Crystallization Behavior and Mechanical Property of Biodegradable Poly(butylene succinate-co-2-methyl succinate)/Cellulose Nanocrystals Composites
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC11207285 | biostudies-literature | 2024 Jun
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Biodegradable poly(butylene succinate) (PBS) nanocomposites are polymerized via in situ polymerization of succinic acid (SA) with cellulose nanocrystal (CNC)-loaded 1,4-butanediol (1,4-BD) mixtures. As reinforcement fillers, whisker-like CNCs are first dispersed in alcohol and sequentially spray-dried, before adding them to 1,4-BD. During the polymerization, the remains of sodium sulfonate in the CNC surfaces retard the polycondensation reaction, which is carefully controlled for the CNC-loaded systems. For the 0.1-1.0 wt% CNC-loaded PBS nanocomposites, it is found the nano-fillers are sufficiently dispersed to induce different crystallization behavior of the matrix polymer. The CNCs may initially act as heterogeneous nucleation sites of the molten PBS chains, during melt crystallization. In this case, most of them tend to be pushed out from the growing crystallites, which develop different nanocomposite morphologies with increasing CNC content. Among the resulting nanocomposites, the 0.1 wt% CNC-loaded system shows the highest tensile strength of 65.9 MPa, similar to that of nylon 6, as a representative engineering polymer as well as 2 fold elongation at break compared with Homo PBS. The in situ polymerized CNC-loaded PBS nanocomposites are expected to be a 100% biomass material for a virtuous cycle of biorefinery. Moreover, they demonstrate that the CNC-loaded PBS nanocomposite with a low CNC loading content can be used in various commercial applications for pollution abatement.
| S-EPMC9080038 | biostudies-literature
Project description:Biodegradable polymer composites from renewable resources are the next-generation of wood-like materials and are crucial for the development of various industries to meet sustainability goals. Functional applications like packaging, medicine, automotive, construction and sustainable housing are just some that would greatly benefit. Some of the existing industries, like wood plastic composites, already encompass given examples but are dominated by fossil-based polymers that are unsustainable. Thus, there is a background to bring a new perspective approach for the combination of microcrystalline cellulose (MCC) and nanofibrillated cellulose (NFC) fillers in bio-based poly (butylene succinate) matrix (PBS). MCC, NFC and MCC/NFC filler total loading at 40 wt % was used to obtain more insights for wood-like composite applications. The ability to tailor the biodegradable characteristics and the mechanical properties of PBS composites is indispensable for extended applications. Five compositions have been prepared with MCC and NFC fillers using melt blending approach. Young's modulus in tensile test mode and storage modulus at 20 °C in thermo-mechanical analysis have increased about two-fold. Thermal degradation temperature was increased by approximately 60 °C compared to MCC and NFC. Additionally, to estimate the compatibility of the components and morphology of the composite's SEM analysis was performed for fractured surfaces. The contact angle measurements testified the developed matrix interphase. Differential scanning calorimetry evidenced the trans-crystallization of the polymer after filler incorporation; the crystallization temperature shifted to the higher temperature region. The MCC has a stronger effect on the crystallinity degree than NFC filler. PBS disintegrated under composting conditions in a period of 75 days. The NFC/MCC addition facilitated the specimens' decomposition rate up to 60 days.
| S-EPMC7408463 | biostudies-literature
Project description:In this research, fully biobased composites consisting of poly(butylene 2,5-furandicarboxylate) (PBF) and cellulose nanocrystals (CNC) were successfully prepared through a common solution and casting method. The influence of CNC on the crystallization behavior, mechanical property, and hydrophilicity of PBF was systematically investigated. Under different crystallization processes, the crystallization of PBF was obviously promoted by CNC as a biobased nucleating agent. The Ozawa equation was not suitable to fit the nonisothermal melt crystallization kinetics of PBF and PBF/CNC composites. The nucleation activity of CNC was quantitatively calculated by the Dobreva method; moreover, the nucleation efficiency of CNC was further evaluated through the self-nucleation procedure. The isothermal melt crystallization kinetics of PBF and PBF/CNC composites was well described by the Avrami method; moreover, the crystallization mechanism and the crystal structure of PBF remained unchanged despite the presence of CNC. CNC also greatly enhanced both the mechanical property and hydrophilicity of PBF in the composites. In sum, low loadings of CNC simultaneously improved the crystallization, mechanical property, and hydrophilicity of PBF, which should be of significant importance and interest in fully biobased polymer composites from a sustainable viewpoint.
| S-EPMC11768259 | biostudies-literature
Project description:We report the manufacturing and characterization of poly (butylene succinate) (PBS) and micro cellulose (MCC) woody-like composites. These composites can be applied as a sustainable woody-like composite alternative to conventional fossil polymer-based wood-plastic composites (WPC). The PBS/MCC composites were prepared by using a melt blending of 70 wt% of MCC processed from bleached softwood. MCC was modified to enhance dispersion and compatibility by way of carbodiimide (CDI), polyhydroxy amides (PHA), alkyl ester (EST), (3-Aminopropyl) trimethoxysilane (APTMS), maleic acid anhydride (MAH), and polymeric diphenylmethane diisocyanate (PMDI). The addition of filler into PBS led to a 4.5-fold improvement of Young's modulus E for the MCC composite, in comparison to neat PBS. The 1.6-fold increase of E was obtained for CDI modified composition in comparison to the unmodified MCC composite. At room temperature, the storage modulus E' was found to improve by almost 4-fold for the APTMS composite. The EST composite showed a pronounced enhancement in viscoelasticity properties due to the introduction of flexible long alkyl chains in comparison to other compositions. The glass transition temperature was directly affected by the composition and its value was -15 °C for PBS, -30 °C for EST, and -10 °C for MAH composites. FTIR indicated the generation of strong bonding between the polymer and cellulose components in the composite. Scanning electron microscopy analysis evidenced the agglomeration of the MCC in the PBS/MCC composites. PMDI, APTMS, and CDI composites were characterized by the uniform dispersion of MCC particles and a decrease of polymer crystallinity. MCC chemical modification induced the enhancement of the thermal stability of MCC composites.
| S-EPMC6982959 | biostudies-literature
Project description:Biocomposites from bio-based poly(butylene succinate) (BioPBS) and grape pomace (GP) were made by melt extrusion-injection molding. Grape pomace is a low value byproduct from the wine industry that can be utilized as a filler to increase its value and to decrease the amount of polymer required in a composite blend. Experiments were performed with up to 50% grape pomace by weight. Composites were also compatibilized with in situ manufactured maleic anhydride-grafted BioPBS (MA-g-BioPBS). Flexural and impact strength were improved with the addition of GP up to the addition of 50 wt % GP, suggesting that at this loading the formulation reached threshold performance. The blend of (57:40:3) BioPBS/GP/MA-g-BioPBS showed the best overall performance in terms of a balance of both mechanical properties and thermal properties. The increase in impact resistance confirmed that the GP acted as a reinforcing phase. The addition of 3 wt % MA-g-BioPBS in samples containing 40 wt % of grape pomace resulted in improvements of 28.4 and 59% in flexural and impact strengths, respectively, compared to neat BioPBS. Heat distortion temperature increased with the addition of grape pomace by 14.3% in a blend combination of 57% BioPBS, 40% grape pomace, and 3% MA-g-BioPBS compared to neat BioPBS. Scanning electron microscopy results show improved interfacial adhesion with the addition of MA-g-BioPBS and thermogravimetric analysis results prove that the GP is thermally stable under the processing conditions. This study shows that GP can be successfully incorporated into a BioPBS matrix to create biocomposites with improved thermal and mechanical properties.
| S-EPMC6643474 | biostudies-literature
Project description:As an important biodegradable and partially biobased copolyester, poly(butylene succinate-co-terephthalate) (PBST) possesses comparable thermal and mechanical properties and superior gas barrier performance when compared with poly(butylene adipate-co-terephthalate) (PBAT), but it was found to display poorer melt processability during pelletizing and injection molding. To make clear its melt crystallization behavior under rapid cooling, PBST48 and PBST44 were synthesized, and their melt crystallization was investigated comparatively with PBAT48. PBST48 showed a PBAT48-comparable melt crystallization performance at a cooling rate of 10 °C/min or at isothermal conditions, but it showed a melt crystallization ability at a cooling rate of 40 °C/min which was clearly poorer. PBST44, which has the same mass composition as PBAT48, completely lost its melt crystallization ability under the rapid cooling. The weaker chain mobility of PBST, resulting from its shorter succinate moiety, is responsible for its inferior melt crystallization ability and processability. In comparison with PBAT48, PBST48 displayed higher tensile modulus, and both PBST48 and PBST44 showed higher light transmittance. The findings in this study deepen the understanding of PBST's properties and will be of guiding significance for improving PBST's processability and application development.
| S-EPMC11397942 | biostudies-literature
Project description:Co-crystallization plays a crucial role in the integration and regulation of thermal and mechanical properties in polymer blends, but the poor compatibility of the components in the crystal phase has always been a major obstacle to co-crystallization, which puts forward stricter requests for linkage and interaction between different entities. On the basis of the hydrogen-bonding interaction that can promote chain stacking and thus improve miscibility, we propose that crystalline/crystalline blends of 2-ureido-4[1H]-pyrimidinone (UPy)-functionalized poly(butylene succinate) and poly(butylene fumarate) (PBS-UPy/PBF-UPy) where UPy groups with quadruple hydrogen-bonding interaction are employed to connect different chain ends, could inhibit phase separation and improve co-crystallization. PBS-UPy/PBF-UPy blends exhibit complex component-dependent and cooling-rate-dependent co-crystallization behavior. A high level of co-crystallization occurs in the range of PBS-UPy-rich fractions, and the proportion could approach over 98% under optimized conditions with the aid of UPy quadruple hydrogen bonds interaction. This work enriches the understanding of co-crystallization in crystalline/crystalline polymer blends and provides more possibility for the design of structures and properties of polymer materials.
| S-EPMC9608175 | biostudies-literature
Project description:Compression molded biodegradable films based on poly(butylene succinate) (PBS) and poly(butylene adipate-co-terephthalate) (PBAT) at varying weights were prepared, and their relevant properties for packaging applications are here reported. The melt rheology of the blends was first studied, and the binary PBS/PBAT blends exhibited marked shear thinning and complex thermoreological behavior, due to the formation of a co-continuous morphology in the 50 wt% blend. The films were characterized by infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), mechanical tensile tests, scanning electron microscopy (SEM), and oxygen and water vapor permeability. PBS crystallization was inhibited in the blends with higher contents of PBAT, and FTIR and SEM analysis suggested that limited interactions occur between the two polymer phases. The films showed increasing stiffness as the PBS percentage increased; further, a sharp decrease in elongation at break was noticed for the films containing percentages of PBS greater than 25 wt%. Gas permeability decreased with increasing PBS content, indicating that the barrier properties of PBS can be tuned by blending with PBAT. The results obtained point out that the blend containing 25 wt% PBS is a good compromise between elastic modulus (135 MPa) and deformation at break (390%) values. Overall, PBS/PBAT blends represent an alternative for packaging films, as they combine biodegradability, good barrier properties and reasonable mechanical behavior.
| S-EPMC7600530 | biostudies-literature
Project description:A novel biobased and biodegradable polyester, i.e., poly(butylene succinate-co-butylene 2-methylsuccinate) (P(BS-BMS)) was synthesized by succinic acid (SA), 2-methylsuccinic acid (MSA), and 1,4-butanediol (BDO) via a typically two-step esterification and polycondensation procedure. The chemical structure and macromolecular weight of obtained copolymers were characterized by 1H NMR, 13C NMR, and GPC. The melting temperature and degree of crystallinity were also studied by DSC, and it was found that the values were gradually decreased with increasing of MSA content, while the thermal stability remained almost unchanged which was tested by TGA. In addition, the biodegradation rate of the P(BS-BMS) copolymers could be controlled by adjusting the ratio of SA and MSA, and such biodegradability could make P(BS-BMS) copolymers avoid microplastic pollution which may be brought to the environment for applications in agricultural field. When we applied P(BS-BMS) copolymers as pesticide carriers which were prepared by premix membrane emulsification (PME) method for controlling Avermectin delivery, an improvement of dispersion and utilization of active ingredient was obviously witnessed. It showed a burst release process first followed by a sustained release of Avermectin for a long period, which had a great potential to be an effective and environmental friendly pesticide-release vehicle.
| S-EPMC6539853 | biostudies-literature
Project description:Novel biobased double crystalline poly(butylene succinate)-b-poly(butylene 2,5-thiophenedicarboxylate) (PBS-b-PBTh) multiblock copolyesters with excellent thermal and mechanical properties were prepared from two hydroxyl-terminated PBS-diol and PBTh-diol prepolymers via a chain extension reaction. Both PBS and PBTh segments were semicrystalline, with the aliphatic PBS segment being the soft segment while the aromatic PBTh segment was the hard segment. In the case of PBS-b-PBTh, the two segments were partially miscible in the amorphous region; moreover, the melting temperature of each segment still remained very high compared with that of each homopolyester PBS and PBTh. The melt crystallization behavior of both segments was enhanced in the case of PBS-b-PBTh, which was attributed to different mechanisms. The crystal structure study revealed that both segments crystallized separately and showed the characteristic diffraction peaks, respectively. Compared with that of PBS, PBS-b-PBTh displayed a significant increase in the elongation at break while still maintaining a relatively high break strength. This research provides some new insights to synthesize biobased polyesters with excellent thermal and mechanical properties, which should be interesting from a sustainable viewpoint.
| S-EPMC11859257 | biostudies-literature