Hierarchically Structured Nb2O5 Microflowers with Enhanced Capacity and Fast-Charging Capability for Flexible Planar Sodium Ion Micro-Supercapacitors.
Ontology highlight
ABSTRACT:
SUBMITTER: Ma J
PROVIDER: S-EPMC10766898 | biostudies-literature | 2024 Jan
REPOSITORIES: biostudies-literature
Publications
Hierarchically Structured Nb<sub>2</sub>O<sub>5</sub> Microflowers with Enhanced Capacity and Fast-Charging Capability for Flexible Planar Sodium Ion Micro-Supercapacitors.
Ma Jiaxin J Qin Jieqiong J Zheng Shuanghao S Fu Yinghua Y Chi Liping L Li Yaguang Y Dong Cong C Li Bin B Xing Feifei F Shi Haodong H Wu Zhong-Shuai ZS
Nano-micro letters 20240104 1
Similar Datasets
Project description:High-performance Li-ion batteries require materials with well-designed and controlled structures on nanometre and micrometre scales. Electrochemical properties can be enhanced by reducing crystallite size and by manipulating structure and morphology. Here we show a method for preparing hierarchically structured Li4Ti5O12 yielding nano- and microstructure well-suited for use in lithium-ion batteries. Scalable glycothermal synthesis yields well-crystallized primary 4-8 nm nanoparticles, assembled into porous secondary particles. X-ray photoelectron spectroscopy reveals presence of Ti+4 only; combined with chemical analysis showing lithium deficiency, this suggests oxygen non-stoichiometry. Electron microscopy confirms hierarchical morphology of the obtained material. Extended cycling tests in half cells demonstrates capacity of 170 mAh g-1 and no sign of capacity fading after 1,000 cycles at 50C rate (charging completed in 72 s). The particular combination of nanostructure, microstructure and non-stoichiometry for the prepared lithium titanate is believed to underlie the observed electrochemical performance of material.
| S-EPMC5458554 | biostudies-literature
Project description:Here we proposed a novel architectural design of a ternary MnO2-based electrode - a hierarchical Co3O4@Pt@MnO2 core-shell-shell structure, where the complemental features of the three key components (a well-defined Co3O4 nanowire array on the conductive Ti substrate, an ultrathin layer of small Pt nanoparticles, and a thin layer of MnO2 nanoflakes) are strategically combined into a single entity to synergize and construct a high-performance electrode for supercapacitors. Owing to the high conductivity of the well-defined Co3O4 nanowire arrays, in which the conductivity was further enhanced by a thin metal (Pt) coating layer, in combination with the large surface area provided by the small MnO2 nanoflakes, the as-fabricated Co3O4@Pt@MnO2 nanowire arrays have exhibited high specific capacitances, good rate capability, and excellent cycling stability. The architectural design demonstrated in this study provides a new approach to fabricate high-performance MnO2-based nanowire arrays for constructing next-generation supercapacitors.
| S-EPMC3797991 | biostudies-literature
Project description:High performance, flexibility, safety, and robust integration for micro-supercapacitors (MSCs) are of immense interest for the urgent demand for miniaturized, smart energy-storage devices. However, repetitive photolithography processes in the fabrication of on-chip electronic components including various photoresists, masks, and toxic etchants are often not well-suited for industrial production. Here, a cost-effective stamping strategy is developed for scalable and rapid preparation of graphene-based planar MSCs. Combining stamps with desired shapes and highly conductive graphene inks, flexible MSCs with controlled structures are prepared on arbitrary substrates without any metal current collectors, additives, and polymer binders. The interdigitated MSC exhibits high areal capacitance up to 21.7 mF cm-2 at a current of 0.5 mA and a high power density of 6 mW cm-2 at an energy density of 5 µWh cm-2. Moreover, the MSCs show outstanding cycling performance and remarkable flexibility over 10 000 charge-discharge cycles and 300 bending cycles. In addition, the capacitance and output voltage of the MSCs are easily adjustable through interconnection with well-defined arrangements. The efficient, rapid manufacturing of the graphene-based interdigital MSCs with outstanding flexibility, shape diversity, and high areal capacitance shows great potential in wearable and portable electronics.
| S-EPMC7539196 | biostudies-literature
Project description:When utilized in energy devices, the restacking tendency of MXene Ti3C2T x inhibits its electrochemical performance. Using aerosol jet printing (AJP) technology, hybrid Ti3C2T x /C nanospheres are synthesized with C nanoparticle-bonded MXene nanosheets, and the restacking of MXene nanosheets is blocked efficiently. The formation mechanism for hybrid Ti3C2T x /C nanospheres has been hypothesized, and the Ti3C2T x /C is anticipated to assemble and shape along the droplet surface in tandem with the Marangoni flow within the droplet. The planar microsupercapacitor devices generated from these hybrid spherical nanostructures with increased interlayer spacing exhibit exceptional areal capacitance performance. This concept offers a straightforward and effective method for constructing 3D-structured MXene with suppressed self-stacking for diverse high-performance micro energy storage devices.
| S-EPMC9304703 | biostudies-literature
Project description:Planar-structured perovskite solar cells (PSCs) have received tremendous attention due to their high power conversion efficiency (PCE), simple process and low-cost fabrication. A compact thin film of electron transport materials (ETMs) plays a key role in these PSCs. However, the traditional ETMs of PSCs, TiO2 nanoparticulate films, suffer from low conductivity and high trap state density. Herein, we exploited TiO2 nanospindles as a compact ETM in planar PSCs for the first time, and achieved an efficient device with a PCE of 19.1%. By optimization with Nb doping into the TiO2 nanospindles, the PCE of the PSC was further improved up to 20.8%. The carrier transfer and collection efficiency were significantly improved after Nb5+ doping, revealed by Mott-Schottky (MS) analysis, space charge limited current (SCLC), photoluminence (PL), time-resolved photoluminence (TRPL) spectra, electrochemical impedance spectra (EIS) and so forth. Moreover, the hysteresis behavior was effectively inhibited and the stability was significantly enhanced. This work may provide a new avenue towards the rational design of efficient ETMs for perovskite solar cells.
| S-EPMC9080882 | biostudies-literature
Project description:High-rate batteries will play a vital role in future energy storage systems, yet while good progress is being made in the development of high-rate lithium-ion batteries, there is less progress with post-lithium-ion chemistry. In this study, we demonstrate that pseudohexagonal Nb2O5(TT-Nb2O5) can offer a high specific capacity (179 mAh g-1 ∼ 0.3C), good lifetime, and an excellent rate performance (72 mAh g-1 at ∼15C) in potassium-ion batteries (KIBs), when it is composited with a highly conductive carbon framework; this is the first reported investigation of TT-Nb2O5 for KIBs. Specifically, multiwalled carbon nanotubes are strongly tethered to Nb2O5 via glucose-derived carbon (Nb2O5@CNT) by a one-step hydrothermal method, which results in highly conductive and porous needle-like structures. This work therefore offers a route for the scalable production of a viable KIB anode material and hence improves the feasibility of fast-charging KIBs for future applications.
| S-EPMC10080539 | biostudies-literature
Project description:Tailoring nanofibrous matrices-a material with much promise for wound healing applications-to simultaneously mitigate bacterial colonization and stimulate wound closure of infected wounds is highly desirable. To that end, a dual-releasing, multiscale system of biodegradable electrospun nanofibers coated with biocompatible micellar nanocarriers is reported. For wound healing, transforming growth factor-β1 is incorporated into polycaprolactone/collagen (PCL/Coll) nanofibers via electrospinning and the myofibroblastic differentiation of human dermal fibroblasts is locally stimulated. To prevent infection, biocompatible nanocarriers of polypeptide-based block copolymer micelles are deposited onto the surfaces of PCL/Coll nanofibers using tannic acid as a binding partner. Micelle-modified fibrous scaffolds are favorable for wound healing, not only supporting the attachment and spreading of fibroblasts comparable to those on noncoated nanofibers, but also significantly enhancing fibroblast migration. Micellar coatings can be loaded with gentamicin or clindamycin and exhibit antibacterial activity as measured by Petrifilm and zone of inhibition assays as well as time-dependent reduction of cellular counts of Staphylococcus aureus cultures. Moreover, delivery time of antibiotic dosage is tunable through the application of a novel modular approach. Altogether, this system holds great promise as an infection-mitigating, cell-stimulating, biodegradable skin graft for wound management and tissue engineering.
| S-EPMC6347427 | biostudies-literature
Project description:One-dimensional (1D) yarn or fiber-based supercapacitors that have small diameter, volume and high mechanical strength are needed due to the demands on power source for wearable electronics, micro-devices, and implantable medical devices. The composite sheath is fabricated on a commercially available CNT yarn substrate by alternating depositions of MnO2 and Ag layers. Synergistic effect of high loading level of pseudocapacitive MnO2 and reasonably improved rate-capability are achieved. In the composite sheath, the interconnected networks provide electrical contact between MnO2 aggregates and adjacent Ag layer. The conductive Ag inter layers shorten the solid-state charge diffusion length in the MnO2. Moreover, generated electrons during the charge/discharge process can be collected rapidly by the adjacent Ag layer, therefore, the great extents of MnO2 could be loaded onto the surface of CNT core fiber electrode without a significant rate-capability degradation. Due to the high MnO2 loading level, the composite sheath-core yarn supercapacitor showed excellent specific areal capacitance (322.2 mF/cm2) and according energy density (18.3 µWh/cm2).
| S-EPMC6127153 | biostudies-literature
Project description:Simple and scalable production of micro-supercapacitors (MSCs) is crucial to address the energy requirements of miniature electronics. Although significant advancements have been achieved in fabricating MSCs through solution-based printing techniques, the realization of high-performance MSCs remains a challenge. In this paper, graphene-based MSCs with a high power density were prepared through screen printing of aqueous conductive inks with appropriate rheological properties. High electrical conductivity (2.04 × 104 S∙m-1) and low equivalent series resistance (46.7 Ω) benefiting from the dense conductive network consisting of the mesoporous structure formed by graphene with carbon black dispersed as linkers, as well as the narrow finger width and interspace (200 µm) originating from the excellent printability, prompted the fully printed MSCs to deliver high capacitance (9.15 mF∙cm-2), energy density (1.30 µWh∙cm-2) and ultrahigh power density (89.9 mW∙cm-2). Notably, the resulting MSCs can effectively operate at scan rates up to 200 V∙s-1, which surpasses conventional supercapacitors by two orders of magnitude. In addition, the MSCs demonstrate excellent cycling stability (91.6% capacity retention and ~100% Coulombic efficiency after 10,000 cycles) and extraordinary mechanical properties (92.2% capacity retention after 5000 bending cycles), indicating their broad application prospects in flexible wearable/portable electronic systems.
| S-EPMC11356036 | biostudies-literature
Project description:Recently, there is a need to explore the utilization of various heterostructures using the designed nanocomposites and tuning the surfaces of electrodes for improving the electrochemical performance of supercapacitors (SC). In this work, a novel approach is successfully employed through a facile two-step synthetic route with the assistance of a microwave for only 1 min. Depending on the glass transition of a polystyrene (PS) substrate and electrochemical deposition (ECD) of electroactive Ni-Co layered double hydroxides (LDHs), a hierarchically designed flake-like morphology can be readily prepared to enhance the surface-active sites, which allows a rhombohedral Ni-Co LDHs electrode to obtain superior electrochemical properties. Further, the interactions between electrode and electrolyte during the diffusion of ions are highly simplified using multiple enhanced electroactive sites and shorter pathways for electron transfer. The unique surface architecture of the PS substrate and the synergistic effect of the bimetallic components in Ni-Co LDHs enable this substrate to obtain desired electrochemical activity in charge storage systems. The optimized MWC Co0.5Ni0.5 electrode exhibited an areal capacity of 100 µAh/cm2 at a current density of 1 mA/cm2 and a remarkable capacity retention of 91.2% over 5000 continuous charging and discharging cycles due to its remarkable synergistic effect of abundant faradaic redox reaction kinetics. The HSC device is assembled with the combination of optimized MWC Co0.5Ni0.5 and activated carbon as a positive and negative electrode, respectively. Further, the electrochemical test results demonstrated that MWC Co0.5Ni0.5 //AC HSC device showed a high areal capacitance of 531.25 mF/cm2 at a current density of 5 mA/cm2. In addition, the fabricated an aqueous HSC device showed a power density of 16 mW/cm2 at an energy density of 0.058 mWh/cm2, along with the remarkable capacity retention of 82.8% even after 10,000 continuous charging and discharging cycles. Moreover, the assembled hybrid supercapacitor (HSC) device is integrated with a triboelectric nanogenerator (TENG) for the development of energy conversion and storage systems. Not only an extensive survey of materials but also an innovative solution for recent progress can confirm the wide range of potential SC applications. Remarkably, this study is a new way of constructing self-powered energy storage systems in the field of sustainable wearable electronics and future smart sensing systems.
| S-EPMC9864052 | biostudies-literature