Dataset Information

Circular DNA and DNA/RNA hybrid molecules as scaffolds for ricin inhibitor design.

ABSTRACT: Ricin Toxin A-chain (RTA) catalyzes the hydrolytic depurination of A4324, the first adenosine of the GAGA tetra-loop portion of 28S eukaryotic ribosomal RNA. Truncated stem-loop versions of the 28S rRNA are RTA substrates. Here, we investigate circular DNA and DNA/RNA hybrid GAGA sequence oligonucleotides as minimal substrates and inhibitor scaffolds for RTA catalysis. Closing the 5'- and 3'-ends of a d(GAGA) tetraloop creates a substrate with 92-fold more activity with RTA (kcat/Km) than that for the d(GAGA) linear form. Circular substrates have catalytic rates (kcat) comparable to and exceeding those of RNA and DNA stem-loop substrates, respectively. RTA inhibition into the nanomolar range has been achieved by introducing an N-benzyl-hydroxypyrrolidine (N-Bn) transition state analogue at the RTA depurination site in a circular GAGA motif. The RNA/DNA hybrid oligonucleotide cyclic GdAGA provides a new scaffold for RTA inhibitor design, and cyclic G(N-Bn)GA is the smallest tight-binding RTA inhibitor (Ki = 70 nM). The design of such molecules that lack the base-paired stem-loop architecture opens new chemical synthetic approaches to RTA inhibition.

SUBMITTER: Sturm MB

PROVIDER: S-EPMC2518448 | biostudies-literature | 2007 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Circular DNA and DNA/RNA hybrid molecules as scaffolds for ricin inhibitor design.

Sturm Matthew B MB Roday Setu S Schramm Vern L VL

Journal of the American Chemical Society 20070407 17

Ricin Toxin A-chain (RTA) catalyzes the hydrolytic depurination of A4324, the first adenosine of the GAGA tetra-loop portion of 28S eukaryotic ribosomal RNA. Truncated stem-loop versions of the 28S rRNA are RTA substrates. Here, we investigate circular DNA and DNA/RNA hybrid GAGA sequence oligonucleotides as minimal substrates and inhibitor scaffolds for RTA catalysis. Closing the 5'- and 3'-ends of a d(GAGA) tetraloop creates a substrate with 92-fold more activity with RTA (kcat/Km) than that f ...[more]

PMID: 17417841

Similar Datasets

Project description:In this paper, a circular hybrid plasmonic waveguide-fed nano-antenna (CHPWFNA) has been introduced for operating at the standard telecommunication wavelength of 1,550 nm. For the first time, the dispersion relation of a circular hybrid plasmonic waveguide as the feed line of the proposed nano-antenna has been derived, analytically. To verify the accuracy of the analytical solution, two numerical techniques of finite element method (FEM) and finite-difference time-domain (FDTD) method have been used. Numerical results are well-matched with the theoretical ones. The characteristics of the CHPWFNA have been studied by two mentioned methods. The obtained realized gains (directivities) by the FDTD and FEM simulations are 9.03 dB (9.38 dBi) and 10.00 dB (10.32 dBi), respectively, at 1,550 nm wavelength. For on-chip point-to-point wireless link performance, the obtained quality factor by the FDTD method (FEM) is 63.97 (100). The obtained radiation characteristics and link performance reveal that at 1,550 nm, the proposed antenna has the best performance. Besides, the frequency bandwidth of the antenna (185-200 THz) covers the low-loss optical frequency range. Also, paying attention to the laser eye safety is so important. Consequently, the wavelength of 1,550 nm has been chosen as the target wavelength. Moreover, the array configuration has been studied and the directivity and realized gain have been obtained based on the array factor theory and numerical methods, which are agree with each other. The attained realized gain by the FDTD method (FEM) for the considered single row array, at 1,550 nm, is 11.20 dB (11.30 dB). There is a little difference between the numerical results due to the total mesh size, the grid size refinement and the relative error of the numerical methods convergence. Finally, as one of the most important challenges in fabrication is the gold surface quality, we have studied the effect of gold surface roughness and its pentagonal cross section on the antenna performance.

Project description:Scaffolds for bone regeneration have been engineered by a plethora of manufacturing technologies and biomaterials. However, the performance of these systems is often limited by lack of robustness in the process design, that hampers their scalability to clinical application. In the present study, Design of Experiment (DoE) was used as statistical tool to design the biofabrication of hybrid hydroxyapatite (HA)/collagen scaffolds for bone regeneration and optimize their integration in a multilayer osteochondral device. The scaffolds were synthesized via a multi-step bioinspired process consisting in HA nano-crystals nucleation on the collagen self-assembling fibers and ribose glycation was used as collagen cross-linking method to modulate the mechanical and physical properties. The process design was performed by selecting hydrogel concentration, HA/collagen ratio and cross-linker content as key variables and the fabrication was carried out basing on a full factorial design. Scaffold performances were tested by evaluating porosity, swelling ratio, degradation rate and mechanical behavior as model output responses while physicochemical properties of the constructs were evaluated by TGA, ICP, FT-IR spectroscopy, and XRD analysis. Physicochemical characterizations confirmed the nucleation of a biomimetic inorganic phase and the interaction of the HA and collagenic components. The DoE model revealed a significant interaction between HA content and collagen cross-linking in determining porosity, swelling and mechanical properties of the scaffolds. The combined effect of hydrogel concentration and mineral phase played a key role on porosity and swelling while degradation resulted to be mainly affected by the HA loading and ribose content. The model was then used to determine the suitable input parameters for the synthesis of multi-layer scaffolds with graded mineralization rate, that can be used to mimic the whole cartilage-bone interface. This work proved that experimental design applied to complex biofabrication processes represents an effective and reliable way to design hybrid constructs with standardized and tunable properties for osteochondral tissue engineering.

Dataset Information

Circular DNA and DNA/RNA hybrid molecules as scaffolds for ricin inhibitor design.

Publications

Circular DNA and DNA/RNA hybrid molecules as scaffolds for ricin inhibitor design.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets