Dataset Information

Influence of external resistance on electrogenesis, methanogenesis, and anode prokaryotic communities in microbial fuel cells.

ABSTRACT: The external resistance (R(ext)) of microbial fuel cells (MFCs) regulates both the anode availability as an electron acceptor and the electron flux through the circuit. We evaluated the effects of R(ext) on MFCs using acetate or glucose. The average current densities (I) ranged from 40.5 mA/m(2) (9,800 ?) to 284.5 mA/m(2) (150 ?) for acetate-fed MFCs (acetate-fed reactors [ARs]), with a corresponding anode potential (E(an)) range of -188 to -4 mV (versus a standard hydrogen electrode [SHE]). For glucose-fed MFCs (glucose-fed reactors [GRs]), I ranged from 40.0 mA/m(2) (9,800 ?) to 273.0 mA/m(2) (150 ?), with a corresponding E(an) range of -189 to -7 mV. ARs produced higher Coulombic efficiencies and energy efficiencies than GRs over all tested R(ext) levels because of electron and potential losses from glucose fermentation. Biogas production accounted for 14 to 18% of electron flux in GRs but only 0 to 6% of that in ARs. GRs produced similar levels of methane, regardless of the R(ext). However, total methane production in ARs increased as R(ext) increased, suggesting that E(an) might influence the competition for substrates between exoelectrogens and methanogens in ARs. An increase of R(ext) to 9,800 ? significantly changed the anode bacterial communities for both ARs and GRs, while operating at 970 ? and 150 ? had little effect. Deltaproteobacteria and Bacteroidetes were the major groups found in anode communities in ARs and GRs. Betaproteobacteria and Gammaproteobacteria were found only in ARs. Bacilli were abundant only in GRs. The anode-methanogenic communities were dominated by Methanosaetaceae, with significantly lower numbers of Methanomicrobiales. These results show that R(ext) affects not only the E(an) and current generation but also the anode biofilm community and methanogenesis.

SUBMITTER: Jung S

PROVIDER: S-EPMC3020560 | biostudies-literature | 2011 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Influence of external resistance on electrogenesis, methanogenesis, and anode prokaryotic communities in microbial fuel cells.

Jung Sokhee S Regan John M JM

Applied and environmental microbiology 20101112 2

The external resistance (R(ext)) of microbial fuel cells (MFCs) regulates both the anode availability as an electron acceptor and the electron flux through the circuit. We evaluated the effects of R(ext) on MFCs using acetate or glucose. The average current densities (I) ranged from 40.5 mA/m(2) (9,800 Ω) to 284.5 mA/m(2) (150 Ω) for acetate-fed MFCs (acetate-fed reactors [ARs]), with a corresponding anode potential (E(an)) range of -188 to -4 mV (versus a standard hydrogen electrode [SHE]). For ...[more]

PMID: 21075886

Similar Datasets

Project description:Microbial fuel cells (MFCs) generate energy while aiding the biodegradation of waste through the activity of an electroactive mixed biofilm. Metabolic cooperation is essential for MFCs' efficiency, especially during early colonization. Thus, examining specific ecological processes that drive the assembly of anode biofilms is highly important for shortening startup times and improving MFC performance, making this technology cost-effective and sustainable. Here, we use metagenomics to show that bioaugmentation of the anode surface with a taxonomically defined electroactive consortium, dominated by Desulfuromonas, resulted in an extremely rapid current density generation. Conversely, the untreated anode surface resulted in a highly stochastic and slower biofilm assembly. Remarkably, an efficient anode colonization process was obtained only if wastewater was added, leading to a nearly complete replacement of the bioaugmented community by Geobacter lovleyi Although different approaches to improve MFC startup have been investigated, we propose that only the combination of anode bioaugmentation with wastewater inoculation can reduce stochasticity. Such an approach provides the conditions that support the growth of specific newly arriving species that positively support the fast establishment of a highly functional anode biofilm.IMPORTANCE Mixed microbial communities play important roles in treating wastewater, in producing renewable energy, and in the bioremediation of pollutants in contaminated environments. While these processes are well known, especially the community structure and biodiversity, how to efficiently and robustly manage microbial community assembly remains unknown. Moreover, it has been shown that a high degree of temporal variation in microbial community composition and structure often occurs even under identical environmental conditions. This heterogeneity is directly related to stochastic processes involved in microbial community organization, similarly during the initial stages of biofilm formation on surfaces. In this study, we show that anode surface pretreatment alone is not sufficient for a substantial improvement in startup times in microbial fuel cells (MFCs), as previously thought. Rather, we have discovered that the combination of applying a well-known consortium directly on the anode surface together with wastewater (including the bacteria that they contain) is the optimized management scheme. This allowed a selected colonization process by the wastewater species, which improved the functionality relative to that of untreated systems.

Dataset Information

Influence of external resistance on electrogenesis, methanogenesis, and anode prokaryotic communities in microbial fuel cells.

Publications

Influence of external resistance on electrogenesis, methanogenesis, and anode prokaryotic communities in microbial fuel cells.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets