Electrochemiluminescent immunosensor for detection of protein cancer biomarkers using carbon nanotube forests and [Ru-(bpy)(3)](2+)-doped silica nanoparticles.
Ontology highlight
ABSTRACT:
SUBMITTER: Sardesai N
PROVIDER: S-EPMC2895768 | biostudies-literature | 2009 Sep
REPOSITORIES: biostudies-literature
Publications
Electrochemiluminescent immunosensor for detection of protein cancer biomarkers using carbon nanotube forests and [Ru-(bpy)(3)](2+)-doped silica nanoparticles.
Sardesai Naimish N Pan Shenmin S Rusling James J
Chemical communications (Cambridge, England) 20090710 33
We report the first electrochemiluminescent immunosensor combining single-wall carbon nanotube forests with RuBPY-silica-secondary antibody nanoparticles for sensitive detection of cancer biomarker prostate specific antigen. ...[more]
Similar Datasets
Project description:Herein, for the first time, the electrochemiluminescent sensor based on Ru(bpy)(3) (2+)-modified electrode using dopamine as an adhesive was successfully developed. After halloysite nanotube slurry was cast on a glassy carbon electrode and dried, an alkaline dopamine solution was added on the electrode surface. Initially, polydopamine belts with dimensions of tens to hundreds of nanometers formed via oxidization of the dopamine by ambient oxygen. As the incubation time increased, the nanobelts became broader and then united with each other to form a polydopamine film. The halloysite nanotubes were embedded within the polydopamine film. The above electrode was soaked in Ru(bpy)(3) (2+) aqueous solution to adsorb Ru(bpy)(3) (2+) into the active sites of the halloysite nanotubes via cation-exchange procedure. Through this simple procedure, a Ru(bpy)(3) (2+)-modified electrode was obtained using only 6.25 microg Ru(bpy)(3) (2+), 15.0 microg dopamine, and 9.0 microg halloysite nanotubes. The electrochemistry and electrochemiluminescence (ECL) of the modified electrode was investigated using tripropylamine (TPA) and nitrilotriacetic acid (NTA) as co-reactants. The different ECL behaviors of the modified electrode using NTA and TPA as well as the contact angle measurements reflected the hydrophilic character of the electrode. The results indicate that halloysite nanotubes have a high loading capacity for Ru(bpy)(3) (2+) and that dopamine is suitable for the preparation of modified electrodes.
| S-EPMC2714183 | biostudies-literature
Project description:A highly sensitive sandwich-type electrochemiluminescence (ECL) immunosensor was proposed for the quantitative determination of alpha fetoprotein (AFP) using gold nanoparticles decorated black carbon intercalated reduced graphene oxide (Au-rGO@CB) as sensing platform and nanoporous silver (NPS) loaded Ru(bpy)3(2+) as labels. In this work, intercalation of CB inhibited the accumulation of rGO and Au-rGO@CB was firstly used to immobilize primary antibody (Ab1) in ECL system. NPS prepared by the dealloying of binary alloy has high pore volume and surface areas, which was used to load amount of secondary antibodies (Ab2) and Ru(bpy)3(2+), which could greatly enhance the ECL intensity. Under optimal conditions, the designed immunosensor exhibited wider linear range from 0.0001 to 30?ng/mL with a relative lower detection limit of 33?fg/mL for AFP detection. Overall, the designed immunosensor exhibited high sensitivity and selectivity, good repeatability and stability. This proposed method provided a potential application for clinical monitoring of AFP.
| S-EPMC4734325 | biostudies-literature
Project description:The increased serum concentration of CD36 is significantly associated with atherosclerosis, insulin resistance, and diabetes mellitus. Currently, there is no sensor system used for the detection of CD36 in the clinical field. Therefore, there is a need to develop a sensor system for the detection of CD36. The large surface area/volume ratio and controllable surface conformation of electrospun nanofibers (ENs) make them highly attractive for immunosensor applications. In the present study, PS/MWCNT-PAMAM ENs were produced and used as an immobilization matrix of Anti-CD36. Thus, the electrochemical behavior of the developed nanocomposite-based ENs and their usage potential were investigated for immunosensor applications. First, an oxidized multiwall carbon nanotube (MWCNT-OH) was synthesized and modified with a polyamidoamine generation 3 (PAMAM G3) dendrimer. The synthesized MWCNT-PAMAM nanocomposite was mixed with polystyrene (PS) solutions at different ratios to produce bead-free, smooth, and uniform PS/MWCNT-PAMAM ENs. PS/MWCNT-PAMAM ENs were accumulated on a screen-printed carbon electrode (SPCE) using the electrospinning technique. A biofunctional surface on the PS/MWCNT-PAMAM EN-coated SPCE was created using carbodiimide chemistry by covalent immobilization of Anti-CD36. The analytic performance characteristics of the developed PS/MWCNT-PAMAM/Anti-CD36 immunosensor were determined by performing electrochemical measurements in the presence of the CD36 protein. The linear detection range was found to be from 5 to 40 ng/mL, and the limit of detection was calculated as 3.94 ng/mL for CD36. The developed PS/MWCNT-PAMAM/Anti-CD36 immunosensor also displayed high tolerance to interference substances, good repeatability, and high recovery percent (recovery%) for artificial blood serum analysis.
| S-EPMC9933220 | biostudies-literature
Project description:This paper describes fabrication of a novel electrochemiluminescence (ECL) immunosensor array featuring capture-antibody-decorated single-wall carbon nanotube (SWCNT) forests residing in the bottoms of 10-?L wells with hydrophobic polymer walls. Silica nanoparticles containing [Ru(bpy)(3)](2+) and secondary antibodies (RuBPY-silica-Ab(2)) are employed in this system for highly sensitive two-analyte detection. Antibodies to prostate specific antigen (PSA) and interleukin-6 (IL-6) were attached to the same RuBPY-silica-Ab(2) particle. The array was fabricated by forming the wells on a conductive pyrolytic graphite chip (1 in. × 1 in.) with a single connection to a potentiostat to achieve ECL. The sandwich immunoassay protocol employs antibodies attached to SWCNTs in the wells to capture analyte proteins. Then RuBPY-silica-Ab(2) is added to bind to the captured proteins. ECL is initiated in the microwells by electrochemical oxidation of tripropyl amine (TprA), which generates excited state [Ru(bpy)(3)](2+) in the 100-nm particles, and is measured with a charge-coupled device (CCD) camera. Separation of the analytical spots by the hydrophobic wall barriers enabled simultaneous immunoassays for two proteins in a single sample without cross-contamination. The detection limit (DL) for PSA was 1 pg mL(-1) and for IL-6 was 0.25 pg mL(-1) (IL-6) in serum. Array determinations of PSA and IL-6 in patient serum were well-correlated with single-protein ELISAs. These microwell SWCNT immunoarrays provide a simple, sensitive approach to the detection of two or more proteins.
| S-EPMC3169383 | biostudies-literature
Project description:Electrochemiluminescence (ECL) refers to light emission induced by an electrochemical redox reaction. The stability, emission response, and light intensity of the ECL device are known to be improved by using an alternating current (AC) voltage. In this paper, an AC-driven ECL device is fabricated with DNA/Ru(bpy)32+ hybrid film-modified electrode. The Ru(bpy)32+ complex exhibits significant electrochemical reactivity in the DNA/Ru(bpy)32+ hybrid film prepared by electrochemical adsorption. The hybrid film contains unique micrometre-scale aggregates of Ru(bpy)32+ in DNA matrix. The physicochemical properties of the hybrid film and its AC-driven ECL characteristics in the electrochemical device are studied. Orange-coloured ECL is observed to be emitted from only the aggregated structures in the hybrid film at the high AC frequency of 10 kHz, which corresponds to a response time shorter than 100 μs.
| S-EPMC5561079 | biostudies-other
Project description:Carbon nanomaterials have attracted significant attention for a variety of biomedical applications including sensing and detection, photothermal therapy, and delivery of therapeutic cargo. The ease of chemical functionalization, tunable length scales and morphologies, and ability to undergo complete enzymatic degradation make carbon nanomaterials an ideal drug delivery system. Much work has been done to synthesize carbon nanomaterials ranging from carbon dots, graphene, and carbon nanotubes to carbon nanocapsules, specifically carbon nanohorns or nitrogen-doped carbon nanocups. Here, we analyze specific properties of nitrogen-doped carbon nanotube cups which have been designed and utilized as drug delivery systems with the focus on the loading of these nanocapsules with specific therapeutic cargo and the targeted delivery for cancer therapy. We also summarize our targeted synthesis of gold nanoparticles on the open edge of nitrogen-doped carbon nanotube cups to create loaded and sealed nanocarriers for the delivery of chemotherapeutic agents to myeloid regulatory cells responsible for the immunosuppressive properties of the tumor microenvironment and thus tumor immune escape.
| S-EPMC9879341 | biostudies-literature
Project description:Vertically ordered mesoporous silica film (VMSF) with uniform mesoporous channels perpendicular to electrode substrate has a wide range of applications in direct electroanalysis of complex samples. However, the detection of nucleic acid bases is difficult to realize at the commonly used VMSF-modified indium tin oxide (VMSF/ITO) electrode due to the high overpotentials of underlying ITO for many small organic molecules. In this work, we demonstrated an electrochemical method for the sensitive detection of guanine (G) by integration of VMSF/ITO and tris(2,2′-bipyridine) ruthenium (II) [Ru(bpy)32+] redox mediator. Ru(bpy)32+ electrostatically accumulated by VMSF is able to act as an electron shuttle between G and underlying ITO surface, showing electrocatalytic oxidation of G and enabling the quantitative determination of G with a limit of detection (LOD) of 0.058 μM and a limit of quantitation (LOQ) of 0.2 μM. Electrochemical detection performance for G could be regulated by changing the pH of the supporting electrolyte and the content of Ru(bpy)32+, achieving a wide dynamic linear range from 0.2 to 10 μM (R2 = 0.999), 2 to 100 μM (R2 = 0.999), and 10 to 500 μM (R2 = 0.998). Furthermore, owing to the good anti-fouling and anti-interference ability of VMSF, this simply sensing strategy can be applied to the direct and rapid detection of G in beer samples, and the detection of ganciclovir (G analog) content in ganciclovir eye drops.
| S-EPMC9468770 | biostudies-literature
Project description:We demonstrate a facile synthesis of different nanostructures by oxidative unzipping of stacked nitrogen-doped carbon nanotube cups (NCNCs). Depending on the initial number of stacked-cup segments, this method can yield graphene nanosheets (GNSs) or hybrid nanostructures comprised of graphene nanoribbons partially unzipped from a central nanotube core. Due to the stacked-cup structure of as-synthesized NCNCs, preventing complete exposure of graphitic planes, the unzipping mechanism is hindered, resulting in incomplete unzipping; however, individual, separated NCNCs are completely unzipped, yielding individual nitrogen-doped GNSs. Graphene-based materials have been employed as electrocatalysts for many important chemical reactions, and it has been proposed that increasing the reactive edges results in more efficient electrocatalysis. In this paper, we apply these graphene conjugates as electrocatalysts for the oxygen reduction reaction (ORR) to determine how the increase in reactive edges affects the electrocatalytic activity. This investigation introduces a new method for the improvement of ORR electrocatalysts by using nitrogen dopants more effectively, allowing for enhanced ORR performance with lower overall nitrogen content. Additionally, the GNSs were functionalized with gold nanoparticles (GNPs), resulting in a GNS/GNP hybrid, which shows efficient surface-enhanced Raman scattering and expands the scope of its application in advanced device fabrication and biosensing.
| S-EPMC6563925 | biostudies-literature
Project description:Surface enhanced spectroscopy such as surface enhanced Raman spectrum (SERS) and surface enhanced fluorescence have been investigated extensively in the past two decades. Herein, we present experimental evidence to demonstrate the existence of a new surface enhanced spectroscopy, namely, surface enhanced electrochemiluminescence (SEECL). Our investigation indicates that the electrochemiluminescence (ECL) response of the Ru(bpy)3(2+)-tri-n-propylamine (TPrA) system could be significantly enhanced when the working electrode is modified with gold nanoparticle-SiO2 core-shell nanocomposites (AuNP@SiO2). It is worth noting that comparing with a working electrode modified with pure SiO2 nanoparticles, the electrochemical responses of the two electrodes were quite similar, but the ECL signal of the AuNP@SiO2 modified electrode was ~5 times higher than that of the SiO2 nanoparticles modified electrode. Thus we infer that the localized surface plasmon resonance (LSPR) of the AuNPs could be a major contribution to the ECL enhancement. Our investigations also demonstrate that the ECL enhancement is closely related to the thickness of the SiO2 layer. As much as 10 times ECL enhancement (comparing with the ECL intensity of bare electrode) is observed under the optimal conditions. The possible mechanism of the SEECL phenomenon is also discussed.
| S-EPMC4302298 | biostudies-literature
Project description:The low photostability of conventional organic dyes and the toxicity of cadmium-based luminescent quantum dots have prompted the development of novel probes for in vitro and in vivo labelling. Here, a new fluorescent lanthanide probe based on silica nanoparticles is fabricated and investigated for optically traceable in vitro translocator protein (TSPO) targeting. The targeting and detection of TSPO receptor, overexpressed in several pathological states, including neurodegenerative diseases and cancers, may provide valuable information for the early diagnosis and therapy of human disorders. Green fluorescent terbium(III)-calix[4]arene derivative complexes are encapsulated within silica nanoparticles and surface functionalized amine groups are conjugated with selective TSPO ligands based on a 2-phenylimidazo[1,2-a]pyridine acetamide structure containing derivatizable carboxylic groups. The photophysical properties of the terbium complex, promising for biological labelling, are demonstrated to be successfully conveyed to the realized nanoarchitectures. In addition, the high degree of biocompatibility, assessed by cell viability assay and the selectivity towards TSPO mitochondrial membrane receptors, proven by subcellular fractional studies, highlight targeting potential of this nanostructure for in vitro labelling of mitochondria.
| S-EPMC6651519 | biostudies-literature