QMEAN server for protein model quality estimation.
Ontology highlight
ABSTRACT:
SUBMITTER: Benkert P
PROVIDER: S-EPMC2703985 | biostudies-literature | 2009 Jul
REPOSITORIES: biostudies-literature
Publications
QMEAN server for protein model quality estimation.
Benkert Pascal P Künzli Michael M Schwede Torsten T
Nucleic acids research 20090508 Web Server issue
Model quality estimation is an essential component of protein structure prediction, since ultimately the accuracy of a model determines its usefulness for specific applications. Usually, in the course of protein structure prediction a set of alternative models is produced, from which subsequently the most accurate model has to be selected. The QMEAN server provides access to two scoring functions successfully tested at the eighth round of the community-wide blind test experiment CASP. The user c ...[more]
Similar Datasets
Project description:The estimation of
| S-EPMC9301944 | biostudies-literature
Project description:Methods that reliably estimate the likely similarity between the predicted and native structures of proteins have become essential for driving the acceptance and adoption of three-dimensional protein models by life scientists. ModFOLD6 is the latest version of our leading resource for Estimates of Model Accuracy (EMA), which uses a pioneering hybrid quasi-single model approach. The ModFOLD6 server integrates scores from three pure-single model methods and three quasi-single model methods using a neural network to estimate local quality scores. Additionally, the server provides three options for producing global score estimates, depending on the requirements of the user: (i) ModFOLD6_rank, which is optimized for ranking/selection, (ii) ModFOLD6_cor, which is optimized for correlations of predicted and observed scores and (iii) ModFOLD6 global for balanced performance. The ModFOLD6 methods rank among the top few for EMA, according to independent blind testing by the CASP12 assessors. The ModFOLD6 server is also continuously automatically evaluated as part of the CAMEO project, where significant performance gains have been observed compared to our previous server and other publicly available servers. The ModFOLD6 server is freely available at: http://www.reading.ac.uk/bioinf/ModFOLD/.
| S-EPMC5570241 | biostudies-literature
Project description:In CASP15, there was a greater emphasis on multimeric modeling than in previous experiments, with assembly structures nearly doubling in number (41 up from 22) since the previous round. CASP15 also included a new estimation of model accuracy (EMA) category in recognition of the importance of objective quality assessment (QA) for quaternary structure models. ModFOLDdock is a multimeric model QA server developed by the McGuffin group at the University of Reading, which brings together a range of single-model, clustering, and deep learning methods to form a consensus of approaches. For CASP15, three variants of ModFOLDdock were developed to optimize for the different facets of the quality estimation problem. The standard ModFOLDdock variant produced predicted scores optimized for positive linear correlations with the observed scores. The ModFOLDdockR variant produced predicted scores optimized for ranking, that is, the top-ranked models have the highest accuracy. In addition, the ModFOLDdockS variant used a quasi-single model approach to score each model on an individual basis. The scores from all three variants achieved strongly positive Pearson correlation coefficients with the CASP observed scores (oligo-lDDT) in excess of 0.70, which were maintained across both homomeric and heteromeric model populations. In addition, at least one of the ModFOLDdock variants was consistently ranked in the top two methods across all three EMA categories. Specifically, for overall global fold prediction accuracy, ModFOLDdock placed second and ModFOLDdockR placed third; for overall interface quality prediction accuracy, ModFOLDdockR, ModFOLDdock, and ModFOLDdockS were placed above all other predictor methods, and ModFOLDdockR and ModFOLDdockS were placed second and third respectively for individual residue confidence scores. The ModFOLDdock server is available at: https://www.reading.ac.uk/bioinf/ModFOLDdock/. ModFOLDdock is also available as part of the MultiFOLD docker package: https://hub.docker.com/r/mcguffin/multifold.
| S-EPMC10952711 | biostudies-literature
Project description:MOTIVATION:Methods that estimate the quality of a 3D protein structure model in absence of an experimental reference structure are crucial to determine a model's utility and potential applications. Single model methods assess individual models whereas consensus methods require an ensemble of models as input. In this work, we extend the single model composite score QMEAN that employs statistical potentials of mean force and agreement terms by introducing a consensus-based distance constraint (DisCo) score. RESULTS:DisCo exploits distance distributions from experimentally determined protein structures that are homologous to the model being assessed. Feed-forward neural networks are trained to adaptively weigh contributions by the multi-template DisCo score and classical single model QMEAN parameters. The result is the composite score QMEANDisCo, which combines the accuracy of consensus methods with the broad applicability of single model approaches. We also demonstrate that, despite being the de-facto standard for structure prediction benchmarking, CASP models are not the ideal data source to train predictive methods for model quality estimation. For performance assessment, QMEANDisCo is continuously benchmarked within the CAMEO project and participated in CASP13. For both, it ranks among the top performers and excels with low response times. AVAILABILITY AND IMPLEMENTATION:QMEANDisCo is available as web-server at https://swissmodel.expasy.org/qmean. The source code can be downloaded from https://git.scicore.unibas.ch/schwede/QMEAN. SUPPLEMENTARY INFORMATION:Supplementary data are available at Bioinformatics online.
