CHOYCE: a web server for constrained homology modelling with cryoEM maps.
Ontology highlight
ABSTRACT:
SUBMITTER: Rawi R
PROVIDER: S-EPMC2887048 | biostudies-literature | 2010 Jul
REPOSITORIES: biostudies-literature
Publications
CHOYCE: a web server for constrained homology modelling with cryoEM maps.
Rawi Reda R Whitmore Lee L Topf Maya M
Bioinformatics (Oxford, England) 20100505 13
<h4>Summary</h4>CHOYCE is a web server for homology modelling of protein components and the fitting of those components into cryo electron microscopy (cryoEM) maps of their assemblies. It provides an interactive approach to improving the selection of models based on the quality of their fit into the EM map.<h4>Availability</h4>http://choyce.ismb.lon.ac.uk/<h4>Contact</h4>m.topf@cryst.bbk.ac.uk; reda.rawi@uni-due.de<h4>Supplementary information</h4>Supplementary data are available at Bioinformati ...[more]
Similar Datasets
Project description:Molecular replacement (MR) is the method of choice for X-ray crystallography structure determination when structural homologues are available in the Protein Data Bank (PDB). Although the success rate of MR decreases sharply when the sequence similarity between template and target proteins drops below 35% identical residues, it has been found that screening for MR solutions with a large number of different homology models may still produce a suitable solution where the original template failed. Here we present the web tool CaspR, implementing such a strategy in an automated manner. On input of experimental diffraction data, of the corresponding target sequence and of one or several potential templates, CaspR executes an optimized molecular replacement procedure using a combination of well-established stand-alone software tools. The protocol of model building and screening begins with the generation of multiple structure-sequence alignments produced with T-COFFEE, followed by homology model building using MODELLER, molecular replacement with AMoRe and model refinement based on CNS. As a result, CaspR provides a progress report in the form of hierarchically organized summary sheets that describe the different stages of the computation with an increasing level of detail. For the 10 highest-scoring potential solutions, pre-refined structures are made available for download in PDB format. Results already obtained with CaspR and reported on the web server suggest that such a strategy significantly increases the fraction of protein structures which may be solved by MR. Moreover, even in situations where standard MR yields a solution, pre-refined homology models produced by CaspR significantly reduce the time-consuming refinement process. We expect this automated procedure to have a significant impact on the throughput of large-scale structural genomics projects. CaspR is freely available at http://igs-server.cnrs-mrs.fr/Caspr/.
| S-EPMC441538 | biostudies-literature
Project description:SummarySequence homology is a basic concept in protein evolution, structure and function studies. However, there are not many different tools and services for homology searches being sensitive, accurate and fast at the same time. We present a new web server for protein analysis based on COMER2, a sequence alignment and homology search method that exhibits these characteristics. COMER2 has been upgraded since its last publication to improve its alignment quality and ease of use. We demonstrate how the user can benefit from using it by providing examples of extensive annotation of proteins of unknown function. Among the distinctive features of the web server is the user's ability to submit multiple queries with one click of a button. This and other features allow for transparently running homology searches-in a command-line, programmatic or graphical environment-across multiple databases with multiple queries. They also promote extensive simultaneous protein analysis at the sequence, structure and function levels.Availability and implementationThe COMER web server is available at https://bioinformatics.lt/comer.Supplementary informationSupplementary data are available at Bioinformatics online.
| S-EPMC9825750 | biostudies-literature
Project description:Loop regions in protein structures often have crucial roles, and they are much more variable in sequence and structure than other regions. In homology modeling, this leads to larger deviations from the homologous templates, and loop modeling of homology models remains an open problem. To address this issue, we have previously developed the DaReUS-Loop protocol, leading to significant improvement over existing methods. Here, a DaReUS-Loop web server is presented, providing an automated platform for modeling or remodeling loops in the context of homology models. This is the first web server accepting a protein with up to 20 loop regions, and modeling them all in parallel. It also provides a prediction confidence level that corresponds to the expected accuracy of the loops. DaReUS-Loop facilitates the analysis of the results through its interactive graphical interface and is freely available at http://bioserv.rpbs.univ-paris-diderot.fr/services/DaReUS-Loop/.
| S-EPMC6602439 | biostudies-literature
Project description:The biological properties of proteins are often gleaned through comparative analysis of evolutionary relatives. Although protein structure similarity search methods detect more distant homologs than purely sequence-based methods, structural resemblance can result from either homology (common ancestry) or analogy (similarity without common ancestry). While many existing web servers detect structural neighbors, they do not explicitly address the question of homology versus analogy. Here, we present a web server named HorA (Homology or Analogy) that identifies likely homologs for a query protein structure. Unlike other servers, HorA combines sequence information from state-of-the-art profile methods with structure information from spatial similarity measures using an advanced computational technique. HorA aims to identify biologically meaningful connections rather than purely 3D-geometric similarities. The HorA method finds approximately 90% of remote homologs defined in the manually curated database SCOP. HorA will be especially useful for finding remote homologs that might be overlooked by other sequence or structural similarity search servers. The HorA server is available at http://prodata.swmed.edu/horaserver.
| S-EPMC2703895 | biostudies-literature
Project description:With the advent of new artificial intelligence and machine learning algorithms, predictive modeling can, in some cases, produce structures on par with experimental methods. The combination of predictive modeling and experimental structure determination by electron cryomicroscopy (cryoEM) offers a tantalizing approach for producing robust atomic models of macromolecular assemblies. Here, we apply AlphaFold2 to a set of community standard data sets and compare the results with the corresponding reference maps and models. Moreover, we present three unique case studies from previously determined cryoEM density maps of viruses. Our results show that AlphaFold2 can not only produce reasonably accurate models for analysis and additional hypotheses testing, but can also potentially yield incorrect structures if not properly validated with experimental data. Whereas we outline numerous shortcomings and potential pitfalls of predictive modeling, the obvious synergy between predictive modeling and cryoEM will undoubtedly result in new computational modeling tools.
| S-EPMC9207676 | biostudies-literature
Project description:Gene expression is a multi-step process involving many layers of regulation. The main regulators of the pathway are DNA and RNA binding proteins. While over the years, a large number of DNA and RNA binding proteins have been identified and extensively studied, it is still expected that many other proteins, some with yet another known function, are awaiting to be discovered. Here we present a new web server, BindUP, freely accessible through the website http://bindup.technion.ac.il/, for predicting DNA and RNA binding proteins using a non-homology-based approach. Our method is based on the electrostatic features of the protein surface and other general properties of the protein. BindUP predicts nucleic acid binding function given the proteins three-dimensional structure or a structural model. Additionally, BindUP provides information on the largest electrostatic surface patches, visualized on the server. The server was tested on several datasets of DNA and RNA binding proteins, including proteins which do not possess DNA or RNA binding domains and have no similarity to known nucleic acid binding proteins, achieving very high accuracy. BindUP is applicable in either single or batch modes and can be applied for testing hundreds of proteins simultaneously in a highly efficient manner.
| S-EPMC4987955 | biostudies-literature
Project description:AimThis study was conducted to find the best suited freely available software for modelling of proteins by taking a few sample proteins. The proteins used were small to big in size with available crystal structures for the purpose of benchmarking. Key players like Phyre2, Swiss-Model, CPHmodels-3.0, Homer, (PS)2, (PS)(2)-V(2), Modweb were used for the comparison and model generation.ResultsBenchmarking process was done for four proteins, Icl, InhA, and KatG of Mycobacterium tuberculosis and RpoB of Thermus Thermophilus to get the most suited software. Parameters compared during analysis gave relatively better values for Phyre2 and Swiss-Model.ConclusionThis comparative study gave the information that Phyre2 and Swiss-Model make good models of small and large proteins as compared to other screened software. Other software was also good but is often not very efficient in providing full-length and properly folded structure.
| S-EPMC3766314 | biostudies-literature
Project description:Large biomolecules-proteins and nucleic acids-are composed of building blocks which define their identity, properties and binding capabilities. In order to shed light on the energetic side of interactions of amino acids between themselves and with deoxyribonucleotides, we present the Amino Acid Interaction web server (http://bioinfo.uochb.cas.cz/INTAA/). INTAA offers the calculation of the residue Interaction Energy Matrix for any protein structure (deposited in Protein Data Bank or submitted by the user) and a comprehensive analysis of the interfaces in protein-DNA complexes. The Interaction Energy Matrix web application aims to identify key residues within protein structures which contribute significantly to the stability of the protein. The application provides an interactive user interface enhanced by 3D structure viewer for efficient visualization of pairwise and net interaction energies of individual amino acids, side chains and backbones. The protein-DNA interaction analysis part of the web server allows the user to view the relative abundance of various configurations of amino acid-deoxyribonucleotide pairs found at the protein-DNA interface and the interaction energies corresponding to these configurations calculated using a molecular mechanical force field. The effects of the sugar-phosphate moiety and of the dielectric properties of the solvent on the interaction energies can be studied for the various configurations.
| S-EPMC5570164 | biostudies-other
Project description:Protein structure is more conserved than sequence in nature. In this direction we developed a novel methodology that significantly improves conventional homology modelling when sequence identity is low, by taking into consideration 3D structural features of the template, such as size and shape. Herein, our new homology modelling approach was applied to the homology modelling of the RNA-dependent RNA polymerase (RdRp) of dengue (type II) virus. The RdRp of dengue was chosen due to the low sequence similarity shared between the dengue virus polymerase and the available templates, while purposely avoiding to use the actual X-ray structure that is available for the dengue RdRp. The novel approach takes advantage of 3D space corresponding to protein shape and size by creating a 3D scaffold of the template structure. The dengue polymerase model built by the novel approach exhibited all features of RNA-dependent RNA polymerases and was almost identical to the X-ray structure of the dengue RdRp, as opposed to the model built by conventional homology modelling. Therefore, we propose that the space-aided homology modelling approach can be of a more general use to homology modelling of enzymes sharing low sequence similarity with the template structures.
| S-EPMC3748430 | biostudies-literature
Project description:COMPASS is a method for homology detection and local alignment construction based on the comparison of multiple sequence alignments (MSAs). The method derives numerical profiles from given MSAs, constructs local profile-profile alignments and analytically estimates E-values for the detected similarities. Until now, COMPASS was only available for download and local installation. Here, we present a new web server featuring the latest version of COMPASS, which provides (i) increased sensitivity and selectivity of homology detection; (ii) longer, more complete alignments; and (iii) faster computational speed. After submission of the query MSA or single sequence, the server performs searches versus a user-specified database. The server includes detailed and intuitive control of the search parameters. A flexible output format, structured similarly to BLAST and PSI-BLAST, provides an easy way to read and analyze the detected profile similarities. Brief help sections are available for all input parameters and output options, along with detailed documentation. To illustrate the value of this tool for protein structure-functional prediction, we present two examples of detecting distant homologs for uncharacterized protein families. Available at http://prodata.swmed.edu/compass.
| S-EPMC1933213 | biostudies-literature