Project description:We have designed and synthesized electron-rich calixarene derivatives, which undergo reversible electrochemical oxidation in a well-accessible potential range that allows the ready preparation and isolation of the corresponding cation radicals. Preparation of mono- or tetra-radical cation can be achieved by using stable aromatic cation-radical salts such as MA+•, MB+•, and NAP+• as selective organic oxidants. The cation radicals of calixarenes are stable indefinitely at ambient temperatures and can be readily characterized by UV-vis-NIR spectroscopy. These cation radicals bind a single molecule of nitric oxide within its cavity with remarkable efficiency.
Project description:The elucidation of the complexation of lapachol and its derivatives to Fe2+ cation has been done using the density functional theory (DFT). This complexation has been limited to bidentate and tridentate to Fe2+ cation. Geometry optimizations have been implemented in gas and solution phase (water, acetonitrile, chlorobenzene, benzene, and toluene) for ligands at B3LYP/6-311++G (d,p) level of theory using B3LYP/6-31+G(d,p) optimized data as starting point. But, the geometrical optimizations in solution phase of the 22 complexes analyzed of lapachol and its derivatives to Fe2+ cation were restricted to acetonitrile and benzene. The complexation energy and the metal ion affinity (MIA) have also been calculated using the B3LYP method. The results obtained indicated a proportionality between the MIA values and the retained charge on Fe2+ cation for k 2-(O1,O2) modes. But, an inverse proportionality has been yielded between these two parameters for k 3-(O2, C=C) tridentate modes. For k3-(O3,C=C) tridentate mode coordination, the higher stability has been obtained. In this latter tridentate coordination in gas phase, the topological analysis of complexes exhibits the fact that the electron density is concentrated between the O3 oxygen atom of the ligand attached to Fe2+ and this metal cation. Moreover, the hydrogen bond strength calculated for isolated ligands (situated between 23.92 and 30.15 kJ/mol) is in the range of normal HBs. Collectively, all the complexation processes have shown to be highly exothermic. Our results have also shown that the electron extraction from Fe 2+ ...La i complexes is more difficult compared to that from free ligands.
Project description:Tumor necrosis factor receptor-associated factors (TRAFs) are a protein family with a wide variety of roles and binding partners. Among them, TRAF6, a ubiquitin ligase, possesses unique receptor binding specificity and shows diverse functions in immune system regulation, cellular signaling, central nervous system, and tumor formation. TRAF6 consists of an N-terminal Really Interesting New Gene (RING) domain, multiple zinc fingers, and a C-terminal TRAF domain. TRAF6 is an important therapeutic target for various disorders and structural studies of this protein are crucial for the development of next-generation therapeutics. Here, we presented a TRAF6 N-terminal structure determined at the Turkish light source "Turkish DeLight" to be 3.2 Å resolution at cryogenic temperature (PDB ID: 8HZ2). This structure offers insight into the domain organization and zinc-binding, which are critical for protein function. Since the RING domain and the zinc fingers are key targets for TRAF6 therapeutics, structural insights are crucial for future research. Separately, we rationally designed numerous new compounds and performed molecular docking studies using this template (PDB ID:8HZ2). According to the results, 10 new compounds formed key interactions with essential residues and zinc ion in the N-terminal region of TRAF6. Molecular dynamic (MD) simulations were performed for 300 ns to evaluate the stability of three docked complexes (compounds 256, 322, and 489). Compounds 256 and 489 was found to possess favorable bindings with TRAF6. These new compounds also showed moderate to good pharmacokinetic profiles, making them potential future drug candidates as TRAF6 inhibitors.
Project description:The bottom-up design and synthesis of organic molecular species with tailored photophysical properties stands as an important challenge to both computational and experimental chemical science. Overcoming this challenge presents the potential to usher in new tools and approaches to improve our ability to develop new technologies, such as molecular sensors and attuned molecular switches. Here, we report the bottom-up design and characterisation of new fluorescent maleimide derivatives using coupled computational and experimental insights. Using an extensive set of experimentally-measured UV/visible spectra for different functionalized maleimides in different solvents, we train an artificial neural network (ANN) to rapidly correlate maleimide structure (and solvent) with emission spectra characteristics. We subsequently use this computational predictor to identify design principles for novel functionalised maleimide structures with targeted photophysical properties; synthesis and characterisation of several new maleimides demonstrates how this combined strategy can offer new directions for tuning photochemistry, for example opening new routes to designing tailor-made fluorescent probes.
