Browse
Submit Data
Databases
API
Help

Dataset Information

34 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Polyethyleneimine incorporated metal-organic frameworks adsorbent for highly selective CO2 capture.

ABSTRACT: A series of polyethyleneimine (PEI) incorporated MIL-101 adsorbents with different PEI loadings were reported for the first time in the present work. Although the surface area and pore volume of MIL-101 decreased significantly after loading PEI, all the resulting composites exhibited dramatically enhanced CO2 adsorption capacity at low pressures. At 100 wt% PEI loading, the CO2 adsorption capacity at 0.15 bar reached a very competitive value of 4.2?mmol g(-1) at 25°C, and 3.4?mmol g(-1) at 50°C. More importantly, the resulting adsorbents displayed rapid adsorption kinetics and ultrahigh selectivity for CO2 over N2 in the designed flue gas with 0.15?bar CO2 and 0.75?bar N2. The CO2 over N2 selectivity was up to 770 at 25°C, and 1200 at 50°C. We believe that the PEI based metal-organic frameworks is an attractive adsorbent for CO2 capture.

SUBMITTER: Lin Y

PROVIDER: S-EPMC3656390 | biostudies-literature | 2013

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Polyethyleneimine incorporated metal-organic frameworks adsorbent for highly selective CO2 capture.

Lin Yichao Y Yan Qiuju Q Kong Chunlong C Chen Liang L

Scientific reports 20130101

A series of polyethyleneimine (PEI) incorporated MIL-101 adsorbents with different PEI loadings were reported for the first time in the present work. Although the surface area and pore volume of MIL-101 decreased significantly after loading PEI, all the resulting composites exhibited dramatically enhanced CO2 adsorption capacity at low pressures. At 100 wt% PEI loading, the CO2 adsorption capacity at 0.15 bar reached a very competitive value of 4.2 mmol g(-1) at 25°C, and 3.4 mmol g(-1) at 50°C. ...[more]

PMID: 23681218

Similar Datasets

Strong Foam-like Composites from Highly Mesoporous Wood and Metal-Organic Frameworks for Efficient CO2 Capture.

Project description:Mechanical stability and multicycle durability are essential for emerging solid sorbents to maintain an efficient CO2 adsorption capacity and reduce cost. In this work, a strong foam-like composite is developed as a CO2 sorbent by the in situ growth of thermally stable and microporous metal-organic frameworks (MOFs) in a mesoporous cellulose template derived from balsa wood, which is delignified by using sodium chlorite and further functionalized by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation. The surface carboxyl groups in the TEMPO-oxidized wood template (TO-wood) facilitate the coordination of the cellulose network with multivalent metal ions and thus enable the nucleation and in situ growth of MOFs including copper benzene-1,3,5-tricarboxylate [Cu3(BTC)2], zinc 2-methylimidazolate, and aluminum benzene-1,3,5-tricarboxylate. The TO-wood/Cu3(BTC)2 composite shows a high specific surface area of 471 m2 g-1 and a high CO2 adsorption capacity of 1.46 mmol g-1 at 25 °C and atmospheric pressure. It also demonstrates high durability during the temperature swing cyclic CO2 adsorption/desorption test. In addition, the TO-wood/Cu3(BTC)2 composite is lightweight but exceptionally strong with a specific elastic modulus of 3034 kN m kg-1 and a specific yield strength of 68 kN m kg-1 under the compression test. The strong and durable TO-wood/MOF composites can potentially be used as a solid sorbent for CO2 capture, and their application can possibly be extended to environmental remediation, gas separation and purification, insulation, and catalysis.

| S-EPMC8289243 | biostudies-literature

Metal-organic framework based mixed matrix membranes: a solution for highly efficient CO2 capture?

Project description:The field of metal-organic framework based mixed matrix membranes (M(4)s) is critically reviewed, with special emphasis on their application in CO2 capture during energy generation. After introducing the most relevant parameters affecting membrane performance, we define targets in terms of selectivity and productivity based on existing literature on process design for pre- and post-combustion CO2 capture. Subsequently, the state of the art in M(4)s is reviewed against these targets. Because final application of these membranes will only be possible if thin separation layers can be produced, the latest advances in the manufacture of M(4) hollow fibers are discussed. Finally, the recent efforts in understanding the separation performance of these complex composite materials and future research directions are outlined.

| S-EPMC4445399 | biostudies-literature

Cu(I/II) Metal-Organic Frameworks Incorporated Nanofiltration Membranes for Organic Solvent Separation.

Project description:Copper-based metal-organic frameworks (MOFs) with different oxidation states and near-uniform particle sizes have been successfully synthesized. Mixed-matrix polyimide membranes incorporating 0.1-7 wt% of Cu(II) benzene-1,2,5-tricarboxylic acid (Cu(II)BTC), Cu(I/II)BTC and Cu(I) 1,2-ethanedisulfonic acid (EDS) (Cu(I)EDS) MOFs were fabricated via non-solvent-induced phase inversion process. These membranes are found to be solvent resistant and mechanically stable. Liquid phase nanofiltration experiments were performed to separate toluene from n-heptane at room temperature. These membranes demonstrate preferential adsorption and permeation of the aromatic toluene over aliphatic n-heptane. The amount of MOF particles incorporated, the oxidation state of the Cu ion and membrane, and barrier layer thickness have a significant impact on the separation factor. Toluene/heptane separation factor at 1.47, 1.67 and 1.79 can be obtained for membranes incorporating 7 wt% Cu(II)BTC, Cu(I/II)BTC and Cu(I)EDS respectively at room temperature.

| S-EPMC7692870 | biostudies-literature

Holey graphene frameworks for highly selective post-combustion carbon capture.

Project description:Atmospheric CO2 concentrations continue to rise rapidly in response to increased combustion of fossil fuels, contributing to global climate change. In order to mitigate the effects of global warming, development of new materials for cost-effective and energy-efficient CO2 capture is critically important. Graphene-based porous materials are an emerging class of solid adsorbents for selectively removing CO2 from flue gases. Herein, we report a simple and scalable approach to produce three-dimensional holey graphene frameworks with tunable porosity and pore geometry, and demonstrate their application as high-performance CO2 adsorbents. These holey graphene macrostructures exhibit a significantly improved specific surface area and pore volume compared to their pristine counterparts, and can be effectively used in post-combustion CO2 adsorption systems because of their intrinsic hydrophobicity together with good gravimetric storage capacities, rapid removal capabilities, superior cycling stabilities, and moderate initial isosteric heats. In addition, an exceptionally high CO2 over N2 selectivity can be achieved under conditions relevant to capture from the dry exhaust gas stream of a coal burning power plant, suggesting the possibility of recovering highly pure CO2 for long-term sequestration and/or utilization for downstream applications.

| S-EPMC4754909 | biostudies-other

CO2-Selective Nanoporous Metal-Organic Framework Microcantilevers.

Project description:Nanoporous anodic aluminum oxide (AAO) microcantilevers are fabricated and MIL-53 (Al) metal-organic framework (MOF) layers are directly synthesized on each cantilever surface by using the aluminum oxide as the metal ion source. Exposure of the MIL53-AAO cantilevers to various concentrations of CO2, N2, CO, and Ar induces changes in their deflections and resonance frequencies. The results of the resonance frequency measurements for the different adsorbed gas molecules are almost identical when the frequency changes are normalized by the molecular weights of the gases. In contrast, the deflection measurements show that only CO2 adsorption induces substantial bending of the MIL53-AAO cantilevers. This selective deflection of the cantilevers is attributed to the strong interactions between CO2 and the hydroxyl groups in MIL-53, which induce structural changes in the MIL-53 layers. Simultaneous measurements of the resonance frequency and the deflection are performed to show that the diffusion of CO2 into the nanoporous MIL-53 layers occurs very rapidly, whereas the binding of CO2 to hydroxyl groups occurs relatively slowly, which indicates that the adsorption of CO2 onto the MIL-53 layers and the desorption of CO2 from the MIL-53 layers are reaction limited.

| S-EPMC4451844 | biostudies-other

Polyethyleneimine-Modified UiO-66-NH<sub>2</sub>(Zr) Metal-Organic Frameworks: Preparation and Enhanced CO<sub>2</sub> Selective Adsorption.

Project description:UiO-66-NH2, a zirconium-based functional metal-organic framework (MOF), was postsynthetically modified via Schiff base reaction between aldehyde groups in glutaraldehyde and amino groups in UiO-66-NH2 and CO2-preabsorbed polyethyleneimine (PEI). The resulting PEI-modified MOFs, abbreviated as PEIC@UiO, were characterized with 1H NMR, Fourier transform infrared, powder X-ray diffraction, Brunauer-Emmett-Teller, scanning electron microscopy, and thermogravimetric analysis and evaluated as CO2 adsorbents. In comparison with pristine UiO-66-NH2, the PEIC@UiO adsorbents have reduced specific surface area (7-150 m2/g) but maintained the same crystal structure. Particularly, the PEIC96@UiO adsorbent exhibited significantly improved CO2/N2 adsorption selectivity (48 vs 25) and higher CO2 adsorption capacity (3.2 vs 2.7 mmol/g). The adsorbent also displayed moderate desorption energy (68 kJ/mol CO2), superior moisture endurance, and recyclability, which are very desirable for practical applications.

| S-EPMC6648867 | biostudies-literature

Correction: CO2 induced phase transitions in diamine-appended metal-organic frameworks.

Project description:[This corrects the article DOI: 10.1039/C5SC01828E.].

| S-EPMC6979493 | biostudies-literature

A Selenophene-Incorporated Metal-Organic Framework for Enhanced CO2 Uptake and Adsorption Selectivity.

Project description:A new metal-organic coordination polymer [Zn2(sedc)2(dabco)] (1se; sedc2- = selepophene-2,5-dicarboxylate; dabco = 1,4-diazabicyclo[2.2.2]octane) was synthesized and characterized by single-crystal X-ray diffraction analysis. This MOF is based on {Zn2(OOCR)4N2} paddle wheels and is isoreticular to the family of [Zn2(bdc)2(dabco)] derivatives (1b; bdc2- = 1,4-benzenedicarboxylate) with pcu topology. The gas adsorption measurements revealed that 1se shows a 15% higher CO2 volumetric uptake at 273 K and 28% higher CO2 uptake at 298 K (both at 1 bar) compared to the prototypic framework 1b. Methane and nitrogen adsorption at 273 K was also investigated, and IAST calculations demonstrated a pronounced increase in CO2/CH4 and CO2/N2 selectivity for 1se, compared with 1b. For example, the selectivity factor for the equimolar CO2/CH4 gas mixture at 1 bar = 15.1 for 1se and 11.9 for 1b. The obtained results show a remarkable effect of the presence of selenium atom on the carbon dioxide affinity in the isoreticular metal-organic frameworks with very similar geometry and porosity.

| S-EPMC7582736 | biostudies-literature

Mixed-Metal Cu-BTC Metal-Organic Frameworks as a Strong Adsorbent for Molecular Hydrogen at Low Temperatures.

Project description:The advancement of hydrogen and fuel cell technologies hinges on the development of hydrogen storage methods. Metal-organic frameworks (MOFs) are one of the most favorable materials for hydrogen storage. In this study, we synthesized a series of isostructural mixed-metal metal-organic frameworks (MM-MOFs) of 1,3,5-benzenetricarboxylate (BTC), M-Cu-BTC, where M = Zn2+, Ni2+, Co2+, and Fe2+ using the post-synthetic exchange (PSE) method with metal ions. The powder X-ray diffraction patterns of MM-MOFs were similar with those of single-metal Cu-BTC. Scanning electron microscopy indicates the absence of amorphous phases. Inductively coupled plasma mass spectroscopy of the MM-MOFs shows successful metal exchanges using the PSE method. The N2 adsorption measurements confirmed the successful synthesis of porous MM-MOFs. The metal exchanged materials Ni-Cu-BTC, Zn-Cu-BTC, Fe-Cu-BTC, and Co-Cu-BTC were studied for hydrogen storage and showed a gravimetric uptake of 1.6, 1.63, 1.63, and 1.12 wt %; respectively. The increase in hydrogen adsorption capacity for the three metal exchanged materials is about 60% relative to that of the parent MOF (Cu-BTC). The improvement of gravimetric uptake in M-Cu-BTC (where M = Ni2+, Zn2+, and Fe2+) is probably due to the increase in binding enthalpy of H2 with the unsaturated metal sites after the partial exchange from Cu2+ to other metal ions. The higher charge density of metal ions strongly polarizes hydrogen and provides the primary binding sites inside the pores of Cu-BTC and subsequently enhances the gravimetric uptake of hydrogen.

| S-EPMC7658931 | biostudies-literature

Amido-Functionalized Magnetic Metal-Organic Frameworks Adsorbent for the Removal of Bisphenol A and Tetracycline.

Project description:In this paper, amido-functionalized MOFs with core/shell magnetic particles (Fe3O4@MIL-53(Al)-NH2) was prepared by the solvothermal method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), Vibrating Sample Magnetometer (VSM) and UV/VIS spectrophotometer. The influence of different factors on the adsorption effect of the pollutant, including adsorbent amounts, adsorption time, ionic strength and pH, were explored. It was found that the amine-decorated Fe3O4@MIL-53(Al)-NH2 were efficient for removal of contaminant, with the adsorption capacity for bisphenol A (234.1 mg/g) and tetracycline (84.8 mg/g) under the optimized conditions. The adsorption kinetics and the equilibrium adsorption data indicated that the adsorption process of BPA and TC was more compatible with the pseudo-second-order kinetic model and the Langmuir model, respectively. The thermodynamic values show the adsorption of the mentioned contaminant was spontaneous and endothermic. Moreover, the Fe3O4@MIL-53(Al)-NH2 adsorbent had good regeneration and reusability capacity after five cyclic utilization. All these results show Fe3O4@MIL-53(Al)-NH2 adsorbent could be a potential candidate for future water purification.

| S-EPMC8377470 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data