Hybrid bronzes: mixed-valence organic–inorganic metal oxides as a tunable material platform† † Electronic supplementary information (ESI) available: Experimental details, diffraction patterns, spectra, and supplemental discussion. CCDC 2282208, 2282209, and 2282218. For ESI and crystallographic data in CIF or other electronic format see DOI: https://doi.org/10.1039/d3sc03828a
Ontology highlight
ABSTRACT:
SUBMITTER: Dayaratne W
PROVIDER: S-EPMC10566514 | biostudies-literature | 2023 Sep
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Polarons are a type of localized excess charge in materials and often form in transition metal oxides. The large effective mass and confined nature of polarons make them of fundamental interest for photochemical and electrochemical reactions. The most studied polaronic system is rutile TiO2 where electron addition results in small polaron formation through the reduction of Ti(IV) d0 to Ti(III) d1 centers. Using this model system, we perform a systematic analysis of the potential energy surface based on semiclassical Marcus theory parametrized from the first-principles potential energy landscape. We show that F-doped TiO2 only binds polaron weakly with effective dielectric screening after the second nearest neighbor. To tailor the polaron transport, we compare TiO2 to two metal-organic frameworks (MOFs): MIL-125 and ACM-1. The choice of MOF ligands and connectivity of the TiO6 octahedra largely vary the shape of the diabatic potential energy surface and the polaron mobility. Our models are applicable to other polaronic materials.
| S-EPMC10173375 | biostudies-literature
Project description:Fully triggering the deep-seated potential of traditional nanomaterials, such as the classic spinel family, is of paramount importance in the field of materials science, which is yet believed to heavily depend on advanced conceptual designs and synthetic strategies. Herein, a type of inorganic-organic hybrid spinel oxide is designed using a π-conjugated azobenzene single-tooth coordination method to overcome their stubborn problems of moderate activity and phase instability in electrocatalytic reactions. Taking spinel Co3O4 nanocubes as a pre-catalyst, after subtle etching of the cube surfaces, some oxygen atoms in the tetrahedral Co-O coordination field are replaced and selectively linked to weakly polar azo-extended π-conjugated units (π*-N=N-π*) via electrophilic carboxyl groups. The π-conjugation structure in Co3O4 suppresses the covalency competition between the tetrahedral and octahedral Co-O coordination fields, successfully preventing the phase transition during the electrocatalytic process and improving the electrocatalytic activity and durability. This study not only expands the spinel family but also provides useful guidelines for developing advanced functional materials.
| S-EPMC11904030 | biostudies-literature
Project description:Exciton-polaritons are quasiparticles consisting of a linear superposition of photonic and excitonic states, offering potential for nonlinear optical devices. The excitonic component of the polariton provides a finite Coulomb scattering cross section, such that the different types of exciton found in organic materials (Frenkel) and inorganic materials (Wannier-Mott) produce polaritons with different interparticle interaction strength. A hybrid polariton state with distinct excitons provides a potential technological route towards in situ control of nonlinear behaviour. Here we demonstrate a device in which hybrid polaritons are displayed at ambient temperatures, the excitonic component of which is part Frenkel and part Wannier-Mott, and in which the dominant exciton type can be switched with an applied voltage. The device consists of an open microcavity containing both organic dye and a monolayer of the transition metal dichalcogenide WS2. Our findings offer a perspective for electrically controlled nonlinear polariton devices at room temperature.
| S-EPMC5247603 | biostudies-literature
Project description:Accomplishing on-demand molecular separation with a high selectivity and good permeability is very desirable for pollutant removal and chemical and pharmaceutical processing. The major challenge for sub-10 nm filtration of particles and molecules is the fabrication of high-performance membranes with tunable pore size and designed functionality. Here, a versatile top-down approach is demonstrated to produce such a membrane using isoporous block copolymer membranes with well-defined pore sizes combined with growth of metal oxide using sequential infiltration synthesis and atomic layer deposition (SIS and ALD). The pore size of the membranes is tuned by controlled metal oxide growth within and onto the polymer channels, enabling up to twofold pore diameter reduction. Following the growth, the distinct functionalities are readily incorporated along the membrane nanochannels with either hydrophobic, cationic, or anionic groups via straightforward and scalable gas/liquid-solid interface reactions. The hydrophilicity/hydrophobicity of the membrane nanochannel is significantly changed by the introduction of hydrophilic metal oxide and hydrophobic fluorinated groups. The functionalized membranes exhibit a superior selectivity and permeability in separating 1-2 nm organic molecules and fractionating similar-sized proteins based on size, charge, and hydrophobicity. This demonstrates the great potential of organic-inorganic-organic isoporous membranes for high-performance molecular separation in numerous applications.
| S-EPMC11469200 | biostudies-literature
Project description:SINGLE CRYSTALS OF THE NEW TITLE COMPOUND [SYSTEMATIC NAME: 1,4,7,10-tetra-zoniadecane hexa-chloridorhodate(III) chloride], [H(3)N(CH(2))(2)NH(2)(CH(2))(2)NH(2)(CH(2))(2)NH(3)][RhCl(6)]Cl, were obtained from the corresponding amine and rhodium trichloride in hydro-chloric acid solution by slow crystallization under diffusion-controlled conditions at room temperature. Its solid-state structure is defined by a three-dimensional framework of numerous electrostatic-supported N-H⋯Cl hydrogen bonds between the ionic components of the compound. Within this framework, layered arrangements of the complex ions on one hand and of the protonated amines and chloride ions on the other hand, can be recognized. The octahedral hexa-chloridorhodate(III) anion resides on a symmetry site, while the triethyl-enetetra-mmonium cation and the chloride ion both reside on twofold axes.
| S-EPMC2915170 | biostudies-literature
Project description:We have fabricated organic-inorganic hybrid perovskite solar cell that uses a Ti/Au multilayer as cathode and does not use electron transport materials, and achieved the highest power conversion efficiency close to 13% with high reproducibility and hysteresis-free photocurrent curves. Our cell has a Schottky planar heterojunction structure (ITO/PEDOT:PSS/perovskite/Ti/Au), in which the Ti insertion layer isolate the perovskite and Au layers, thus proving good contact between the Au and perovskite and increasing the cells' shunt resistance greatly. Moreover, the Ti/Au cathode in direct contact with hybrid perovskite showed no reaction for a long-term exposure to the air, and can provide sufficient protection and avoid the perovskite and PEDOT:PSS layers contact with moisture. Hence, the Ti/Au based devices retain about 70% of their original efficiency after 300 h storage in the ambient environment.
| S-EPMC5171770 | biostudies-literature
Project description:Organic materials exhibit exceptional room temperature light emitting characteristics and enormous exciton oscillator strength, however, their low charge carrier mobility prevent their use in high-performance applications such as electrically pumped lasers. In this context, ultralow threshold polariton lasers, whose operation relies on Bose-Einstein condensation of polaritons - part-light part-matter quasiparticles, are highly advantageous since the requirement for high carrier injection no longer holds. Polariton lasers have been successfully implemented using inorganic materials owing to their excellent electrical properties, however, in most cases their relatively small exciton binding energies limit their operation temperature. It has been suggested that combining organic and inorganic semiconductors in a hybrid microcavity, exploiting resonant interactions between these materials would permit to dramatically enhance optical nonlinearities and operation temperature. Here, we obtain cavity mediated hybridization of GaAs and J-aggregate excitons in the strong coupling regime under electrical injection of carriers as well as polariton lasing up to 200 K under non-resonant optical pumping. Our demonstration paves the way towards realization of hybrid organic-inorganic microcavities which utilise the organic component for sustaining high temperature polariton condensation and efficient electrical injection through inorganic structure.
| S-EPMC5595872 | biostudies-literature
Project description:In this study, we propose tunable pH sensors based on the electric-double-layer transistor (EDLT) with time-dependent sensitivity characteristics. The EDLT is able to modulate the drain current by using the mobile ions inside the electrolytic gate dielectric. This property allows the implementation of a device with sensitivity characteristics that are simply adjusted according to the measurement time. An extended gate-type, ion-sensitive, field-effect transistor consisting of a chitosan/Ta2O5 hybrid dielectric EDLT transducer, and an SnO2 sensing membrane, were fabricated to evaluate the sensing behavior at different buffer pH levels. As a result, we were able to achieve tunable sensitivity by only adjusting the measurement time by using a single EDLT and without additional gate electrodes. In addition, to demonstrate the unique sensing behavior of the time-dependent tunable pH sensors based on organic–inorganic hybrid EDLT, comparative sensors consisting of a normal FET with a SiO2 gate dielectric were prepared. It was found that the proposed pH sensors exhibit repeatable and stable sensing operations with drain current deviations <1%. Therefore, pH sensors using a chitosan electrolytic EDLT are suitable for biosensor platforms, possessing tunable sensitivity and high-reliability characteristics.
| S-EPMC9503050 | biostudies-literature
Project description:A heteroatom (nitrogen and phosphorus) enriched pyridinic bridged inorganic-organic hybrid material (HPHM) was synthesized by polycondensing phosphonitrilic chloride trimer (PNC) and 2,6-diaminopyridine in DMSO at 140 °C. The synthesized material was used as an efficient electrode material for the electrochemical detection of selenium(iv) ions [Se(iv)] in aqueous solution. The HPHM electrode (active mass loading of 4.1 mg cm-2) achieves a detection range of 5-50 ppb at a deposition potential of -1.2 V and a deposition time of 170 s with a lower limit of detection (LOD) of 2.18 ppb. This LOD is significantly below the World Health Organization's (WHO) recommended maximum level for selenium in drinking water. Moreover, the electrode material maintains high selectivity for Se(iv) ions in the presence of various interfering ions and high sensitivity over 200 cycles with only a minimal (∼6.83%) decline in current density response. The higher Se(iv) ion detection capability is attributed to the strategic incorporation of nitrogen and phosphorus heteroatoms, enhancing the material's electrochemical properties.
| S-EPMC11915132 | biostudies-literature
Project description:Polaritons are quasi-particles composed of a superposition of excitons and photons that can be created within a strongly coupled optical microcavity. Here, we describe a structure in which a strongly coupled microcavity containing an organic semiconductor is coupled to a second microcavity containing a series of weakly coupled inorganic quantum wells. We show that optical hybridisation occurs between the optical modes of the two cavities, creating a delocalised polaritonic state. By electrically injecting electron-hole pairs into the inorganic quantum-well system, we are able to transfer energy between the cavities and populate organic-exciton polaritons. Our approach represents a new strategy to create highly efficient devices for emerging 'polaritonic' technologies.
| S-EPMC6804868 | biostudies-literature