Microbial and potentially toxic elements risk assessment in high Andean river water based on Monte Carlo simulation, Peru.
Ontology highlight
ABSTRACT:
SUBMITTER: Custodio M
PROVIDER: S-EPMC10697974 | biostudies-literature | 2023 Dec
REPOSITORIES: biostudies-literature
Publications
Microbial and potentially toxic elements risk assessment in high Andean river water based on Monte Carlo simulation, Peru.
Custodio María M Peñaloza Richard R Ochoa Salomé S De la Cruz Heidi H Rodríguez Ciro C Cuadrado Walter W
Scientific reports 20231206 1
The study evaluated microbial and Potentially Toxic Elements-PTEs risks in high Andean river water in Peru using Monte Carlo simulation. A total of 144 water samples were collected from four rivers and evaluated for physicochemical parameters, PTEs and bacterial pathogens. The microbial risk analysis for exposure to pathogens present in the water was based on the probability of occurrence of diseases associated with Escherichia coli, Pseudomonas aeruginosa and enterococci. PTEs risk analysis was ...[more]
Similar Datasets
Project description:This research evaluates the environmental and health risks linked to potentially toxic elements (PTEs) and PAHs along the western coast of the Gulf of Suez, Egypt. This study investigated the concentration of 16 PAH compounds in the Suez Gulf, revealing significantly higher levels than the EU (0.20 µg/L) and US (0.030 µg/L) standards. The average total PAH concentration across eight locations was significantly higher, with the Suez area having the highest concentration at 479 µg/L. Pyrene (Pyr) was the dominant PAH with a concentration of 443 µg/L in Suez, while acenaphthylene (Ace) had the lowest concentration at 0.120 µg/L in Northern Zaafarana. Carcinogenic PAHs (CAR) ranged from 8.67 µg/L at Ras Gharib to 29.62 µg/L at Suez, highlighting the urgent need for regulatory measures. Confirmatory ratios pointed to industrial and shipping influences as petrogenic sources. Elevated total organic carbon (TOC) levels in Suez Bay indicated aggravated organic pollution, exacerbated by oil rigs and refineries. The ecological risk assessment highlighted substantial risks, particularly in Suez, necessitating immediate interventions to combat PAH contamination and preserve the environmental balance of the Red Sea. The dominant metals in water samples were arranged in descending order as follows: Pb > Fe > Cr > Cu > Zn > Mn > Cd > Ni. The study evaluated environmental and human health risks using a multifaceted approach, including cluster analysis, principal component analysis, and various indices (HPI, RI, MI, HQ, HI, and CR). Most water samples exhibited high pollution risks, surpassing permissible limits for HPI (> 100) and MI (> 6). Notably, HI oral values indicated significant non-carcinogenic risks for adults and children. While HI values for adults suggested low-risk dermal contact, those for children showed a substantial proportion in the high-risk category. Most water samples displayed CR values exceeding 1 × 10-4 for Cd, Cr, and Pb, indicating vulnerability to carcinogenic effects in both age groups. Monte Carlo simulations reinforced these findings, revealing a significant carcinogenic impact on children and adults. The identified clusters, reflective of industrial, petroleum-related, and urban runoff contamination sources, were consistently validated and clarified through PCA, enhancing the reliability of the findings. In light of these results, urgent and comprehensive water treatment measures are imperative to mitigate carcinogenic and non-carcinogenic health risks. These insights provide a foundation for implementing targeted management strategies to effectively address the challenges of heavy metal contamination in the Red Sea.
| S-EPMC11790872 | biostudies-literature
Project description:In coastal rivers with various human and damming activities (reservoir), the cycle and biogeochemistry of environmental pollutants in river systems has been modified. A total of 42 suspended particulate matter (SPM) samples were obtained in Jiulongjiang River, southeast China to investigate the concentration, sources, behavior, and risks of nine potentially toxic elements (PTEs) in SPM. The results of metals concentration showed relatively large variation, major for Mn and minor for Co; Mn > Zn > V > Pb > Cr > Ni > Cu > Cd > Co. Multi-index evaluation reflected that most of the PTEs are minor enrichment/moderately polluted. The Cd is defined as extremely severe enrichment/polluted level, and the Pb and Zn as minor enrichment/moderately polluted levels. Among the selected PTEs, Cd and Zn are identified as the main toxic factors of SPM with a contribution of 57 ± 18% and 14 ± 7% to the total toxic risk. The sources identification suggested that human inputs may be the primary potential source of Cd, Zn, Pb, and Co, whereas natural sources (e.g., rock weathering) are likely to be responsible for Cu, Cr, V, and Ni. In contrast, the data suggested that Mn may be attributed to both natural and anthropogenic inputs. The PTEs among dissolved, suspended, and sediment phases reflected the transportation behavior and different potential risk levels. Overall, the PTE geochemistry of river SPM can act as a good indicator of the driving mechanism of PTEs' accumulation and provide a powerful support for controlling riverine PTEs-related pollution in coastal regions.
