Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

In situ observation of graphene sublimation and multi-layer edge reconstructions.

ABSTRACT: We induced sublimation of suspended few-layer graphene by in situ Joule-heating inside a transmission electron microscope. The graphene sublimation fronts consisted of mostly {1100} zigzag edges. Under appropriate conditions, a fractal-like "coastline" morphology was observed. Extensive multiple-layer reconstructions at the graphene edges led to the formation of unique carbon nanostructures, such as sp(2)-bonded bilayer edges (BLEs) and nanotubes connected to BLEs. Flat fullerenes/nanopods and nanotubes tunneling multiple layers of graphene sheets were also observed. Remarkably, >99% of the graphene edges observed during sublimation are BLEs rather than monolayer edges (MLEs), indicating that BLEs are the stable edges in graphene at high temperatures. We reproduced the "coastline" sublimation morphologies by kinetic Monte Carlo (kMC) simulations. The simulation revealed geometrical and topological features unique to quasi-2-dimensional (2D) graphene sublimation and reconstructions. These reconstructions were enabled by bending, which cannot occur in first-order phase transformations of 3D bulk materials. These results indicate that substrate of multiple-layer graphene can offer unique opportunities for tailoring carbon-based nanostructures and engineering novel nano-devices with complex topologies.

SUBMITTER: Huang JY

PROVIDER: S-EPMC2696552 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

In situ observation of step-edge in-plane growth of graphene in a STEM.

Project description:It is extremely difficult to control the growth orientation of the graphene layer in comparison to Si or III-V semiconductors. Here we report a direct observation of graphene growth and domain boundary formation in a scanning transmission electron microscope, with residual hydrocarbon in the microscope chamber being used as the carbon source for in-plane graphene growth at the step-edge of bilayer graphene substrate. We show that the orientation of the growth is strongly influenced by the step-edge structure and areas grown from a reconstructed 5-7 edge are rotated by 30° with respect to the mother layer. Furthermore, single heteroatoms like Si may act as catalytic active sites for the step-edge growth. The findings provide an insight into the mechanism of graphene growth and defect reconstruction that can be used to tailor carbon nanostructures with desired properties.

| S-EPMC4059939 | biostudies-literature

Observation of edge solitons in photonic graphene.

Project description:Edge states emerge in diverse areas of science, offering promising opportunities for the development of future electronic or optoelectronic devices, sound and light propagation control in acoustics and photonics. Previous experiments on edge states in photonics were carried out mostly in linear regimes, but the current belief is that nonlinearity introduces more striking features into physics of edge states, leading to the formation of edge solitons, optical isolation, making possible stable lasing in such states, to name a few. Here we report the observation of edge solitons at the zigzag edge of a reconfigurable photonic graphene lattice created via the effect of electromagnetically induced transparency in an atomic vapor cell with controllable nonlinearity. To obtain edge solitons, Raman gain is introduced to compensate strong absorption experienced by the edge state during propagation. Our observations may open the way for future experimental exploration of topological photonics on this nonlinear, reconfigurable platform.

| S-EPMC7171198 | biostudies-literature

In Situ Atomic-Scale Observation of Kinetic Pathways of Sublimation in Silver Nanoparticles.

Project description:Uncovering kinetics of sublimation atomically is critical to understanding both natural phenomena and advanced manufacturing technologies. Here, direct in situ atomic-scale observations to understand the effects of size, surface, and defects in the sublimation process of supported silver nanoparticles upon heating within an aberration-corrected transmission electron microscopy are conducted. Atomic-scale evidence to sublimation and atomic rearrangement in small Ag nanoparticles during heating is provided, and it is demonstrated that the sublimation-induced stable surfaces in the particles with a size smaller than ≈30 nm are {111} and {100} planes. The role of surface energy and defects in the uniform and nonuniform sublimation pathways at the atomic scale is also revealed, and it is found that the nanoparticles with low surface energy tend to undergo a uniform sublimation pathway, while those with high surface energy or five-fold twin grain boundary proceed via a nonuniform sublimation pathway. Further dynamic analysis unravels a critical size of ≈8 nm for the transformation from linear to nonlinear sublimation rates in the two pathways. These findings demonstrate that the size, shape, and defects are of paramount importance for the sublimation dynamics in the first-order phase transformation, helping to advance the general understanding of many technological applications.

| S-EPMC6468973 | biostudies-literature

Observation of chiral edge states in gapped nanomechanical graphene.

Project description:Emerging in diverse areas of physics, edge states have been exploited as an efficient strategy of manipulating electrons, photons, and phonons for next-generation hybrid electro-optomechanical circuits. Among various edge states, gapless chiral edge states harnessing quantum spin/valley Hall effects in graphene or graphene-like materials are especially unique. Here, we report on an experimental demonstration of chiral edge states in gapped "nanomechanical graphene"-a honeycomb lattice of free-standing silicon nitride nanomechanical membranes with broken spatial inversion symmetry. These chiral edge states can emerge from the conventional flat-band edge states by tuning the on-site boundary potentials. We experimentally demonstrated that they are backscattering-immune against sharp bends and exhibit the "valley-momentum locking" effect. We further realized smooth transition between the chiral edge states and the well-known valley kink states. Our results open the door to experimental investigation of exotic graphene-related physics in the very-high-frequency integrated nanomechanical systems.

| S-EPMC7787500 | biostudies-literature

Observation of sublimation of ice using terahertz spectroscopy.

Project description:Although many studies have investigated the phase change of water, few have focused on the sublimation of ice. This study revealed that ice sublimation can be observed using terahertz (THz) spectroscopy. From measurements in the range of 210-270 K, the sublimation was observed over the entire temperature range and the rate of sublimation was increased proportionally with temperature. Particularly on a time scale of a few hundred minutes, the sublimation progresses visibly above 250 K. Above a certain temperature, the absorption coefficient increased during sublimation. These findings suggest that an interesting phenomenon may occur in the phase change of water at sub-zero temperatures, indicating that THz spectroscopy would be useful for measuring water and ice.

| S-EPMC7540754 | biostudies-literature

Electrochemistry at the edge of a single graphene layer in a nanopore.

Project description:We study the electrochemistry of single layer graphene edges using a nanopore-based structure consisting of stacked graphene and Al(2)O(3) dielectric layers. Nanopores, with diameters ranging from 5 to 20 nm, are formed by an electron beam sculpting process on the stacked layers. This leads to a unique edge structure which, along with the atomically thin nature of the embedded graphene electrode, demonstrates electrochemical current densities as high as 1.2 × 10(4) A/cm(2). The graphene edge embedded structure offers a unique capability to study the electrochemical exchange at an individual graphene edge, isolated from the basal plane electrochemical activity. We also report ionic current modulation in the nanopore by biasing the embedded graphene terminal with respect to the electrodes in the fluid. The high electrochemical specific current density for a graphene nanopore-based device can have many applications in sensitive chemical and biological sensing, and energy storage devices.

| S-EPMC3551991 | biostudies-literature

The edge- and basal-plane-specific electrochemistry of a single-layer graphene sheet.

Project description:Graphene has a unique atom-thick two-dimensional structure and excellent properties, making it attractive for a variety of electrochemical applications, including electrosynthesis, electrochemical sensors or electrocatalysis, and energy conversion and storage. However, the electrochemistry of single-layer graphene has not yet been well understood, possibly due to the technical difficulties in handling individual graphene sheet. Here, we report the electrochemical behavior at single-layer graphene-based electrodes, comparing the basal plane of graphene to its edge. The graphene edge showed 4 orders of magnitude higher specific capacitance, much faster electron transfer rate and stronger electrocatalytic activity than those of graphene basal plane. A convergent diffusion effect was observed at the sub-nanometer thick graphene edge-electrode to accelerate the electrochemical reactions. Coupling with the high conductivity of a high-quality graphene basal plane, graphene edge is an ideal electrode for electrocatalysis and for the storage of capacitive charges.

| S-EPMC3727060 | biostudies-literature

In-situ atomic level observation of the strain response of graphene lattice.

Project description:Strain is inevitable in two-dimensional (2D) materials, regardless of whether the film is suspended or supported. However, the direct measurement of strain response at the atomic scale is challenging due to the difficulties of maintaining both flexibility and mechanical stability at low temperature under UHV conditions. In this work, we have implemented a compact nanoindentation system with a size of [Formula: see text] 160 mm[Formula: see text] [Formula: see text] 5.2 mm in a scanning tunneling microscope (STM) sample holder, which enables the reversible control of strain and gate electric field. A combination of gearbox and piezoelectric actuator allowed us to modulate the depth of the indentation continuously with nanometer precision. The 2D materials were transferred onto the polyimide film. Pd clamp was used to enhance the strain transfer from the polyimide from to the 2D layers. Using this unique technique, strain response of graphene lattice were observed at atomic precision. In the relaxed graphene, strain is induced mainly by local curvature. However, in the strained graphene with tented structure, the lattice parameters become more sensitive to the indentor height change and stretching strain is increased additionally. Moreover, the gate controllability is confirmed by measuring the dependence of the STM tip height on gate voltage.

| S-EPMC9922254 | biostudies-literature

Adsorption-Induced Expansion of Graphene Oxide Frameworks: Observation by in Situ Neutron Diffraction.

Project description:We have investigated adsorption-induced deformation in graphene oxide framework materials (GOFs) using neutron diffraction at sample pressures up to 140 bar. GOFs, made by the solvothermal reaction of graphite oxide and benzene-1,4-diboronic acid, are a suitable candidate for deformation studies due to their narrow (?1 nm), monodispersed, slit-shaped pores whose width can be measured by diffraction techniques. We have observed, in situ, a monotonic expansion of the slit width with increasing pressure upon adsorption of xenon, methane, and hydrogen under supercritical conditions. The expansion of ?4% observed for xenon at a pressure of 48 bar is the largest deformation yet reported for supercritical adsorption on a carbonaceous material. We find that the expansion of the three gases can be mapped onto a common curve based solely on their Lennard-Jones parameters, in a manner similar to a law of corresponding states.

| S-EPMC6854554 | biostudies-literature

Durable Corrosion Resistance of Copper Due to Multi-Layer Graphene.

Project description:Ultra-thin graphene coating has been reported to provide considerable resistance against corrosion during short-term exposures, however, there is great variability in the corrosion resistance due to graphene coating in different studies. It may be possible to overcome the problem of hampered corrosion protection ability of graphene that is caused due to defective single layer graphene by applying multilayer graphene. Systematic electrochemical characterization showed that the multilayer graphene coating developed in the study provided significant corrosion resistance in a chloride solution and the corrosion resistance was sustained for long durations (~400 h), which is attributed to the multilayer graphene.

| S-EPMC5666918 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data