Quantitative, reagentless, single-step electrochemical detection of anti-DNA antibodies directly in blood serum.
Ontology highlight
ABSTRACT:
SUBMITTER: Ricci F
PROVIDER: S-EPMC3082467 | biostudies-literature | 2010 Mar
REPOSITORIES: biostudies-literature
Publications
Quantitative, reagentless, single-step electrochemical detection of anti-DNA antibodies directly in blood serum.
Ricci Francesco F Adornetto Gianluca G Moscone Danila D Plaxco Kevin W KW Palleschi Giuseppe G
Chemical communications (Cambridge, England) 20100108 10
Here we demonstrate the use of redox labeled double- and single-stranded oligonucleotides as recognition probes for the reagentless, single-step, electrochemical detection of anti-DNA antibodies directly in blood serum. ...[more]
Similar Datasets
Project description:The development of rapid, low-cost point-of-care approaches for the quantitative detection of antibodies would drastically impact global health by shortening the delay between sample collection and diagnosis and by improving the penetration of modern diagnostics into the developing world. Unfortunately, however, current methods for the quantitative detection of antibodies, including ELISAs, Western blots, and fluorescence polarization assays, are complex, multiple-step processes that rely on well-trained technicians working in well-equipped laboratories. In response, we describe here a versatile, DNA-based electrochemical "switch" for the rapid, single-step measurement of specific antibodies directly in undiluted whole blood at clinically relevant low-nanomolar concentrations.
| S-EPMC3866042 | biostudies-literature
Project description:The multiplexed, point-of-care measurement of specific antibodies could improve the speed with which diseases are diagnosed and their treatment initiated. To this end, we are developing E-DNA scaffold sensors, which consist of a rigid, nucleic acid "scaffold" attached on one end to an electrode and presenting both a redox reporter and an epitope on the other. In the absence of antibody, the reporter efficiently transfers electrons when interrogated electrochemically. Binding-induced steric hindrance limits movement, reducing electron transfer in a manner that is both easily measured and quantitatively related to target concentration. Previously we have used monoclonal antibodies to explore the analytical performance of E-DNA sensors, showing that they support the rapid, single-step, quantitative detection of multiple antibodies in small volume samples. Here, in contrast, we employ authentic human samples to better explore the platform's clinical potential. Specifically, we developed E-DNA sensors targeting three HIV-specific antibodies and then compared the analytical and clinical performance of these against those of gold standard serological techniques. Doing so we find that, although the multistep amplification of an ELISA leads to a lower detection limits, the clinical sensitivity of ELISAs, E-DNA sensors and lateral-flow dipsticks are indistinguishable across our test set. It thus appears that, by merging the quantitation and multiplexing of ELISAs with the convenience and speed of dipsticks, E-DNA scaffold sensors could significantly improve on current serological practice.
| S-EPMC8433188 | biostudies-literature
Project description:Biosensors built using ribonucleic acid (RNA) aptamers show promise as tools for point-of-care medical diagnostics, but they remain vulnerable to nuclease degradation when deployed in clinical samples. To explore methods for protecting RNA-based biosensors from such degradation we have constructed and characterized an electrochemical, aptamer-based sensor for the detection of aminoglycosidic antibiotics. We find that while this sensor achieves low micromolar detection limits and subminute equilibration times when challenged in buffer, it deteriorates rapidly when immersed directly in blood serum. In order to circumvent this problem, we have developed and tested sensors employing modified versions of the same aptamer. Our first effort to this end entailed the methylation of all of the 2'-hydroxyl groups outside of the aptamer's antibiotic binding pocket. However, while devices employing this modified aptamer are as sensitive as those employing an unmodified parent, the modification fails to confer greater stability when the sensor is challenged directly in blood serum. As a second potentially naive alternative, we replaced the RNA bases in the aptamer with their more degradation-resistant deoxyribonucleic acid (DNA) equivalents. Surprisingly and unlike control DNA-stem loops employing other sequences, this DNA aptamer retains the ability to bind aminoglycosides, albeit with poorer affinity than the parent RNA aptamer. Unfortunately, however, while sensors fabricated using this DNA aptamer are stable in blood serum, its lower affinity pushes their detection limits above the therapeutically relevant range. Finally, we find that ultrafiltration through a low-molecular-weight-cutoff spin column rapidly and efficiently removes the relevant nucleases from serum samples spiked with gentamicin, allowing the convenient detection of this aminoglycoside at clinically relevant concentrations using the original RNA-based sensor.
| S-EPMC3082472 | biostudies-literature
Project description:The diagnosis, prevention, and treatment of many illnesses, including infectious and autoimmune diseases, would benefit from the ability to measure specific antibodies directly at the point of care. Thus motivated, we designed a wash-free, electrochemical method for the rapid, quantitative detection of specific antibodies directly in undiluted, unprocessed blood serum. Our approach employs short, contiguous polypeptide epitopes coupled to the distal end of an electrode-bound nucleic acid "scaffold" modified with a reporting methylene blue. The binding of the relevant antibody to the epitope reduces the efficiency with which the redox reporter approaches, and thus exchanges electrons with, the underlying sensor electrode, producing readily measurable change in current. To demonstrate the versatility of the approach, we fabricated a set of six such sensors, each aimed at the detection of a different monoclonal antibody. All six sensors are sensitive (subnanomolar detection limits), rapid (equilibration time constants ?8 min), and specific (no appreciable cross reactivity with the targets of the other five). When deployed in a millimeter-scale, an 18-pixel array with each of the six sensors in triplicate support the simultaneous measurement of the concentrations of multiple antibodies in a single, submilliliter sample volume. The described sensor platform thus appears be a relatively general approach to the rapid and specific quantification of antibodies in clinical materials.
| S-EPMC3523736 | biostudies-literature
Project description:BackgroundHuman cytomegalovirus infection is associated with a variety of pathological conditions including retinitis, pneumonia, hepatitis and encephalitis that may be transmitted congenitally, horizontally and parenterally and occurs both as a primary infection and as reactivation in immunocompromised individuals. Currently, there is a need for improved quantitative serological tests to document seropositivity with high sensitivity and specificity.MethodsHere we investigated whether luciferase immunoprecipitation systems (LIPS) would provide a more quantitative and sensitive method for detecting anti-CMV antibodies. Four protein fragments of immunodominant regions of CMV antigens pp150 and pp65 were generated as Renilla luciferase (Ruc) fusion proteins and used in LIPS with two cohorts of CMV positive and negative sera samples previously tested by ELISA.ResultsAnalysis of the antibody responses to two of these antigen fragments, pp150-d1 and pp150-d2, revealed geometric mean antibody titers in the first cohort that were 100-1000 fold higher in the CMV positive sera compared to the CMV negative samples (p < 0.0001) and infection status exactly matched the ELISA results for the 46 samples of the first cohort (100% sensitivity and 100% specificity). Two additional antigen fragments, pp65-d1 and pp65-d2 also showed robust antibody titers in some CMV-infected sera and yielded 50% and 96% sensitivity, respectively. Analysis of a second cohort of 70 samples using a mixture of the 4 antigens, which simplifies data collection and analysis, yielded values which correlated well with the sum of the values from the 4 separate tests (rs = 0.93, p < 0.00001). While comparison of the LIPS results from this second cohort with ELISA showed 100% sensitivity, LIPS detected six additional CMV positive samples that were not detected by ELISA. Heat map analysis revealed that several of the LIPS positive/ELISA negative samples had positive LIPS immunoreactivity with 3-4 of the CMV antigens.ConclusionThese results suggest that LIPS provides a highly robust and quantitative method for studying anti-CMV antibodies and has the potential to more accurately document CMV infection than standard ELISA.
| S-EPMC2683803 | biostudies-literature
Project description:Mycobacterium avium subsp. paratuberculosis (MAP) causes a chronic inflammatory intestinal disease, called Johne's disease (JD) in many ruminants. In the dairy industry, JD is responsible for significant economic losses due to decreased milk production and premature culling of infected animals. Test-and-cull strategy in conjunction with risk management is currently recommended for JD control in dairy herds. However, current diagnostic tests are labor-intensive, time-consuming, and/or too difficult to operate on site. In this study, we developed a new method for the detection of anti-M. paratuberculosis antibodies from sera of M. paratuberculosis-infected animals. M. paratuberculosis antigen-coated magnetic beads were sequentially reacted with bovine serum followed by a horseradish peroxidase (HRP)-labeled secondary antibody. The reaction of HRP with its substrate was then quantitatively measured electrochemically using a redox-active probe, ferrocyanide. After optimization of electrochemical conditions and concentration of the redox-active probe, we showed that the new electrochemical detection method could distinguish samples of M. paratuberculosis-infected cattle from those of uninfected cattle with greater separation between the two groups of samples when compared with a conventional colorimetric testing method. Since electrochemical detection can be conducted with an inexpensive, battery-operated portable device, this new method may form a basis for the development of an on-site diagnostic system for JD.
| S-EPMC8006348 | biostudies-literature
Project description:Here we demonstrate a new class of reagentless, single-step sensors for the detection of proteins and peptides that is the electrochemical analog of fluorescence polarization (fluorescence anisotropy), a versatile optical approach widely employed to this same end. Our electrochemical sensors consist of a redox-reporter-modified protein (the "receptor") site-specifically anchored to an electrode via a short, flexible polypeptide linker. Interaction of the receptor with its binding partner alters the efficiency with which the reporter approaches the electrode surface, thus causing a change in redox current upon voltammetric interrogation. As our first proof-of-principle we employed the bacterial chemotaxis protein CheY as our receptor. Interaction with either of CheY's two binding partners, the P2 domain of the chemotaxis kinase, CheA, or the 16-residue "target region" of the flagellar switch protein, FliM, leads to easily measurable changes in output current that trace Langmuir isotherms within error of those seen in solution. Phosphorylation of the electrode-bound CheY decreases its affinity for CheA-P2 and enhances its affinity for FliM in a manner likewise consistent with its behavior in solution. As expected given the proposed sensor signaling mechanism, the magnitude of the binding-induced signal change depends on the placement of the redox reporter on the receptor. Following these preliminary studies with CheY, we also developed and characterized additional sensors aimed at the detection of specific antibodies using the relevant protein antigens as the receptor. These exhibit excellent detection limits for their targets without the use of reagents or wash steps. This novel, protein-based electrochemical sensing architecture provides a new and potentially promising approach to sensors for the single-step measurement of specific proteins and peptides.
| S-EPMC6021012 | biostudies-literature
Project description:Abstract Objective Real-time reverse transcription-polymerase chain reaction is the gold standard for the diagnosis of COVID-19, but it is necessary to utilize other tests to determine the burden of the disease and the spread of the outbreak such as IgG-, IgM-, and IgA-based antibody detection using enzyme-linked immunosorbent assay (ELISA). Materials and Methods We developed an indirect ELISA assay to quantitatively measure the amount of COVID-19 IgG, IgM, and IgA antibodies present in patient serum, dried blood, and plasma. Results The population cutoff values for positivity were determined by receiver operating characteristic curves to be 1.23 U/mL, 23.09 U/mL, and 6.36 U/mL for IgG, IgM, and IgA, respectively. After albumin subtraction, the specificity remained >98% and the sensitivity was 95.72%, 83.47%, and 82.60%, respectively, for IgG, IgM, and IgA antibodies to the combined spike subunit 1 receptor binding domain and N proteins in serum. Plasma and dried blood spot specimens were also validated on this assay. Conclusion This assay may be used for determining the seroprevalence of SARS-CoV-2 in a population exposed to the virus or in vaccinated individuals.
| S-EPMC8574490 | biostudies-literature
Project description:ELISA and chemiluminescence serological assays for COVID-19 are currently incorporating only one or two SARS-CoV-2 antigens. We developed an automated Western immunoblotting as a complementary serologic assay for COVID-19. The JessTM Simple Western system, an automated capillary-based assay, was used, incorporating an inactivated SARS-CoV-2 lineage 20a strain as the source of antigen, and total immunoglobulins (IgG, IgM, IgA) detection. In total, 602 sera were tested including 223 from RT-PCR-confirmed COVID-19 patients, 76 from patients diagnosed with seasonal HCoVs and 303 from coronavirus-negative control sera. We also compared this assay with the EUROIMMUN® SARS-CoV-2 IgG ELISA kit. Among 223 sera obtained from RT-PCR-confirmed COVID-19 patients, 180/223 (81%) exhibited reactivity against the nucleocapsid and 70/223 (31%) against the spike protein. Nucleocapsid reactivity was further detected in 9/76 (14%) samples collected from patients diagnosed with seasonal HCoVs and in 15/303 (5%) coronavirus-negative control samples. In the subset of sera collected more than 2 weeks after the onset of symptoms, the sensitivity was 94% and the specificity 93%, the latter value probably reflecting cross-reactivity of SARS-CoV-2 with other coronaviruses. The automated Western immunoblotting presented a substantial agreement (90%) with the compared ELISA (Cohen's Kappa=0.64). Automated Western immunoblotting may be used as a second line test to monitor exposure of people to HCoVs including SARS-CoV-2.
| S-EPMC7928199 | biostudies-literature
Project description:Here we have demonstrated a general, sensitive, and selective approach for the detection of macromolecules that bind to specific small molecule recognition elements. Our electrochemical approach utilizes a redox-tagged DNA signaling scaffold that is conjugated to a small molecule recognition element and is covalently attached to an interrogating electrode. The binding of a protein to the small molecule recognition element alters the dynamics of the scaffold, increasing or decreasing the efficiency with which the redox tag collides with the electrode and thus altering the observed faradaic current. We optimized the scaffold using a biotin recognition element and streptavidin as a target to determine the variables that define sensor performance before then applying the approach to detection of anti-digoxigenin antibodies using the steroid as the recognition element. We generated streptavidin sensors exhibiting both signal-on (target binding increases the faradaic current) and signal-off behavior, of which only the signal-off approach was generalizable to the detection of antibodies. Sensors for both targets are sensitive (detection limits in the low nanomolar range), rapid (minutes), reusable, and selective enough to function directly in complex matrices including blood serum, soil, and foodstuffs.
| S-EPMC2862979 | biostudies-literature