Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Application of a Mixed-Ligand Metal-Organic Framework in Photocatalytic CO₂ Reduction, Antibacterial Activity and Dye Adsorption.

ABSTRACT: In this paper, a known mixed-ligand MOF {[Co₂(TZMB)₂(1,4-bib)_0.5(H₂O)₂]·(H₂O)₂}_n (compound 1) was reproduced, and its potential application potential was explored. It was found that compound 1 had high photocatalytic activity for CO₂ reduction. After 12 h of illumination, the formation rate of CO, which is the product of CO₂ reduction by compound 1, reached 3012.5 μmol/g/h. At the same time, compound 1 has a good antibacterial effect on Staphylococcus aureus (S. aureus), Escherichia coli (E. coli) and Candida albicans (C. albicans), which has potential research value in the medical field. In addition, compound 1 can effectively remove Congo Red from aqueous solutions and achieve the separation of Congo red from mixed dye solutions.

SUBMITTER: Jing H

PROVIDER: S-EPMC10343588 | biostudies-literature | 2023 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Application of a Mixed-Ligand Metal-Organic Framework in Photocatalytic CO2 Reduction, Antibacterial Activity and Dye Adsorption.

Jing Hongwei H Zhao Lun L Song Guanying G Li Jiayu J Wang Ziyun Z Han Yue Y Wang Zhexin Z

Molecules (Basel, Switzerland) 20230704 13

In this paper, a known mixed-ligand MOF {[Co2(TZMB)2(1,4-bib)0.5(H2O)2]·(H2O)2}n (compound 1) was reproduced, and its potential application potential was explored. It was found that compound 1 had high photocatalytic activity for CO2 reduction. After 12 h of illumination, the formation rate of CO, which is the product of CO2 reduction by compound 1, reached 3012.5 μm ...[more]

PMID: 37446866

Similar Datasets

Application of a Metal Cobalt Based on 4,6-Bis(imidazol-1-yl)isophthalicacid Metal-Organic -Framework Materials in Photocatalytic CO2 Reduction, Antibacterial, and Dye Adsorption.

Project description:In this paper, the reported MOF ([Co(bimip)(H2O)0.5]·0.5H2O) was employed in photocatalytic CO2 reduction, antibacterial, and dye adsorption experiments. The photocatalytic activity of the MOF for CO2 reduction was systematically investigated. The high average CO generation rate of 3421.59 μmol·g-1·h-1 after 12 h confirms the efficient photocatalytic CO2 reduction ability of the MOF. At the same time, the MOF can completely inhibit the growth of S. aureus and C. albicans within 24 h when its concentration reaches 400 μg/mL and 500 μg/mL, respectively. The MOF has an adsorption capacity for CR. The adsorption rate was 83.42% at 60 min, and the adsorption capacity of the MOF for CR reached 500.00 mg·g-1.

| S-EPMC10537682 | biostudies-literature

Photocatalytic Hydrogen Peroxide Production by a Mixed Ligand-Functionalized Uranyl-Organic Framework.

Project description:Hydrogen peroxide (H2O2) production driven by solar energy has received enormous attention due to its high efficiency, low cost, and environmental friendliness characteristics. Searching for new photocatalytic materials for H2O2 production is one of the most important targets. In this work, a new three-dimensional (3D) uranyl-organic framework material was constructed with mixed ligands via a solvothermal reaction and used for photocatalytic H2O2 production. The mixed ligand strategy not only benefits the construction of a 3D uranyl-organic framework but also introduces strong photon absorption groups into the framework. The thiophene and pyridine rings in the framework enhance photon absorption and carrier transfer. In addition, with the assistance of the hydrogen abstraction reaction of uranyl centers, the H2O2 production rate reaches 345 μmol h-1 g-1. This study provides a new blueprint for exploring the artificial photosynthesis of H2O2 through uranium-based metal-organic frameworks.

| S-EPMC11307301 | biostudies-literature

Trimetallic composite nanofibers for antibacterial and photocatalytic dye degradation of mixed dye water.

Project description:Membrane technology is an advanced approach to making a healthier and cleaner environment. Using such catalytic membrane technology to get clean, usable water by removal of dye impurities as well as pathogenic microbes is the main goal behind the research work. Here, we present the synthesis and efficacy study of polymethyl methacrylate (PMMA)-based Ag/ZnO/TiO2 trimetallic bifunctional nanofibers with antibacterial and photocatalytic activity. The nanofibers have been proven to be effective for the degradation of methylene blue (MB 93.4%), rhodamine B (Rh 34.6%), auramine-O (Au 65.0%) and fuchsin basic (FB 69.8%) dyes individually within 90 min in daylight. The study is further extended in abating a mixture of these dyes from contaminated water using composite nanofibers. Also, in the case of a mixture of these dyes (3 ppm each), nanofibers show dye degradation efficiency (DDE) of 90.9% (MB), 62.4% (Au) and 90.3% (FB and Rh) in 60 min. The role of Ag nanoparticles with a synergic photocatalytic effect on ZnO and TiO2 is also demonstrated. Also, PMMA/ZnO/TiO2 composite fiber membrane in synergy with silver particles shows better antibacterial activity against Gram-negative bacteria E. coli, making PMMA/Ag/ZnO/TiO2 fibers a promising candidate in water purification.

| S-EPMC7446745 | biostudies-literature

Synergistic metal halide perovskite@metal-organic framework hybrids for photocatalytic CO2 reduction.

