QTL mapping in outbred half-sib families using Bayesian model selection.
Ontology highlight
ABSTRACT:
SUBMITTER: Fang M
PROVIDER: S-EPMC3183946 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Key messageGenomic prediction of GCA effects based on model training with full-sib rather than half-sib families yields higher short- and long-term selection gain in reciprocal recurrent genomic selection for hybrid breeding, if SCA effects are important. Reciprocal recurrent genomic selection (RRGS) is a powerful tool for ensuring sustainable selection progress in hybrid breeding. For training the statistical model, one can use half-sib (HS) or full-sib (FS) families produced by inter-population crosses of candidates from the two parent populations. Our objective was to compare HS-RRGS and FS-RRGS for the cumulative selection gain ([Formula: see text]), the genetic, GCA and SCA variances ([Formula: see text],[Formula: see text], [Formula: see text]) of the hybrid population, and prediction accuracy ([Formula: see text]) for GCA effects across cycles. Using SNP data from maize and wheat, we simulated RRGS programs over 10 cycles, each consisting of four sub-cycles with genomic selection of [Formula: see text] out of 950 candidates in each parent population. Scenarios differed for heritability [Formula: see text] and the proportion [Formula: see text] of traits, training set (TS) size ([Formula: see text]), and maize vs. wheat. Curves of [Formula: see text] over selection cycles showed no crossing of both methods. If [Formula: see text] was high, [Formula: see text] was generally higher for FS-RRGS than HS-RRGS due to higher [Formula: see text]. In contrast, HS-RRGS was superior or on par with FS-RRGS, if [Formula: see text] or [Formula: see text] and [Formula: see text] were low. [Formula: see text] showed a steeper increase and higher selection limit for scenarios with low [Formula: see text], high [Formula: see text] and large [Formula: see text]. [Formula: see text] and even more so [Formula: see text] decreased rapidly over cycles for both methods due to the high selection intensity and the role of the Bulmer effect for reducing [Formula: see text]. Since the TS for FS-RRGS can additionally be used for hybrid prediction, we recommend this method for achieving simultaneously the two major goals in hybrid breeding: population improvement and cultivar development.
| S-EPMC10471712 | biostudies-literature
Project description:Quantitative trait locus (QTL) identification in perennial fruit crops is impeded largely by their lengthy generation time, resulting in costly and labor-intensive maintenance of breeding programs. In a grapevine (genus Vitis) breeding program, although experimental families are typically unreplicated, the genetic backgrounds may contain similar progenitors previously selected due to their contribution of favorable alleles. In this study, we investigated the utility of joint QTL identification provided by analyzing half-sib families. The genetic control of powdery mildew was studied using two half-sib F1 families, namely GE0711/1009 (MN1264 × MN1214; N = 147) and GE1025 (MN1264 × MN1246; N = 125) with multiple species in their ancestry. Maternal genetic maps consisting of 1077 and 1641 single nucleotide polymorphism (SNP) markers, respectively, were constructed using a pseudo-testcross strategy. Ratings of field resistance to powdery mildew were obtained based on whole-plant evaluation of disease severity. This 2-year analysis uncovered two QTLs that were validated on a consensus map in these half-sib families with improved precision relative to the parental maps. Examination of haplotype combinations based on the two QTL regions identified strong association of haplotypes inherited from 'Seyval blanc', through MN1264, with powdery mildew resistance. This investigation also encompassed the use of microsatellite markers to establish a correlation between 206-bp (UDV-015b) and 357-bp (VViv67) fragment sizes with resistance-carrying haplotypes. Our work is one of the first reports in grapevine demonstrating the use of SNP-based maps and haplotypes for QTL identification and tagging of powdery mildew resistance in half-sib families.
| S-EPMC5226326 | biostudies-literature
Project description:Statistical methods for mapping quantitative trait loci (QTLs) in full-sib forest trees, in which the number of alleles and linkage phase can vary from locus to locus, are still not well established. Previous studies assumed that the QTL segregation pattern was fixed throughout the genome in a full-sib family, despite the fact that this pattern can vary among regions of the genome. In this paper, we propose a method for selecting the appropriate model for QTL mapping based on the segregation of different types of markers and QTLs in a full-sib family. The QTL segregation patterns were classified into three types: test cross (1:1 segregation), F(2) cross (1:2:1 segregation) and full cross (1:1:1:1 segregation). Akaike's information criterion (AIC), the Bayesian information criterion (BIC) and the Laplace-empirical criterion (LEC) were used to select the most likely QTL segregation pattern. Simulations were used to evaluate the power of these criteria and the precision of parameter estimates. A Windows-based software was developed to run the selected QTL mapping method. A real example is presented to illustrate QTL mapping in forest trees based on an integrated linkage map with various segregation markers. The implications of this method for accurate QTL mapping in outbred species are discussed.
| S-EPMC3459413 | biostudies-literature
Project description:Jatropha (Jatropha curcas) has become one of the most important species for producing biofuels. Currently, Genotype x Environment (GxE) interaction is the biggest challenge that breeders should solve to increase the section accuracy in the plant breeding. Therefore, the objectives in this study were to estimate the parameters in the 180 half-sib families in Jatropha evaluated for five production years, to verify the significance of the GxE interaction variance, to evaluate the adaptability and stability for each family based on three prediction methods, to select superior half-sib families based on the adaptability and stability analyses, and to predict the accuracy for the sixth production year. Jatropha half-sib families were classified and selected using the follow adaptability and stability methods: linear regression, bi-segmented linear regression and mixed models concepts called harmonic mean of the relative performance of genetic values (HMRPGV). The prediction accuracy was estimated by the Pearson correlation between the predicted genetic values by adaptability and stability methods and the phenotypic value in the sixth production year. In result, most half-sib families were classified as general adaptability and general stability for the evaluated traits. The selection gain obtained via HMRPGV was higher than other methods. The prediction accuracy for the sixth production year was 0.45. Therefore, HMRPGV is efficient to maximize the genetic gain, and it can be a useful strategy to select genotype with high adaptability and stability in Jatropha breeding as well as other species that should be evaluated for many years to take a suitable selection accuracy.
| S-EPMC6042709 | biostudies-literature
Project description:Autosomal recessive mental retardation (AR-MR) may account for up to 25% of genetic mental retardation (MR). So far, mapping of AR-MR genes in consanguineous families has resulted in six nonsyndromic genes, whereas more than 2000 genes might contribute to AR-MR. We propose to use outbred families with multiple affected siblings for AR-MR gene identification. Homozygosity mapping in ten outbred families with affected brother-sister pairs using a 250 K single nucleotide polymorphism array revealed on average 57 homozygous regions over 1 Mb in size per affected individual (range 20-74). Of these, 21 homozygous regions were shared between siblings on average (range 8-36). None of the shared regions of homozygosity (SROHs) overlapped with the nonsyndromic genes. A total of 13 SROHs had an overlap with previously reported loci for AR-MR, namely with MRT8, MRT9, MRT10 and MRT11. Among these was the longest observed SROH of 11.0 Mb in family ARMR1 on chromosome 19q13, which had 2.9 Mb (98 genes) in common with the 5.4 Mb MRT11 locus (195 genes). These data support that homozygosity mapping in outbred families may contribute to identification of novel AR-MR genes.
| S-EPMC3083606 | biostudies-literature
Project description:Spatio-temporal analysis of small area health data often involves choosing a fixed set of predictors prior to the final model fit. In this paper, we propose a spatio-temporal approach of Bayesian model selection to implement model selection for certain areas of the study region as well as certain years in the study time line. Here, we examine the usefulness of this approach by way of a large-scale simulation study accompanied by a case study. Our results suggest that a special case of the model selection methods, a mixture model allowing a weight parameter to indicate if the appropriate linear predictor is spatial, spatio-temporal, or a mixture of the two, offers the best option to fitting these spatio-temporal models. In addition, the case study illustrates the effectiveness of this mixture model within the model selection setting by easily accommodating lifestyle, socio-economic, and physical environmental variables to select a predominantly spatio-temporal linear predictor.
| S-EPMC5217709 | biostudies-literature
Project description:In disease mapping where predictor effects are to be modeled, it is often the case that sets of predictors are fixed, and the aim is to choose between fixed model sets. Model selection methods, both Bayesian model selection and Bayesian model averaging, are approaches within the Bayesian paradigm for achieving this aim. In the spatial context, model selection could have a spatial component in the sense that some models may be more appropriate for certain areas of a study region than others. In this work, we examine the use of spatially referenced Bayesian model averaging and Bayesian model selection via a large-scale simulation study accompanied by a small-scale case study. Our results suggest that BMS performs well when a strong regression signature is found.
| S-EPMC5374035 | biostudies-literature
Project description:In livestock, current statistical approaches utilize extensive molecular data, e.g., single nucleotide polymorphisms (SNPs), to improve the genetic evaluation of individuals. The number of model parameters increases with the number of SNPs, so the multicollinearity between covariates can affect the results obtained using whole genome regression methods. In this study, dependencies between SNPs due to linkage and linkage disequilibrium among the chromosome segments were explicitly considered in methods used to estimate the effects of SNPs. The population structure affects the extent of such dependencies, so the covariance among SNP genotypes was derived for half-sib families, which are typical in livestock populations. Conditional on the SNP haplotypes of the common parent (sire), the theoretical covariance was determined using the haplotype frequencies of the population from which the individual parent (dam) was derived. The resulting covariance matrix was included in a statistical model for a trait of interest, and this covariance matrix was then used to specify prior assumptions for SNP effects in a Bayesian framework. The approach was applied to one family in simulated scenarios (few and many quantitative trait loci) and using semireal data obtained from dairy cattle to identify genome segments that affect performance traits, as well as to investigate the impact on predictive ability. Compared with a method that does not explicitly consider any of the relationship among predictor variables, the accuracy of genetic value prediction was improved by 10-22%. The results show that the inclusion of dependence is particularly important for genomic inference based on small sample sizes.
| S-EPMC5015933 | biostudies-literature
Project description:In developing countries, the sweetpotato, Ipomoea batatas (L.) Lam. [Formula: see text], is an important autopolyploid species, both socially and economically. However, quantitative trait loci (QTL) mapping has remained limited due to its genetic complexity. Current fixed-effect models can fit only a single QTL and are generally hard to interpret. Here, we report the use of a random-effect model approach to map multiple QTL based on score statistics in a sweetpotato biparental population ('Beauregard' × 'Tanzania') with 315 full-sibs. Phenotypic data were collected for eight yield component traits in six environments in Peru, and jointly adjusted means were obtained using mixed-effect models. An integrated linkage map consisting of 30,684 markers distributed along 15 linkage groups (LGs) was used to obtain the genotype conditional probabilities of putative QTL at every centiMorgan position. Multiple interval mapping was performed using our R package QTLpoly and detected a total of 13 QTL, ranging from none to four QTL per trait, which explained up to 55% of the total variance. Some regions, such as those on LGs 3 and 15, were consistently detected among root number and yield traits, and provided a basis for candidate gene search. In addition, some QTL were found to affect commercial and noncommercial root traits distinctly. Further best linear unbiased predictions were decomposed into additive allele effects and were used to compute multiple QTL-based breeding values for selection. Together with quantitative genotyping and its appropriate usage in linkage analyses, this QTL mapping methodology will facilitate the use of genomic tools in sweetpotato breeding as well as in other autopolyploids.
| S-EPMC7337090 | biostudies-literature
Project description:BackgroundBetter understanding of genetic structure of economic traits is crucial for identification and selection of superior genotypes in specific breeding programs. Best linear unbiased prediction (BLUP) is the most efficient method in this regard, which is poorly used in forage plant breeding. The present study aimed to assess genetic variation, estimate genetic parameters, and predict breeding values of five essential traits in full sib families (recognized by EST-SSR markers) of tall fescue using REML/BLUP procedure.MethodForty-two full-sib families of tall fescue (included of 120 individual genotypes), recognized by EST-SSR markers along with twenty-one their corresponding parental genotypes were assessed for biomass production and agro-morphological traits at three harvests (spring, summer, and autumn) in the field during 4 years (2017-2020).ResultsConsiderable genotypic variability was observed for all traits. Low narrow-sense heritability (h2n) for dry forage yield (DFY) at three harvest indicates that non-additive gene actions may play an important role in the inheritance of this trait. Higher h2n of yield related traits and flowering time and also significant genetic correlation of these traits with forage yield, suggests that selection based on these traits may lead to indirect genetic improvement of DFY.ConclusionOur results showed the adequacy of REML/BLUP procedure for identification and selection of preferable parental genotypes and progenies with higher breeding values for future breeding programs such as variety development in tall fescue. Parental genotypes 21 M, 1 M, and 20 L were identified as superior and stable genotypes and could also produce the best hybrid combinations when they were mostly used as maternal parent.
| S-EPMC9199132 | biostudies-literature