Project description:A new series of azomethine-functionalized compounds was synthesized from the condensation of 2-hydroxy-1,3-propanediamine and 2-thienylcarboxaldehydes in the presence of a drying agent. The derivatives were spectroscopically characterized by NMR, LC-MS, UV/Vis, IR and elemental analysis. Variable temperature 1 H-NMR (-60 to +60 °C) was performed to investigate the effect of solvent polarity; the capability of solvent to form H-bond was found to dramatically influencing the tautomerization process of the desired structures. The calculated thermochemical parameters (ΔH298 , ΔG298 and ΔS298 ) at DFT and MP2 levels of theory explained that 3 b exists in equilibrium with two tautomers. The basis of the electronic absorptions was pursued through Time-Dependent Density-Functional Theory (TD-DFT). Analysis of the structural surfaces was inspected and the molecular electrostatic potential (MEP) demonstrated that the three functionalized compounds were relatively analogous in the electronic distributions. Furthermore, the electrophilic and nucleophilic centers lying on the molecular surfaces were probably playing a key-role in stabilizing the compounds through the nonclassical C-H⋅⋅⋅π interactions and hydrogen bonding. The impact of solvent polarity on absorption spectra were investigated via solvatochromic shifts. For instance, compound 3 c displayed a gradual shift of the maximum absorption to the red area when the solvent polarity was increased, recording a 21 nm of bathochromic shift. In contrast, no significant solvent-effect on 3 a and 3 b was observed. The solvation relation was pursued between Gutmann's donicity numbers the experimental λmax ; exhibited almost positive linear performance with a minor oscillation, that ascribe to the possible weak interface between the molecules of solute and designated solvents. The bandgap energy of all products were assessed experimentally using optical absorption spectra following Tauc approach, giving -4.050 (3 a), -3.900 (3 b) and -3.210 (3 c) eV. However, the ΔE were computationally figured out from TD-DFT simulation to be -4.258 (3 a), -4.022 (3 b) and -3.390 (3 c) eV.
Project description:This study reports the synthesis and characterization of a novel class of flavonoid acetamide derivatives (FA) of quercetin, apigenin, fisetin, kaempferol, and luteolin. Flavonoids display numerous biological properties but are limited by aqueous insolubility, enzymatic degradation, instability, and low bioavailability. FAs were synthesized, with 80-82% yields, through the sequential modification of the flavonoid hydroxyl groups into the acetamide moieties. Bioavailability, antioxidant, and ADMET are structure-activity-dependent properties that vary across different classes of flavonoids and dictate the prevalent biological applications of the flavonoids. Thus, the FAs were evaluated for their bioavailability, antioxidant, and ADMET toxicity properties versus the unmodified flavonoids (UFs). In vitro bioavailability analysis shows that the UFs have bio-availabilities in the range of 10.78-19.29% against that of the FAs in the range of 20.70-34.87%. The antioxidant capacity was measured using the 2,2-diphenyl-1-picrylhydrazyl (DPPH·) assay with recorded IC50 values of 2.19-13.03 μM for the UFs. Conversely, the FAs had high DPPH IC50 values ranging from 33.83 to 67.10 μM and corresponding to lower antioxidant activity. The FAs showed favorable ADMET properties. The modification of flavonoids into FAs significantly improves the bioavailability and the ADMET toxicity properties, albeit with decreased antioxidant activity. This work highlights the effect of the global modification of the flavonoids with the acetamide groups on the bioavailability, antioxidant, and ADMET toxicity properties which are critical determinants in the biological applications of the flavonoids.