| S-EPMC8999047 | biostudies-literature
Project description:BackgroundMonte Carlo simulation is considered as the most accurate method for dose calculation in radiotherapy. PRIMO is a Monte-Carlo program with a user-friendly graphical interface.Material and methodA VitalBeam with 6MV and 6MV flattening filter free (FFF), equipped with the 120 Millennium multileaf collimator was simulated by PRIMO. We adjusted initial energy, energy full width at half maximum (FWHM), focal spot FWHM, and beam divergence to match the measurements. The water tank and ion-chamber were used in the measurement. Percentage depth dose (PDD) and off axis ratio (OAR) were evaluated with gamma passing rates (GPRs) implemented in PRIMO. PDDs were matched at different widths of standard square fields. OARs were matched at five depths. Transmission factor and dose leaf gap (DLG) were simulated. DLG was measured by electronic portal imaging device using a sweeping gap method.ResultFor the criterion of 2%/2 mm, 1%/2 mm and 1%/1 mm, the GPRs of 6MV PDD were 99.33-100%, 99-100%, and 99-100%, respectively; the GPRs of 6MV FFF PDD were 99.33-100%, 98.99-99.66%, and 97.64-98.99%, respectively; the GPRs of 6MV OAR were 96.4-100%, 90.99-100%, and 85.12-98.62%, respectively; the GPRs of 6MV FFF OAR were 95.15-100%, 89.32-100%, and 87.02-99.74%, respectively. The calculated DLG matched well with the measurement (6MV: 1.36 mm vs. 1.41 mm; 6MV FFF: 1.07 mm vs. 1.03 mm, simulation vs measurement). The transmission factors were similar (6MV: 1.25% vs. 1.32%; 6MV FFF: 0.8% vs. 1.12%, simulation vs measurement).ConclusionThe calculated PDD, OAR, DLG and transmission factor were all in good agreement with measurements. PRIMO is an independent (with respect to analytical dose calculation algorithm) and accurate Monte Carlo tool.
| S-EPMC9667592 | biostudies-literature
Project description:The Yongjiang river is a large, shallow, hyper-trophic, freshwater river in Guangxi, China. To investigate the presence of microcystin-RR, microcystin-LR, and microcystin-YR (MC-RR, MC-LR, and MC-YR) in the Yongjiang river and describe their correlation with environmental factors, as well as, assess health risk using Monte Carlo simulation, 90 water samples were collected at three sample points from March to December 2017. Results showed that during the monitoring period, total concentrations of MC-RR (TMC-RR), MC-YR (TMC-YR), and MC-LR (TMC-LR) varied from 0.0224 to 0.3783 μg/L, 0.0329 to 0.1433 μg/L, and 0.0341 to 0.2663 μg/L, respectively. Total phosphorus (TP) content appeared to be related to TMC-LR and the total concentrations of microcystins (TMCs), while pH and total nitrogen (TN)/TP ratio appeared to be related to TMC-RR and TMC-YR, respectively. Using the professional health risk assessment software @Risk7.5, the risks of dietary intake of microcystins (MCs), including the carcinogenic risk and non-carcinogenic risk, were evaluated. It was found that the carcinogenic risk of MC-RR from drinking water was higher than MC-LR and MC-YR, and the presence of MCs would lead to high potential health risks, especially in children. The carcinogenic risk of MC-RR to children was >1 × 10-4, the maximum allowance level recommended by the US Environmental Protection Agency; as for adults, it was >5 × 10-5, the maximum allowance level recommended by the International Commission on Radiological Protection. The non-carcinogenic hazard index (HI) of MC-RR, MC-YR, and MC-LR increased successively, indicating that MC-LR was more hazardous to human health than MC-YR and MC-RR, but its HI was <1. This suggests that MCs pose less risk to health. However, it is necessary to strengthen the protection and monitoring of drinking water source for effective control of water pollution and safeguarding of human health.
| S-EPMC6241391 | biostudies-literature
Project description:BackgroundIn the biological sciences the TCID50 (median tissue culture infective dose) assay is often used to determine the strength of a virus.MethodsWhen the so-called Spearman-Kaerber calculation is used, the ratio between the pfu (the number of plaque forming units, the effective number of virus particles) and the TCID50, theoretically approaches a simple function of Eulers constant. Further, the standard deviation of the logarithm of the TCID50 approaches a simple function of the dilution factor and the number of wells used for determining the ratios in the assay. However, these theoretical calculations assume that the dilutions of the assay are independent, and in practice this is not completely correct. The assay was simulated using Monte Carlo techniques.ResultsOur simulation studies show that the theoretical results actually hold true for practical implementations of the assay. Furthermore, the simulation studies show that the distribution of the (the log of) TCID50, although discrete in nature, has a close relationship to the normal distribution.ConclusionThe pfu is proportional to the TCID50 titre with a factor of about 0.56 when using the Spearman-Kaerber calculation method. The normal distribution can be used for statistical inferences and ANOVA on the (the log of) TCID50 values is meaningful with group sizes of 5 and above.
| S-EPMC3331834 | biostudies-literature
Project description:Conventional mammography can suffer from poor contrast between healthy and cancerous tissues due to the small difference in attenuation properties. Coherent scatter slot scan imaging is an imaging technique which provides additional information and is compatible with conventional mammography. A Monte Carlo simulation of coherent scatter slot scan imaging was performed to assess its performance and provide system optimization. Coherent scatter could be exploited using a system similar to conventional slot scan mammography system with antiscatter grids tilted at the characteristic angle of cancerous tissues. System optimization was performed across several parameters, including source voltage, tilt angle, grid distances, grid ratio, and shielding geometry. The simulated carcinomas were detectable for tumors as small as 5 mm in diameter, so coherent scatter analysis using a wide-slot setup could be promising as an enhancement for screening mammography. Employing coherent scatter information simultaneously with conventional mammography could yield a conventional high spatial resolution image with additional coherent scatter information.
| S-EPMC4999523 | biostudies-other
Project description:The comprehensive water quality index (CWQI) reflects the comprehensive pollution status of rivers through mathematical statistics of several water quality indicators. Using computational mathematical simulations, high-confidence CWQI predictions can be obtained based on limited water quality monitoring samples. At present, most of the CWQI reported in the literature are based on conventional indicators such as nitrogen and phosphorus levels, and do not include the petroleum hydrocarbons levels. This article takes a typical river in eastern China as an example, based on the 1-year monitoring at 20 sampling sets, a CWQI containing five factors, TN, NH4+-N, TP, ∑n-Alks, and ∑PAHs was established, and further predicted by a Monte-Carlo model. The predicted CWQI for each monitoring section is above 0.7, indicating that most of the monitoring sections are moderately polluted, and some sections are seriously polluted. The Spearman rank correlation coefficient analysis results show that TN, ∑PAHs, and ∑n-Alks are the main factors influencing the water quality, especially the petroleum hydrocarbons have a significant impact on the middle and lower reaches due to shipping. In the future, more attention should be paid to petroleum hydrocarbon organic pollutants in the water quality evaluation of similar rivers.
| S-EPMC9203578 | biostudies-literature
Project description:Traditional multiple-group confirmatory factor analysis (multiple-group CFA) is usually criticized for having too restrictive model assumption, namely the scalar measurement invariance. The new multiple-group analysis methodology, alignment, has become an effective alternative. The alignment evaluates measurement invariance and more importantly, permits factor mean comparisons without requiring scalar invariance which is usually required in traditional multiple-group CFA. Some simulation studies and empirical studies have investigated the applicability of alignment under different conditions, but some areas remain unexplored. Based on the simulation studies of Asparouhov and Muthén and of Flake and McCoach, this current simulation study is broken into two sections. The first study investigates the minimal group sizes required for alignment in three-factor models. The second study compares the performance of multiple-group CFA, multiple-group exploratory structural equation model (multiple-group ESEM), and alignment by including different proportions and magnitudes of cross-loadings in the models. Study 1 shows that when the model has no noninvariant parameters, the alignment requires relatively lower group sizes. Explicitly, the minimal group size required for alignment was 250 when the amount of groups was three, the minimal group size was 150 when the amount of groups was nine, and 200 when the amount of groups was 15. When there are noninvariant parameters in the model and the amount of groups is low, a group size of 350 is a safe rule of thumb. When there are noninvariant parameters in the model and the amount of groups is high, a group size of 250 is required for trustworthy results. The magnitude of noninvariance and the noninvariance rate do not affect the minimal group size required for alignment. Study 2 shows that multiple-group CFA provides accurate factor mean estimates when each factor had 20% factor loading (1 factor loading) with small-sized cross-loading. Multiple-group ESEM provides accurate factor mean estimates when the magnitude of cross-loading is small or when each factor had 20% factor loading (1 factor loading) with medium-sized cross-loading. Alignment provides accurate factor mean estimates when there are only small-sized cross-loadings in the model. The parameter estimates, coverage rates and ratios of average standard error to standard deviation for each methodology are not influenced by the amount of groups. Recommendations are concluded for using multiple-group CFA, multiple-group ESEM, traditional alignment and aligned ESEM (AESEM) based on the results. Multiple-group CFA is more suitable for use when scalar invariance is established. Multiple-group ESEM works best when there are small-sized or only a few medium-sized cross-loadings in the model. Traditional alignment allows for small-sized cross-loadings and a few noninvariant parameters in the model. AESEM integrates the advantages of alignment and ESEM, can provide accurate estimates when noninvariant parameters and cross-loadings both exist in the model. Compared to multiple-group CFA, multiple-group ESEM, the alignment methodology performs well in more situations.
| S-EPMC9263979 | biostudies-literature
Project description:Quantitative bias analysis can be used to empirically assess how far study estimates are from the truth (i.e., an estimate that is free of bias). These methods can be used to explore the potential impact of confounding bias, selection bias (collider stratification bias), and information bias. Quantitative bias analysis includes methods that can be used to check the robustness of study findings to multiple types of bias and methods that use simulation studies to generate data and understand the hypothetical impact of specific types of bias in a simulated data set. In this article, we review 2 strategies for quantitative bias analysis: 1) traditional probabilistic quantitative bias analysis and 2) quantitative bias analysis with generated data. An important difference between the 2 strategies relates to the type of data (real vs. generated data) used in the analysis. Monte Carlo simulations are used in both approaches, but the simulation process is used for different purposes in each. For both approaches, we outline and describe the steps required to carry out the quantitative bias analysis and also present a bias-analysis tutorial demonstrating how both approaches can be applied in the context of an analysis for selection bias. Our goal is to highlight the utility of quantitative bias analysis for practicing epidemiologists and increase the use of these methods in the epidemiologic literature.
| S-EPMC9005059 | biostudies-literature
Project description:A computational method is developed to carry out explicit solvent simulations of complex molecular systems under conditions of constant pH. In constant-pH simulations, preidentified ionizable sites are allowed to spontaneously protonate and deprotonate as a function of time in response to the environment and the imposed pH. The method, based on a hybrid scheme originally proposed by H. A. Stern (J. Chem. Phys. 2007, 126, 164112), consists of carrying out short nonequilibrium molecular dynamics (neMD) switching trajectories to generate physically plausible configurations with changed protonation states that are subsequently accepted or rejected according to a Metropolis Monte Carlo (MC) criterion. To ensure microscopic detailed balance arising from such nonequilibrium switches, the atomic momenta are altered according to the symmetric two-ends momentum reversal prescription. To achieve higher efficiency, the original neMD-MC scheme is separated into two steps, reducing the need for generating a large number of unproductive and costly nonequilibrium trajectories. In the first step, the protonation state of a site is randomly attributed via a Metropolis MC process on the basis of an intrinsic pKa; an attempted nonequilibrium switch is generated only if this change in protonation state is accepted. This hybrid two-step inherent pKa neMD-MC simulation method is tested with single amino acids in solution (Asp, Glu, and His) and then applied to turkey ovomucoid third domain and hen egg-white lysozyme. Because of the simple linear increase in the computational cost relative to the number of titratable sites, the present method is naturally able to treat extremely large systems.
| S-EPMC4535364 | biostudies-literature