Project description:We report here the synthesis of polyureas from the dehydrogenative coupling of diamines and diformamides. The reaction is catalysed by a manganese pincer complex and releases H2 gas as the only by-product making the process atom-economic and sustainable. The reported method is greener in comparison to the current state-of-the-art production routes that involve diisocyanate and phosgene feedstock. We also report here the physical, morphological, and mechanical properties of synthesized polyureas. Based on our mechanistic studies, we suggest that the reaction proceeds via isocyanate intermediates formed by the manganese catalysed dehydrogenation of formamides.
Project description:Substituted ureas have numerous applications but their synthesis typically requires the use of highly toxic starting materials. Herein we describe the first base-metal catalyst for the selective synthesis of symmetric ureas via the dehydrogenative coupling of methanol with primary amines. Using a pincer supported iron catalyst, a range of ureas was generated with isolated yields of up to 80% (corresponding to a catalytic turnover of up to 160) and with H2 as the sole byproduct. Mechanistic studies indicate a stepwise pathway beginning with methanol dehydrogenation to give formaldehyde, which is trapped by amine to afford a formamide. The formamide is then dehydrogenated to produce a transient isocyanate, which reacts with another equivalent of amine to form a urea. These mechanistic insights enabled the development of an iron-catalyzed method for the synthesis of unsymmetric ureas from amides and amines.
Project description:Base-metal catalyzed dehydrogenative self-coupling of 2-amino alcohols to selectively form functionalized 2,5-substituted pyrazine derivatives is presented. Also, 2-substituted quinoxaline derivatives are synthesized by dehydrogenative coupling of 1,2-diaminobenzene and 1,2-diols. In both cases, water and hydrogen gas are formed as the sole byproducts. The reactions are catalyzed by acridine-based pincer complexes of earth-abundant manganese.
Project description:Hydrolyzable polymers are widely used materials that have found numerous applications in biomedical, agricultural, plastic, and packaging industrials. They usually contain ester and other hydrolyzable bonds, such as anhydride, acetal, ketal, or imine, in their backbone structures. Here, we report the first design of hydrolyzable polyureas bearing dynamic hindered urea bonds (HUBs) that can reversibly dissociate to bulky amines and isocyanates, the latter of which can be further hydrolyzed by water, driving the equilibrium to facilitate the degradation of polyureas. Polyureas bearing 1-tert-butyl-1-ethylurea bonds that show high dynamicity (high bond dissociation rate), in the form of either linear polymers or cross-linked gels, can be completely degraded by water under mild conditions. Given the simplicity and low cost for the production of polyureas by simply mixing multifunctional bulky amines and isocyanates, the versatility of the structures, and the tunability of the degradation profiles of HUB-bearing polyureas, these materials are potentially of very broad applications.
Project description:We report on an additive-free Mn(I)-catalyzed dehydrogenative silylation of terminal alkenes. The most active precatalyst is the bench-stable alkyl bisphosphine Mn(I) complex fac-[Mn(dippe)(CO)3(CH2CH2CH3)]. The catalytic process is initiated by migratory insertion of a CO ligand into the Mn-alkyl bond to yield an acyl intermediate which undergoes rapid Si-H bond cleavage of the silane HSiR3 forming the active 16e- Mn(I) silyl catalyst [Mn(dippe)(CO)2(SiR3)] together with liberated butanal. A broad variety of aromatic and aliphatic alkenes was efficiently and selectively converted into E-vinylsilanes and allylsilanes, respectively, at room temperature. Mechanistic insights are provided based on experimental data and DFT calculations revealing that two parallel reaction pathways are operative: an acceptorless reaction pathway involving dihydrogen release and a pathway requiring an alkene as sacrificial hydrogen acceptor.
Project description:In this paper Pd-catalyzed intramolecular dehydrogenative C(sp3)-H amidation for the synthesis of isoindolinones is described. This method features the use of a Pd/C catalyst and the addition of a stoichiometric amount of oxidant is not necessary. A mechanistic study suggested the possible formation of H2 gas during the reaction.
Project description:The visible-light photoredox/[Co(III)] cocatalyzed dehydrogenative functionalization of cyclic and acyclic styryl derivatives with carboxylic acids is documented. The methodology enables the chemo- and regioselective allylic functionalization of styryl compounds, leading to allylic carboxylates (32 examples) under stoichiometric acceptorless conditions. Intermolecular as well as intramolecular variants are documented in high yields (up to 82%). A mechanistic rationale is also proposed on the basis of a combined experimental and spectroscopic investigation.
Project description:A novel Pd-catalyzed intermolecular dehydrogenative annulation of aryl iodides and aryl carbamic chlorides for the efficient synthesis of phenanthridinone derivatives was developed. Simple aryl iodides and carbamic chlorides readily made from various anilines, a broad substrate scope with hetero/polycycles, as well as high-value products, make this direct dehydrogenative annulation approach very practical and attractive.
Project description:We have recently reported the previously unknown synthesis of thioesters by coupling thiols and alcohols (or aldehydes) with liberation of H2, as well as the reverse hydrogenation of thioesters, catalyzed by a well-defined ruthenium acridine-9H based pincer complex. These reactions are highly selective and are not deactivated by the strongly coordinating thiols. Herein, the mechanism of this reversible transformation is investigated in detail by a combined experimental and computational (DFT) approach. We elucidate the likely pathway of the reactions, and demonstrate experimentally how hydrogen gas pressure governs selectivity toward hydrogenation or dehydrogenation. With respect to the dehydrogenative process, we discuss a competing mechanism for ester formation, which despite being thermodynamically preferable, it is kinetically inhibited due to the relatively high acidity of thiol compared to alcohol and, accordingly, the substantial difference in the relative stabilities of a ruthenium thiolate intermediate as opposed to a ruthenium alkoxide intermediate. Accordingly, various additional reaction pathways were considered and are discussed herein, including the dehydrogenative coupling of alcohol to ester and the Tischenko reaction coupling aldehyde to ester. This study should inform future green, (de)hydrogenative catalysis with thiols and other transformations catalyzed by related ruthenium pincer complexes.
Project description:The reduction of polar bonds, in particular carbonyl groups, is of fundamental importance in organic chemistry and biology. Herein, we report a manganese pincer complex as a versatile catalyst for the transfer hydrogenation of amides, carbamates, urea derivatives, and even polyurethanes leading to the corresponding alcohols, amines, and methanol as products. Since these compound classes can be prepared using CO2 as a C1 building block the reported reaction represents an approach to the indirect reduction of CO2. Notably, these are the first examples on the reduction of carbamates and urea derivatives as well as on the C-N bond cleavage in amides by transfer hydrogenation. The general applicability of this methodology is highlighted by the successful reduction of 12 urea derivatives, 26 carbamates and 11 amides. The corresponding amines, alcohols and methanol were obtained in good to excellent yields up to 97%. Furthermore, polyurethanes were successfully converted which represents a viable strategy towards a circular economy. Based on control experiments and the observed intermediates a feasible mechanism is proposed.