Dataset Information

Pullout strength of suture anchors: effect of mechanical properties of trabecular bone.

ABSTRACT: This study investigated the relationships between trabecular microstructure and elastic modulus, compressive strength, and suture anchor pullout strength. Twelve fresh-frozen humeri underwent mechanical testing followed by micro-computed tomography (microCT). Either compression testing of cylindrical bone samples or pullout testing using an Arthrex 5mm Corkscrew was performed in synthetic sawbone or at specific locations in the humerus such as the greater tuberosity, lesser tuberosity, and humeral head. Synthetic sawbone underwent identical mechanical testing and microCT analysis. Bone volume fraction (BVF), structural model index (SMI), trabecular thickness (TbTh), trabecular spacing (TbSp), trabecular number (TbN), and connectivity density were compared against modulus, compressive strength, and pullout strength in both materials. In cadaveric bone, modulus showed correlations to all of the microstructural properties, while compressive and pullout strength were only correlated to BVF, SMI, and TbSp. The microstructure of synthetic bone differed from cadaveric bone as SMI and TbTh showed little variation across the densities tested. Therefore, SMI and TbTh were the only microstructural properties that did not show correlations to the mechanical properties tested in synthetic bone. This study helps identify key microstructure-property relationships in cadaveric and synthetic bone as well as illustrate the similarities and differences between cadaveric and synthetic bone as biomechanical test materials.

SUBMITTER: Poukalova M

PROVIDER: S-EPMC2849904 | biostudies-literature | 2010 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Pullout strength of suture anchors: effect of mechanical properties of trabecular bone.

Poukalova Mariya M Yakacki Christopher M CM Guldberg Robert E RE Lin Angela A Saing Minn M Gillogly Scott D SD Gall Ken K

Journal of biomechanics 20100201 6

This study investigated the relationships between trabecular microstructure and elastic modulus, compressive strength, and suture anchor pullout strength. Twelve fresh-frozen humeri underwent mechanical testing followed by micro-computed tomography (microCT). Either compression testing of cylindrical bone samples or pullout testing using an Arthrex 5mm Corkscrew was performed in synthetic sawbone or at specific locations in the humerus such as the greater tuberosity, lesser tuberosity, and humer ...[more]

PMID: 20117785

Similar Datasets

Project description:Since their appearance in the fossil record 34 million years ago, modern cetaceans (dolphins, whales, and porpoises) have radiated into diverse habitats circumglobally, developing vast phenotypic variations among species. Traits such as skeletal morphology and ecologically linked behaviors denote swimming activity; trade-offs in flexibility and rigidity along the vertebral column determine patterns of caudal oscillation. Here, we categorized 10 species of cetaceans (families Delphinidae and Kogiidae; N = 21 animals) into functional groups based on vertebral centra morphology, swimming speeds, diving behavior, and inferred swimming patterns. We quantified trabecular bone mechanical properties (yield strength, apparent stiffness, and resilience) among functional groups and regions of the vertebral column (thoracic, lumbar, and caudal). We extracted 6 mm3 samples from vertebral bodies and tested them in compression in 3 orientations (rostrocaudal, dorsoventral, and mediolateral) at 2 mm min-1. Overall, bone from the pre-fluke/fluke boundary had the greatest yield strength and resilience, indicating that the greatest forces are translated to the tail during caudal oscillatory swimming. Group 1, composed of 5 shallow-diving delphinid species, had the greatest vertebral trabecular bone yield strength, apparent stiffness, and resilience of all functional groups. Conversely, Group 3, composed of 2 deep-diving kogiid species, had the least strong, stiff, and resilient bone, while Group 2 (3 deep-diving delphinid species) exhibited intermediate values. These data suggest that species that incorporate prolonged glides during deep descents in the water column actively swim less, and place relatively smaller loads on their vertebral columns, compared with species that execute shallower dives. We found that cetacean vertebral trabecular bone properties differed from the properties of terrestrial mammals; for every given bone strength, cetacean bone was less stiff by comparison. This relative lack of material rigidity within vertebral bone may be attributed to the non-weight-bearing locomotor modes of fully aquatic mammals.

Project description:The microstructure of trabecular bone is usually perceived as a collection of plate-like and rod-like trabeculae, which can be determined from the emerging high-resolution skeletal imaging modalities such as micro-computed tomography (?CT) or clinical high-resolution peripheral quantitative CT (HR-pQCT) using the individual trabecula segmentation (ITS) technique. It has been shown that the ITS-based plate and rod parameters are highly correlated with elastic modulus and yield strength of human trabecular bone. In the current study, plate-rod (PR) finite element (FE) models were constructed completely based on ITS-identified individual trabecular plates and rods. We hypothesized that PR FE can accurately and efficiently predict elastic modulus and yield strength of human trabecular bone. Human trabecular bone cores from proximal tibia (PT), femoral neck (FN) and greater trochanter (GT) were scanned by ?CT. Specimen-specific ITS-based PR FE models were generated for each ?CT image and corresponding voxel-based FE models were also generated in comparison. Both types of specimen-specific models were subjected to nonlinear FE analysis to predict the apparent elastic modulus and yield strength using the same trabecular bone tissue properties. Then, mechanical tests were performed to experimentally measure the apparent modulus and yield strength. Strong linear correlations for both elastic modulus (r(2) = 0.97) and yield strength (r(2) = 0.96) were found between the PR FE model predictions and experimental measures, suggesting that trabecular plate and rod morphology adequately captures three-dimensional (3D) microarchitecture of human trabecular bone. In addition, the PR FE model predictions in both elastic modulus and yield strength were highly correlated with the voxel-based FE models (r(2) = 0.99, r(2) = 0.98, respectively), resulted from the original 3D images without the PR segmentation. In conclusion, the ITS-based PR models predicted accurately both elastic modulus and yield strength determined experimentally across three distinct anatomic sites. Trabecular plates and rods accurately determine elastic modulus and yield strength of human trabecular bone.

Project description:PurposeSuture anchors are commonly used to repair rotator cuff tendons in arthroscopy surgery, and several anchor materials have been created to maximize pull-out strength and minimize iatrogenic damage. We hypothesized that all-suture anchors have biomechanical properties equivalent to those of conventional anchors. Our purpose is to compare the biomechanical properties of different anchors used for rotator cuff repair.MethodsThe Embase, PubMed, Cochrane, and Scopus databases were searched for biomechanical studies on various suture anchors. The search keywords included rotator cuff tears and suture anchors, and two authors conducted study a selection, risk of bias assessment, and data extraction. The failure load, stiffness, and displacement were calculated using the mean differences with 95% confidence intervals (CIs). Failure modes were estimated using summary odds ratios with 95% CIs. The surface under the cumulative ranking curve was used for the relative ranking probabilities. A sensitivity analysis was performed by excluding studies using synthetic bones.ResultsThe polyetheretherketone (PEEK) (p < 0.001) and all-suture anchors (p < 0.001) had higher failure loads than the biocomposite anchors, whereas no significant difference was observed in stiffness among the anchors. The all-suture (p = 0.006) and biocomposite anchors (p < 0.001) had displacements higher than the metal anchors. The relative ranking of the included anchors in failure loads and displacement changed in sensitivity analysis. The meta-analysis did not find significant differences, but the relative ranking probabilities suggested that all-suture anchor had a higher rate of anchor pull-out and a lower rate of eyelet or suture breakage. In contrast, the metal anchors were associated with a higher number of eyelet breakage episodes.ConclusionsAll-suture anchors showed significantly higher failure loads than the biocomposite anchors and similar cyclic displacements to the biocomposite and PEEK anchors. There were no significant differences in stiffness between all-suture and conventional suture anchors. The relative ranking of biomechanical properties changed in sensitivity analysis, suggesting the potential effect of bone marrow density.Level of evidenceLevel IV.

Project description:Irradiation therapy causes bone deterioration and increased risk for skeletal-related events. Irradiation interferes with trabecular architecture through increased osteoclastic activity, decreased osteoblastic activity, and increased adipocyte expansion in the bone marrow (BM), which further compounds bone-related disease. Neutralizing antibodies to sclerostin (Scl-Ab) increase bone mass and strength by increasing bone formation and reducing bone resorption. We hypothesized that treatment with Scl-Ab would attenuate the adverse effects of irradiation by increasing bone volume and decreasing BM adipose tissue (BMAT), resulting in better quality bone. In this study, 12-week-old female C57BL/6J mice were exposed to 6 Gy whole-body irradiation or were non-irradiated, then administered Scl-Ab (25 mg/kg) or vehicle weekly for 5 weeks. Femoral μCT analysis confirmed that the overall effect of IR significantly decreased trabecular bone volume/total volume (Tb.BV/TV) (2-way ANOVA, p < 0.0001) with a -43.8% loss in Tb.BV/TV in the IR control group. Scl-Ab independently increased Tb.BV/TV by 3.07-fold in non-irradiated and 3.6-fold in irradiated mice (2-way ANOVA, p < 0.0001). Irradiation did not affect cortical parameters, although Scl-Ab increased cortical thickness and area significantly in both irradiated and non-irradiated mice (2-way ANOVA, p < 0.0001). Femoral mechanical testing confirmed Scl-Ab significantly increased bending rigidity and ultimate moment independently of irradiation (2-way ANOVA, p < 0.0001). Static and dynamic histomorphometry of the femoral metaphysis revealed osteoblast vigor, not number, was significantly increased in the irradiated mice treated with Scl-Ab. Systemic alterations were assessed through serum lipidomic analysis, which showed that Scl-Ab normalized lipid profiles in the irradiated group. This data supports the theory of sclerostin as a novel contributor to the regulation of osteoblast activity after irradiation. Overall, our data support the hypothesis that Scl-Ab ameliorates the deleterious effects of whole-body irradiation on bone and adipose tissue in a mouse model. Our findings suggest that future research into localized and systemic therapies after irradiation exposure is warranted.

Dataset Information

Pullout strength of suture anchors: effect of mechanical properties of trabecular bone.

Publications

Pullout strength of suture anchors: effect of mechanical properties of trabecular bone.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets