Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Black carbon as an additional indicator of the adverse health effects of airborne particles compared with PM10 and PM2.5.

ABSTRACT:

Background

Current air quality standards for particulate matter (PM) use the PM mass concentration [PM with aerodynamic diameters ≤ 10 μm (PM(10)) or ≤ 2.5 μm (PM(2.5))] as a metric. It has been suggested that particles from combustion sources are more relevant to human health than are particles from other sources, but the impact of policies directed at reducing PM from combustion processes is usually relatively small when effects are estimated for a reduction in the total mass concentration.

Objectives

We evaluated the value of black carbon particles (BCP) as an additional indicator in air quality management.

Methods

We performed a systematic review and meta-analysis of health effects of BCP compared with PM mass based on data from time-series studies and cohort studies that measured both exposures. We compared the potential health benefits of a hypothetical traffic abatement measure, using near-roadway concentration increments of BCP and PM(2.5) based on data from prior studies.

Results

Estimated health effects of a 1-μg/m3 increase in exposure were greater for BCP than for PM(10) or PM(2.5), but estimated effects of an interquartile range increase were similar. Two-pollutant models in time-series studies suggested that the effect of BCP was more robust than the effect of PM mass. The estimated increase in life expectancy associated with a hypothetical traffic abatement measure was four to nine times higher when expressed in BCP compared with an equivalent change in PM(2.5) mass.

Conclusion

BCP is a valuable additional air quality indicator to evaluate the health risks of air quality dominated by primary combustion particles.

SUBMITTER: Janssen NA

PROVIDER: S-EPMC3261976 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Impact of COVID-19 restrictions on hourly levels of PM10, PM2.5 and black carbon at an industrial suburban site in northern Spain.

Project description:Due to the COVID-19 pandemic, lockdown restrictions were established around the world. Many studies have assessed whether these restrictions affected atmospheric pollution. Comparison between them is difficult as the periods of time considered are generally not the same and thus, different conclusions may be reached. Besides, most of them consider mean daily pollutant concentration, despite differences being observed according to the time of day. In this study, the hourly levels of PM10, PM2.5 and black carbon (BC) in an industrial suburban area in the north of Spain were analysed from May 2019 to June 2020 and compared with those from the literature, using the same period in each case. In general, the highest concentrations were reached when the wind direction came from the southwest (where a steelworks, a coal-fired power plant and other industries are located) and during the night-time, both before and during the lockdown. The highest concentrations of PM10, PM2.5 and BC were observed from December to February (on average: 45, 17 and 1.3 μg m-3, respectively). The decrease/increase in those pollutants levels during the lockdown were found to be highly dependent on the period considered. Indeed, PM10 can be found to decrease by up to 39% or increase by 12%; PM2.5 can decrease by 21% or increase by up to 36%; and BC, although it generally decreases (by up to 42%), can increase by 7.4%.

| S-EPMC10089665 | biostudies-literature

Airborne PM2.5 samples

Project description:Airborne PM2.5 samples Metagenome

| PRJNA810770 | ENA

Nanoscale characterization of PM2.5 airborne pollutants reveals high adhesiveness and aggregation capability of soot particles.

Project description:In 2012 air pollutants were responsible of seven million human death worldwide, and among them particulate matter with an aerodynamic diameter of 2.5 micrometers or less (PM2.5) are the most hazardous because they are small enough to invade even the smallest airways and penetrate to the lungs. During the last decade the size, shape, composition, sources and effect of these particles on human health have been studied. However, the noxiousness of these particles not only relies on their chemical toxicity, but particle morphology and mechanical properties affect their thermodynamic behavior, which has notable impact on their biological activity. Therefore, correlating the physical, mechanical and chemical properties of PM2.5 airborne pollutants should be the first step to characterize their interaction with other bodies but, unfortunately, such analysis has never been reported before. In this work, we present the first nanomechanical characterization of the most abundant and universal groups of PM2.5 airborne pollutants and, by means of atomic force microscope (AFM) combined with other characterization tools, we observe that fluffy soot aggregates are the most sticky and unstable. Our experiments demonstrate that such particles show strong adhesiveness and aggregation, leading to a more diverse composition and compiling all possible toxic chemicals.

| S-EPMC4503936 | biostudies-literature

Dataset of Polycyclic aromatic hydrocarbons and trace elements in PM2.5 and PM10 atmospheric particles from two locations in North-Western Greece.

