Structural insights into fibronectin type III domain-mediated signaling.
Ontology highlight
ABSTRACT:
SUBMITTER: Bencharit S
PROVIDER: S-EPMC2583400 | biostudies-literature | 2007 Mar
REPOSITORIES: biostudies-literature
Publications
Structural insights into fibronectin type III domain-mediated signaling.
Bencharit Sompop S Cui Cai Bin CB Siddiqui Adnan A Howard-Williams Escher L EL Sondek John J Zuobi-Hasona Kheir K Aukhil Ikramuddin I
Journal of molecular biology 20061011 2
The alternatively spliced type III extradomain B (EIIIB) of fibronectin (FN) is expressed only during embryogenesis, wound healing and tumorigenesis. The biological function of this domain is unclear. We describe here the first crystal structure of the interface between alternatively spliced EIIIB and its adjacent FN type III domain 8 (FN B-8). The opened CC' loop of EIIIB, and the rotation and tilt of EIIIB allow good access to the FG loop of FN-8, which is normally hindered by the CC' loop of ...[more]
Similar Datasets
Project description:Consensus protein design is a rapid and reliable technique for the improvement of protein stability, which relies on the use of homologous protein sequences. To enhance the stability of a fibronectin type III (FN3) domain, consensus design was employed using an alignment of 2123 sequences. The resulting FN3 domain, FN3con, has unprecedented stability, with a melting temperature >100°C, a ?G(D-N) of 15.5 kcal mol(-1) and a greatly reduced unfolding rate compared with wild-type. To determine the underlying molecular basis for stability, an X-ray crystal structure of FN3con was determined to 2.0 Å and compared with other FN3 domains of varying stabilities. The structure of FN3con reveals significantly increased salt bridge interactions that are cooperatively networked, and a highly optimized hydrophobic core. Molecular dynamics simulations of FN3con and comparison structures show the cooperative power of electrostatic and hydrophobic networks in improving FN3con stability. Taken together, our data reveal that FN3con stability does not result from a single mechanism, but rather the combination of several features and the removal of non-conserved, unfavorable interactions. The large number of sequences employed in this study has most likely enhanced the robustness of the consensus design, which is now possible due to the increased sequence availability in the post-genomic era. These studies increase our knowledge of the molecular mechanisms that govern stability and demonstrate the rising potential for enhancing stability via the consensus method.
| S-EPMC4330816 | biostudies-literature
Project description:The mechanism of fibronectin (FN) assembly and the self-association sites are still unclear and contradictory, although the N-terminal 70-kDa region ((I)1-9) is commonly accepted as one of the assembly sites. We previously found that (I)1-9 binds to superfibronectin, which is an artificial FN aggregate induced by anastellin. In the present study, we found that (I)1-9 bound to the aggregate formed by anastellin and a small FN fragment, (III)1-2. An engineered disulfide bond in (III)2, which stabilizes folding, inhibited aggregation, but a disulfide bond in (III)1 did not. A gelatin precipitation assay showed that (I)1-9 did not interact with anastellin, (III)1, (III)2, (III)1-2, or several (III)1-2 mutants including (III)1-2KADA. (In contrast to previous studies, we found that the (III)1-2KADA mutant was identical in conformation to wild-type (III)1-2.) Because (I)1-9 only bound to the aggregate and the unfolding of (III)2 played a role in aggregation, we generated a (III)2 domain that was destabilized by deletion of the G strand. This mutant bound (I)1-9 as shown by the gelatin precipitation assay and fluorescence resonance energy transfer analysis, and it inhibited FN matrix assembly when added to cell culture. Next, we introduced disulfide mutations into full-length FN. Three disulfide locks in (III)2, (III)3, and (III)11 were required to dramatically reduce anastellin-induced aggregation. When we tested the disulfide mutants in cell culture, only the disulfide bond in (III)2 reduced the FN matrix. These results suggest that the unfolding of (III)2 is one of the key factors for FN aggregation and assembly.
| S-EPMC3234744 | biostudies-literature
Project description:BACKGROUND:The histone methyltransferase SETDB1 (also known as ESET) represses genes and various types of transposable elements, such as endogenous retroviruses (ERVs) and integrated exogenous retroviruses, through a deposition of trimethylation on lysine 9 of histone H3 (H3K9me3) in mouse embryonic stem cells (mESCs). ATF7IP (also known as MCAF1 or AM), a binding partner of SETDB1, regulates the nuclear localization and enzymatic activities of SETDB1 and plays a crucial role in SETDB1-mediated transcriptional silencing. In this study, we further dissected the ATF7IP function with its truncated mutants in Atf7ip knockout (KO) mESCs. RESULTS:We demonstrated that the SETDB1-interaction region within ATF7IP is essential for ATF7IP-dependent SETDB1 nuclear localization and silencing of both ERVs and integrated retroviral transgenes, whereas its C-terminal fibronectin type-III (FNIII) domain is dispensable for both these functions; rather, it has a role in efficient silencing mediated by the SETDB1 complex. Proteomic analysis identified a number of FNIII domain-interacting proteins, some of which have a consensus binding motif. We showed that one of the FNIII domain-binding proteins, ZMYM2, was involved in the efficient silencing of a transgene by ATF7IP. RNA-seq analysis of Atf7ip KO and WT or the FNIII domain mutant of ATF7IP-rescued Atf7ip KO mESCs showed that the FNIII domain mutant re-silenced most de-repressed SETDB1/ATF7IP-targeted ERVs compared to the WT. However, the silencing activity of the FNIII domain mutant was weaker than that of the ATF7IP WT, and some of the de-repressed germ cell-related genes in Atf7ip KO mESCs were not silenced by the FNIII domain mutant. Such germ cell-related genes are targeted and silenced by the MAX/MGA complex, and MGA was also identified as another potential binding molecule of the ATF7IP FNIII domain in the proteomic analysis. This suggests that the FNIII domain of ATF7IP acts as a binding hub of ATF7IP-interacting molecules possessing a specific interacting motif we named FAM and contributes to one layer of the SETDB1/ATF7IP complex-mediated silencing mechanisms. CONCLUSIONS:Our findings contributed to further understanding the function of ATF7IP in the SETDB1 complex, revealed the role of the FNIII domain of ATF7IP in transcriptional silencing, and suggested a potential underlying molecular mechanism for it.
| S-EPMC7706265 | biostudies-literature
Project description:Fibronectin is a modular extracellular matrix protein that is essential for vertebrate development. The third type III domain (3FN3) in fibronectin interacts with other parts of fibronectin and with anastellin, a protein fragment that causes fibronectin aggregation. 3FN3 opens readily both as an isolated domain in solution and when part of fibronectin in stretched fibrils, and it was proposed that this opening is important for anastellin binding. We determined the structure of 3FN3 using nuclear magnetic resonance spectroscopy, and we investigated its stability, folding, and unfolding. Similar to most other FN3 domains, 3FN3 contains two antiparallel β-sheets that are composed of three (A, B, and E) and four (C, D, F, and G) β-strands, respectively, and are held together by a conserved hydrophobic interface. cis-trans isomerization of P847 at the end of β-strand C leads to observable conformational heterogeneity in 3FN3, with a cis peptide bond present in almost one-quarter of the molecules. The chemical stability of 3FN3 is relatively low, but the folding rate constant in the absence of denaturant is in the same range as those of other, more stable FN3 domains. Interestingly, the unfolding rate constant in the absence of denaturant is several orders of magnitude higher than the unfolding rate constants of other FN3 domains investigated to date. This unusually fast rate is comparable to the rate of binding of 3FN3 to anastellin at saturating anastellin concentrations, consistent with the model in which 3FN3 has to unfold to interact with anastellin.
| S-EPMC5074414 | biostudies-literature
Project description:RationaleTissue fibrosis is considered a dysregulated wound-healing response. Fibronectin containing extra type III domain A (EDA) is implicated in the regulation of wound healing. EDA-containing fibronectin is deposited during wound repair, and its presence precedes that of collagen.ObjectivesTo investigate the role of EDA-containing fibronectin in lung fibrogenesis.MethodsPrimary lung fibroblasts from patients with idiopathic pulmonary fibrosis or from patients undergoing resection for lung cancer were assessed for EDA-containing fibronectin and alpha-smooth muscle actin (alpha-SMA) expression. Mice lacking the EDA domain of fibronectin and their wild-type littermates were challenged with the bleomycin model of lung fibrosis. Primary lung fibroblasts from these mice were assayed in vitro to determine the contribution of EDA-containing fibronectin to fibroblast phenotypes.Measurements and main resultsIdiopathic pulmonary fibrosis lung fibroblasts produced markedly more EDA-containing fibronectin and alpha-SMA than control fibroblasts. EDA-null mice failed to develop significant fibrosis 21 days after bleomycin challenge, whereas wild-type controls developed the expected increase in total lung collagen. Histologic analysis of EDA-null lungs after bleomycin showed less collagen and fewer alpha-SMA-expressing myofibroblasts compared with that observed in wild-type mice. Failure to develop lung fibrosis in EDA-null mice correlated with diminished activation of latent transforming growth factor (TGF)-beta and decreased lung fibroblast responsiveness to active TGF-beta in vitro.ConclusionsThe data show that EDA-containing fibronectin is essential for the fibrotic resolution of lung injury through TGF-beta activation and responsiveness, and suggest that EDA-containing fibronectin plays a critical role in tissue fibrogenesis.
| S-EPMC2267338 | biostudies-literature
Project description:Collagen ?1 type XX, which contains fibronectin type III (FN3) repeats involving six FN3 domains (referred to as the FN#1-FN#6 domains), is an unusual member of the fibril-associated collagens with interrupted triple helices (FACIT) subfamily of collagens. The results of standard protein BLAST suggest that the FN3 repeats might contribute to collagen ?1 type XX acting as a cytokine receptor. To date, solution NMR structures of the FN#3, FN#4 and FN#6 domains have been determined. To obtain further structural evidence to understand the relationship between the structure and function of the FN3 repeats from collagen ?1 type XX, the crystal structure of the FN#2 domain from human collagen ?1 type XX (residues Pro386-Pro466; referred to as FN2-HCXX) was solved at 2.5?Å resolution. The crystal structure of FN2-HCXX shows an immunoglobulin-like fold containing a ?-sandwich structure, which is formed by a three-stranded ?-sheet (?1, ?2 and ?5) packed onto a four-stranded ?-sheet (?3, ?4, ?6 and ?7). Two consensus domains, tencon and fibcon, are structural analogues of FN2-HCXX. Fn8, an FN3 domain from human oncofoetal fibronectin, is the closest structural analogue of FN2-HCXX derived from a naturally occurring sequence. Based solely on the structural similarity of FN2-HCXX to other FN3 domains, the detailed functions of FN2-HCXX and the FN3 repeats in collagen ?1 type XX cannot be identified.
| S-EPMC5713675 | biostudies-literature
Project description:Multiple quantitative trait loci (QTLs) for blood pressure (BP) have been detected in rat models of human polygenic hypertension. Great challenges confronting us include molecular identifications of individual QTLs. We first defined the chromosome region harboring C1QTL1 to a segment of 1.9 megabases that carries 9 genes. Among them, we identified the gene encoding the fibronectin type III domain containing 1 protein (Fndc1)/activator of G protein signaling 8 (Ags8) to be the strongest candidate for C1QTL1, since numerous non-synonymous mutations are found. Moreover, the 5' Fndc1/Ags8 putative promoter contains numerous mutations that can account for its differential expression in kidneys and the heart, prominent organs in modulating BP, although the Fndc1/Ags8 protein was not detectable in these organs under our experimental conditions. This work has provided the premier evidence that Fndc1/Ags8 is a novel and strongest candidate gene for C1QTL1 without completely excluding other 8 genes in the C1QTL1-residing interval. If proven true by future in vivo function studies such as single-gene Fndc1/Ags8 congenics, transgenesis or targeted-gene modifications, it might represent a part of the BP genetic architecture that operates in the upstream position distant from the end-phase physiology of BP control, since it activates a Gbetagamma component in a signaling pathway. Its functional role could validate the concept that a QTL in itself can influence BP 'indirectly' by regulating other genes downstream in a pathway. The elucidation of the mechanisms initiated by Fndc/Ags8 variations will reveal novel insights into the BP modulation via a regulatory hierarchy.
