MicroRNAome changes in bystander three-dimensional human tissue models suggest priming of apoptotic pathways.
Ontology highlight
ABSTRACT:
SUBMITTER: Kovalchuk O
PROVIDER: S-EPMC2950932 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:PURPOSE:In vitro analyses of virulence, pathogenicity and associated host cell responses are important components in the study of biofilm infections. The Candida-related infection, denture-associated oral candidosis, affects up to 60 % of denture wearers and manifests as inflammation of palatal tissues contacting the denture-fitting surface. Commercially available three-dimensional tissue models can be used to study infection, but their use is limited for many academic research institutions, primarily because of the substantial purchase costs. The aim of this study was to develop and evaluate the use of in vitro tissue models to assess infections by biofilms on acrylic surfaces through tissue damage and Candida albicans virulence gene expression. METHODOLOGY:In vitro models were compared against commercially available tissue equivalents (keratinocyte-only, SkinEthic; full-thickness, MatTek Corporation). An in vitro keratinocyte-only tissue was produced using a cancer-derived cell line, TR146, and a full-thickness model incorporating primary fibroblasts and immortalised normal oral keratinocytes was also generated. The in vitro full-thickness tissues incorporated keratinocytes and fibroblasts, and have potential for future further development and analysis. RESULTS:Following polymicrobial infection with biofilms on acrylic surfaces, both in-house developed models were shown to provide equivalent results to the SkinEthic and MatTek models in terms of tissue damage: a significant (P<0.05) increase in LDH activity for mixed species biofilms compared to uninfected control, and no significant difference (P>0.05) in the expression of most C. albicans virulence genes when comparing tissue models of the same type. CONCLUSION:Our results confirm the feasibility and suitability of using these alternative in vitro tissue models for such analyses.
| S-EPMC5882079 | biostudies-literature
Project description:Morphogenesis of epithelial cells involves processes by which kidney shape and function are regulated. The lack of in vitro models that are sustainable for longer time periods and emulating complex intercellular interactions of the kidney have limited understanding about epithelial tissue morphogenesis and its aberrations in diseases such as autosomal dominant polycystic kidney disease (ADPKD). A sustainable three-dimensional (3D) coculture system for normal and diseased kidney tissues is reported here. Tubule- and ADPKD cyst-derived cells were cultured in extracellular matrix molecules infused into 3D porous silk scaffolds, and these cultures were subsequently extended into a perfusion bioreactor. The results indicated collagen-matrigel-mediated morphogenesis for both (normal and disease) cell types and also supported coculturing with fibroblasts. The structural and functional features of the kidney-like tissue structures were validated based on the distribution of E-cadherin, N-cadherin, Na+ K+ ATPase pump, and cellular uptake of the organic anion (6-carboxy fluorescein). Further, the structures were sustained for longer time periods using a perfusion bioreactor to demonstrate the potential utility of this 3D in vitro coculture system for ADPKD research, other epithelial tissue systems, and for in vitro drug screening.
| S-EPMC2928330 | biostudies-literature
Project description:Animal testing has long been used in science to study complex biological phenomena that cannot be investigated using two-dimensional cell cultures in plastic dishes. With time, it appeared that more differences could exist between animal models and even more when translated to human patients. Innovative models became essential to develop more accurate knowledge. Tissue engineering provides some of those models, but it mostly relies on the use of prefabricated scaffolds on which cells are seeded. The self-assembly protocol has recently produced organ-specific human-derived three-dimensional models without the need for exogenous material. This strategy will help to achieve the 3R principles.
| S-EPMC7552665 | biostudies-literature
Project description:The tumor extracellular matrix (ECM) plays a vital role in tumor progression and drug resistance. Previous studies have shown that breast tissue-derived matrices could be an important biomaterial to recreate the complexity of the tumor ECM. We have developed a method for decellularizing and delipidating a porcine breast tissue (TDM) compatible with hydrogel formation. The addition of gelatin methacrylamide and alginate allows this TDM to be bioprinted by itself with good printability, shape fidelity, and cytocompatibility. Furthermore, this bioink has been tuned to more closely recreate the breast tumor by incorporating collagen type I (Col1). Breast cancer cells (BCCs) proliferate in both TDM bioinks forming cell clusters and spheroids. The addition of Col1 improves the printability of the bioink as well as increases BCC proliferation and reduces doxorubicin sensitivity due to a downregulation of HSP90. TDM bioinks also allow a precise three-dimensional printing of scaffolds containing BCCs and stromal cells and could be used to fabricate artificial tumors. Taken together, we have proven that these novel bioinks are good candidates for biofabricating breast cancer models.
| S-EPMC9264314 | biostudies-literature
Project description:BackgroundDespite their heterogeneity, the current standard preoperative radiotherapy regimen for localized high-grade soft tissue sarcoma (STS) follows a one fits all approach for all STS subtypes. Sarcoma patient-derived three-dimensional cell culture models represent an innovative tool to overcome challenges in clinical research enabling reproducible subtype-specific research on STS. In this pilot study, we present our methodology and preliminary results using STS patient-derived 3D cell cultures that were exposed to different doses of photon and proton radiation. Our aim was: (i) to establish a reproducible method for irradiation of STS patient-derived 3D cell cultures and (ii) to explore the differences in tumor cell viability of two different STS subtypes exposed to increasing doses of photon and proton radiation at different time points.MethodsTwo patient-derived cell cultures of untreated localized high-grade STS (an undifferentiated pleomorphic sarcoma (UPS) and a pleomorphic liposarcoma (PLS)) were exposed to a single fraction of photon or proton irradiation using doses of 0 Gy (sham irradiation), 2 Gy, 4 Gy, 8 Gy and 16 Gy. Cell viability was measured and compared to sham irradiation at two different time points (four and eight days after irradiation).ResultsThe proportion of viable tumor cells four days after photon irradiation for UPS vs. PLS were significantly different with 85% vs. 65% (4 Gy), 80% vs. 50% (8 Gy) and 70% vs. 35% (16 Gy). Proton irradiation led to similar diverging viability curves between UPS vs. PLS four days after irradiation with 90% vs. 75% (4 Gy), 85% vs. 45% (8 Gy) and 80% vs. 35% (16 Gy). Photon and proton radiation displayed only minor differences in cell-killing properties within each cell culture (UPS and PLS). The cell-killing effect of radiation sustained at eight days after irradiation in both cell cultures.ConclusionsPronounced differences in radiosensitivity are evident among UPS and PLS 3D patient-derived sarcoma cell cultures which may reflect the clinical heterogeneity. Photon and proton radiation showed similar dose-dependent cell-killing effectiveness in both 3D cell cultures. Patient-derived 3D STS cell cultures may represent a valuable tool to enable translational studies towards individualized subtype-specific radiotherapy in patients with STS.
| S-EPMC10286352 | biostudies-literature
Project description:This is a 7-years single institution study on low-cost cardiac three-dimensional (3D) printing based on the use of free open-source programs and affordable printers and materials. The process of 3D printing is based on several steps (image acquisition, segmentation, mesh optimization, slicing, and three-dimensional printing). The necessary technology and the processes to set up an affordable three-dimensional printing laboratory are hereby described in detail. Their impact on surgical and interventional planning, medical training, communication with patients and relatives, patients' perception on care, and new cardiac device development was analyzed. A total of 138 low-cost heart models were designed and printed from 2013 to 2020. All of them were from different congenital heart disease patients. The average time for segmentation and design of the hearts was 136 min; the average time for printing and cleaning the models was 13.5 h. The average production cost of the models was €85.7 per model. This is the most extensive series of 3D printed cardiac models published to date. In this study, the possibility of manufacturing three-dimensional printed heart models in a low-cost facility fulfilling the highest requirements from a technical and clinical point of view is demonstrated.
| S-EPMC8211988 | biostudies-literature
Project description:Intra-tumor heterogeneity represents a major barrier to anti-cancer therapies. One strategy to minimize this limitation relies on bystander effects via diffusion of cytotoxins from targeted cells. Hypoxia-activated prodrugs (HAPs) have the potential to exploit hypoxia in this way, but robust methods for measuring bystander effects are lacking. The objective of this study is to develop experimental models (monolayer, multilayer, and multicellular spheroid co-cultures) comprising 'activator' cells with high expression of prodrug-activating reductases and reductase-deficient 'target' cells, and to couple these with agent-based models (ABMs) that describe diffusion and reaction of prodrugs and their active metabolites, and killing probability for each cell. HCT116 cells were engineered as activators by overexpressing P450 oxidoreductase (POR) and as targets by knockout of POR, with fluorescent protein and antibiotic resistance markers to enable their quantitation in co-cultures. We investigated two HAPs with very different pharmacology: SN30000 is metabolized to DNA-breaking free radicals under hypoxia, while the dinitrobenzamide PR104A generates DNA-crosslinking nitrogen mustard metabolites. In anoxic spheroid co-cultures, increasing the proportion of activator cells decreased killing of both activators and targets by SN30000. An ABM parameterized by measuring SN30000 cytotoxicity in monolayers and diffusion-reaction in multilayers accurately predicted SN30000 activity in spheroids, demonstrating the lack of bystander effects and that rapid metabolic consumption of SN30000 inhibited prodrug penetration. In contrast, killing of targets by PR104A in anoxic spheroids was markedly increased by activators, demonstrating that a bystander effect more than compensates any penetration limitation. However, the ABM based on the well-studied hydroxylamine and amine metabolites of PR104A did not fit the cell survival data, indicating a need to reassess its cellular pharmacology. Characterization of extracellular metabolites of PR104A in anoxic cultures identified more stable, lipophilic, activated dichloro mustards with greater tissue diffusion distances. Including these metabolites explicitly in the ABM provided a good description of activator and target cell killing by PR104A in spheroids. This study represents the most direct demonstration of a hypoxic bystander effect for PR104A to date, and demonstrates the power of combining mathematical modeling of pharmacokinetics/pharmacodynamics with multicellular culture models to dissect bystander effects of targeted drug carriers.
| S-EPMC6153434 | biostudies-literature
Project description:The need for physiologically relevant sustainable human adipose tissue models is crucial for understanding tissue development, disease progression, in vitro drug development and soft tissue regeneration. The coculture of adipocytes differentiated from human adipose-derived stem cells, with endothelial cells, on porous silk protein matrices for at least 6 months is reported, while maintaining adipose-like outcomes. Cultures were assessed for structure and morphology (Oil Red O content and CD31 expression), metabolic functions (leptin, glycerol production, gene expression for GLUT4, and PPARγ) and cell replication (DNA content). The cocultures maintained size and shape over this extended period in static cultures, while increasing in diameter by 12.5% in spinner flask culture. Spinner flask cultures yielded improved adipose tissue outcomes overall, based on structure and function, when compared to the static cultures. This work establishes a tissue model system that can be applied to the development of chronic metabolic dysfunction systems associated with human adipose tissue, such as obesity and diabetes, due to the long term sustainable functions demonstrated here.
| S-EPMC3751318 | biostudies-literature
Project description:Rationale: Continued reliance on preclinical animal models and traditional human cell culture experiments conducted on supraphysiologically stiff surfaces in two dimensions often limits the translation of cellular and molecular mechanistic findings into effective therapies for patients suffering from chronic obstructive pulmonary disease (COPD). COPD ranks as the fourth highest cause of mortality in the United States, and thus it is imperative to improve ex vivo models of this devastating disease. One emerging novel model of study involves using precision-cut lung slices as three-dimensional lung tissue culture (3D-LTC) platforms. Although this model retains the complex pulmonary architecture required for more precise ex vivo modeling, it is limited by short-term viability (?5–7 d). Objectives: We hypothesized that this decrease in viability is related to slices losing the extracellular matrix adhesion foundation critical for normal cellular functioning and that encapsulation of slices in custom hydrogel microenvironments would improve maintenance of a stable phenotype for longer-term investigational studies. Methods: The 3D-LTC slices tested here were created according to standard protocols from healthy mouse lungs and from the lungs of a patient with COPD. We synthesized poly(ethylene glycol)–based polymers to create custom hydrogels for encapsulation of 3D-LTCs with mechanical properties that match each type of lung tissue. The Young’s modulus (E) or stiffness of hydrogels was measured with a parallel-plate rheometer. Lung slices were analyzed for viability with a colorimetric assay that measures cellular metabolism (WST-1; Millipore Sigma) and by staining for cell membrane integrity (Invitrogen LIVE/DEAD viability kit; Thermo Fisher Scientific). All fluorescently labeled samples were imaged by spinning disk confocal microscopy, and cell viability at all time points was analyzed with ImageJ software. Results: The average percent viability of cells within hybrid 3D-LTCs was consistently higher than control 3D-LTCs on Day 1 (35% increase; P?<?0.001) and Day 7 (55% increase; P?<?0.001) according to LIVE/DEAD staining results. The WST-1 assay further showed no significant difference in viability between the two systems up to Day 18 in culture. Conclusions: We have demonstrated that it is possible to create customized hydrogel platforms that replicate the stiffness of healthy mouse and human COPD lung tissues. Precision cut lung slices embedded in these materials maintain higher levels of viability compared with controls in culture. Further optimization of this technology platform is ongoing and will facilitate the development of more organotypic ex vivo models of chronic pulmonary disease.
| S-EPMC6322000 | biostudies-literature
Project description:Nano-hydroxyapatite is used in oral care products worldwide. But there is little evidence yet whether nano-hydroxyapatite can enter systemic tissues via the oral epithelium. We investigated histologically the ability of two types of nano-hydroxyapatite, SKM-1 and Mi-HAP, to permeate oral epithelium both with and without a stratum corneum, using two types of three-dimensional reconstituted human oral epithelium, SkinEthic HGE and SkinEthic HOE respectively with and without a stratum corneum. Both types of nano-hydroxyapatite formed aggregates in solution, but both aggregates and primary particles were much larger for SKM-1 than for Mi-HAP. Samples of each tissue model were exposed to SKM-1 and Mi-HAP for 24 h at concentrations ranging from 1,000 to 50,000 ppm. After treatment, paraffin sections from the samples were stained with Dahl or Von Kossa stains. We also used OsteoSense 680EX, a fluorescent imaging agent, to test for the presence of HAP in paraffin tissue sections for the first time. Our results for both types of nano-hydroxyapatite showed that the nanoparticles did not penetrate the stratum corneum in SkinEthic HGE samples and penetrated only the outermost layer of cells in SkinEthic HOE samples without stratum corneum, and no permeation into the deeper layers of the epithelium in either tissue model was observed. In the non-cornified model, OsteoSense 680EX staining confirmed the presence of nano-hydroxyapatite particles in both the cytoplasm and extracellular matrix of outermost cells, but not in the deeper layers. Our results suggest that the stratum corneum may act as a barrier to penetration of nano-hydroxyapatite into the oral epithelium. Moreover, since oral epithelial cell turnover is around 5-7 days, superficial cells of the non-keratinized mucosa in which nanoparticles are taken up are likely to be deciduated within that time frame. Our findings suggest that nano-hydroxyapatite is unlikely to enter systemic tissues via intact oral epithelium.
| S-EPMC6478310 | biostudies-other