Project description:Many applications in molecular biology can benefit from improved PCR amplification of DNA segments containing a wide range of GC content. Conventional PCR amplification of DNA sequences with regions of GC less than 30%, or higher than 70%, is complex due to secondary structures that block the DNA polymerase as well as mispriming and mis-annealing of the DNA. This complexity will often generate incomplete or nonspecific products that hamper downstream applications. In this study, we address multiplexed PCR amplification of DNA segments containing a wide range of GC content. In order to mitigate amplification complications due to high or low GC regions, we tested a combination of different PCR cycling conditions and chemical additives. To assess the fate of specific oligonucleotide (oligo) species with varying GC content in a multiplexed PCR, we developed a novel method of sequence analysis. Here we show that subcycling during the amplification process significantly improved amplification of short template pools (~200 bp), particularly when the template contained a low percent of GC. Furthermore, the combination of subcycling and 7-deaza-dGTP achieved efficient amplification of short templates ranging from 10-90% GC composition. Moreover, we found that 7-deaza-dGTP improved the amplification of longer products (~1000 bp). These methods provide an updated approach for PCR amplification of DNA segments containing a broad range of GC content.
Project description:A theoretical analysis is presented with experimental confirmation to conclusively demonstrate the critical role that annealing plays in efficient PCR amplification of GC-rich templates. The analysis is focused on the annealing of primers at alternative binding sites (competitive annealing) and the main result is a quantitative expression of the efficiency (eta) of annealing as a function of temperature (T(A)), annealing period (t(A)), and template composition. The optimal efficiency lies in a narrow region of T(A) and t(A) for GC-rich templates and a much broader region for normal GC templates. To confirm the theoretical findings, the following genes have been PCR amplified from human cDNA template: ARX and HBB (with 78.72% and 52.99% GC, respectively). Theoretical results are in excellent agreement with the experimental findings. Optimum annealing times for GC-rich genes lie in the range of 3-6s and depend on annealing temperature. Annealing times greater than 10s yield smeared PCR amplified products. The non-GC-rich gene did not exhibit this sensitivity to annealing times. Theory and experimental results show that shorter annealing times are not only sufficient but can actually aid in more efficient PCR amplification of GC-rich templates.
Project description:We have engineered thermostable KlenTaq DNA polymerase variants called RIII H20, RIV A8 and RIV D15 that produce error signatures specific for 5-methylcytosine (5mC) without prior chemical treatment of the DNA samples. These signatures are amplified during DNA amplicon library preparation and are detected by NGS. This method was applied to distinguish C from 5mC in DNA templates generated by PCR (unmodified and methylated using the CpG Methyltransferase (M.SssI)). Finally, RIV A8 was used to detect 5mC in HeLa human genomic DNA (native methylation and supplementary methylated using the CpG Methyltransferase (M.SssI))
Project description:This protocol describes the design of a minimal DNA template and the steps for enzymatic amplification, enabling rapid prototyping of assayable proteins in less than 24 h using cell-free expression. After receiving DNA from a vendor, the gene fragment is PCR-amplified, cut, circularized, and cryo-banked. A small amount of the banked DNA is then diluted and amplified significantly (up to 106x) using isothermal rolling circle amplification (RCA). RCA can yield microgram quantities of the minimal expression template from picogram levels of starting material (mg levels if all starting synthetic fragment is used). In this work, a starting amount of 20 pg resulted in 4 µg of the final product. The resulting RCA product (concatemer of the minimal template) can be added directly to a cell-free reaction with no purification steps. Due to this method being entirely PCR-based, it may enable future high-throughput screening efforts when coupled with automated liquid handling systems.
Project description:We have engineered the thermostable KlenTaq DNA polymerase variant called RIV A8 that produces error signatures specific for 5-methylcytosine (5mC) and 5-hydroxycytosine (5hmC) without prior chemical treatment of the DNA samples. These signatures are amplified during DNA amplicon library preparation and are detected by NGS. This method was applied to distinguish C from 5mC and C from 5hmC in DNA templates generated by PCR using modified dCTPs (unmodified by using dCTP, methylated by using d5mCTP, hydroxymethylated by using d5hmCTP).
Project description:Bias and background issues make efficient amplification of complex template mixes such as aptamer and genomic DNA libraries via conventional PCR methods difficult; emulsion PCR is being increasingly used in such scenarios to circumvent these problems. However, before products generated via emulsion PCR can be used in downstream workflows, they need to be recovered from the water-in-oil emulsion. Often, emulsions are broken following amplification using volatile organic solvents, and product is subsequently isolated via precipitation. Unfortunately, the use of such solvents requires the implementation of special environmental controls, and the yield and purity of DNA isolated by precipitation can be highly variable. Here, we describe the optimization of a simple protocol which can be used to recover products following emulsion PCR using a 2-butanol extraction and subsequent DNA isolation via a commercially available clean-up kit. This protocol avoids the use of volatile solvents and precipitation steps, and we demonstrate that it can be used to reliably recover DNA from water-in-oil emulsions with efficiencies as high as 90%. Furthermore, we illustrate the practical applicability of this protocol by demonstrating how it can be implemented to recover a complex random aptamer library following amplification via emulsion PCR.
Project description:BackgroundThe microsporidian parasite Nosema ceranae is a global problem in honeybee populations and is known to cause winter mortality. A sensitive and rapid tool for stable quantitative detection is necessary to establish further research related to the diagnosis, prevention, and treatment of this pathogen.ObjectivesThe present study aimed to develop a quantitative method that incorporates ultra-rapid real-time quantitative polymerase chain reaction (UR-qPCR) for the rapid enumeration of N. ceranae in infected bees.MethodsA procedure for UR-qPCR detection of N. ceranae was developed, and the advantages of molecular detection were evaluated in comparison with microscopic enumeration.ResultsUR-qPCR was more sensitive than microscopic enumeration for detecting two copies of N. ceranae DNA and 24 spores per bee. Meanwhile, the limit of detection by microscopy was 2.40 × 10⁴ spores/bee, and the stable detection level was ≥ 2.40 × 10⁵ spores/bee. The results of N. ceranae calculations from the infected honeybees and purified spores by UR-qPCR showed that the DNA copy number was approximately 8-fold higher than the spore count. Additionally, honeybees infected with N. ceranae with 2.74 × 10⁴ copies of N. ceranae DNA were incapable of detection by microscopy. The results of quantitative analysis using UR-qPCR were accomplished within 20 min.ConclusionsUR-qPCR is expected to be the most rapid molecular method for Nosema detection and has been developed for diagnosing nosemosis at low levels of infection.
Project description:Polyacrylamide hydrogels are interesting materials for studying cells and cell-material interactions, thanks to the possibility of precisely adjusting their stiffness, shear modulus and porosity during synthesis, and to the feasibility of processing and manufacturing them towards structures and devices with controlled morphology and topography. In this study a novel approach, related to the processing of polyacrylamide hydrogels using soft-lithography and employing microstructured templates, is presented. The main novelty relies on the design and manufacturing processes used for achieving the microstructured templates, which are transferred by soft-lithography, with remarkable level of detail, to the polyacrylamide hydrogels. The conceived process is demonstrated by patterning polyacrylamide substrates with a set of vascular-like and parenchymal-like textures, for controlling cell populations. Final culture of amoeboid cells, whose dynamics is affected by the polyacrylamide patterns, provides a preliminary validation of the described strategy and helps to discuss its potentials.
Project description:A target length limitation to PCR amplification of DNA has been identified and addressed. Concomitantly, the base-pair fidelity, the ability to use PCR products as primers, and the maximum yield of target fragment were increased. These improvements were achieved by the combination of a high level of an exonuclease-free, N-terminal deletion mutant of Taq DNA polymerase, Klentaq1, with a very low level of a thermostable DNA polymerase exhibiting a 3'-exonuclease activity (Pfu, Vent, or Deep Vent). At least 35 kb can be amplified to high yields from 1 ng of lambda DNA template.
Project description:Pyrosequencing is a highly effective method for quantitatively genotyping short genetic sequences, but it currently is hampered by a labor-intensive sample preparation process designed to isolate single-stranded DNA from double-stranded products generated by conventional PCR. Here linear-after-the-exponential (LATE)-PCR is introduced as an efficient and potentially automatable method of directly amplifying single-stranded DNA for pyrosequencing, thereby eliminating the need for solid-phase sample preparation and reducing the risk of laboratory contamination. These improvements are illustrated for single-nucleotide polymorphism genotyping applications, including an integrated single-cell-through-sequencing assay to detect a mutation at the globin IVS 110 site that frequently is responsible for beta-thalassemia.