Dataset Information

Adsorption and Removal of Tetrabromobisphenol A by Adsorption on Functionalized Mesoporous Silica Nanotubes: Isotherms, Kinetics, Thermodynamics, and Optimization via Box-Behnken Design.

ABSTRACT: In pursuit of environmental safety, a novel and efficient method-dispersive solid-phase extraction based on functionalized mesoporous silica nanotubes (FMSNT nanoadsorbent)-was developed to remove tetrabromobisphenol A (TBBPA) from water samples. Characterization and comprehensive analysis of the FMSNT nanoadsorbent, including maximum adsorption capacity of 815.85 mg g^-1 for TBBPA and its water stability, confirmed its potential. Subsequent analysis revealed the impact of multiple factors, for instance pH, concentration, dose, ionic strength, time, and temperature, on the adsorption process. The findings revealed that the adsorption of TBBPA followed the Langmuir and pseudo-second-order kinetics models while primarily driven by hydrogen bond interactions between bromine ions or hydroxyl groups of TBBPA and amino protons around the cavity. The novel FMSNT nanoadsorbent showed high stability and efficiency even after five times of recycling. Moreover, the overall process was identified as chemisorption, endothermic, and spontaneous. Finally, the Box-Behnken design was applied to optimize the results, confirming good reusability even after five cycles.

SUBMITTER: AlSalem HS

PROVIDER: S-EPMC10249080 | biostudies-literature | 2023 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Adsorption and Removal of Tetrabromobisphenol A by Adsorption on Functionalized Mesoporous Silica Nanotubes: Isotherms, Kinetics, Thermodynamics, and Optimization via Box-Behnken Design.

AlSalem Huda Salem HS Algethami Faisal K FK Al-Goul Soha Talal ST Shahat Ahmed A

ACS omega 20230520 22

In pursuit of environmental safety, a novel and efficient method-dispersive solid-phase extraction based on functionalized mesoporous silica nanotubes (FMSNT nanoadsorbent)-was developed to remove tetrabromobisphenol A (TBBPA) from water samples. Characterization and comprehensive analysis of the FMSNT nanoadsorbent, including maximum adsorption capacity of 815.85 mg g<sup>-1</sup> for TBBPA and its water stability, confirmed its potential. Subsequent analysis revealed the impact of multiple fac ...[more]

PMID: 37305314

Similar Datasets

Project description:The progress of industrial and agricultural pursuits, along with the release of inadequately treated effluents especially phenolic pollutant, has amplified the pollution load on environment. These organic compounds pose considerable challenges in both drinking water and wastewater systems, given their toxicity, demanding high oxygen and limited biodegradability. Thus, developing an eco-friendly, low-cost and highly efficient adsorbent to treat the organic pollutants has become an important task. The present investigation highlights development of a novel adsorbent (CFPAC) by activation of Cassia fistula pod shell for the purpose of removing phenol and 2,4-dichlorophnenol (2,4-DCP). The significant operational factors (dosage, pH, concentration, temperature, speed) were also investigated. The factors such as pH = 2 and T = 20°C were found to be significant at 1.6 g/L and 0.6 g/L dosage for phenol and 2,4-DCP respectively. Batch experiments were further conducted to study isotherms, kinetic and thermodynamics studies for the removal of phenol and 2,4-DCP. The activated carbon was characterised as mesoporous (specific surface area 1146 m2/g, pore volume = 0.8628 cc/g), amorphous and pHPZC = 6.4. At optimum conditions, the maximum sorption capacity for phenol and 2,4-DCP were 183.79 mg/g and 374.4 mg/g respectively. The adsorption isotherm was better conformed to Redlich Peterson isotherm (phenol) and Langmuir isotherm (2,4-DCP). The kinetic study obeyed pseudo-second-order type behaviour for both the pollutants with R2 > 0.999. The thermodynamic studies and the value of isosteric heat of adsorption for both the pollutants suggested that the adsorption reaction was dominated by physical adsorption (ΔHx < 80 kJ/mol). Further, the whole process was feasible, exothermic and spontaneous in nature. The overall studies suggested that the activated carbon synthesised from Cassia fistula pods can be a promising adsorbent for phenolic compounds.

Dataset Information

Adsorption and Removal of Tetrabromobisphenol A by Adsorption on Functionalized Mesoporous Silica Nanotubes: Isotherms, Kinetics, Thermodynamics, and Optimization via Box-Behnken Design.

Publications

Adsorption and Removal of Tetrabromobisphenol A by Adsorption on Functionalized Mesoporous Silica Nanotubes: Isotherms, Kinetics, Thermodynamics, and Optimization via Box-Behnken Design.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets