Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Tailoring terahertz plasmons with silver nanorod arrays

ABSTRACT: Plasmonic materials that strongly interact with light are ideal candidates for designing subwavelength photonic devices. We report on direct coupling of terahertz waves in metallic nanorods by observing the resonant transmission of surface plasmon polariton waves through lithographically patterned films of silver nanorod (100?nm in diameter) micro-hole arrays. The best enhancement in surface plasmon resonant transmission is obtained when the nanorods are perfectly aligned with the electric field direction of the linearly polarized terahertz wave. This unique polarization-dependent propagation of surface plasmons in structures fabricated from nanorod films offers promising device applications. We conclude that the anisotropy of nanoscale metallic rod arrays imparts a material anisotropy relevant at the microscale that may be utilized for the fabrication of plasmonic and metamaterial based devices for operation at terahertz frequencies.

SUBMITTER: Cao W

PROVIDER: S-EPMC3642713 | biostudies-literature | 2013 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Resonant terahertz detection using graphene plasmons.

Project description:Plasmons, collective oscillations of electron systems, can efficiently couple light and electric current, and thus can be used to create sub-wavelength photodetectors, radiation mixers, and on-chip spectrometers. Despite considerable effort, it has proven challenging to implement plasmonic devices operating at terahertz frequencies. The material capable to meet this challenge is graphene as it supports long-lived electrically tunable plasmons. Here we demonstrate plasmon-assisted resonant detection of terahertz radiation by antenna-coupled graphene transistors that act as both plasmonic Fabry-Perot cavities and rectifying elements. By varying the plasmon velocity using gate voltage, we tune our detectors between multiple resonant modes and exploit this functionality to measure plasmon wavelength and lifetime in bilayer graphene as well as to probe collective modes in its moiré minibands. Our devices offer a convenient tool for further plasmonic research that is often exceedingly difficult under non-ambient conditions (e.g. cryogenic temperatures) and promise a viable route for various photonic applications.

| S-EPMC6300605 | biostudies-literature

Density-independent plasmons for terahertz-stable topological metamaterials.

Project description:To efficiently integrate cutting-edge terahertz technology into compact devices, the highly confined terahertz plasmons are attracting intensive attention. Compared to plasmons at visible frequencies in metals, terahertz plasmons, typically in lightly doped semiconductors or graphene, are sensitive to carrier density (n) and thus have an easy tunability, which leads to unstable or imprecise terahertz spectra. By deriving a simplified but universal form of plasmon frequencies, here, we reveal a unified mechanism for generating unusual n-independent plasmons (DIPs) in all topological states with different dimensions. Remarkably, we predict that terahertz DIPs can be excited in a two-dimensional nodal line and one-dimensional nodal point systems, confirmed by the first-principle calculations on almost all existing topological semimetals with diverse lattice symmetries. Besides n-independence, the feature of Fermi velocity and degeneracy factor dependencies in DIPs can be applied to design topological superlattice and multiwalled carbon nanotube metamaterials for broadband terahertz spectroscopy and quantized terahertz plasmons, respectively. Surprisingly, high spatial confinement and quality factor, also insensitive to n, can be simultaneously achieved in these terahertz DIPs. Our findings pave the way for developing topological plasmonic devices for stable terahertz applications.

| S-EPMC8126841 | biostudies-literature

Terahertz and mid-infrared plasmons in three-dimensional nanoporous graphene.

Project description:Two-dimensional (2D) graphene emerged as an outstanding material for plasmonic and photonic applications due to its charge-density tunability, high electron mobility, optical transparency and mechanical flexibility. Recently, novel fabrication processes have realised a three-dimensional (3D) nanoporous configuration of high-quality monolayer graphene which provides a third dimension to this material. In this work, we investigate the optical behaviour of nanoporous graphene by means of terahertz and infrared spectroscopy. We reveal the presence of intrinsic 2D Dirac plasmons in 3D nanoporous graphene disclosing strong plasmonic absorptions tunable from terahertz to mid-infrared via controllable doping level and porosity. In the far-field the spectral width of these absorptions is large enough to cover most of the mid-Infrared fingerprint region with a single plasmon excitation. The enhanced surface area of nanoporous structures combined with their broad band plasmon absorption could pave the way for novel and competitive nanoporous-graphene based plasmonic-sensors.

| S-EPMC5378955 | biostudies-literature

NiF2 Nanorod Arrays for Supercapattery Applications.

Project description:A electrode for energy storage cells is possible directly on Ni foam, using a simple reduction process to form NiF2 nanorod arrays (NA). We demonstrate NiF2@Ni NA for a symmetric electrochemical supercapattery electrode. With an areal specific capacitance of 51 F cm-2 at 0.25 mA cm-2 current density and 94% cycling stability, a NiF2@Ni electrode can exhibit supercapattery behavior, a combination of supercapacitor and battery-like redox. The symmetric electrochemical supercapattery delivers 31 W h m-2 energy density and 797 W m-2 power density with 83% retention in a 1 M KOH electrolyte, constituting a step toward manufacturing a laboratory-scale energy storage device based on metal halides. Producing self-grown hierarchically porous nanostructured electrodes on three-dimensional metal foams by displacement reactions may be useful for other metal halides as electrodes for supercapacitors, supercapatteries, and lithium-ion batteries.

| S-EPMC7203691 | biostudies-literature

Anisotropic Optical Response of Silver Nanorod Arrays: Surface Enhanced Raman Scattering Polarization and Angular Dependences Confronted with Ellipsometric Parameters.

Project description:Silver nanorod arrays prepared by oblique angle deposition (AgOADs) represent versatile, simple and inexpensive substrates for high sensitivity surface enhanced Raman scattering (SERS) applications. Their anisotropic nature suggests that their optical responses such as the SERS signal, the depolarization ratio, reflectivity and ellipsometric parameters critically depend on the states of polarization, nanorod angular arrangement and specific illumination-observation geometry. SERS polarization and angular dependences of AgOADs were measured using methylene blue (MB) molecule. Our study constitutes, to our knowledge, the most detailed investigation of such characteristics of plasmonic nanostructures to date. This is due to the 90°-scattering geometry used in which two out of three Euler angles determining the nanorod spatial orientation and four polarization combinations can be varied simultaneously. We attributed the anisotropic optical response to anisotropic (pseudo)refractive index caused by different periodicity of our structures in different directions since the plasmonic properties were found rather isotropic. For the first time we demonstrate very good correspondence between SERS intensities and ellipsometric parameters for all measured configurations as compared on the basis of the surface selection rules. Obtained results enable quantitative analysis of MB Raman tensor elements, indicating that the molecules adsorb predominantly with the symmetry axis perpendicular to the surface.

| S-EPMC5487367 | biostudies-literature

Excite Spoof Surface Plasmons with Tailored Wavefronts Using High-Efficiency Terahertz Metasurfaces.

Project description:Spoof surface plasmons (SSPs) play crucial roles in terahertz (THz) near-field photonics. However, both high-efficiency excitation and wavefront engineering of SSPs remain great challenges, which hinder their wide applications in practice. Here, a scheme is proposed to simultaneously achieve these two goals efficiently using a single ultracompact device. First, it is shown that a gradient meta-coupler constructed by high-efficiency Pancharatnam-Berry (PB) meta-atoms can convert circularly polarized (CP) THz beams into SSPs with absolute efficiency up to 60%. Encoding a parabolic phase profile into the meta-coupler based on the PB mechanism, it is demonstrated that the device can covert CP beams into SSPs with focusing or defocusing wavefronts, dictated by the chirality of the incident wave. Finally, two distinct chirality-dependent phase distributions are encoded into the meta-coupler design by combining the PB and resonance phase mechanisms, and it is demonstrated that the resulting meta-device can achieve SSP excitations with chirality-delinked bifunctional wavefront engineering. THz near-field experiments are performed to characterize all three devices, in excellent agreement with full-wave simulations. The results pave the road to realize ultracompact devices integrating different functionalities on near-field manipulations, which can find many applications (e.g., optical sensing, imaging, on-chip photonics, etc.) in different frequency domains.

| S-EPMC7539192 | biostudies-literature

Highly tunable propagating surface plasmons on supported silver nanowires.

Project description:Surface plasmons, the quanta of the collective oscillations of free electrons at metal surface, can be easily tuned by changing the surrounding dielectric materials, which is well known for metal nanoparticles and metal surfaces, but less is known for one-dimensional metal nanowires. Here, we find an extremely large tunability of surface plasmons on Ag nanowires with a beat period of the near-field distribution pattern increasing by 90 nm per nanometer of Al2O3 coating, or by 16 µm per refractive index unit change in the surrounding medium. Such high sensitivity is crucial to directly control the optical signal distribution for various routing and demultiplexing functions in plasmonic circuits and may pave the way to the development of on-chip ultrasensitive biosensing.

| S-EPMC3606990 | biostudies-literature

Terahertz magneto-plasmonics using cobalt subwavelength aperture arrays.

Project description:We characterize the terahertz (THz) magneto-plasmonic response of a cobalt-based periodic aperture array. The bare cobalt surface allows for low loss propagation of surface plasmon-polaritons, as evidenced by comparing the reflection from aperture arrays coated with Au and with Co. When an external magnetic field is applied in a polar Kerr geometry, we observe a maximum polarization rotation of ~0.6° and an ellipticity of ~0.35° from the Co-based array. These values are larger than expected based on existing models that include only interband transitions in ferromagnetic metals. We discuss possible reasons for the difference between experiment and theory.

| S-EPMC5607252 | biostudies-literature

Plasmonic nanorod arrays for enhancement of single-molecule detection.

Project description:We fabricated silver nanorod arrays producing enhanced fluorescence and evaluated the photophysical behaviors of single probes immobilized on nanorods. The observation of bright emission indicated that a highly enhanced field was created near the nanorod. A considerable enhancement in fluorescence of up to a factor of two orders of magnitude was observed as compared to the emission on the controlled substrate.

| S-EPMC4072312 | biostudies-literature

Uniform gold nanorod arrays from polyethylenimine-coated alumina templates.

Project description:Monolithic Au nanorod arrays can be grown by electrodeposition in Au-backed nanoporous alumina templates using polyethylenimine (PEI) as an adhesion layer, with excellent height control between 300 nm and 1.4 microm. The local height distribution can be extremely narrow with relative standard deviations well below 2%. The uniform growth rate appears to be determined by the adsorbed PEI matrix, which controls the growth kinetics of the grains comprising the nanorods. The nanorods can be retained as free-standing 2D arrays after careful removal of the AAO template. Reflectance spectroscopy reveals a collective plasmon mode with a maximum near 1.2 microm, in accord with recent calculations for 2D arrays of closely spaced cylindrical nanoparticles.

| S-EPMC2531144 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data