs), facet contact forces(FCFs), and facet capsule stress were recorded.ResultsIn the presence of facet tropism, all ACDR models exhibited significantly higher FCFs and facet capsule stress compared to the intact model. In the asymmetric model, FCFs on the right side were significantly increased in neutral position, extension, left bending and right rotation, and on both sides in right bending and left rotation compared to the symmetric model. All ACDR model in the presence of facet tropism, exhibited significantly higher facet capsule stresses at all positions compared to the symmetric model. The stress distribution on the facet surface and the capsule ligament in the asymmetrical models was different from that in the symmetrical model.ConclusionsThe existence of facet tropism could considerably increase FCFs and facet capsule stress after ACDR with Prestige-LP, Prodisc-C Vivo, and Mobi-C. None of the three different designs of implants were able to effectively protect the facet joints in the presence of facet tropism. Research into designing new implants may be needed to improve this situation. Clinical trials are needed to validate the impact of facet tropism.

Project description:Competition is a major determinant of plant community structure consisting of both species-specific and general interactions, either of which may influence competitive competency and plant abundance and size. In certain cases, competitive competency could arise from altered gene expression and plant function when an individual is confronted with new competitors. We explored competition at the molecular level by hybridizing transcripts from Centaurea maculosa (spotted knapweed), one of North America's most invasive exotic plant species, to an Arabidopsis microarray chip. Centaurea was grown in competition with Festuca idahoensis (Idaho fescue), a native grass species that generally has weak competitive effects against Centaurea; Gaillardia aristata (Indian blanketflower), a native herbaceous species that tends to be a much stronger competitor against Centaurea; or alone (control). The expression of some genes was found to be relatively uninfluenced by the type of plant neighbor, whereas other patterns of gene expression appeared to be more neighbor specific. To our knowledge, these results are the first to identify genes in an invasive plant that are induced or repressed by plant neighbors and provide a new avenue of insight into the molecular aspects of plant competitive ability. Keywords: treated vs.untreated First file, Chip 508 (9-9-05) is preliminary hyb data to see if this cross species hybridization is possible using the OAR27K chip Experiment 1 (chip 508): The Arabidopsis OAR27K gene chip was hybridized with labeled cDNA probes produced from samples of Centaurea RNA at the W.M. Keck Foundation Biotechnology Resource Laboratory, Yale University. The OAR27K gene chip consists of 70-mer oligos representing approximately 27,000 genes from Arabidopsis. Leaf and root samples were reverse-transcribed into cDNA and labeled with different fluorescent dyes (Cy3 and Cy5) using the Genisphere Array 900 kit (Cat No.W500180) (Genisphere, Hatfield PA). Labeled cDNAs were hybridized to the OAR27Kchip using the Advalytix ArrayBooster DNA Microarray Incubator (Advalytix, Boston MA). Approximately 10ug of each sample was used for hybridization.Experiment 2: Hybridization and labeling followed the procedure above, except the experimental control was Centaurea plants grown alone, and the test situations were Centaurea grown with Gaillardia or Festuca neighbors. In each experiment, RNA from Centaurea grown alone was used as the control (labeled with Cy3) and RNA from Centaurea grown with a neighbor was used as the test (labeled with Cy5). Two replicates were performed for each test situation.

Dataset Information

Effect of polyester-based artificial tendons on movement biomechanics: A preliminary in vivo study.

Publications

Effect of polyester-based artificial tendons on movement biomechanics: A preliminary in vivo study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets