Dataset Information

Preparation and characterization of superhydrophobic surfaces based on hexamethyldisilazane-modified nanoporous alumina.

ABSTRACT: Superhydrophobic nanoporous anodic aluminum oxide (alumina) surfaces were prepared using treatment with vapor-phase hexamethyldisilazane (HMDS). Nanoporous alumina substrates were first made using a two-step anodization process. Subsequently, a repeated modification procedure was employed for efficient incorporation of the terminal methyl groups of HMDS to the alumina surface. Morphology of the surfaces was characterized by scanning electron microscopy, showing hexagonally ordered circular nanopores with approximately 250 nm in diameter and 300 nm of interpore distances. Fourier transform infrared spectroscopy-attenuated total reflectance analysis showed the presence of chemically bound methyl groups on the HMDS-modified nanoporous alumina surfaces. Wetting properties of these surfaces were characterized by measurements of the water contact angle which was found to reach 153.2 ± 2°. The contact angle values on HMDS-modified nanoporous alumina surfaces were found to be significantly larger than the average water contact angle of 82.9 ± 3° on smooth thin film alumina surfaces that underwent the same HMDS modification steps. The difference between the two cases was explained by the Cassie-Baxter theory of rough surface wetting.

SUBMITTER: Tasaltin N

PROVIDER: S-EPMC3212001 | biostudies-literature | 2011 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Preparation and characterization of superhydrophobic surfaces based on hexamethyldisilazane-modified nanoporous alumina.

Tasaltin Nevin N Sanli Deniz D Jonáš Alexandr A Kiraz Alper A Erkey Can C

Nanoscale research letters 20110809

Superhydrophobic nanoporous anodic aluminum oxide (alumina) surfaces were prepared using treatment with vapor-phase hexamethyldisilazane (HMDS). Nanoporous alumina substrates were first made using a two-step anodization process. Subsequently, a repeated modification procedure was employed for efficient incorporation of the terminal methyl groups of HMDS to the alumina surface. Morphology of the surfaces was characterized by scanning electron microscopy, showing hexagonally ordered circular nanop ...[more]

PMID: 21827683

Similar Datasets

Project description:Coalescence-induced condensate droplet jumping from superhydrophobic surfaces can be exploited in condensation heat-transfer enhancement, imparting self-cleaning behavior to surfaces, anti-icing coatings, and other industrial uses. An intriguing application would exploit this phenomenon to achieve thermal rectification using a sealed vapor chamber with opposing superhydrophilic and superhydrophobic surfaces. During forward operation, continuous evaporation occurs from the heated superhydrophilic evaporator surface; self-propelled jumping returns the condensate droplets from the cooler superhydrophobic surface to the evaporator, allowing passive recirculation of the working fluid without a reliance on gravity or capillary wicking for fluid return. In reverse operation, when the superhydrophobic surface is heated, the absence of a mechanism for fluid return from the cooler superhydrophilic side to the evaporator restricts heat transport across the (low conductivity) vapor gap. The effectiveness of this jumping-droplet thermal diode can be enhanced by maximizing the distance between the opposing superhydrophobic and superhydrophilic surfaces. It is, therefore, important to investigate the height to which the condensate droplets jump from the superhydrophobic surfaces such that replenishment of liquid to the superhydrophilic surface is maintained. In this study, we systematically investigate the height to which the condensate droplets jump from the hierarchical superhydrophobic surfaces having truncated microcones coated with nanostructures. The condensate droplet jumping height increases with a decrease in microcone pitch. A general theoretical model that accounts for surface adhesion, line tension, and initial wetting states of multiple coalescing droplets of different radii is used to predict and explain the experimentally observed trend of droplet jumping height with surface roughness. The insights provided regarding the effect of surface topography on droplet jumping height are critical to the design of high-performance thermal diode devices.

Dataset Information

Preparation and characterization of superhydrophobic surfaces based on hexamethyldisilazane-modified nanoporous alumina.

Publications

Preparation and characterization of superhydrophobic surfaces based on hexamethyldisilazane-modified nanoporous alumina.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets