Ultra-broadband near-perfect metamaterial absorber for photovoltaic applications† † Electronic supplementary information (ESI) available: Multimedia files for supporting content. See DOI: https://doi.org/10.1039/d3na00565h
Ontology highlight
ABSTRACT:
SUBMITTER: Nakti P
PROVIDER: S-EPMC10696953 | biostudies-literature | 2023 Oct
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Metamaterial (MM) perfect absorbers are realised over various spectra from visible to microwave. Recently, different approaches have been explored to integrate tunability into MM absorbers. Particularly, tuning has been illustrated through electrical-, thermal-, and photo-induced changes to the permittivity of the active medium within MM absorbers. However, the intricate design, expensive nanofabrication process, and the volatile nature of the active medium limit the widespread applications of MM absorbers. Metal-dielectric stack layered hyperbolic metamaterials (HMMs) have recently attracted much attention due to their extraordinary optical properties and rather simple design. Herein, we experimentally realised a reconfigurable HMM perfect absorber based on alternating gold (Au) and Ge2Sb2Te5 (GST225) layers for the near-infrared (N-IR) region. It shows that a red-shift of 500 nm of the absorptance peak can be obtained by changing the GST225 state from amorphous to crystalline. The nearly perfect absorptance is omnidirectional and polarisation-independent. Additionally, the absorptance peak can be reversibly switched in just five nanoseconds by re-amorphising the GST225, enabling a dynamically reconfigurable HMM absorber. Experimental data are validated numerically using the finite-difference time-domain method. The absorber fabricated using our strategy has advantages of being reconfigurable, uncomplicated, and lithography-free over conventional MM absorbers, which may open up a new path for applications in energy harvesting, photodetectors, biochemical sensing, and thermal camouflage techniques.
| S-EPMC9417818 | biostudies-literature
Project description:We report a multi-resonant terahertz (THz) metamaterial perfect absorber (MPA)-based biosensor in the working frequency range of [Formula: see text] for sensing of microorganisms (such as fungi, yeast) and wheat pesticides. Nearly [Formula: see text] absorption is realized at [Formula: see text] and [Formula: see text]. We designed our THz MPA sensor making resonators' gap area compatible with the microorganisms' size. To obtain optimum performance of the MPA, a mapping of amplitudes and shifts in the absorption resonance peaks with different structural parameters of the resonators is carried out. A very high-frequency shift is obtained for microorganisms such as Penicillium chrysogenum (fungi), yeast, and pesticides (Imidacloprid, N, N-Diethyldithiocarbamate sodium salt trihydrate, Daminozide, N, N-Diethyldithiocarbamate sodium salt hydrate, and Dicofol). An equivalent circuit model using Advance Design System (ADS) software is developed. The calculated results through the model show similar trends as obtained in the simulations using CST. Investigations of the effect of incidence angle of THz wave on the absorption spectra of the MPA are also carried out. It is found that incidence angle does not impact the stability of the lower resonance absorption peak (1.79THz). Due to the wide working frequency range, the proposed sensor is extremely suitable for the detection of all range of pesticides because their specific absorption fingerprint lies in the frequency range of 0-3.8THz. We believe that our sensor could be a potential detection tool for detecting pesticide residues in agriculture and food products. The THz MPA-based biosensor is capable of detecting a very small change in the effective dielectric constant of the MPA environment. Therefore, it can also offer huge opportunities in label-free biosensing for future biomedical applications.
| S-EPMC10640598 | biostudies-literature
Project description:Metamaterial absorbers over a broadband spectrum with high absorption, good angular tolerance, and easy configurations have essential importance for optical and optoelectronic devices. In this study, a hybrid metamaterial absorber comprising multilayered cermet thin films (multi-cermet) with tapered structure is designed and experimentally demonstrated. Combining optical interference of multi-cermet films and optical field localization of nano-cone structures, the average absorbance of both simulation and measurement are more than 98% in an ultrabroad bandwidth (300-3000 nm), and the proposed absorber shows a good angular tolerance as well. The composite process of two easy-operated and efficient methods, colloidal lithography, and magnetron sputtering, is employed for large-area fabrication. In addition, owing to flexible polyimide substrate, the proposed absorber also shows good bending and heating resistance, which reflects its potential in engineering application.
| S-EPMC11502049 | biostudies-literature
Project description:We report a broadband polarization-independent perfect absorber with wide-angle near unity absorbance in the visible regime. Our structure is composed of an array of thin Au squares separated from a continuous Au film by a phase change material (Ge2Sb2Te5) layer. It shows that the near perfect absorbance is flat and broad over a wide-angle incidence up to 80° for either transverse electric or magnetic polarization due to a high imaginary part of the dielectric permittivity of Ge2Sb2Te5. The electric field, magnetic field and current distributions in the absorber are investigated to explain the physical origin of the absorbance. Moreover, we carried out numerical simulations to investigate the temporal variation of temperature in the Ge2Sb2Te5 layer and to show that the temperature of amorphous Ge2Sb2Te5 can be raised from room temperature to > 433 K (amorphous-to-crystalline phase transition temperature) in just 0.37 ns with a low light intensity of 95 nW/μm(2), owing to the enhanced broadband light absorbance through strong plasmonic resonances in the absorber. The proposed phase-change metamaterial provides a simple way to realize a broadband perfect absorber in the visible and near-infrared (NIR) regions and is important for a number of applications including thermally controlled photonic devices, solar energy conversion and optical data storage.
| S-EPMC3912474 | biostudies-other
Project description:We propose a dual-band metamaterial perfect absorber with a metal-insulator-metal structure (MIM) for use in infrared (IR) stealth technology. We designed the MIM structure to have surface plasmon polariton (SPP) and magnetic polariton (MP) resonance peaks at 1.54 μm and 6.2 μm, respectively. One peak suppresses the scattering signals used by laser-guided missiles, and the other matches the atmospheric absorption band, thereby enabling the suppression of long-wavelength IR (LWIR) and mid-wavelength IR (MWIR) signals from objects as they propagate through the air. We analysed the spectral properties of the resonance peaks by comparing the wavelength of the MP peak calculated using the finite-difference time-domain method with that obtained by utilizing an inductor-capacitor circuit model. We evaluated the dependence of the performance of the dual-band metamaterial perfect absorber on the incident angle of light at the surface. The proposed absorber was able to reduce the scattering of 1.54 μm IR laser light by more than 90% and suppress the MWIR and LWIR signatures by more than 92%, as well as maintain MWIR and LWIR signal reduction rates greater than 90% across a wide temperature range from room temperature to 500 °C.
| S-EPMC5532238 | biostudies-literature
Project description:An efficient resolution for ultrathin metamaterial perfect absorber (MPA) is proposed and demonstrated in the VHF radio band (30-300 MHz). By adjusting the lumped capacitors and the through vertical interconnects, the absorber is miniaturized to be only λ/816 and λ/84 for its thickness and periodicity with respect to the operating wavelength (at 102 MHz), respectively. The detailed simulation and calculation show that the MPA can maintain an absorption rate over 90% in a certain range of incident angle and with a wide variation of capacitance. Additionally, we utilized the advantages of the initial single-band structure to realize a nearly perfect dual-band absorber in the same range. The results were confirmed by both simulation and experiment at oblique incidence angles up to 50°. Our work is expected to contribute to the actualization of future metamaterial-based devices working at radio frequency.
| S-EPMC5361105 | biostudies-literature
Project description:Perfect absorbers (PAs) at near infrared allow various applications such as biosensors, nonlinear optics, color filters, thermal emitters and so on. These PAs, enabled by plasmonic resonance, are typically powerful and compact, but confront inherent challenges of narrow bandwidth, polarization dependence, and limited incident angles as well as requires using expensive lithographic process, which limit their practical applications and mass production. In this work, we demonstrate a non-resonant PA that is comprised of six continuous layers of magnesium fluoride (MgF2) and chromium (Cr) in turns. Our device absorbs more than 90% of light in a broad range of 900-1900 nm. In addition, such a planar design is lithography-free, certainly independent with polarization, and presents a further advantage of wide incidence up to 70°. The measured performance of our optimized PA agrees well with analytical calculations of transfer matrix method (TMM) and numerical simulations of finite element method, and can be readily implemented for practical applications.
| S-EPMC7933432 | biostudies-literature
Project description:A hybrid acoustic metamaterial is proposed as a new class of sound absorber, which exhibits superior broadband low-frequency sound absorption as well as excellent mechanical stiffness/strength. Based on the honeycomb-corrugation hybrid core (H-C hybrid core), we introduce perforations on both top facesheet and corrugation, forming perforated honeycomb-corrugation hybrid (PHCH) to gain super broadband low-frequency sound absorption. Applying the theory of micro-perforated panel (MPP), we establish a theoretical method to calculate the sound absorption coefficient of this new kind of metamaterial. Perfect sound absorption is found at just a few hundreds hertz with two-octave 0.5 absorption bandwidth. To verify this model, a finite element model is developed to calculate the absorption coefficient and analyze the viscous-thermal energy dissipation. It is found that viscous energy dissipation at perforation regions dominates the total energy consumed. This new kind of acoustic metamaterials show promising engineering applications, which can serve as multiple functional materials with extraordinary low-frequency sound absorption, excellent stiffness/strength and impact energy absorption.
| S-EPMC5327422 | biostudies-literature
Project description:Plasmonic metamaterial absorbers are particularly important in different applications such as photodetectors, microbolometers and solar cells. In this paper, we propose a tungsten boride (WB, a refractory ceramic) based broadband metamaterial absorber whose optical properties is numerically analyzed and experimentally characterized. We have also analyzed the damage characteristics of this absorber using a femtosecond laser and compared with an ordinary Au metamaterial absorber. We observe that WB has almost the double absorption bandwidth with absorption more than 90% over the spectral range of 950 to 1400 nm when compared with the Au counterpart. Furthermore, we show that Au metamaterial is damaged at the power of around 36.4 mW whereas WB metamaterial is not damaged at that power (WB has high Tammann temperature than Au)-however the atom of WB material was knocked off by the bombardment of a femtosecond laser.
| S-EPMC6828741 | biostudies-literature
Project description:In this work, an ultrathin acoustic metamaterial formed by space-coiled water channels with a rubber coating is proposed for underwater sound absorption. The proposed metamaterial achieves perfect sound absorption ([Formula: see text] > 0.99) at 181 Hz, which has a deep subwavelength thickness ([Formula: see text]). The theoretical prediction is consistent with the numerical simulation, which demonstrate the broadband low-frequency sound absorption performance of the proposed super absorber. The introduction of rubber coating leads to a significant decrease of the effective sound speed in the water channel, resulting in the phenomenon of slow-sound propagation. From the perspective of numerical simulations and acoustic impedance analysis, it is proved that the rubber coating on the channel boundary causes slow-sound propagation with inherent dissipation, which is the key to meet the impedance matching condition and achieve perfect low-frequency sound absorption. Parametric studies are also carried out to investigate the effect of specific structural and material parameters on sound absorption. By tailoring key geometric parameters, an ultra-broadband underwater sound absorber is constructed, with a perfect absorption range of 365-900 Hz and a deep subwavelength thickness of 33 mm. This work paves a new way for designing underwater acoustic metamaterials and controlling underwater acoustic waves.
| S-EPMC10192347 | biostudies-literature