| S-EPMC4827815 | biostudies-literature
Project description:Tenascin C (TNC) is an extracellular matrix protein that is upregulated during development as well as tissue remodeling. TNC is comprised of multiple independent folding domains, including 15 fibronectin type III-like (TNCIII) domains. The fifth TNCIII domain (TNCIII5) has previously been shown to bind heparin. Our group has shown that the heparin-binding fibronectin type III domains of fibronectin (FNIII), specifically FNIII12-14, possess affinity towards a large number of growth factors. Here, we show that TNCIII5 binds growth factors promiscuously and with high affinity. We produced recombinant fragments of TNC representing the first five TNCIII repeats (TNCIII1-5), as well as subdomains, including TNCIII5, to study interactions with various growth factors. Multiple growth factors of the platelet-derived growth factor (PDGF) family, the fibroblast growth factor (FGF) family, the transforming growth factor beta (TGF-?) superfamily, the insulin-like growth factor binding proteins (IGF-BPs), and neurotrophins were found to bind with high affinity to this region of TNC, specifically to TNCIII5. Surface plasmon resonance was performed to analyze the kinetics of binding of TNCIII1-5 with TGF-?1, PDGF-BB, NT-3, and FGF-2. The promiscuous yet high affinity of TNC for a wide array of growth factors, mediated mainly by TNCIII5, may play a role in multiple physiological and pathological processes involving TNC.
| S-EPMC3630135 | biostudies-literature
Project description:Tankyrase 1 (TNKS1; a.k.a. ARTD5) and tankyrase 2 (TNKS2; a.k.a ARTD6) are highly homologous poly(ADP-ribose) polymerases (PARPs) that function in a wide variety of cellular processes including Wnt signaling, Src signaling, Akt signaling, Glut4 vesicle translocation, telomere length regulation, and centriole and spindle pole maturation. Tankyrase proteins include a sterile alpha motif (SAM) domain that undergoes oligomerization in vitro and in vivo. However, the SAM domains of TNKS1 and TNKS2 have not been structurally characterized and the mode of oligomerization is not yet defined. Here we model the SAM domain-mediated oligomerization of tankyrase. The structural model, supported by mutagenesis and NMR analysis, demonstrates a helical, homotypic head-to-tail polymer that facilitates TNKS self-association. Furthermore, we show that TNKS1 and TNKS2 can form (TNKS1 SAM-TNKS2 SAM) hetero-oligomeric structures mediated by their SAM domains. Though wild-type tankyrase proteins have very low solubility, model-based mutations of the SAM oligomerization interface residues allowed us to obtain soluble TNKS proteins. These structural insights will be invaluable for the functional and biophysical characterization of TNKS1/2, including the role of TNKS oligomerization in protein poly(ADP-ribosyl)ation (PARylation) and PARylation-dependent ubiquitylation.
| S-EPMC5338228 | biostudies-literature
Project description:Anastellin is a small recombinant fragment derived from the extracellular matrix protein fibronectin; it comprises the first type III (FN3) domain without the two N-terminal ?-strands. It inhibits angiogenesis, tumor growth, and metastasis in mouse models and requires endogenous fibronectin for its in vivo anti-angiogenic activity. It binds to fibronectin in vitro and converts the soluble protein to insoluble fibrils that structurally and functionally resemble fibronectin fibrils deposited in the extracellular matrix by cells. Anastellin binds to several FN3 domains in fibronectin, but how it interacts with these domains and why the interactions lead to aggregation of fibronectin are not well understood. In this work, we investigated the interaction between anastellin and the third FN3 domain (3FN3) from fibronectin. We show that anastellin binds with high affinity to a peptide comprising the two N-terminal ?-strands from 3FN3, and we present here the structure of the resulting complex. The peptide and anastellin form a composite FN3 domain, with the two N-terminal ?-strands from 3FN3 bound in place of the two ?-strands that are missing in anastellin. We also demonstrate using disulfide cross-linking that a similar interaction involving the two N-terminal ?-strands of 3FN3 occurs when intact 3FN3 binds to anastellin. 3FN3 adopts a compact globular fold in solution, and to interact with anastellin in a manner consistent with our data, it has to open up and expose a ?-strand edge that is not accessible in the context of the folded domain.
| S-EPMC5612498 | biostudies-literature