Author Correction: High voltage electrolytes for lithium-ion batteries with micro-sized silicon anodes.
Ontology highlight
ABSTRACT:
SUBMITTER: Li AM
PROVIDER: S-EPMC10966073 | biostudies-literature | 2024 Mar
REPOSITORIES: biostudies-literature
Publications
Author Correction: High voltage electrolytes for lithium-ion batteries with micro-sized silicon anodes.
Li Ai-Min AM Wang Zeyi Z Pollard Travis P TP Zhang Weiran W Tan Sha S Li Tianyu T Jayawardana Chamithri C Liou Sz-Chian SC Rao Jiancun J Lucht Brett L BL Hu Enyuan E Yang Xiao-Qing XQ Borodin Oleg O Wang Chunsheng C
Nature communications 20240326 1
Similar Datasets
Project description:Electrochemical cells that utilize lithium and sodium anodes are under active study for their potential to enable high-energy batteries. Liquid and solid polymer electrolytes based on ether chemistry are among the most promising choices for rechargeable lithium and sodium batteries. However, uncontrolled anionic polymerization of these electrolytes at low anode potentials and oxidative degradation at working potentials of the most interesting cathode chemistries have led to a quite concession in the field that solid-state or flexible batteries based on polymer electrolytes can only be achieved in cells based on low- or moderate-voltage cathodes. Here, we show that cationic chain transfer agents can prevent degradation of ether electrolytes by arresting uncontrolled polymer growth at the anode. We also report that cathode electrolyte interphases composed of preformed anionic polymers and supramolecules provide a fundamental strategy for extending the high voltage stability of ether-based electrolytes to potentials well above conventionally accepted limits.
| S-EPMC6626095 | biostudies-literature
Project description:Lithium ion batteries (LIBs) are the enabling technology for many of the societal changes that are expected to happen in the following years. Among all the challenges for which LIBs are the key, vehicle electrification is one of the most crucial. Current battery materials cannot provide the required power densities for such applications and therefore, it makes necessary to develop new materials. Silicon is one of the proposed as next generation battery materials, but still there are challenges to overcome. Poor capacity retention is one of those drawbacks, and because it is tightly related with its high capacity, it is a problem rather difficult to address with common and scalable fabrication processes. Here we show that combining 0D and 1D silicon nanostructures, high capacity and stability can be achieved even using standard electrode fabrication processes. Capacities as high as 1200 mAh/g for more than 500 cycles at high current densities (2 A/g) were achieved with the produced hybrid 0D/1D electrodes. In this research, it was shown that while 0D nanostructures provide good strain relaxation capabilities, 1D nanomaterials contribute with enhanced cohesion and conductive matrix integrity.
| S-EPMC7153466 | biostudies-literature
Project description:To develop an advanced anode for lithium-ion batteries, the electrochemical performance of a novel material comprising a porous artificial carbon (PAC)-Si composite was investigated. To increase the pore size and surface area of the composite, ammonium bicarbonate (ABC) was introduced during high-energy ball-milling, ensuring a uniform distribution of silicon within the PAC matrix. The physical and structural properties of the developed material were evaluated using several advanced techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM), and galvanostatic intermittent titration (GITT). Artificial graphite contains several macropores that can accommodate volume hysteresis and provide effective sites for anchoring Si nanoparticles, enabling efficient electrochemical reactions. GITT analysis revealed that the PAC-Si-CB-ABC composite exhibited superior lithium-ion diffusion compared to conventional graphite. The developed PAC(55%)-Si(45%)-CB-ABC electrode with PAA as the binder demonstrated a reversible capacity of 850 mAh g-1 at 100 mA g-1 and a high-rate capability of 600 mAh g-1 at 2000 mA g-1. A full cell employing the NCM622 cathode exhibited reversible cyclability of 128.9 mAh g-1 with a reasonable energy density of 323.3 Wh kg-1. These findings suggest that the developed composite is a useful anode system for advanced lithium-ion batteries.
| S-EPMC11643770 | biostudies-literature
Project description:To increase the energy storage density of lithium-ion batteries, silicon anodes have been explored due to their high capacity. One of the main challenges for silicon anodes are large volume variations during the lithiation processes. Recently, several high-performance schemes have been demonstrated with increased life cycles utilizing nanomaterials such as nanoparticles, nanowires, and thin films. However, a method that allows the large-scale production of silicon anodes remains to be demonstrated. Herein, we address this question by suggesting new scalable nanomaterial-based anodes. Si nanoparticles were grown on nanographite flakes by aerogel fabrication route from Si powder and nanographite mixture using polyvinyl alcohol (PVA). This silicon-nanographite aerogel electrode has stable specific capacity even at high current rates and exhibit good cyclic stability. The specific capacity is 455 mAh g-1 for 200th cycles with a coulombic efficiency of 97% at a current density 100 mA g-1.
| S-EPMC6787263 | biostudies-literature
Project description:Heavy-phosphorus-doped silicon anodes were fabricated on CuO nanorods for application in high power lithium-ion batteries. Since the conductivity of lithiated CuO is significantly better than that of CuO, after the first discharge, the voltage cut-off window was then set to the range covering only the discharge-charge range of Si. Thus, the CuO core was in situ lithiated and acts merely as the electronic conductor in the following cycles. The Si anode presented herein exhibited a capacity of 990 mAh/g at the rate of 9 A/g after 100 cycles. The anode also presented a stable rate performance even at a current density as high as 20 A/g.
| S-EPMC5301996 | biostudies-literature
Project description:The modification of silicon nanoparticles for lithium-ion battery anode materials has been a hot exploration subject in light of their excellent volume buffering performance. However, huge volume expansion leads to an unstable solid electrolyte interface (SEI) layer on the surface of the silicon anode material, resulting in short cell cycle life, which is an important factor limiting the application of silicon nanoparticles. Herein, a dual protection strategy to improve the cycling stability of commercial silicon nanoparticles is demonstrated. Specifically, the Si/s-C@TiO2 composite was produced by the hydrothermal method to achieve the embedding of commercial silicon nanoparticles in spherical carbon and the coating of the amorphous TiO2 shell on the outer surface. Buffering of silicon nanoparticle volume expansion by spherical carbon and also the stabilization of the TiO2 shell with high mechanical strength on the surface constructed a stable outer surface SEI layer of the new Si/s-C@TiO2 electrode during longer cycling. In addition, the spherical carbon and lithiated TiO2 further enhanced the electronic and ionic conductivity of the composite. Electrochemical measurements showed that the Si/s-C@TiO2 composite exhibited excellent lithium storage performance (780 mA h g-1 after 100 cycles at a current density of 0.2 A g-1 with a coulombic efficiency of 99%). Our strategy offers new ideas for the production of high stability and high-performance anode materials for lithium-ion batteries.
| S-EPMC9201707 | biostudies-literature
Project description:The volume change of the silicon anode seriously affects the electrode integrity and cycle stability. Herein, a binder, GCA13, with energy dissipation function and surface stability effect is proposed to enhance the cycle life and specific capacity. Unlike traditional binders that protect silicon electrodes through long-chain networks, GCA13 introduces citric acid molecules with short-range functions on the long-chain guar gum through weak interconnection. This short-range action is similar to the function of a spring, which can effectively buffer the silicon particle pulverization caused by the volume change. Therefore, the electrode can effectively maintain structural integration with ignorable cracks and alleviated thickness swelling. Thus, the Si@GCA13 anode exhibits a high reversible capacity of 1184 mAh g-1 under 2 A g-1 after 740 cycles with a latter coulombic efficiency of 99.9%. Extraordinarily, benefiting from the superior properties of the GCA13 binder, the electrode shows remarkable cycling stability under low (-15 and 0 °C) and high temperatures (60 °C). The work demonstrates the great potential of this binder design strategy to achieve the overall property promotion of Si anodes for practical application even under harsh service conditions.
| S-EPMC9839849 | biostudies-literature
Project description:Si is a promising anode material for Li ion batteries because of its high specific capacity, abundant reserve, and low cost. However, its rate performance and cycling stability are poor due to the severe particle pulverization during the lithiation/delithiation process. The high stress induced by the Li concentration gradient and anisotropic deformation is the main reason for the fracture of Si particles. Here we present a new stress mitigation strategy by uniformly distributing small amounts of Sn and Sb in Si micron-sized particles, which reduces the Li concentration gradient and realizes an isotropic lithiation/delithiation process. The Si8.5Sn0.5Sb microparticles (mean particle size: 8.22 μm) show over 6000-fold and tenfold improvements in electronic conductivity and Li diffusivity than Si particles, respectively. The discharge capacities of the Si8.5Sn0.5Sb microparticle anode after 100 cycles at 1.0 and 3.0 A g-1 are 1.62 and 1.19 Ah g-1, respectively, corresponding to a retention rate of 94.2% and 99.6%, respectively, relative to the capacity of the first cycle after activation. Multicomponent microparticle anodes containing Si, Sn, Sb, Ge and Ag prepared using the same method yields an ultra-low capacity decay rate of 0.02% per cycle for 1000 cycles at 1 A g-1, corroborating the proposed mechanism. The stress regulation mechanism enabled by the industry-compatible fabrication methods opens up enormous opportunities for low-cost and high-energy-density Li-ion batteries.
| S-EPMC10562352 | biostudies-literature
Project description:Thermally stable, flexible polymer gel electrolytes with high ionic conductivity are prepared by mixing the ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (C4mpyrTFSI), LiTFSI and poly(vinylidene difluoride-co-hexafluoropropylene (PVDF-HFP). FT-IR and Raman spectroscopy show that an amorphous film is obtained for high (60 %) C4mpyrTFSI contents. Thermogravimetric analysis (TGA) confirms that the polymer gels are stable below ∼300 °C in both nitrogen and air environments. Ionic conductivity of 1.9×10-3 S cm-2 at room temperature is achieved for the 60 % ionic liquid loaded gel. Germanium (Ge) anodes maintain a coulombic efficiency above 95 % after 90 cycles in potential cycling tests with the 60 % C4mpyrTFSI polymer gel.
| S-EPMC6909880 | biostudies-literature
Project description:High-voltage Li metal battery (HV-LMB) is one of the most promising energy storage technologies to achieve ultrahigh energy density. Nevertheless, electrolytes reported to date are difficult to simultaneously stabilize the Li metal anode and high-voltage cathode, especially without the assistance of expensive and corrosive high-concentration Li salts. Herein, a dual-interphase-stabilizing (DIS) and safe electrolyte that bypasses the high-concentration Li salt is reported. The electrolyte consists of high-flash-point sulfolane as solvent, molecular-orbital-engineered additives that enable stable B-F rich cathodic interphase, and unique C-F rich organic anodic interphase. The stable cycling of both Li metal anode and 4.75 V-LiCoO2 cathode in the DIS electrolyte (> 500 cycles) is demonstrated. HV-LMB pouch cells of a high energy density (435 Wh kg-1) can sustainably operate for more than 100 cycles. Moreover, the low cost and high thermal stability of the DIS electrolyte offer superior cost-effectiveness and safety for large-scale applications of HV-LMBs in the future.
| S-EPMC11600293 | biostudies-literature