Dataset Information

Experimental Validation of a Fundamental Model for PCR Efficiency.

ABSTRACT: Recently a theoretical analysis of PCR efficiency has been published by Booth et al., (2010). The PCR yield is the product of three efficiencies: (i) the annealing efficiency is the fraction of templates that form binary complexes with primers during annealing, (ii)the polymerase binding efficiency is the fraction of binary complexes that bind to polymerase to form ternary complexes and (iii)the elongation efficiency is the fraction of ternary complexes that extend fully. Yield is controlled by the smallest of the three efficiencies and control could shift from one type of efficiency to another over the course of a PCR experiment. Experiments have been designed that are specifically controlled by each one of the efficiencies and the results are consistent with the mathematical model. The experimental data has also been used to quantify six key parameters of the theoretical model. An important application of the fully characterized model is to calculate initial template concentration from real-time PCR data. Given the PCR protocol, the midpoint cycle number (where the template concentration is half that of the final concentration) can be theoretically determined and graphed for a variety of initial DNA concentrations. Real-time results can be used to calculate the midpoint cycle number and consequently the initial DNA concentration, using this graph. The application becomes particularly simple if a conservative PCR protocol is followed where only the annealing efficiency is controlling.

SUBMITTER: Louw TM

PROVIDER: S-EPMC3148806 | biostudies-literature | 2011 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Experimental Validation of a Fundamental Model for PCR Efficiency.

Louw Tobias M TM Booth Christine S CS Pienaar Elsje E Termaat Joel R JR Whitney Scott E SE Viljoen Hendrik J HJ

Chemical engineering science 20110401 8

Recently a theoretical analysis of PCR efficiency has been published by Booth et al., (2010). The PCR yield is the product of three efficiencies: (i) the annealing efficiency is the fraction of templates that form binary complexes with primers during annealing, (ii)the polymerase binding efficiency is the fraction of binary complexes that bind to polymerase to form ternary complexes and (iii)the elongation efficiency is the fraction of ternary complexes that extend fully. Yield is controlled by ...[more]

PMID: 21822325

Similar Datasets

Project description:Using a grating interferometer, a conventional x-ray cone beam computed tomography (CT) data acquisition system can be used to simultaneously generate both conventional absorption CT (ACT) and differential phase contrast CT (DPC-CT) images from a single data acquisition. Since the two CT images were extracted from the same set of x-ray projections, it is expected that intrinsic relationships exist between the noise properties of the two contrast mechanisms. The purpose of this paper is to investigate these relationships.First, a theoretical framework was developed using a cascaded system model analysis to investigate the relationship between the noise power spectra (NPS) of DPC-CT and ACT. Based on the derived analytical expressions of the NPS, the relationship between the spatial-frequency-dependent noise equivalent quanta (NEQ) of DPC-CT and ACT was derived. From these fundamental relationships, the NPS and NEQ of the DPC-CT system can be derived from the corresponding ACT system or vice versa. To validate these theoretical relationships, a benchtop cone beam DPC-CT/ACT system was used to experimentally measure the modulation transfer function (MTF) and NPS of both DPC-CT and ACT. The measured three-dimensional (3D) MTF and NPS were then combined to generate the corresponding 3D NEQ.Two fundamental relationships have been theoretically derived and experimentally validated for the NPS and NEQ of DPC-CT and ACT: (1) the 3D NPS of DPC-CT is quantitatively related to the corresponding 3D NPS of ACT by an inplane-only spatial-frequency-dependent factor 1∕f (2), the ratio of window functions applied to DPC-CT and ACT, and a numerical factor C(g) determined by the geometry and efficiency of the grating interferometer. Note that the frequency-dependent factor is independent of the frequency component f(z) perpendicular to the axial plane. (2) The 3D NEQ of DPC-CT is related to the corresponding 3D NEQ of ACT by an f (2) scaling factor and numerical factors that depend on both the attenuation and refraction properties of the image object, as well as C(g) and the MTF of the grating interferometer.The performance of a DPC-CT system is intrinsically related to the corresponding ACT system. As long as the NPS and NEQ of an ACT system is known, the corresponding NPS and NEQ of the DPC-CT system can be readily estimated using additional characteristics of the grating interferometer.

Dataset Information

Experimental Validation of a Fundamental Model for PCR Efficiency.

Publications

Experimental Validation of a Fundamental Model for PCR Efficiency.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets