Browse
Submit Data
Databases
API
Help

Dataset Information

35 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

One-Step Hydrothermal Synthesis of Comb-Like ZnO Nanostructures.

ABSTRACT: Zinc Oxide (ZnO) nano-superstructures (NSSs) have attracted intense research interests due to their large surface areas and unique properties. In this work, we report an original approach to synthesize ZnO NSSs in a one-step manner with a hydrothermal method. The crystalline structures and growth mechanism can be understood by surface energy calculations. The reaction kinetics was investigated for the control of the morphology of ZnO NSSs. The critical role of the morphology of Au catalysts in the synthesis of ZnO nanostructures has been demonstrated. Such ZnO NSSs can be fabricated on various rigid and flexible substrates for applications in electronics, solar cells and piezoelectric devices.

SUBMITTER: Xu X

PROVIDER: S-EPMC3500587 | biostudies-literature | 2012 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

One-Step Hydrothermal Synthesis of Comb-Like ZnO Nanostructures.

Xu Xiaobin X Wu Min M Asoro Michael M Ferreira P J PJ Fan D L DL

Crystal growth & design 20120904 10

Zinc Oxide (ZnO) nano-superstructures (NSSs) have attracted intense research interests due to their large surface areas and unique properties. In this work, we report an original approach to synthesize ZnO NSSs in a one-step manner with a hydrothermal method. The crystalline structures and growth mechanism can be understood by surface energy calculations. The reaction kinetics was investigated for the control of the morphology of ZnO NSSs. The critical role of the morphology of Au catalysts in t ...[more]

PMID: 23173004

Similar Datasets

Synthesis and Morphological Control of VO2 Nanostructures via a One-Step Hydrothermal Method.

Project description:The morphology of nanostructures is a vital parameter to consider in components comprised of materials exhibiting specific functionalities. The number of process steps and the need for high temperatures can often be a limiting factor when targeting a specific morphology. Here, we demonstrate a repeatable synthesis of different morphologies of a highly crystalline monoclinic phase of vanadium dioxide (VO2(M)) using a one-step hydrothermal method. By adjusting the synthesis parameters, such as pH, temperature, and reducing agent concentration in the precursor, VO2 nanostructures with high uniformity and crystallinity are achieved. Some of these morphologies were obtained via the choice of the reducing agent that allowed us to skip the annealing step. Our results indicate that the morphologies of the nanostructures are very sensitive to the hydrazine hydrate (N2H4.H2O) concentration. Another reducing agent, dodecylamine, was used to achieve well-organized and high-quality VO2(M) nanotubes. Differential scanning calorimetry (DSC) experiments revealed that all samples display the monoclinic-to-tetragonal structural transition (MTST) regardless of the morphology, albeit at different temperatures that can be interpreted as the variations in overheating and undercooling limits. VO2(M) structures with a higher surface to volume ratio exhibit a higher overheating limit than those with low ratios.

| S-EPMC8002504 | biostudies-literature

One-step synthesis of ZnO nanosheets: a blue-white fluorophore.

Project description:Zinc oxide is synthesised at low temperature (80°C) in nanosheet geometry using a substrate-free, single-step, wet-chemical method and is found to act as a blue-white fluorophore. Investigation by atomic force microscopy, electron microscopy, and X-ray diffraction confirms zinc oxide material of nanosheet morphology where the individual nanosheets are polycrystalline in nature with the crystalline structure being of wurtzite character. Raman spectroscopy indicates the presence of various defects, while photoluminescence measurements show intense green (centre wavelength approximately 515 nm) blue (approximately 450 nm), and less dominant red (approximately 640 nm) emissions due to a variety of vacancy and interstitial defects, mostly associated with surfaces or grain boundaries. The resulting colour coordinate on the CIE-1931 standard is (0.23, 0.33), demonstrating potential for use as a blue-white fluorescent coating in conjunction with ultraviolet emitting LEDs. Although the defects are often treated as draw-backs of ZnO, here we demonstrate useful broadband visible fluorescence properties in as-prepared ZnO.

| S-EPMC3522028 | biostudies-literature

One-Step Green Hydrothermal Synthesis of Few-Layer Graphene Oxide from Humic Acid.

Project description:The conventional synthesis route of graphene oxide (GOG), based on Hummers method, suffers from explosion risk, environmental concerns and a tedious synthesis process, which increases production costs and hinders its practical applications. Herein, we report a novel strategy for preparing few-layer graphene oxide (GOH) from humic acid via simple hydrothermal treatment. The formation of GOH is mainly attributed to the hydrolysis, oxidation and aromatization of humic acid under hydrothermal conditions. The as-prepared few-layer GOH has typical morphology (thin and crumpled sheets with the thickness of ~3.2 nm), crystal structure (a Raman ID/IG ratio of 1.09) and chemical composition (an X-ray Photoelectron Spectroscopy (XPS) O/C atomic ratio of 0.36) of few-layer GOG. The thermally reduced GOH (r-GOH) delivers considerable area capacitance of 28 µF·cm-2, high rate capability and low electrochemical resistance as supercapacitor electrodes. The described hydrothermal process shows great promise for the cheap, green and efficient synthesis of few-layer graphene oxide for advanced applications.

| S-EPMC5923545 | biostudies-literature

One-Step Hydrothermal Synthesis, Thermochromic and Infrared Camouflage Properties of Vanadium Dioxide Nanorods.

Project description:Vanadium dioxide (VO2) has attracted interest from researchers because it undergoes a metal-insulator phase transition (MIT), which is accompanied by a reversible and remarkable change in both electrical and optical properties. VO2 exhibits numerous polymorphs and thus it is essential to control the growth of specific monoclinic VO2 (M) and rutile VO2 (R) phases. In this study, we developed a cost-effective and facile method for preparing VO2 nanorods with a highly crystalline monoclinic phase by one-step hydrothermal synthesis, in which only V2O5 and H2C2O4 are used as raw materials. The phase evolution of VO2 during the hydrothermal process was studied. The obtained VO2 nanorods were thoroughly mixed with fluorocarbon resin and homogeneous emulsifier in an ethanol solution to obtain a VO2 dispersion. To prepare VO2 films, screen printing was performed with a stainless steel screen mesh mask on glasses or fabric substrate. The VO2 coating had good thermochromic performance; the infrared transmittance change was greater than 20% @1.5 μm whilst keeping the visible transmittance greater than 50%. Meanwhile, the polyester base coating on the fabric had an emissivity change of up to 22%, which provides a solution for adaptive IR camouflage.

| S-EPMC9565468 | biostudies-literature

One-step hydrothermal synthesis of graphene decorated V2O5 nanobelts for enhanced electrochemical energy storage.

Project description:Graphene-decorated V2O5 nanobelts (GVNBs) were synthesized via a low-temperature hydrothermal method in a single step. V2O5 nanobelts (VNBs) were formed in the presence of graphene oxide, a mild oxidant, which also enhanced the conductivity of GVNBs. From the electron energy loss spectroscopy analysis, the reduced graphene oxide (rGO) are inserted into the layered crystal structure of V2O5 nanobelts, which further confirmed the enhanced conductivity of the nanobelts. The electrochemical energy-storage capacity of GVNBs was investigated for supercapacitor applications. The specific capacitance of GVNBs was evaluated using cyclic voltammetry (CV) and charge/discharge (CD) studies. The GVNBs having V2O5-rich composite, namely, V3G1 (VO/GO = 3:1), showed superior specific capacitance in comparison to the other composites (V1G1 and V1G3) and the pure materials. Moreover, the V3G1 composite showed excellent cyclic stability and the capacitance retention of about 82% was observed even after 5000 cycles.

| S-EPMC4311251 | biostudies-literature

Effects of pH on High-Performance ZnO Resistive Humidity Sensors Using One-Step Synthesis.

Project description:In this paper, we prepared a high-performance zinc oxide (ZnO) humidity sensor in an alkaline environment using one-step hydrothermal method. Experiments showed that the pH value of the precursor solution affects the performance of ZnO humidity sensors. There are abundant hydroxyl group and oxygen vacancies on the surface of ZnO with a precursor pH value of 10. Abundant hydroxyl groups on the surface of ZnO can adsorb a large number of water molecules and rich oxygen vacancies can accelerate the decomposition of water molecules, thus increasing the number of conductive ions (H3O+) and further improving the performance of the sensor. So, such a ZnO humidity sensor exhibited high sensitivity (14,415), good linearity, small hysteresis (0.9%), fast response/recovery time (31/15 s) in the range from 11% to 95% relative humidity (RH). Moreover, the ZnO-2 humidity sensor has good repeatability and can be effectively used for a long time. This study provides a new idea for the development of low-cost, high-performance and reusable ZnO resistive humidity sensors.

| S-EPMC6929030 | biostudies-literature

One-Step Hydrothermal Synthesis of Yellow and Green Emitting Silicon Quantum Dots with Synergistic Effect.

Project description:The concept of synergistic effects has been widely applied in many scientific fields such as in biomedical science and material chemistry, and has further attracted interest in the fields of both synthesis and application of nanomaterials. In this paper, we report the synthesis of long-wavelength emitting silicon quantum dots based on a one-step hydrothermal route with catechol (CC) and sodium citrate (Na-citrate) as a reducing agent pair, and N-[3-(trimethoxysilyl)propyl]ethylenediamine (DAMO) as silicon source. By controlling the reaction time, yellow-emitting silicon quantum dots and green-emitting silicon quantum dots were synthesized with quantum yields (QYs) of 29.4% and 38.3% respectively. The as-prepared silicon quantum dots were characterized by fluorescence (PL) spectrum, UV?visible spectrum, high resolution transmission electron microscope (HRTEM), Fourier transform infrared (FT-IR) spectrometry energy dispersive spectroscopy (EDS), and Zeta potential. With the aid of these methods, this paper further discussed how the optical performance and surface characteristics of the prepared quantum dots (QDs) influence the fluorescence mechanism. Meanwhile, the cell toxicity of the silicon quantum dots was tested by the 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium (MTT) bromide method, and its potential as a fluorescence ink explored. The silicon quantum dots exhibit a red-shift phenomenon in their fluorescence peak due to the participation of the carbonyl group during the synthesis. The high-efficiency and stable photoluminescence of the long-wavelength emitting silicon quantum dots prepared through a synergistic effect is of great value in their future application as novel optical materials in bioimaging, LED, and materials detection.

