Long-Lived Photo-Response of Multi-Layer N-Doped Graphene-Based Films
Ontology highlight
ABSTRACT:
SUBMITTER: Odutola J
PROVIDER: S-EPMC10510389 | biostudies-literature | 2023 Aug
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Nitrogen-incorporated ultrananocrystalline diamond (N-UNCD) and multi-layer-graphene-like hybrid carbon films have been synthesized by microwave plasma enhanced chemical vapor deposition (MPECVD) on oxidized silicon which is pre-seeded with diamond nanoparticles. MPECVD of N-UNCD on nanodiamond seeds produces a base layer, from which carbon structures nucleate and grow perpendicularly to form standing carbon platelets. High-resolution transmission electron microscopy and Raman scattering measurements reveal that these carbon platelets are comprised of ultrananocrystalline diamond embedded in multilayer-graphene-like carbon structures. The hybrid carbon films are of low electrical resistivity. UNCD grains in the N-UNCD base layer and the hybrid carbon platelets serve as high-density diamond nuclei for the deposition of an electrically insulating UNCD film on it. Biocompatible carbon-based heaters made of low-resistivity hybrid carbon heaters encapsulated by insulating UNCD for possible electrosurgical applications have been demonstrated.
| S-EPMC3970192 | biostudies-other
Project description:Anthracene-(aminomethyl)phenylboronic acid pinacol ester (AminoMePhenylBPin) OF-2 acts as a PET (photo-induced electron transfer)-type fluorescent sensor for determination of a trace amount of water: the addition of water to organic solvents containing OF-2 causes a drastic and linear enhancement of fluorescence emission as a function of water content, which is attributed to the suppression of PET. Indeed, detection limits (DLs) for OF-2 were as low as 0.01-0.008 wt% of water in solvents, that is, the PET method makes it possible to visualize, detect, and determine a trace amount of water. Thus, in this work, in order to develop fluorescent polymeric materials for visualization and detection of water, we have achieved the preparation of various types of polymer films (polystyrene (PS), poly(4-vinylphenol) (PVP), polyvinyl alcohol (PVA), and polyethylene glycol (PEG)) which were doped with OF-2, and investigated the optical sensing properties of the OF-2-doped polymer films for water. As-prepared OF-2-doped polymer films initially exhibited green excimer emission in the PET active state, but blue monomer emission in the PET inactive state upon exposure to moisture or by water droplet. Moreover, it was found that the OF-2-doped polymer films show the reversible fluorescence properties in the dry-wet process. Herein we propose that polymer films doped with PET-type fluorescent sensors for water based on a fluorescence enhancement (turn-on) system are one of the most promising and convenient functional materials for visualizing moisture and water droplets.
| S-EPMC9031300 | biostudies-literature
Project description:In this work, nitrogen (N)-doped graphene film is synthesized, as a photo-catalyst, on one side of the copper foam by chemical vapor deposition and the copper foam is directly used as an electrode after porous Pd@rGO cathode loading to the other side of the foam for the photo-assisted charging of the Li-ion oxygen battery. The amount of urea (CO(NH2)2), which is used as N atom source, is optimized to get maximum photo-anodic currents from the n-type graphene films. The optical band gap and the valance band edge potential of the optimized N-doped graphene film are determined as 2.00 eV and 3.71 VLi+/Li, respectively. X-ray photoelectron spectra provided that the atomic percent of N atoms in the graphene film is 1.34% and the graphitic, pyrrolic and pyridinic N atom percentages are 54.01%, 42.20% and 3.79%, respectively. The photo-assisted charging tests indicated that the N-doped graphene film photo-catalyst reduced the charging potential significantly even at 1000 mA g-1 (0.1 mA cm-2) current density and improved the cyclic discharge-charge performance of the Li-ion oxygen battery considerably.
| S-EPMC10784194 | biostudies-literature
Project description:We introduce high-performance metal mesh/graphene hybrid transparent conductive layers (TCLs) using prime-location and metal-doped graphene in near-ultraviolet light-emitting diodes (NUV LEDs). Despite the transparency and sheet resistance values being similar for hybrid TCLs, there were huge differences in the NUV LEDs' electrical and optical properties depending on the location of the graphene layer. We achieved better physical stability and current spreading when the graphene layer was located beneath the metal mesh, in direct contact with the p-GaN layer. We further improved the contact properties by adding a very thin Au mesh between the thick Ag mesh and the graphene layer to produce a dual-layered metal mesh. The Au mesh effectively doped the graphene layer to create a p-type electrode. Using Raman spectra, work function variations, and the transfer length method (TLM), we verified the effect of doping the graphene layer after depositing a very thin metal layer on the graphene layers. From our results, we suggest that the nature of the contact is an important criterion for improving the electrical and optical performance of hybrid TCLs, and the method of doping graphene layers provides new opportunities for solving contact issues in other semiconductor devices.
| S-EPMC5579003 | biostudies-literature
Project description:In this paper, the Ag-doped zinc oxide nanorods embedded reduced graphene oxide (ZnO:Ag/rGO) nanocomposite was synthesized for photocatalytic degradation of methyl orange (MO) in the water. The microstructural results confirmed the successful decoration of Ag-doped ZnO nanorods on rGO matrix. The photocatalytic properties, including photocatalytic degradation, charge transfer kinetics and photocurrent generation, are systematically investigated using electrochemical impedance spectroscopy (EIS), photocurrent transient response (PCTR) and open circuit voltage decay (OCVD). The results of photocatalytic dye degradation measurements indicated that ZnO:Ag/rGO nanocomposite is more effective than pristine ZnO to degrade the MO dye, and the degradation rate reached 40.6% in 30 min. The decomposition of MO with ZnO:Ag/rGO nanostructure followed first-order reaction kinetics with a reaction rate constant (K a) of 0.01746 min-1. The EIS, PCTR and OCVD measurements revealed that the Ag doping and incorporation of rGO could suppress the recombination probability in ZnO by the separation of photo-generated electron-hole pairs, which leads to the enhanced photocurrent generation and photocatalytic activity. The photocurrent density of ZnO:Ag/rGO, ZnO/rGO and pristine ZnO are 206, 121.4 and 88.8 nA cm-2, respectively.
| S-EPMC6408384 | biostudies-literature
Project description:The novel proposal of Wang's triboelectric nanogenerator (TENG) has inspired extensive efforts to explore energy harvesting devices from the living environment for the upcoming low-carbon society. The inevitable friction and wear problems of the tribolayer materials become one of the biggest obstacles for attaining high-performance TENGs. To achieve super-low friction electrification of the TENGs, the tribological and electrical behaviors of the sliding-mode TENGs based on polytetrafluoroethylene (PTFE) films and metallic balls under both dry friction and liquid lubrication conditions were investigated by using a customized testing platform with a ball-on-flat configuration. Most interestingly, a super-low friction coefficient of 0.008 was achieved under graphene-doped silicone oil lubrication. The corresponding wear rate of the PTFE film was drastically decreased to 8.19 × 10-5 mm3/Nm. Simultaneously, the output short-circuit current and open-circuit voltage were enhanced by 6.8 times and 3.0 times, respectively, compared to the dry friction condition. The outstanding triboelectrical performances of the PTFE film when sliding against a steel ball are attributed to the synergistic lubricating effects of the silicone oil and the graphene nanosheets. The current research provides valuable insights into achieving the macro-scale superlubricity of the TENGs in practical industrial applications.
| S-EPMC10536030 | biostudies-literature
Project description:The addition of nanomaterials to polymers can result not only in significant material property improvements, but also assist in creating entirely new composite functionalities. By dispersing graphene nanoplatelets (GNPs) within a polydimethylsiloxane matrix, we show that efficient light absorption by GNPs and subsequent energy transduction to the polymeric chains can be used to controllably produce significant amounts of motion through entropic elasticity of the pre-strained composite. Using dual actuators, a two-axis sub-micron resolution stage was developed, and allowed for two-axis photo-thermal positioning (~100 μm per axis) with 120 nm resolution (feedback sensor limitation), and ~5 μm/s actuation speeds. A PID control loop automatically stabilizes the stage against thermal drift, as well as random thermal-induced position fluctuations (up to the bandwidth of the feedback and position sensor). Maximum actuator efficiency values of ~0.03% were measured, approximately 1000 times greater than recently reported for light-driven polymer systems.
| S-EPMC3664893 | biostudies-literature
Project description:UnlabelledPerovskite solar cells are becoming one of the leading technologies to reduce our dependency on traditional power sources. However, the frequently used component poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PedotPSS) has several shortcomings, such as an easily corroded indium-tin-oxide (ITO) interface at elevated temperatures and induced electrical inhomogeneity. Herein, we propose solution-processed nitrogen-doped graphene oxide nanoribbons (NGONRs) as a hole transport layer (HTL) in perovskite solar cells, replacing the conducting polymerPedotPSS. The conversion efficiency of NGONR-based perovskite solar cells has outperformed a control device constructed usingPedotPSS. Moreover, our proposed NGONR-based devices also demonstrate a negligible current hysteresis along with improved stability. This work provides an effective route for substitutingPedotPSS as the effective HTL.
| S-EPMC4899776 | biostudies-literature
Project description:New synthesis routes to tailor graphene properties by controlling the concentration and chemical configuration of dopants show great promise. Herein we report the direct reproducible synthesis of 2-3% nitrogen-doped 'few-layer' graphene from a solid state nitrogen carbide a-C:N source synthesized by femtosecond pulsed laser ablation. Analytical investigations, including synchrotron facilities, made it possible to identify the configuration and chemistry of the nitrogen-doped graphene films. Auger mapping successfully quantified the 2D distribution of the number of graphene layers over the surface, and hence offers a new original way to probe the architecture of graphene sheets. The films mainly consist in a Bernal ABA stacking three-layer architecture, with a layer number distribution ranging from 2 to 6. Nitrogen doping affects the charge carrier distribution but has no significant effects on the number of lattice defects or disorders, compared to undoped graphene synthetized in similar conditions. Pyridinic, quaternary and pyrrolic nitrogen are the dominant chemical configurations, pyridinic N being preponderant at the scale of the film architecture. This work opens highly promising perspectives for the development of self-organized nitrogen-doped graphene materials, as synthetized from solid carbon nitride, with various functionalities, and for the characterization of 2D materials using a significant new methodology.
| S-EPMC5818613 | biostudies-literature
Project description:We predict the existence of low-frequency nonlocal plasmons at the vacuum-surface interface of a superlattice of N graphene layers interacting with conducting substrate. We derive a dispersion function that incorporates the polarization function of both the graphene monolayers and the semi-infinite electron liquid at whose surface the electrons scatter specularly. We find a surface plasmon-polariton that is not damped by particle-hole excitations or the bulk modes and which separates below the continuum mini-band of bulk plasmon modes. The surface plasmon frequency of the hybrid structure always lies below ωs = ωp/√2, the surface plasmon frequency of the conducting substrate. The intensity of this mode depends on the distance of the graphene layers from the conductor's surface, the energy band gap between valence and conduction bands of graphene monolayer and, most importantly, on the number of two-dimensional layers. For a sufficiently large number of layers (N ≥ 7) the hybrid structure has no surface plasmon. The existence of plasmons with different dispersion relations indicates that quasiparticles with different group velocity may coexist for various ranges of wavelengths determined by the number of layers in the superlattice.
| S-EPMC4756674 | biostudies-other