A comparative analysis of DNA barcode microarray feature size.
Ontology highlight
ABSTRACT: Background
Microarrays are an invaluable tool in many modern genomic studies. It is generally perceived that decreasing the size of microarray features leads to arrays with higher resolution (due to greater feature density), but this increase in resolution can compromise sensitivity.Results
We demonstrate that barcode microarrays with smaller features are equally capable of detecting variation in DNA barcode intensity when compared to larger feature sizes within a specific microarray platform. The barcodes used in this study are the well-characterized set derived from the Yeast KnockOut (YKO) collection used for screens of pooled yeast (Saccharomyces cerevisiae) deletion mutants. We treated these pools with the glycosylation inhibitor tunicamycin as a test compound. Three generations of barcode microarrays at 30, 8 and 5 microm features sizes independently identified the primary target of tunicamycin to be ALG7.Conclusion
We show that the data obtained with 5 microm feature size is of comparable quality to the 30 microm size and propose that further shrinking of features could yield barcode microarrays with equal or greater resolving power and, more importantly, higher density.
SUBMITTER: Ammar R
PROVIDER: S-EPMC2765990 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Lung carcinoma is the most common and aggressive malignant tumor with poor clinical outcome. Identification of new marker of lung cancer is essential for the diagnosis and prognosis of the disease. To identify differentially expressed genes (DEGs) and find associated pathways that may function as targets of lung cancer. Gene expression profiling of GSE40791 were downloaded from GEO (Gene Expression Omnibus), including 100 normal specimens and 94 lung cancer samples. The DEGs were screened out by LIMMA package in R language. Besides, novel genes associated with lung cancer were identified by co-expression analysis. Then, GO enrichment and transcription binding site analysis were performed on these DEGs, and novel genes were predicted using DAVID. Finally, PPI network was constructed by String software in order to get the hub codes involved in cancer carcinoma. A total of 541 DEGs were filtered out between normal samples and patients with lung carcinoma, including 155 up-regulated genes and 386 down-regulated genes. Additionally, nine novel genes, CA4, CDC20, CHRDL1, DLGAP5, EMCN, GPM6A, NUSAP1, S1PR1 and TCF21, were figured out. The transcription biding site analysis showed that these genes were regulated by LHX3, HNF3B, CDP, HFH1, FOXO4, STAT, SOX5, MEF2, FOXO3 and SRY. Hub codes as BUB1B, MAD2L and TOP2A may play as target genes in lung carcinoma in the result of PPI network analysis. Newly predicted genes and hub codes can perform as target genes for diagnose and clinical therapy of lung cancer.
| S-EPMC4612811 | biostudies-literature
Project description:To screen differentially expressed genes (DEGs) of Osteosarcoma (OS) by using the microarray expression profiles of tissues of normal person and patients with OS for early diagnosis and effective treatment of OS. We downloaded the gene expression profile of GES16088 from Gene Expression Omnibus database, including twenty samples from fourteen patients diagnosed with osteosarcoma and six normal samples as control groups. We identified the DEGs by Affy package in R language. Bioinformatic methods were used for further analysis of the screened DEGs. Firstly, cluster analysis was performed on the selected DEGs for comparison of the expression degree. After protein-protein interaction (PPI) network of differentially expressed genes was constructed by STRING, we analyzed gene functions with DAVID and WebGestalt. Compared with the control, we screened three distinctly up-regulated genes. These DEGs had close relationship with transmission signaling pathway, organ and system development. The up-regulated gene COL was the most representative genes among the DEGs. The screened DEGs have a great significance on studying mechanism of osteosarcoma. It might distinguish normal and pathological tissues of OS and thus become target genes for monitoring, diagnosis and treatment of the OS. It has the potential to use in clinic.
| S-EPMC4509196 | biostudies-literature
Project description:BackgroundOsteoporosis affects 200 million people worldwide and places an enormous economic burden on society. We aim to identify the feature genes that are related to osteoprotegerin in osteoporosis and to perform function analysis with DNA microarray from human bone marrow.MethodsWe downloaded the gene expression profile GSE35957 from Gene Expression Omnibus database including nine gene chips from bone marrow mesenchymal stem cells of five osteoporotic and four non-osteoporotic subjects. The differentially expressed genes between normal and disease samples were identified by LIMMA package in R language. The interactions among the osteoprotegerin gene (OPG) and differentially expressed genes were searched and visualized by Cytoscape. MCODE and Bingo were used to perform module analysis. Finally, GENECODIS was used to obtain enriched pathways of genes in an interaction network.ResultsA total of 656 genes were identified as differentially expressed genes between osteoporotic and non-osteoporotic samples. IL17RC, COL1A1, and ESR1 were identified to interact with OPG directly from the protein-protein interaction network. A module containing ERS1 was screened out, and this module was most significantly enriched in organ development. Pathway enrichment analysis suggested genes in the interaction network were related to focal adhesion.ConclusionsThe expression pattern of IL17RC, COL1A1, and ESR1 can be useful in osteoporosis detection, which may help in identifying those populations at high risk for osteoporosis, and in directing treatment of osteoporosis.
| S-EPMC3735399 | biostudies-literature
Project description:The advent of DNA microarray technology and the sequencing of multiple vertebrate genomes has provided a unique opportunity for the integration of comparative genomics with high-throughput gene expression analysis. Here we describe the conserved transcription factor binding site (CONFAC) software that enables the high-throughput identification of conserved transcription factor binding sites (TFBSs) in the regulatory regions of hundreds of genes at a time (http://morenolab.whitehead.emory.edu/cgi-bin/confac/login.pl). The CONFAC software compares non-coding regulatory sequences between human and mouse genomes to enable identification of conserved TFBSs that are significantly enriched in promoters of gene clusters from microarray analyses compared to sets of unchanging control genes using a Mann-Whitney U-test. Analysis of random gene sets demonstrated that using our approach, over 98% of TFBSs had false positive rates below 5%. As a proof-of-principle, we have validated the CONFAC software using gene sets from four separate microarray studies and identified TFBSs known to be functionally important for regulation of each of the four gene sets.
| S-EPMC441491 | biostudies-literature
Project description:Feature selection from DNA microarray data is a major challenge due to high dimensionality in expression data. The number of samples in the microarray data set is much smaller compared to the number of genes. Hence the data is improper to be used as the training set of a classifier. Therefore it is important to select features prior to training the classifier. It should be noted that only a small subset of genes from the data set exhibits a strong correlation with the class. This is because finding the relevant genes from the data set is often non-trivial. Thus there is a need to develop robust yet reliable methods for gene finding in expression data. We describe the use of several hybrid feature selection approaches for gene finding in expression data. These approaches include filtering (filter out the best genes from the data set) and wrapper (best subset of genes from the data set) phases. The methods use information gain (IG) and Pearson Product Moment Correlation (PPMC) as the filtering parameters and biogeography based optimization (BBO) as the wrapper approach. K nearest neighbour algorithm (KNN) and back propagation neural network are used for evaluating the fitness of gene subsets during feature selection. Our analysis shows that an impressive performance is provided by the IG-BBO-KNN combination in different data sets with high accuracy (>90%) and low error rate.
| S-EPMC3796884 | biostudies-literature
Project description:ObjectiveWe aimed to screen differentially expressed genes (DEGs) of ovarian surface epithelia in order to provide beneficial help for early diagnosis and treatment of ovarian cancer with DNA microarrays.MethodsWe extracted the microarray expression profile GSE14407 from Gene Expression Omnibus database which conducted gene expression profiling analysis of 12 ovarian surface epithelia (OSE) and 12 laser capture microdissected serous ovarian cancer epithelia (CEPI) samples. The DEGs between OSE and CEPI were identified by Limma package of R language. Cluster analysis was employed to compare the differences of gene expression patterns between OSE and CEPI. Furthermore, DEGs were analyzed with Functional classification tool, GenMAPP software and GENECODIS.ResultsWe identified 1229 DEGs including 592 down-regulated genes and 637 up-regulated genes. Pathway analysis showed that cell cycle was the most significant pathway and the DEGs related with cell cycle were almost up-regulated. Module mining analysis showed that the up-regulated DEGs were related with signal transduction while the down-regulated DEGs were related with lipid metabolism pathway and cytoskeletal structure.ConclusionThe genes related with cell cycle, lipid metabolism and cytoskeletal structure may be the treatment targets for ovarian cancer.
| S-EPMC3683326 | biostudies-literature
Project description:BackgroundThe goal of DNA barcoding is to develop a species-specific sequence library for all eukaryotes. A 650 bp fragment of the cytochrome c oxidase 1 (CO1) gene has been used successfully for species-level identification in several animal groups. It may be difficult in practice, however, to retrieve a 650 bp fragment from archival specimens, (because of DNA degradation) or from environmental samples (where universal primers are needed).ResultsWe used a bioinformatics analysis using all CO1 barcode sequences from GenBank and calculated the probability of having species-specific barcodes for varied size fragments. This analysis established the potential of much smaller fragments, mini-barcodes, for identifying unknown specimens. We then developed a universal primer set for the amplification of mini-barcodes. We further successfully tested the utility of this primer set on a comprehensive set of taxa from all major eukaryotic groups as well as archival specimens.ConclusionIn this study we address the important issue of minimum amount of sequence information required for identifying species in DNA barcoding. We establish a novel approach based on a much shorter barcode sequence and demonstrate its effectiveness in archival specimens. This approach will significantly broaden the application of DNA barcoding in biodiversity studies.
| S-EPMC2396642 | biostudies-literature
Project description:We present a quantification method for affinity-based DNA microarrays which is based on the real-time measurements of hybridization kinetics. This method, i.e. real-time DNA microarrays, enhances the detection dynamic range of conventional systems by being impervious to probe saturation in the capturing spots, washing artifacts, microarray spot-to-spot variations, and other signal amplitude-affecting non-idealities. We demonstrate in both theory and practice that the time-constant of target capturing in microarrays, similar to all affinity-based biosensors, is inversely proportional to the concentration of the target analyte, which we subsequently use as the fundamental parameter to estimate the concentration of the analytes. Furthermore, to empirically validate the capabilities of this method in practical applications, we present a FRET-based assay which enables the real-time detection in gene expression DNA microarrays.
| S-EPMC2802827 | biostudies-other
Project description:The nuclear ribosomal internal transcribed spacer (nrITS) region has been widely used in fungal diversity studies. Environmental metabarcoding has increased the importance of the fungal DNA barcode in documenting fungal diversity and distribution. The DNA barcode gap is seen as the difference between intra- and inter-specific pairwise distances in a DNA barcode. The current understanding of the barcode gap in macrofungi is limited, inhibiting the development of best practices in applying the nrITS region toward research on fungal diversity. This study examined the barcode gap using 5146 sequences representing 717 species of macrofungi from eleven genera, eight orders and two phyla in datasets assembled by taxonomic experts. Intra- and inter-specific pairwise distances were measured from sequence and phylogenetic data. The results demonstrate that barcode gaps are influenced by differences in intra- and inter-specific variance in pairwise distances. In terms of DNA barcode behavior, variance is greater in the ITS1 than ITS2, and variance is greater in both relative to the combined nrITS region. Due to the difference in variance, the barcode gaps in the ITS2 region are greater than in the ITS1. Additionally, the taxonomic approach of "splitting" taxa into numerous taxonomic units produces greater barcode gaps when compared to "lumping". The results show variability in the barcode gaps between fungal taxa, demonstrating a need to understand the accuracy of DNA barcoding in quantifying species richness. For taxonomic studies, variability in nrITS sequence data supports the application of multiple molecular markers to corroborate the taxonomic and systematic delineation of species.
| S-EPMC10455624 | biostudies-literature
Project description:The microarray technique has become a standard means in simultaneously examining expression of all genes measured in different circumstances. As microarray data are typically characterized by high dimensional features with a small number of samples, feature selection needs to be incorporated to identify a subset of genes that are meaningful for biological interpretation and accountable for the sample variation. In this article, we present a simple, yet effective feature selection framework suitable for two-dimensional microarray data. Our correlation-based, nonparametric approach allows compact representation of class-specific properties with a small number of genes. We evaluated our method using publicly available experimental data and obtained favorable results.
| S-EPMC2951666 | biostudies-literature