Project description:HIV-1 protease recognizes and cleaves more than 12 different substrates leading to viral maturation. While these substrates share no conserved motif, they are specifically selected for and cleaved by protease during viral life cycle. Drug resistant mutations evolve within the protease that compromise inhibitor binding but allow the continued recognition of all these substrates. While the substrate envelope defines a general shape for substrate recognition, successfully predicting the determinants of substrate binding specificity would provide additional insights into the mechanism of altered molecular recognition in resistant proteases. We designed a variant of HIV protease with altered specificity using positive computational design methods and validated the design using X-ray crystallography and enzyme biochemistry. The engineered variant, Pr3 (A28S/D30F/G48R), was designed to preferentially bind to one out of three of HIV protease's natural substrates; RT-RH over p2-NC and CA-p2. In kinetic assays, RT-RH binding specificity for Pr3 increased threefold compared to the wild-type (WT), which was further confirmed by isothermal titration calorimetry. Crystal structures of WT protease and the designed variant in complex with RT-RH, CA-p2, and p2-NC were determined. Structural analysis of the designed complexes revealed that one of the engineered substitutions (G48R) potentially stabilized heterogeneous flap conformations, thereby facilitating alternate modes of substrate binding. Our results demonstrate that while substrate specificity could be engineered in HIV protease, the structural pliability of protease restricted the propagation of interactions as predicted. These results offer new insights into the plasticity and structural determinants of substrate binding specificity of the HIV-1 protease.
Project description:We report the synthesis and biological assessment of 1,3,4-oxadiazole substituted 24 derivatives as novel, potential antibacterial agents. The structures of the newly synthesized derivatives were established by the combined practice of UV, IR, (1)H NMR, (13)C NMR, and mass spectrometry. Further these synthesized derivatives were subjected to antibacterial activity against all the selected microbial strains in comparison with amoxicillin and cefixime. The antibacterial activity of synthesized derivatives was correlated with their physicochemical and structural properties by QSAR analysis using computer assisted multiple regression analysis and four sound predictive models were generated with good R(2), R(adj)(2), and Fischer statistic. The derivatives with potent antibacterial activity were subjected to molecular docking studies to investigate the interactions between the active derivatives and amino acid residues existing in the active site of peptide deformylase to assess their antibacterial potential as peptide deformylase inhibitor.
Project description:Agrin is a key heparan sulfate proteoglycan involved in the development and maintenance of synaptic junctions between nerves and muscles. Agrin's important functions include clustering acetylcholine receptors on the postsynaptic membranes of muscles and binding to the muscle protein alpha-dystroglycan through its glycan chains. ITC and NMR were used to study the interactions of the C-terminal domain, agrin-G3, with carbohydrates implicated in agrin's functions. Sialic acid caps the glycan chains of alpha-dystroglycan and occurs as a posttranslational modification on the muscle-specific kinase component of the agrin receptor. We found that agrin-G3 binds sialic acid in a Ca2+-dependent manner. ITC data indicate that binding is exothermic and occurs with a 1:1 stoichiometry. NMR chemical shift changes map the sialic acid binding site to the loops that control the domain's acetylcholine receptor clustering activity. By contrast, the glycosaminoglycans heparin and heparan sulfate bind independently of Ca2+. Binding is endothermic, and the binding site spans about 12 saccharide units. The binding site for heparin occupies a similar location but is distinct from that for sialic acid. NMR translational diffusion experiments show that agrin-G3 binds heparin with a 2:1 stoichiometry. Comparisons between the muscle (B0) and neuronal (B8) isoforms of the agrin domain showed very similar Ca2+ and carbohydrate binding properties. Our work identifies agrin-G3 as a functional analogue of the concanavalin A-type lectins, highlights functional similarities between agrin and laminin G domains, and provides mechanistic clues about the roles of carbohydrates in agrin's functions.
Project description:Viruses remain a global threat to animals, plants, and humans. The type 1 human immunodeficiency virus (HIV-1) is a member of the retrovirus family and carries an RNA genome, which is reverse transcribed into viral DNA and further integrated into the host-cell DNA for viral replication and proliferation. The RNA structures from the HIV-1 genome provide valuable insights into the mechanisms underlying the viral replication cycle. Moreover, these structures serve as models for designing novel therapeutic approaches. Here, we review structural data on RNA from the HIV-1 genome as well as computational studies based on these structural data. The review is organized according to the type of structured RNA element which contributes to different steps in the viral replication cycle. This is followed by an overview of the HIV-1 transactivation response element (TAR) RNA as a model system for understanding dynamics and interactions in the viral RNA systems. The review concludes with a description of computational studies, highlighting the impact of biomolecular simulations in elucidating the mechanistic details of various steps in the HIV-1's replication cycle.