| S-EPMC6474109 | biostudies-literature

One-Pot Synthesis of Colloidal Hybrid Au (Ag)/ZnO Nanostructures with the Participation of Maleic Acid Copolymers.

Project description:One-pot synthesis of colloidal Au/ZnO and Ag/ZnO nanohybrid structures was carried out. The copolymers of maleic acid-poly(N-vinyl-2-pyrrolidone-alt-maleic acid), poly(ethylene-alt-maleic acid), or poly(styrene-alt-maleic acid) were used as templates for the sorption of cations of metals-precursors and stabilization of the resulting nanoheterostructures. Simultaneous production of two types of nanoparticles has been implemented under mild conditions in an aqueous alkaline medium and without additional reagents. Equimolar ratios of the metal cations and appropriate load on all copolymers were used: molar ratio of maleic acid monomeric units of copolymer/gold (silver)cations/zinc cations was 1/0.15/0.23 (1/0.3/0.15). The process of obtaining the heterostructures was studied using UV-Vis spectroscopy. The kinetics of the formation of heterostructures was influenced by the nature of the maleic acid copolymer and noble metal cations used. A high reaction rate was observed in the case of using zinc and gold cations-precursors and a copolymer of maleic acid with N-vinylpyrrolidone as a stabilizer of nanoparticles. The structure of the synthesized polymer-stabilized heterostructures was studied using instrumental methods of analysis-XPS, FTIR, PXRD, and TEM. Under the conditions used, stable colloidal solutions of heterodimers were obtained, and such structure can be converted to a solid state and back without loss of properties.

| S-EPMC10096674 | biostudies-literature

Facile One-Step Hydrothermal Synthesis of the rGO@Ni3V2O8 Interconnected Hollow Microspheres Composite for Lithium-Ion Batteries.

Project description:Low-cost, vanadium-based mixed metal oxides mostly have a layered crystal structure with excellent kinetics for lithium-ion batteries, providing high energy density. The existence of multiple oxidation states and the coordination chemistry of vanadium require cost-effective, robust techniques to synthesize the scaling up of their morphology and surface properties. Hydrothermal synthesis is one of the most suitable techniques to achieve pure phase and multiple morphologies under various conditions of temperature and pressure. We attained a simple one-step hydrothermal approach to synthesize the reduced graphene oxide coated Nickel Vanadate (rGO@Ni3V2O8) composite with interconnected hollow microspheres. The self-assembly route produced microspheres, which were interconnected under hydrothermal treatment. Cyclic performance determined the initial discharge/charge capacities of 1209.76/839.85 mAh g-1 at the current density of 200 mA g-1 with a columbic efficiency of 69.42%, which improved to 99.64% after 100 cycles. High electrochemical performance was observed due to high surface area, the porous nature of the interconnected hollow microspheres, and rGO induction. These properties increased the contact area between electrode and electrolyte, the active surface of the electrodes, and enhanced electrolyte penetration, which improved Li-ion diffusivity and electronic conductivity.

| S-EPMC7760731 | biostudies-literature

B- and N-doped carbon dots by one-step microwave hydrothermal synthesis: tracking yeast status and imaging mechanism.

Project description:BackgroundCarbon dots (CDs) are widely used in cell imaging due to their excellent optical properties, biocompatibility and low toxicity. At present, most of the research on CDs focuses on biomedical application, while there are few studies on the application of microbial imaging.ResultsIn this study, B- and N-doped carbon dots (BN-CDs) were prepared from citric acid, ethylenediamine, and boric acid by microwave hydrothermal method. Based on BN-CDs labeling yeast, the dead or living of yeast cell could be quickly identified, and their growth status could also be clearly observed. In order to further observe the morphology of yeast cell under different lethal methods, six methods were used to kill the cells and then used BN-CDs to label the cells for imaging. More remarkably, imaging of yeast cell with ultrasound and antibiotics was significantly different from other imaging due to the overflow of cell contents. In addition, the endocytosis mechanism of BN-CDs was investigated. The cellular uptake of BN-CDs is dose, time and partially energy-dependent along with the involvement of passive diffusion. The main mechanism of endocytosis is caveolae-mediated.ConclusionBN-CDs can be used for long-term stable imaging of yeast, and the study provides basic research for applying CDs to microbiol imaging.

| S-EPMC8715610 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data