Hindered dissolution of fibrin formed under mechanical stress.
Ontology highlight
ABSTRACT: Background
Recent data indicate that stretching forces cause a dramatic decrease in clot volume accompanied by gross conformational changes of fibrin structure.Objective
The present study attempts to characterize the lytic susceptibility of fibrin exposed to mechanical stress as a model for fibrin structures observed in vivo.Methods and results
The relevance of stretched fibrin models was substantiated by scanning electron microscopic (SEM) evaluation of human thrombi removed during surgery, where surface fibrin fibers were observed to be oriented in the direction of shear forces, whereas interior fibers formed a random spatial meshwork. These structural variations were modeled in vitro with fibrin exposed to adjustable mechanical stress. After two- and three-fold longitudinal stretching (2 × S, 3 × S) the median fiber diameter and pore area in SEM images of fibrin decreased two- to three-fold. Application of tissue plasminogen activator (tPA) to the surface of model clots, which contained plasminogen, resulted in plasmin generation which was measured in the fluid phase. After 30-min activation 12.6 ± 0.46 pmol mm(-2) plasmin was released from the non-stretched clot (NS), 5.5 ± 1.11 pmol mm(-2) from 2 × S and 2.3 ± 0.36 pmol mm(-2) from 3 × S clot and this hampered plasmin generation was accompanied by decreased release of fibrin degradation products from stretched fibrins. Confocal microscopic images showed that a green fluorescent protein-fusion variant of tPA accumulated in the superficial layer of NS, but not in stretched fibrin.Conclusion
Mechanical stress confers proteolytic resistance to fibrin, which is a result of impaired plasminogen activation coupled to lower plasmin sensitivity of the denser fibrin network.
SUBMITTER: Varju I
PROVIDER: S-EPMC3093023 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Neutrophils can release extracellular traps (NETs) in infectious, inflammatory and thrombotic diseases. NETs have been detected in deep vein thrombosis, atherothrombosis, stroke, disseminated intravascular coagulation and trauma. We have previously shown that haemodynamic forces trigger rapid NETosis within sterile occlusive thrombi in vitro. Here, we tested the effects of thrombin, fibrin and fibrinolysis on shear-induced NETosis by imaging NETs with Sytox Green during microfluidic perfusion of factor XIIa-inhibited or thrombin-inhibited human whole blood over fibrillar collagen (±tissue factor). For perfusions under venous pressure drops (19?mm Hg/mm-clot), thrombin generation did not alter the near-zero level of NET generation. In contrast, production of thrombin/fibrin led to a twofold reduction in neutrophil accumulation and a sixfold reduction in NET generation after 30 minutes of arterial perfusion (163?mm Hg/mm-clot). Exogenously added tissue type plasminogen activator (tPA) drove robust fibrinolysis; however, tPA did not trigger NETosis under venous flow. In contrast, tPA did enhance NET generation in clots subjected to arterial pressure drops. After 45 minutes of arterial perfusion, clots treated with 30?nM tPA had a threefold increase in total NET production and a twofold increase in normalized NET generation (measured as deoxyribonucleic acid:neutrophil) compared with fibrin-rich clots. Blocking fibrin polymerization resulted in similar level of NET release seen in tPA-treated clots, whereas ?-aminocaproic acid abolished the NET-enhancing effect of tPA. Therefore, fibrin suppresses NET generation and the absence of fibrin promotes NETs. We demonstrated that shear-induced NETosis was strongly inversely correlated with fibrin in sterile occlusive clots.
| S-EPMC7046313 | biostudies-literature
Project description:Ripples in graphene are extensively investigated because they ensure the mechanical stability of two-dimensional graphene and affect its electronic properties. They arise from spontaneous symmetry breaking and are usually manifested in the form of domains with long-range order. It is expected that topological defects accompany a material exhibiting long-range order, whose functionality depends on characteristics of domains and topological defects. However, there remains a lack of understanding regarding ripple domains and their topological defects formed on monolayer graphene. Here we explore configuration of ripple domains and their topological defects in exfoliated monolayer graphenes on SiO2/Si substrates using transverse shear microscope. We observe three-color domains with three different ripple directions, which meet at a core. Furthermore, the closed domain is surrounded by an even number of cores connected together by domain boundaries, similar to topological vortex and anti-vortex pairs. In addition, we have found that axisymmetric three-color domains can be induced around nanoparticles underneath the graphene. This fascinating configuration of ripple domains may result from the intrinsic hexagonal symmetry of two-dimensional graphene, which is supported by theoretical simulation using molecular dynamics. Our findings are expected to play a key role in understanding of ripple physics in graphene and other two-dimensional materials.
| S-EPMC4371081 | biostudies-other
Project description:Actin is one of the main components of the architecture of cells. Actin filaments form different polymer networks with versatile mechanical properties that depend on their spatial organization and the presence of cross-linkers. Here, we investigate the mechanical properties of actin bundles in the absence of cross-linkers. Bundles are polymerized from the surface of mDia1-coated latex beads, and deformed by manipulating both ends through attached beads held by optical tweezers, allowing us to record the applied force. Bundle properties are strikingly different from the ones of a homogeneous isotropic beam. Successive compression and extension leads to a decrease in the buckling force that we attribute to the bundle remaining slightly curved after the first deformation. Furthermore, we find that the bundle is solid, and stiff to bending, along the long axis, whereas it has a liquid and viscous behavior in the transverse direction. Interpretation of the force curves using a Maxwell visco-elastic model allows us to extract the bundle mechanical parameters and confirms that the bundle is composed of weakly coupled filaments. At short times, the bundle behaves as an elastic material, whereas at long times, filaments flow in the longitudinal direction, leading to bundle restructuring. Deviations from the model reveal a complex adaptive rheological behavior of bundles. Indeed, when allowed to anneal between phases of compression and extension, the bundle reinforces. Moreover, we find that the characteristic visco-elastic time is inversely proportional to the compression speed. Actin bundles are therefore not simple force transmitters, but instead, complex mechano-transducers that adjust their mechanics to external stimulation. In cells, where actin bundles are mechanical sensors, this property could contribute to their adaptability.
| S-EPMC5611681 | biostudies-other
Project description:Blood clots perform the mechanical task of stemming the flow of blood.To advance understanding and realistic modeling of blood clot behavior we determined the mechanical properties of the major structural component of blood clots, fibrin fibers.We used a combined atomic force microscopy (AFM)/fluorescence microscopy technique to determine key mechanical properties of single crosslinked and uncrosslinked fibrin fibers.Overall, full crosslinking renders fibers less extensible, stiffer, and less elastic than their uncrosslinked counterparts. All fibers showed stress relaxation behavior (time-dependent weakening) with a fast and a slow relaxation time, 2 and 52 s. In detail, crosslinked and uncrosslinked fibrin fibers can be stretched to 2.5 and 3.3 times their original length before rupturing. Crosslinking increased the stiffness of fibers by a factor of 2, as the total elastic modulus, E(0), increased from 3.9 to 8.0 MPa and the relaxed, elastic modulus, E(infinity), increased from 1.9 to 4.0 MPa upon crosslinking. Moreover, fibers stiffened with increasing strain (strain hardening), as E(0) increased by a factor of 1.9 (crosslinked) and 3.0 (uncrosslinked) at strains epsilon > 110%. At low strains, the portion of dissipated energy per stretch cycle was small (< 10%) for uncrosslinked fibers, but significant (approximately 40%) for crosslinked fibers. At strains > 100%, all fiber types dissipated about 70% of the input energy. We propose a molecular model to explain our data. Our single fiber data can now also be used to construct a realistic, mechanical model of a fibrin network.
| S-EPMC3010862 | biostudies-literature
Project description:Fibrin is a protein polymer that is essential for hemostasis and thrombosis, wound healing, and several other biological functions and pathological conditions that involve extracellular matrix. In addition to molecular and cellular interactions, fibrin mechanics has been recently shown to underlie clot behavior in the highly dynamic intra- and extravascular environments. Fibrin has both elastic and viscous properties. Perhaps the most remarkable rheological feature of the fibrin network is an extremely high elasticity and stability despite very low protein content. Another important mechanical property that is common to many filamentous protein polymers but not other polymers is stiffening occurring in response to shear, tension, or compression. New data has begun to provide a structural basis for the unique mechanical behavior of fibrin that originates from its complex multi-scale hierarchical structure. The mechanical behavior of the whole fibrin gel is governed largely by the properties of single fibers and their ensembles, including changes in fiber orientation, stretching, bending, and buckling. The properties of individual fibrin fibers are determined by the number and packing arrangements of double-stranded half-staggered protofibrils, which still remain poorly understood. It has also been proposed that forced unfolding of sub-molecular structures, including elongation of flexible and relatively unstructured portions of fibrin molecules, can contribute to fibrin deformations. In spite of a great increase in our knowledge of the structural mechanics of fibrin, much about the mechanisms of fibrin's biological functions remains unknown. Fibrin deformability is not only an essential part of the biomechanics of hemostasis and thrombosis, but also a rapidly developing field of bioengineering that uses fibrin as a versatile biomaterial with exceptional and tunable biochemical and mechanical properties.
| S-EPMC5318294 | biostudies-literature
Project description:Compressive mechanical stress-induced cartilage thinning has been characterized as a key step in the progression of temporomandibular joint diseases, such as osteoarthritis. However, the regulatory mechanisms underlying this loss have not been thoroughly studied. Here, we used an established animal model for loading compressive mechanical stress to induce cartilage thinning in vivo. The mechanically stressed mandibular chondrocytes were then isolated to screen potential candidates using a proteomics approach. A total of 28 proteins were identified that were directly or indirectly associated with endoplasmic reticulum stress, including protein disulfide-isomerase, calreticulin, translationally controlled tumor protein, and peptidyl-prolyl cis/trans-isomerase protein. The altered expression of these candidates was validated at both the mRNA and protein levels. The induction of endoplasmic reticulum stress by mechanical stress loading was confirmed by the activation of endoplasmic reticulum stress markers, the elevation of the cytoplasmic Ca(2+) level, and the expansion of endoplasmic reticulum membranes. More importantly, the use of a selective inhibitor to block endoplasmic reticulum stress in vivo reduced the apoptosis observed at the early stages of mechanical stress loading and inhibited the proliferation observed at the later stages of mechanical stress loading. Accordingly, the use of the inhibitor significantly restored cartilage thinning. Taken together, these results demonstrated that endoplasmic reticulum stress is significantly activated in mechanical stress-induced mandibular cartilage thinning and, more importantly, that endoplasmic reticulum stress inhibition alleviates this loss, suggesting a novel pharmaceutical strategy for the treatment of mechanical stress-induced temporomandibular joint diseases.
| S-EPMC3689960 | biostudies-literature
Project description:Polyphosphate (polyP) binds to fibrin(ogen) and alters fibrin structure, generating a heterogeneous network composed of 'knots' interspersed by large pores. Here we show platelet-derived polyP elicits similar structural changes in fibrin and examine the mechanism by which polyP alters fibrin structure. Polymerisation of fibrinogen with thrombin and CaCl2 was studied using spinning disk confocal (SDC) microscopy. PolyP delayed fibrin polymerisation generating shorter protofibrils emanating from a nucleus-type structure. Consistent with this, cascade blue-polyP accumulated in fibrin 'knots'. Protofibril formation was visualized by atomic force microscopy (AFM) ± polyP. In the presence of polyP abundant monomers of longer length were visualised by AFM, suggesting that polyP binds to monomeric fibrin. Shorter oligomers form in the presence of polyP, consistent with the stunted protofibrils visualised by SDC microscopy. We examined whether these structural changes induced by polyP alter fibrin's viscoelastic properties by rheometry. PolyP reduced the stiffness (G') and ability of the fibrin network to deform plastically G'', but to different extents. Consequently, the relative plastic component (loss tangent (G''/G')) was 61?% higher implying that networks containing polyP are less stiff and more plastic. Local rheological measurements, performed using magnetic tweezers, indicate that the fibrin dense knots are stiffer and more plastic, reflecting the heterogeneity of the network. Our data show that polyP impedes fibrin polymerisation, stunting protofibril growth producing 'knotted' regions, which are rich in fibrin and polyP. Consequently, the mechanical properties of the fibrin network are altered resulting in clots with overall reduced stiffness and increased ability to deform plastically.
| S-EPMC5228039 | biostudies-literature
Project description:Background:Excessive mechanical stress causes inflammation and destruction of cartilage and is considered one of the cause of osteoarthritis (OA). Expression of semaphorin 3A (Sema3A), which is an axon guidance molecule, has been confirmed in chondrocytes. However, there are few reports about Sema3A in chondrocytes, and the effects of Sema3A on inflammation in the cartilage are poorly understood. The aim of this study was to examine the role of Sema3A in inflammation caused by high magnitude cyclic tensile strain (CTS). Methods:Expression of Sema3A and its receptors neuropilin-1 (NRP-1) and plexin-A1 (PLXA1) in ATDC5 cells was examined by Western blot analysis. ATDC5 cells were subjected to CTS of 0.5?Hz, 10% elongation with added Sema3A for 3?h. Gene expression of IL-1?, TNF-?, COX-2, MMP-3, and MMP-13 was examined by qPCR analysis. Furthermore, the phosphorylation of AKT, ERK, and NF-?B was detected by Western blot analysis. Results:Added Sema3A inhibited the gene expression of inflammatory cytokines upregulated by CTS in a dose-dependent manner. Addition of Sema3A suppressed the activation of AKT, ERK, and NF-?B in a dose-dependent manner. Conclusions:Sema3A reduces the gene expression of inflammatory cytokines by downregulating the activation of AKT, ERK, and NF-?B pathways in ATDC5 cells under CTS.
| S-EPMC5911320 | biostudies-literature
Project description:Explicit solvent molecular dynamics simulations were used to investigate at atomic resolution the effect of trehalose on a hydrated phospholipid bilayer under mechanical stress (stretching forces imposed in the form of negative lateral pressure). Simulations were performed in the absence or presence of trehalose at 325 K, and with different values for negative lateral pressure. In the concentration regime (2 molal) and range of lateral pressures (1 to -250 bar) investigated, trehalose was found to interact directly with the membrane, partially replacing water molecules in the formation of hydrogen bonds with the lipid headgroups. Similar to previous findings in the context of thermal stress, the number, degree of bridging, and reaching depth of these hydrogen bonds increased with the magnitude of perturbation. However, at the concentration considered, trehalose was not sufficient to preserve the integrity of the membrane structure and to prevent its extreme elongation (and possible disruption) under the effect of stretching forces.
| S-EPMC2553110 | biostudies-other
Project description:Coupling fibrinolytic plasminogen activators to red blood cells (RBCs) has been proposed as an effective, yet safe method of thromboprophylaxis, because of increased circulation lifetime and reduced propensity to induce hemorrhage by selectivity for nascent thrombi rather than pre-formed hemostatic clots.We used confocal microscopy of fluorescently labeled fibrin and erythrocytes in plasma-derived clots to study the spatial dynamics of lysis catalyzed by RBC-coupled vs. free plasminogen activators (RBC-PA vs. PA).Clot lysis catalyzed by free PA progressed gradually and uniformly. In contrast, distinct holes formed surrounding RBC-PA while the rest of the clot remained intact until these holes enlarged sufficiently to merge, causing sudden clot dissolution. Compared with naïve RBCs within clots lysed by free PA, RBC-PA moved faster inside the fibrin network prior to clot dissolution, providing a potential mechanism for spatial propagation of RBC-PA induced lysis. We also showed the focal nature of fibrinolysis by RBC-PA as dense loading of PA onto RBCs initiates more efficient lysis than equal amounts of PA spread sparsely over more RBCs. In an in vitro model of clots exposed to buffer flow, incorporated RBC-PA increased permeability and formed channels eventually triggering clot dissolution, whereas clots containing free PA remained intact.Clot lysis by RBC-PA begins focally, has a longer lag phase when measured by residual mass than homogeneous lysis by PA, is propagated by RBC-PA motility and provides more effective clot reperfusion than free PA, making RBC-PA attractive for short-term thromboprophylaxis.
| S-EPMC2890030 | biostudies-literature