Project description:This work presents information regarding PM10, PM2.5, Polycyclic Aromatic Hydrocarbons (PAHs), and trace elements that were obtained from two sampling stations, located in the region of Western Macedonia (North-Western Greece), over the course of a 12-month period. Τhe first sampling station was located near the village of Pontokomi (Station 1) and the second (Station 2) in the rural area of Petrana (Fig 1). Specifically, for each location, daily particulate samples PM10 (total 58 samples) and PM2.5 (total 64 samples) were collected. Moreover, and again for each location, 50 samples (22 PM10 and 28 PM2.5) were further analyzed for the determination of 15 (PAHs) and 72 samples (36 PM10 and 36 PM2.5) were further analyzed for the determination of a total of 17 trace elements. Thus, a total of approximately 10 samples per month was obtained from each sampling station (122 samples per sampling station over the course of 12 months). The samples were collected using two low volume samplers, LVS 3.1 and PNS16T-3.1 (Comde-Derenda GmbH). Trace elements were trapped using 47 mm glass fiber filters and were recovered using microwave extraction; for their determination, the graphite furnace atomic absorption spectrometry (GFAAS) technique was utilized. The PAHs were trapped with 47 mm quartz fiber filters and were analyzed using dichloromethane extraction followed by gas chromatography-mass spectrometry. This region of Western Macedonia has historically been the center of electricity production in Greece. Lignite is mined in open-cast mines and used as feed in a number of thermal power plants. At its peak, which was in the 1990's, the areas produced close to 70% of electricity in Greece. Since then, electricity production (and related activities) are in decline as, due to Greece's EU commitments, the region has entered a transition, post-lignite process.

| S-EPMC9130502 | biostudies-literature

Domestic airborne black carbon and exhaled nitric oxide in children in NYC.

Project description:Differential exposure to combustion by-products and allergens may partially explain the marked disparity in asthma prevalence (3-18%) among New York City neighborhoods. Subclinical changes in airway inflammation can be measured by fractional exhaled nitric oxide (FeNO). FeNO could be used to test independent effects of these environmental exposures on airway inflammation. Seven- and eight-year-old children from neighborhoods with lower (range 3-9%, n=119) and higher (range 11-18%, n=121) asthma prevalence participated in an asthma case-control study. During home visits, FeNO was measured, and samples of bed dust (allergens) and air (black carbon; BC) were collected. Neighborhood built-environment characteristics were assessed for the 500 m surrounding participants' homes. Airborne BC concentrations in homes correlated with neighborhood asthma prevalence (P<0.001) and neighborhood densities of truck routes (P<0.001) and buildings burning residual oil (P<0.001). FeNO concentrations were higher among asthmatics with than in those without frequent wheeze (?4 times/year) (P=0.002). FeNO concentrations correlated with domestic BC among children without seroatopy (P=0.012) and with dust mite allergen among children with seroatopy (P=0.020). The association between airborne BC in homes and both neighborhood asthma prevalence and FeNO suggest that further public health interventions on truck emissions standards and residual oil use are warranted.

| S-EPMC3685864 | biostudies-literature

Black carbon and particulate matter (PM2.5) concentrations in New York City's subway stations.

Project description:The New York City (NYC) subway is the main mode of transport for over 5 million passengers on an average weekday. Therefore, airborne pollutants in the subway stations could have a significant impact on commuters and subway workers. This study looked at black carbon (BC) and particulate matter (PM2.5) concentrations in selected subway stations in Manhattan. BC and PM2.5 levels were measured in real time using a Micro-Aethalometer and a PDR-1500 DataRAM, respectively. Simultaneous samples were also collected on quartz filters for organic and elemental carbon (OC/EC) analysis and on Teflon filters for gravimetric and trace element analysis. In the underground subway stations, mean real time BC concentrations ranged from 5 to 23 ?g/m(3), with 1 min average peaks >100 ?g/m(3), while real time PM2.5 levels ranged from 35 to 200 ?g/m(3). Mean EC levels ranged from 9 to 12.5 ?g/m(3). At street level on the same days, the mean BC and PM2.5 concentrations were below 3 and 10 ?g/m(3), respectively. This study shows that both BC soot and PM levels in NYC's subways are considerably higher than ambient urban street levels and that further monitoring and investigation of BC and PM subway exposures are warranted.

| S-EPMC4270389 | biostudies-literature

Black carbon particles in human breast milk: assessing infant's exposure.

Project description:Background/aimHuman breast milk is the recommended source of nutrition for infants due to its complex composition and numerous benefits, including a decline in infection rates in childhood and a lower risk of obesity. Hence, it is crucial that environmental pollutants in human breast milk are minimized. Exposure to black carbon (BC) particles has adverse effects on health; therefore, this pilot study investigates the presence of these particles in human breast milk.MethodsBC particles from ambient exposure were measured in eight human breast milk samples using a white light generation under femtosecond illumination. The carbonaceous nature of the particles was confirmed with BC fingerprinting. Ambient air pollution exposures (PM2.5, PM10, and NO2) were estimated using a spatial interpolation model based on the maternal residential address. Spearman rank correlation coefficients were obtained to assess the association between human breast milk's BC load and ambient air pollution exposure.ResultsBC particles were found in all human breast milk samples. BC loads in human breast milk were strongly and positively correlated with recent (i.e., 1 week) maternal residential NO2 (r = 0.79; p = 0.02) exposure and medium-term (i.e., 1 month) PM2.5 (r = 0.83; p = 0.02) and PM10 (r = 0.93; p = 0.002) exposure.ConclusionFor the first time, we showed the presence of BC particles in human breast milk and found a robust association with ambient air pollution concentrations. Our findings present a pioneering insight into a novel pathway through which combustion-derived air pollution particles can permeate the delicate system of infants.

| S-EPMC10828029 | biostudies-literature

Ambient black carbon particles reach the fetal side of human placenta.

Project description:Particle transfer across the placenta has been suggested but to date, no direct evidence in real-life, human context exists. Here we report the presence of black carbon (BC) particles as part of combustion-derived particulate matter in human placentae using white-light generation under femtosecond pulsed illumination. BC is identified in all screened placentae, with an average (SD) particle count of 0.95 × 104 (0.66 × 104) and 2.09 × 104 (0.9 × 104) particles per mm3 for low and high exposed mothers, respectively. Furthermore, the placental BC load is positively associated with mothers' residential BC exposure during pregnancy (0.63-2.42 µg per m3). Our finding that BC particles accumulate on the fetal side of the placenta suggests that ambient particulates could be transported towards the fetus and represents a potential mechanism explaining the detrimental health effects of pollution from early life onwards.

| S-EPMC6748955 | biostudies-literature

Global Radiative Impacts of Black Carbon Acting as Ice Nucleating Particles.

Project description:Black carbon (BC) aerosols from incomplete combustion generally warm the climate, but the magnitudes of their various interactions with climate are still uncertain. A key knowledge gap is their role as ice nucleating particles (INPs), enabling ice formation in clouds. Here we assess the global radiative impacts of BC acting as INPs, using simulations with the Community Earth System Model 2 climate model updated to include new laboratory-based ice nucleation parameterizations. Overall, we find a moderate cooling through changes to stratiform cirrus clouds, counteracting the well-known net warming from BC's direct scattering and absorption of radiation. Our best estimates indicate that BC INPs generally thin cirrus by indirectly inhibiting the freezing of solution aerosol, with a global net radiative impact of -0.13 ± 0.07 W/m2. Sensitivity tests of BC amounts and ice nucleating efficiencies, and uncertainties in the environment where ice crystals form, show a potential range of impacts from -0.30 to +0.02 W/m2.

| S-EPMC7757207 | biostudies-literature

Impact of biomass induced black carbon particles in cascading COVID-19.

Project description:We explore the association of biomass-induced black carbon aerosolized virus with COVID-19 in one of the top-ranked polluted hot spot regions of the world, Delhi, at the time when other confounding factors were almost stable and the pandemic wave was on the declining stage. Delhi was worst affected by COVID-19. However, when it was fast returning back to normal after about 6 months with minimum fatalities, it suddenly encountered a reversal with a 10 fold increase in infection counts, coinciding with the onset of the stubble burning period in neighbouring states. We hereby report that the crop residue burning induced lethal aged Black carbon-rich particles which engulfs Delhi during the post-monsoon months of October-November are strongly associated with COVID-19 and largely responsible for the sudden surge. It is found that the virus efficacy is not necessarily related to any particulates but it is more of source-based toxicity of its component where the virus is piggybacking. We conclude that the aged biomass BC particles tend to aggregate and react with other compounds to grow in size, providing temporary habitat to viruses leading to the rapid increase in COVID-19 cases which declined after the crop burning stopped.

| S-EPMC8264527 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data