| S-EPMC7075525 | biostudies-literature
Project description:In protein tertiary structure prediction, model quality assessment programs (MQAPs) are often used to select the final structural models from a pool of candidate models generated by multiple templates and prediction methods. The 3-dimensional convolutional neural network (3DCNN) is an expansion of the 2DCNN and has been applied in several fields, including object recognition. The 3DCNN is also used for MQA tasks, but the performance is low due to several technical limitations related to protein tertiary structures, such as orientation alignment. We proposed a novel single-model MQA method based on local structure quality evaluation using a deep neural network containing 3DCNN layers. The proposed method first assesses the quality of local structures for each residue and then evaluates the quality of whole structures by integrating estimated local qualities. We analyzed the model using the CASP11, CASP12, and 3D-Robot datasets and compared the performance of the model with that of the previous 3DCNN method based on whole protein structures. The proposed method showed a significant improvement compared to the previous 3DCNN method for multiple evaluation measures. We also compared the proposed method to other state-of-the-art methods. Our method showed better performance than the previous 3DCNN-based method and comparable accuracy as the current best single-model methods; particularly, in CASP11 stage2, our method showed a Pearson coefficient of 0.486, which was better than those of the best single-model methods (0.366-0.405). A standalone version of the proposed method and data files are available at https://github.com/ishidalab-titech/3DCNN_MQA.
| S-EPMC6728020 | biostudies-literature
Project description:Computational models of protein structure are usually inaccurate and exhibit significant deviations from the true structure. The utility of models depends on the degree of these deviations. A number of predictive methods have been developed to discriminate between the globally incorrect and approximately correct models. However, only a few methods predict correctness of different parts of computational models. Several Model Quality Assessment Programs (MQAPs) have been developed to detect local inaccuracies in unrefined crystallographic models, but it is not known if they are useful for computational models, which usually exhibit different and much more severe errors.The ability to identify local errors in models was tested for eight MQAPs: VERIFY3D, PROSA, BALA, ANOLEA, PROVE, TUNE, REFINER, PROQRES on 8251 models from the CASP-5 and CASP-6 experiments, by calculating the Spearman's rank correlation coefficients between per-residue scores of these methods and local deviations between C-alpha atoms in the models vs. experimental structures. As a reference, we calculated the value of correlation between the local deviations and trivial features that can be calculated for each residue directly from the models, i.e. solvent accessibility, depth in the structure, and the number of local and non-local neighbours. We found that absolute correlations of scores returned by the MQAPs and local deviations were poor for all methods. In addition, scores of PROQRES and several other MQAPs strongly correlate with 'trivial' features. Therefore, we developed MetaMQAP, a meta-predictor based on a multivariate regression model, which uses scores of the above-mentioned methods, but in which trivial parameters are controlled. MetaMQAP predicts the absolute deviation (in Angströms) of individual C-alpha atoms between the model and the unknown true structure as well as global deviations (expressed as root mean square deviation and GDT_TS scores). Local model accuracy predicted by MetaMQAP shows an impressive correlation coefficient of 0.7 with true deviations from native structures, a significant improvement over all constituent primary MQAP scores. The global MetaMQAP score is correlated with model GDT_TS on the level of 0.89.Finally, we compared our method with the MQAPs that scored best in the 7th edition of CASP, using CASP7 server models (not included in the MetaMQAP training set) as the test data. In our benchmark, MetaMQAP is outperformed only by PCONS6 and method QA_556 - methods that require comparison of multiple alternative models and score each of them depending on its similarity to other models. MetaMQAP is however the best among methods capable of evaluating just single models. We implemented the MetaMQAP as a web server available for free use by all academic users at the URL https://genesilico.pl/toolkit/
| S-EPMC2573893 | biostudies-literature
Project description:BackgroundAccurate prediction of protein tertiary structures is highly desired as the knowledge of protein structures provides invaluable insights into protein functions. We have designed two approaches to protein structure prediction, including a template-based modeling approach (called ProALIGN) and an ab initio prediction approach (called ProFOLD). Briefly speaking, ProALIGN aligns a target protein with templates through exploiting the patterns of context-specific alignment motifs and then builds the final structure with reference to the homologous templates. In contrast, ProFOLD uses an end-to-end neural network to estimate inter-residue distances of target proteins and builds structures that satisfy these distance constraints. These two approaches emphasize different characteristics of target proteins: ProALIGN exploits structure information of homologous templates of target proteins while ProFOLD exploits the co-evolutionary information carried by homologous protein sequences. Recent progress has shown that the combination of template-based modeling and ab initio approaches is promising.ResultsIn the study, we present FALCON2, a web server that integrates ProALIGN and ProFOLD to provide high-quality protein structure prediction service. For a target protein, FALCON2 executes ProALIGN and ProFOLD simultaneously to predict possible structures and selects the most likely one as the final prediction result. We evaluated FALCON2 on widely-used benchmarks, including 104 CASP13 (the 13th Critical Assessment of protein Structure Prediction) targets and 91 CASP14 targets. In-depth examination suggests that when high-quality templates are available, ProALIGN is superior to ProFOLD and in other cases, ProFOLD shows better performance. By integrating these two approaches with different emphasis, FALCON2 server outperforms the two individual approaches and also achieves state-of-the-art performance compared with existing approaches.ConclusionsBy integrating template-based modeling and ab initio approaches, FALCON2 provides an easy-to-use and high-quality protein structure prediction service for the community and we expect it to enable insights into a deep understanding of protein functions.
| S-EPMC8444573 | biostudies-literature
Project description:Crystallographic R work and R free values, which are measures of the ability of the models of macromolecular structures to explain the crystallographic data on which they are based, are often used to assess structure quality. It is widely known, and confirmed here that both are sensitive to the methods used to compute them, and can be manipulated to improve the apparent quality of the model. As an alternative it is proposed here that the quality of crystallographic models should be assessed using a global goodness-of-fit metric RO2A /R work where RO2A is the number of reflections used for refinement divided by the number of nonhydrogen atoms in the structure, and R work is the working R-factor of the refined structure. Also, analysis of structures in the Protein Data Bank suggests that many data sets have been truncated at high resolution, thereby improving the R-factor statistics. To discourage this practice, it is proposed that the resolution of a dataset be defined as the resolution of the shell of data where <I/σI > falls to 1. The proposed goodness-of-fit metric encourages investigators to use all the data available rather than a truncated subset.
| S-EPMC4420517 | biostudies-literature
Project description:BackgroundThe rational design of modified proteins with controlled stability is of extreme importance in a whole range of applications, notably in the biotechnological and environmental areas, where proteins are used for their catalytic or other functional activities. Future breakthroughs in medical research may also be expected from an improved understanding of the effect of naturally occurring disease-causing mutations on the molecular level.ResultsPoPMuSiC-2.1 is a web server that predicts the thermodynamic stability changes caused by single site mutations in proteins, using a linear combination of statistical potentials whose coefficients depend on the solvent accessibility of the mutated residue. PoPMuSiC presents good prediction performances (correlation coefficient of 0.8 between predicted and measured stability changes, in cross validation, after exclusion of 10% outliers). It is moreover very fast, allowing the prediction of the stability changes resulting from all possible mutations in a medium size protein in less than a minute. This unique functionality is user-friendly implemented in PoPMuSiC and is particularly easy to exploit. Another new functionality of our server concerns the estimation of the optimality of each amino acid in the sequence, with respect to the stability of the structure. It may be used to detect structural weaknesses, i.e. clusters of non-optimal residues, which represent particularly interesting sites for introducing targeted mutations. This sequence optimality data is also expected to have significant implications in the prediction and the analysis of particular structural or functional protein regions. To illustrate the interest of this new functionality, we apply it to a dataset of known catalytic sites, and show that a much larger than average concentration of structural weaknesses is detected, quantifying how these sites have been optimized for function rather than stability.ConclusionThe freely available PoPMuSiC-2.1 web server is highly useful for identifying very rapidly a list of possibly relevant mutations with the desired stability properties, on which subsequent experimental studies can be focused. It can also be used to detect sequence regions corresponding to structural weaknesses, which could be functionally important or structurally delicate regions, with obvious applications in rational protein design.
| S-EPMC3113940 | biostudies-literature
Project description:UnlabelledRichness is defined as the number of distinct species or classes in a sample or population. Although richness estimation is an important practice, it requires mathematical and computational methods that are challenging to understand and implement. We have developed a web server, RICHness ESTimator (RICHEST), which implements three non-parametric statistical methods for richness estimation. Its user-friendly web interface allows users to analyze and compare their data conveniently over the web.AvailabilityA web server hosting RICHEST is accessible at http://richest.cgb.indiana.edu/cgi-bin/index.cgi and the software is freely available for local installations.
| S-EPMC2655047 | biostudies-literature