Project description:The photocatalytic reduction of carbon dioxide (CO2) into multi-electron carbon products remains challenging due to the inherent stability of CO2 and slow multi-electron transfer kinetics. Here in, we synthesized a hybrid material, cesium copper halide (Cs3Cu2I5) intercalated onto two-dimensional (2D) cobalt-based zeolite framework (ZIF-9-III) nanosheets (denoted as Cs3Cu2I5@ZIF-1) through a simple mechanochemical grinding. The synergy in the hybrid effectively reduces CO2 to carbon monoxide (CO) at 110 μmol/g/h and methane at 5 μmol/g/h with high selectivity, suppressing hydrogen evolution. Further, we have investigated additional Cs3Cu2I5@ZIF hybrids with varying ZIF-9-III amounts, confirming their selective CO2 reduction to methane over hydrogen. Density functional theory (DFT) calculations reveal a non-covalent interaction between Cs3Cu2I5 and ZIF-9-III, with electron transfer suggesting potential for improved photocatalysis.

| S-EPMC11439556 | biostudies-literature

Photocatalytic CO2 reduction using La-Ni bimetallic sites within a covalent organic framework.

Project description:The precise construction of photocatalysts with diatomic sites that simultaneously foster light absorption and catalytic activity is a formidable challenge, as both processes follow distinct pathways. Herein, an electrostatically driven self-assembly approach is used, where phenanthroline is used to synthesize bifunctional LaNi sites within covalent organic framework. The La and Ni site acts as optically and catalytically active center for photocarriers generation and highly selective CO2-to-CO reduction, respectively. Theory calculations and in-situ characterization reveal the directional charge transfer between La-Ni double-atomic sites, leading to decreased reaction energy barriers of *COOH intermediate and enhanced CO2-to-CO conversion. As a result, without any additional photosensitizers, a 15.2 times enhancement of the CO2 reduction rate (605.8 μmol·g-1·h-1) over that of a benchmark covalent organic framework colloid (39.9 μmol·g-1·h-1) and improved CO selectivity (98.2%) are achieved. This work presents a potential strategy for integrating optically and catalytically active centers to enhance photocatalytic CO2 reduction.

| S-EPMC10148855 | biostudies-literature

High selectivity of photocatalytic reduction of CO2 to CO based on terpyridine ligand supported CuI metal organic framework.

Project description:In this work, a 4'-(4-cynaophenyl)-4,2':6',4-terpyridine supported CuI MOFs photocatalyst (Cu I MOF) was applied to the photocatalytic CO2 reduction for the first time. The micro-structural and physicochemical properties of the Cu I MOF were systematically studied by the powder X-ray diffraction (PXRD), Single crystal X-ray diffraction (SCXRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR), UV-Vis diffuse spectroscopy (UV-vis DRS), ns-level photoluminescence spectra (ns-level PL), Ultraviolet photoelectron spectroscopy (UPS), and N2 adsorption-desorption test (BET-BJH). Moreover, the in situ diffuse reflectance infrared fourier transform spectroscopy (in situ DRIFTS) was applied to investigate the adsorption and reaction intermediates of photocatalytic CO2 reduction. As a result, Cu I MOF exhibited good performance and outstanding selectivity toward photocatalytic reduction of CO2 to CO under full-spectrum and visible light illumination. Notably, 100% selective photocatalytic conversion of CO2 to CO was achieved. Thus, the study presents the high selectivity and CO2 reduction efficiency of Cu I MOF as a potential family of photocatalysts.

| S-EPMC9388720 | biostudies-literature

WO3/Ag2CO3 Mixed Photocatalyst with Enhanced Photocatalytic Activity for Organic Dye Degradation.

Project description:The development of an efficient photocatalyst with superior activity under visible light has been regarded as a significant strategy for pollutant degradation and environmental remediation. Herein, a series of WO3/Ag2CO3 mixed photocatalysts with different proportions were prepared by a simple mixing method and characterized by XRD, SEM, TEM, XPS, and DRS techniques. The photocatalytic performance of the WO3/Ag2CO3 mixed photocatalyst was investigated by the degradation of rhodamine B (RhB) under visible light irradiation (λ > 400 nm). The photocatalytic efficiency of the mixed WO3/Ag2CO3 photocatalyst was rapidly increased with the proportion of Ag2CO3 up to 5%. The degradation percentage of RhB by WO3/Ag2CO3-5% reached 99.7% within 8 min. The pseudo-first-order reaction rate constant of WO3/Ag2CO3-5% (0.9591 min-1) was 118- and 14-fold higher than those of WO3 (0.0081 min-1) and Ag2CO3 (0.0663 min-1). The catalytic activities of the mixed photocatalysts are not only higher than those of the WO3 and Ag2CO3 but also higher than that of the WO3/Ag2CO3 composite prepared by the precipitation method. The activity enhancement may be because of the easier separation of photogenerated electron-hole pairs. The photocatalytic mechanism was investigated by free radical capture performance and fluorescence measurement. It was found that light-induced holes (h+) was the major active species and superoxide radicals (·O2 -) also played a certain role in photocatalytic degradation of RhB.

| S-EPMC8515572 | biostudies-literature

Construction of a mixed ligand MOF as "green catalyst" for the photocatalytic degradation of organic dye in aqueous media.

Project description:In the past few years, metal-organic frameworks (MOFs) have emerged as a class of fascinating materials for photocatalysis. Herein, a new MOF formulated as [Zn(bpe)(fdc)]·2DMF (BUT-206, bpe = 1,2-bis(4-pyridyl) ethylene, H2fdc = 2,5-furan dicarboxylic acid, DMF = N,N-dimethylformamide) is reported, which was synthesized under solvothermal conditions and applied for photocatalytic degradation of dyes (crystal violet and rhodamine B). Noteworthily, BUT-206 exhibited high photocatalytic activity toward the degradation of crystal violet without using any photosensitizer or cocatalyst under UV-irradiation. The photocatalytic degradation of crystal violet by BUT-206 was effective with a degradation efficiency of 92.5% within 120 minutes. The effects of key parameters including pH, amount of photocatalyst and initial concentration of dye on the dye degradation processes were examined, and the kinetics of dye degradation was established by the pseudo-first order kinetic equation. Furthermore, BUT-206 showed good cyclic stability in photocatalytic performance for up to five regeneration cycles, making it a potential green catalyst for dye degradation.

| S-EPMC9036557 | biostudies-literature

Metal-organic framework membranes with single-atomic centers for photocatalytic CO2 and O2 reduction.

Project description:The demand for sustainable energy has motivated the development of artificial photosynthesis. Yet the catalyst and reaction interface designs for directly fixing permanent gases (e.g. CO2, O2, N2) into liquid fuels are still challenged by slow mass transfer and sluggish catalytic kinetics at the gas-liquid-solid boundary. Here, we report that gas-permeable metal-organic framework (MOF) membranes can modify the electronic structures and catalytic properties of metal single-atoms (SAs) to promote the diffusion, activation, and reduction of gas molecules (e.g. CO2, O2) and produce liquid fuels under visible light and mild conditions. With Ir SAs as active centers, the defect-engineered MOF (e.g. activated NH2-UiO-66) particles can reduce CO2 to HCOOH with an apparent quantum efficiency (AQE) of 2.51% at 420 nm on the gas-liquid-solid reaction interface. With promoted gas diffusion at the porous gas-solid interfaces, the gas-permeable SA/MOF membranes can directly convert humid CO2 gas into HCOOH with a near-unity selectivity and a significantly increased AQE of 15.76% at 420 nm. A similar strategy can be applied to the photocatalytic O2-to-H2O2 conversions, suggesting the wide applicability of our catalyst and reaction interface designs.

| S-EPMC8113524 | biostudies-literature

Host-Guest Interactions in a Metal-Organic Framework Isoreticular Series for Molecular Photocatalytic CO2 Reduction.

Project description:A strategy to improve homogeneous molecular catalyst stability, efficiency, and selectivity is the immobilization on supporting surfaces or within host matrices. Herein, we examine the co-immobilization of a CO2 reduction catalyst [ReBr(CO)3 (4,4'-dcbpy)] and a photosensitizer [Ru(bpy)2 (5,5'-dcbpy)]Cl2 using the isoreticular series of metal-organic frameworks (MOFs) UiO-66, -67, and -68. Specific host pore size choice enables distinct catalyst and photosensitizer spatial location-either at the outer MOF particle surface or inside the MOF cavities-affecting catalyst stability, electronic communication between reaction center and photosensitizer, and consequently the apparent catalytic rates. These results allow for a rational understanding of an optimized supramolecular layout of catalyst, photosensitizer, and host matrix.

| S-EPMC8453824 | biostudies-literature