Mapping gene expression quantitative trait loci by singular value decomposition and independent component analysis.
Ontology highlight
ABSTRACT: Background
The combination of gene expression profiling with linkage analysis has become a powerful paradigm for mapping gene expression quantitative trait loci (eQTL). To date, most studies have searched for eQTL by analyzing gene expression traits one at a time. As thousands of expression traits are typically analyzed, this can reduce power because of the need to correct for the number of hypothesis tests performed. In addition, gene expression traits exhibit a complex correlation structure, which is ignored when analyzing traits individually.Results
To address these issues, we applied two different multivariate dimension reduction techniques, the Singular Value Decomposition (SVD) and Independent Component Analysis (ICA) to gene expression traits derived from a cross between two strains of Saccharomyces cerevisiae. Both methods decompose the data into a set of meta-traits, which are linear combinations of all the expression traits. The meta-traits were enriched for several Gene Ontology categories including metabolic pathways, stress response, RNA processing, ion transport, retro-transposition and telomeric maintenance. Genome-wide linkage analysis was performed on the top 20 meta-traits from both techniques. In total, 21 eQTL were found, of which 11 are novel. Interestingly, both cis and trans-linkages to the meta-traits were observed.Conclusion
These results demonstrate that dimension reduction methods are a useful and complementary approach for probing the genetic architecture of gene expression variation.
SUBMITTER: Biswas S
PROVIDER: S-EPMC2424053 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Mendelian loci that control the expression levels of transcripts are called expression quantitative trait loci (eQTL). When mapping eQTL, we often deal with thousands of expression traits simultaneously, which complicates the statistical model and data analysis. Two simple approaches may be taken in eQTL analysis: (1) individual transcript analysis in which a single expression trait is mapped at a time and the entire eQTL mapping involves separate analysis of thousands of traits and (2) individual marker analysis where differentially expressed transcripts are detected on the basis of their association with the segregation pattern of an individual marker and the entire analysis requires scanning markers of the entire genome. Neither approach is optimal because data are not analyzed jointly. We develop a Bayesian clustering method that analyzes all expressed transcripts and markers jointly in a single model. A transcript may be simultaneously associated with multiple markers. Additionally, a marker may simultaneously alter the expression of multiple transcripts. This is a model-based method that combines a Gaussian mixture of expression data with segregation of multiple linked marker loci. Parameter estimation for each variable is obtained via the posterior mean drawn from a Markov chain Monte Carlo sample. The method allows a regular quantitative trait to be included as an expression trait and subject to the same clustering assignment. If an expression trait links to a locus where a quantitative trait also links, the expressed transcript is considered to be associated with the quantitative trait. The method is applied to a microarray experiment with 60 F(2) mice measured for 25 different obesity-related quantitative traits. In the experiment, approximately 40,000 transcripts and 145 codominant markers are investigated for their associations. A program written in SAS/IML is available from the authors on request.
| S-EPMC1893048 | biostudies-literature
Project description:Today, breeders perform genomic-assisted breeding to improve more than one trait. However, frequently there are several traits under study at one time, and the implementation of current genomic multiple-trait and multiple-environment models is challenging. Consequently, we propose a four-stage analysis for multiple-trait data in this paper. In the first stage, we perform singular value decomposition (SVD) on the resulting matrix of trait responses; in the second stage, we perform multiple trait analysis on transformed responses. In stages three and four, we collect and transform the traits back to their original state and obtain the parameter estimates and the predictions on these scale variables prior to transformation. The results of the proposed method are compared, in terms of parameter estimation and prediction accuracy, with the results of the Bayesian multiple-trait and multiple-environment model (BMTME) previously described in the literature. We found that the proposed method based on SVD produced similar results, in terms of parameter estimation and prediction accuracy, to those obtained with the BMTME model. Moreover, the proposed multiple-trait method is atractive because it can be implemented using current single-trait genomic prediction software, which yields a more efficient algorithm in terms of computation.
| S-EPMC6460759 | biostudies-literature
Project description:Genome-wide expression Quantitative Trait Loci (eQTL) studies in humans have provided numerous insights into the genetics of both gene expression and complex diseases. While the majority of eQTL identified in genome-wide analyses impact a single gene, eQTL that impact many genes are particularly valuable for network modeling and disease analysis. To enable the identification of such broad impact eQTL, we introduce CONFETI: Confounding Factor Estimation Through Independent component analysis. CONFETI is designed to address two conflicting issues when searching for broad impact eQTL: the need to account for non-genetic confounding factors that can lower the power of the analysis or produce broad impact eQTL false positives, and the tendency of methods that account for confounding factors to model broad impact eQTL as non-genetic variation. The key advance of the CONFETI framework is the use of Independent Component Analysis (ICA) to identify variation likely caused by broad impact eQTL when constructing the sample covariance matrix used for the random effect in a mixed model. We show that CONFETI has better performance than other mixed model confounding factor methods when considering broad impact eQTL recovery from synthetic data. We also used the CONFETI framework and these same confounding factor methods to identify eQTL that replicate between matched twin pair datasets in the Multiple Tissue Human Expression Resource (MuTHER), the Depression Genes Networks study (DGN), the Netherlands Study of Depression and Anxiety (NESDA), and multiple tissue types in the Genotype-Tissue Expression (GTEx) consortium. These analyses identified both cis-eQTL and trans-eQTL impacting individual genes, and CONFETI had better or comparable performance to other mixed model confounding factor analysis methods when identifying such eQTL. In these analyses, we were able to identify and replicate a few broad impact eQTL although the overall number was small even when applying CONFETI. In light of these results, we discuss the broad impact eQTL that have been previously reported from the analysis of human data and suggest that considerable caution should be exercised when making biological inferences based on these reported eQTL.
| S-EPMC5448815 | biostudies-literature
Project description:The detection of genes that show similar profiles under different experimental conditions is often an initial step in inferring the biological significance of such genes. Visualization tools are used to identify genes with similar profiles in microarray studies. Given the large number of genes recorded in microarray experiments, gene expression data are generally displayed on a low dimensional plot, based on linear methods. However, microarray data show nonlinearity, due to high-order terms of interaction between genes, so alternative approaches, such as kernel methods, may be more appropriate. We introduce a technique that combines kernel principal component analysis (KPCA) and Biplot to visualize gene expression profiles. Our approach relies on the singular value decomposition of the input matrix and incorporates an additional step that involves KPCA. The main properties of our method are the extraction of nonlinear features and the preservation of the input variables (genes) in the output display. We apply this algorithm to colon tumor, leukemia and lymphoma datasets. Our approach reveals the underlying structure of the gene expression profiles and provides a more intuitive understanding of the gene and sample association.
| S-EPMC5054124 | biostudies-literature
Project description:In 2001, Sen and Churchill reported a general Bayesian framework for quantitative trait loci (QTL) mapping in inbred line crosses. The framework is a powerful one, as many QTL mapping methods can be represented as special cases and many important considerations are accommodated. These considerations include accounting for covariates, nonstandard crosses, missing genotypes, genotyping errors, multiple interacting QTL, and nonnormal as well as multivariate phenotypes. The dimension of a multivariate phenotype easily handled within the framework is bounded by the number of subjects, as a full-rank covariance matrix describing correlations across the phenotypes is required. We address this limitation and extend the Sen-Churchill framework to accommodate expression quantitative trait loci (eQTL) mapping studies, where high-dimensional gene-expression phenotypes are obtained via microarrays. Doing so allows for the precise comparison of existing eQTL mapping approaches and facilitates the development of an eQTL interval-mapping approach that shares information across transcripts and improves localization of eQTL. Evaluations are based on simulation studies and a study of diabetes in mice.
| S-EPMC2034641 | biostudies-literature
Project description:We applied a simple and efficient two-step method to analyze a family-based association study of gene expression quantitative trait loci (eQTL) in a mixed model framework. This two-step method produces very similar results to the full mixed model method, with our method being significantly faster than the full model. Using the Genetic Analysis Workshop 15 (GAW15) Problem 1 data, we demonstrated the value of data filtering for reducing the number of tests and controlling the number of false positives. Specifically, we showed that removing non-expressed genes by filtering on expression variability effectively reduced the number of tests by nearly 50%. Furthermore, we demonstrated that filtering on genotype counts substantially reduced spurious detection. Finally, we restricted our analysis to the markers and transcripts that were closely located. We found five times more signals in close proximity (cis-) to transcripts than in our genome-wide analysis. Our results suggest that careful pre-filtering and partitioning of data are crucial for controlling false positives and allowing detection of genuine effects in genetic analysis of gene expression.
| S-EPMC2367564 | biostudies-literature
Project description:BackgroundExpression quantitative trait loci (eQTL) have been identified using tissue or cell samples from diverse human populations, thus enhancing our understanding of regulation of gene expression. However, few studies have attempted to identify eQTL in racially admixed populations such as Hispanics.MethodsWe performed a systematic eQTL study to identify regulatory variants of gene expression in whole blood from 121 Puerto Rican children with (n = 63) and without (n = 58) asthma. Genome-wide genotyping was conducted using the Illumina Omni2.5M Bead Chip, and gene expression was assessed using the Illumina HT-12 microarray. After completing quality control, we performed a pair-wise genome analysis of ~15 K transcripts and ~1.3 M SNPs for both local and distal effects. This analysis was conducted under a regression framework adjusting for age, gender and principal components derived from both genotypic and mRNA data. We used a false discovery rate (FDR) approach to identify significant eQTL signals, which were next compared to top eQTL signals from existing eQTL databases. We then performed a pathway analysis for our top genes.ResultsWe identified 36,720 local pairs in 3,391 unique genes and 1,851 distal pairs in 446 unique genes at FDR <0.05, corresponding to unadjusted P values lower than 1.5x10-4 and 4.5x10-9, respectively. A significant proportion of genes identified in our study overlapped with those identified in previous studies. We also found an enrichment of disease-related genes in our eQTL list.ConclusionsWe present results from the first eQTL study in Puerto Rican children, who are members of a unique Hispanic cohort disproportionately affected with asthma, prematurity, obesity and other common diseases. Our study confirmed eQTL signals identified in other ethnic groups, while also detecting additional eQTLs unique to our study population. The identified eQTLs will help prioritize findings from future genome-wide association studies in Puerto Ricans.
| S-EPMC4376710 | biostudies-literature
Project description:MotivationHigh throughput biomedical measurements normally capture multiple overlaid biologically relevant signals and often also signals representing different types of technical artefacts like e.g. batch effects. Signal identification and decomposition are accordingly main objectives in statistical biomedical modeling and data analysis. Existing methods, aimed at signal reconstruction and deconvolution, in general, are either supervised, contain parameters that need to be estimated or present other types of ad hoc features. We here introduce SubMatrix Selection Singular Value Decomposition (SMSSVD), a parameter-free unsupervised signal decomposition and dimension reduction method, designed to reduce noise, adaptively for each low-rank-signal in a given data matrix, and represent the signals in the data in a way that enable unbiased exploratory analysis and reconstruction of multiple overlaid signals, including identifying groups of variables that drive different signals.ResultsThe SMSSVD method produces a denoised signal decomposition from a given data matrix. It also guarantees orthogonality between signal components in a straightforward manner and it is designed to make automation possible. We illustrate SMSSVD by applying it to several real and synthetic datasets and compare its performance to golden standard methods like PCA (Principal Component Analysis) and SPC (Sparse Principal Components, using Lasso constraints). The SMSSVD is computationally efficient and despite being a parameter-free method, in general, outperforms existing statistical learning methods.Availability and implementationA Julia implementation of SMSSVD is openly available on GitHub (https://github.com/rasmushenningsson/SubMatrixSelectionSVD.jl).Supplementary informationSupplementary data are available at Bioinformatics online.
| S-EPMC6361234 | biostudies-literature
Project description:We describe the use of singular value decomposition in transforming genome-wide expression data from genes x arrays space to reduced diagonalized "eigengenes" x "eigenarrays" space, where the eigengenes (or eigenarrays) are unique orthonormal superpositions of the genes (or arrays). Normalizing the data by filtering out the eigengenes (and eigenarrays) that are inferred to represent noise or experimental artifacts enables meaningful comparison of the expression of different genes across different arrays in different experiments. Sorting the data according to the eigengenes and eigenarrays gives a global picture of the dynamics of gene expression, in which individual genes and arrays appear to be classified into groups of similar regulation and function, or similar cellular state and biological phenotype, respectively. After normalization and sorting, the significant eigengenes and eigenarrays can be associated with observed genome-wide effects of regulators, or with measured samples, in which these regulators are overactive or underactive, respectively.
| S-EPMC27718 | biostudies-literature
Project description:We present an approach for quantitative trait locus (QTL) mapping, termed as 'lineage-specific QTL mapping', for inferring allelic changes of QTL evolution along with branches in a phylogeny. We describe and analyze the simplest case: by adding a third taxon into the normal procedure of QTL mapping between pairs of taxa, such inferences can be made along lineages to a presumed common ancestor. Although comparisons of QTL maps among species can identify homology of QTLs by apparent co-location, lineage-specific mapping of QTL can classify homology into (1) orthology (shared origin of QTL) versus (2) paralogy (independent origin of QTL within resolution of map distance). In this light, we present a graphical method that identifies six modes of QTL evolution in a three taxon comparison. We then apply our model to map lineage-specific QTLs for inbreeding among three taxa of yellow monkey-flower: Mimulus guttatus and two inbreeders M. platycalyx and M. micranthus, but critically assuming outcrossing was the ancestral state. The two most common modes of homology across traits were orthologous (shared ancestry of mutation for QTL alleles). The outbreeder M. guttatus had the fewest lineage-specific QTL, in accordance with the presumed ancestry of outbreeding. Extensions of lineage-specific QTL mapping to other types of data and crosses, and to inference of ancestral QTL state, are discussed.
| S-EPMC3716265 | biostudies-literature