Dataset Information

DNA-polyfluorophore Chemosensors for Environmental Remediation: Vapor-phase Identification of Petroleum Products in Contaminated Soil.

ABSTRACT: Contamination of soil and groundwater by petroleum-based products is an extremely widespread and important environmental problem. Here we have tested a simple optical approach for detecting and identifying such industrial contaminants in soil samples, using a set of fluorescent DNA-based chemosensors in pattern-based sensing. We used a set of diverse industrial volatile chemicals to screen and identify a set of five short oligomeric DNA fluorophores on PEG-polystyrene microbeads that could differentiate the entire set after exposure to their vapors in air. We then tested this set of five fluorescent chemosensor compounds for their ability to respond with fluorescence changes when exposed to headgas over soil samples contaminated with one of ten different samples of crude oil, petroleum distillates, fuels, lubricants and additives. Statistical analysis of the quantitative fluorescence change data (as ?(R,G,B) emission intensities) revealed that these five chemosensors on beads could differentiate all ten product mixtures at 1000 ppm in soil within 30 minutes. Tests of sensitivity with three of the contaminant mixtures showed that they could be detected and differentiated in amounts at least as low as one part per million in soil. The results establish that DNA-polyfluorophores may have practical utility in monitoring the extent and identity of environmental spills and leaks, while they occur and during their remediation.

SUBMITTER: Jiang W

PROVIDER: S-EPMC3713804 | biostudies-literature | 2013 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

DNA-polyfluorophore Chemosensors for Environmental Remediation: Vapor-phase Identification of Petroleum Products in Contaminated Soil.

Jiang Wei W Wang Shenliang S Yuen Lik Hang LH Kwon Hyukin H Ono Toshikazu T Kool Eric T ET

Chemical science 20130801 8

Contamination of soil and groundwater by petroleum-based products is an extremely widespread and important environmental problem. Here we have tested a simple optical approach for detecting and identifying such industrial contaminants in soil samples, using a set of fluorescent DNA-based chemosensors in pattern-based sensing. We used a set of diverse industrial volatile chemicals to screen and identify a set of five short oligomeric DNA fluorophores on PEG-polystyrene microbeads that could diffe ...[more]

PMID: 23878719

Similar Datasets

Project description:Soil health deteriorates through the contamination and remediation processes, resulting in the limitation of the reuse and recycling of the remediated soils. Therefore, soil health should be recovered for the intended purposes of reuse and recycling. This study aimed to evaluate the applicability and effectiveness of several amendments to revitalize total petroleum hydrocarbon contaminated soils remediated by the landfarming process. Ten inorganic, organic, and biological amendments were investigated for their dosage and duration, and nine physicochemical, four fertility, and seven microbial (soil enzyme activity) factors were compared before and after the treatment of amendments. Finally, the extent of recovery was quantitatively estimated, and the significance of results was confirmed with statistical methods, such as simple regression and correlation analyses assisted by principal component analysis. The landfarming process is considered a somewhat environmentally friendly remediation technology to minimize the adverse effect on soil quality, but four soil properties-such as water holding capacity (WHC), exchangeable potassium (Ex. K), nitrate-nitrogen (NO3-N), available phosphorus (Av. P), and urease-were confirmed to deteriorate through the landfarming process. The WHC was better improved by organic agents, such as peat moss, biochar, and compost. Zeolite was evaluated as the most effective material for improving Ex. K content. The vermicompost showed the highest efficacy in recovering the NO3-N content of the remediated soil. Chlorella, vermicompost, and compost were investigated for their ability to enhance urease activity effectively. Although each additive showed different effectiveness according to different soil properties, their effect on overall soil properties should be considered for cost-effectiveness and practical implementation. Their overall effect was evaluated using statistical methods, and the results showed that compost, chlorella, and vermicompost were the most relevant amendments for rehabilitating the overall health of the remediated soil for the reuse and/or recycling of agricultural purposes. This study highlighted how to practically improve the health of remediated soils for the reuse and recycling of agricultural purposes.

Dataset Information

DNA-polyfluorophore Chemosensors for Environmental Remediation: Vapor-phase Identification of Petroleum Products in Contaminated Soil.

Publications

DNA-polyfluorophore Chemosensors for Environmental Remediation: Vapor-phase Identification of Petroleum Products in Contaminated Soil.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets