Dataset Information

Flow-controlled ventilation decreases mechanical power in postoperative ICU patients.

ABSTRACT:

Background

Mechanical power (MP) is the energy delivered by the ventilator to the respiratory system and combines factors related to the development of ventilator-induced lung injury (VILI). Flow-controlled ventilation (FCV) is a new ventilation mode using a constant low flow during both inspiration and expiration, which is hypothesized to lower the MP and to improve ventilation homogeneity. Data demonstrating these effects are scarce, since previous studies comparing FCV with conventional controlled ventilation modes in ICU patients suffer from important methodological concerns.

Objectives

This study aims to assess the difference in MP between FCV and pressure-controlled ventilation (PCV). Secondary aims were to explore the effect of FCV in terms of minute volume, ventilation distribution and homogeneity, and gas exchange.

Methods

This is a physiological study in post-cardiothoracic surgery patients requiring mechanical ventilation in the ICU. During PCV at baseline and 90 min of FCV, intratracheal pressure, airway flow and electrical impedance tomography (EIT) were measured continuously, and hemodynamics and venous and arterial blood gases were obtained repeatedly. Pressure-volume loops were constructed for the calculation of the MP.

Results

In 10 patients, optimized FCV versus PCV resulted in a lower MP (7.7 vs. 11.0 J/min; p = 0.004). Although FCV did not increase overall ventilation homogeneity, it did lead to an improved ventilation of the dependent lung regions. A stable gas exchange at lower minute volumes was obtained.

Conclusions

FCV resulted in a lower MP and improved ventilation of the dependent lung regions in post-cardiothoracic surgery patients on the ICU. Trial registration Clinicaltrials.gov identifier: NCT05644418. Registered 1 December 2022, retrospectively registered.

SUBMITTER: Van Oosten JP

PROVIDER: S-EPMC10951187 | biostudies-literature | 2024 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Flow-controlled ventilation decreases mechanical power in postoperative ICU patients.

Van Oosten Julien P JP Francovich Juliette E JE Somhorst Peter P van der Zee Philip P Endeman Henrik H Gommers Diederik A M P J DAMPJ Jonkman Annemijn H AH

Intensive care medicine experimental 20240319 1

<h4>Background</h4>Mechanical power (MP) is the energy delivered by the ventilator to the respiratory system and combines factors related to the development of ventilator-induced lung injury (VILI). Flow-controlled ventilation (FCV) is a new ventilation mode using a constant low flow during both inspiration and expiration, which is hypothesized to lower the MP and to improve ventilation homogeneity. Data demonstrating these effects are scarce, since previous studies comparing FCV with convention ...[more]

PMID: 38502268

Similar Datasets

Project description:BackgroundMechanical ventilation, a crucial intervention for acute respiratory distress syndrome (ARDS), can lead to ventilator-induced lung injury (VILI). This study focuses on individualizing mechanical power (MP) in mechanically ventilated patients to minimize VILI and reduce ICU mortality.MethodsA retrospective analysis was conducted using the Amsterdam University Medical Centers Database (AmsterdamUMCdb) data. The study included patients aged 18 and older who needed at least 48 hours of pressure-controlled mechanical ventilation. Patients who died or were extubated within 48 hours and those with inadequate data were excluded. Patients were categorized into hypoxemia groups based on their PaO2/FiO2 ratio. MP was calculated using a surrogate formula and normalized to ideal body weight (IBW). Statistical analyses and machine learning models, including logistic regression and random forest, were used to predict ICU mortality and establish safe upper limits for IBW-adjusted MP.ResultsOut of 23,106 admissions, 2,338 met the criteria. Nonsurvivors had a significantly higher time-weighted average MP (TWA-MP) than survivors. Safe upper limits for IBW-adjusted MP varied across hypoxemia groups. The XGBoost model showed the highest predictive accuracy for ICU mortality. An individualization method for mechanical ventilation settings, based on real-time physiological variables, demonstrated reduced predicted mortality in a subset of patients.DiscussionElevated TWA-MP is associated with increased ICU mortality, underscoring the need for personalized mechanical ventilation strategies. The study highlights the complexity of VILI and the multifactorial nature of ICU mortality. Further studies to define a safe upper limit for IBW-adjusted MP may help clinicians optimize mechanical ventilation settings and decrease the risk of VILI and mortality.ConclusionsDespite the fact that the study's retrospective design and reliance on a single-center database may limit the generalizability of findings, this study offers valuable insights into the relationship between mechanical power and ICU mortality, emphasizing the need for individualized mechanical ventilation strategies. The findings suggest a potential for more personalized, data-driven approach in managing mechanically ventilated patients, which could improve patient outcomes in critical care settings.

Project description:BackgroundMechanical power (MP) is the energy delivered to the respiratory system over time during mechanical ventilation. Our aim was to compare the currently available methods to calculate MP during volume- and pressure-controlled ventilation, comparing different equations with the geometric reference method, to understand whether the easier to use surrogate formulas were suitable for the everyday clinical practice. This would warrant a more widespread use of mechanical power to promote lung protection.MethodsForty respiratory failure patients, sedated and paralyzed for clinical reasons, were ventilated in volume-controlled ventilation, at two inspiratory flows (30 and 60 L/min), and pressure-controlled ventilation with a similar tidal volume. Mechanical power was computed both with the geometric method, as the area between the inspiratory limb of the airway pressure and the volume, and with two algebraic methods, a comprehensive and a surrogate formula.ResultsThe bias between the MP computed by the geometric method and by the comprehensive algebraic method during volume-controlled ventilation was respectively 0.053 (0.77, - 0.81) J/min and - 0.4 (0.70, - 1.50) J/min at low and high flows (r2 = 0.96 and 0.97, p < 0.01). The MP measured and computed by the two methods were highly correlated (r2 = 0.95 and 0.94, p < 0.01) with a bias of - 0.0074 (0.91, - 0.93) and - 1.0 (0.45, - 2.52) J/min at high-low flows. During pressure-controlled ventilation, the bias between the MP measured and the one calculated with the comprehensive and simplified methods was correlated (r2 = 0.81, 0.94, p < 0.01) with mean differences of - 0.001 (2.05, - 2.05) and - 0.81 (2.11, - 0.48) J/min.ConclusionsBoth for volume-controlled and pressure-controlled ventilation, the surrogate formulas approximate the reference method well enough to warrant their use in the everyday clinical practice. Given that these formulas require nothing more than the variables already displayed by the intensive care ventilator, a more widespread use of mechanical power should be encouraged to promote lung protection against ventilator-induced lung injury.

Dataset Information

Flow-controlled ventilation decreases mechanical power in postoperative ICU patients.

Background

Objectives

Methods

Results

Conclusions

Publications

Flow-controlled ventilation decreases mechanical power in postoperative ICU patients.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets