High throughput sequencing approaches to mutation discovery in the mouse.
Ontology highlight
ABSTRACT:
SUBMITTER: Simon MM
PROVIDER: S-EPMC3724459 | biostudies-literature | 2012 Oct
REPOSITORIES: biostudies-literature
Publications
High throughput sequencing approaches to mutation discovery in the mouse.
Simon Michelle M MM Mallon Ann-Marie AM Howell Gareth R GR Reinholdt Laura G LG
Mammalian genome : official journal of the International Mammalian Genome Society 20120919 9-10
Phenotype-driven approaches in mice are powerful strategies for the discovery of genes and gene functions and for unravelling complex biological mechanisms. Traditional methods for mutation discovery are reliable and robust, but they can also be laborious and time consuming. Recently, high-throughput sequencing (HTS) technologies have revolutionised the process of forward genetics in mice by paving the way to rapid mutation discovery. However, successful application of HTS for mutation discovery ...[more]
Similar Datasets
Project description:BackgroundWith the advance of new massively parallel genotyping technologies, quantitative trait loci (QTL) fine mapping and map-based cloning become more achievable in identifying genes for important and complex traits. Development of high-density genetic markers in the QTL regions of specific mapping populations is essential for fine-mapping and map-based cloning of economically important genes. Single nucleotide polymorphisms (SNPs) are the most abundant form of genetic variation existing between any diverse genotypes that are usually used for QTL mapping studies. The massively parallel sequencing technologies (Roche GS/454, Illumina GA/Solexa, and ABI/SOLiD), have been widely applied to identify genome-wide sequence variations. However, it is still remains unclear whether sequence data at a low sequencing depth are enough to detect the variations existing in any QTL regions of interest in a crop genome, and how to prepare sequencing samples for a complex genome such as soybean. Therefore, with the aims of identifying SNP markers in a cost effective way for fine-mapping several QTL regions, and testing the validation rate of the putative SNPs predicted with Solexa short sequence reads at a low sequencing depth, we evaluated a pooled DNA fragment reduced representation library and SNP detection methods applied to short read sequences generated by Solexa high-throughput sequencing technology.ResultsA total of 39,022 putative SNPs were identified by the Illumina/Solexa sequencing system using a reduced representation DNA library of two parental lines of a mapping population. The validation rates of these putative SNPs predicted with low and high stringency were 72% and 85%, respectively. One hundred sixty four SNP markers resulted from the validation of putative SNPs and have been selectively chosen to target a known QTL, thereby increasing the marker density of the targeted region to one marker per 42 K bp.ConclusionsWe have demonstrated how to quickly identify large numbers of SNPs for fine mapping of QTL regions by applying massively parallel sequencing combined with genome complexity reduction techniques. This SNP discovery approach is more efficient for targeting multiple QTL regions in a same genetic population, which can be applied to other crops.
| S-EPMC3091665 | biostudies-literature
Project description:Forward genetic approaches have limited use for agronomic traits that can't be reliably scored on a single plant basis. Thus, mutants in wheat and other crops are more useful for gene function studies by reverse genetic approach. With a long-term goal to develop a sequence-based mutation detection resource in hexaploid wheat, we conducted a feasibility study to accurately differentiate induced mutations from the homoeologs' sequence variations present among the three wheat genomes.A reduced representation ApeKI library consisting of 21 Ethylmethane Sulfonate (EMS) induced mutants and two wild type cv. Indian plants was developed using individual barcode adapters and sequenced. A novel bioinformatics pipeline was developed to identify sequence variants using 178,464 wheat unigenes as a reference wheat transcriptome. In total, 14,130 mutational changes [Single Nucleotide Polymorphisms (SNPs) and Insertions/Deletions (INDELs)] and 150,511 homoeologous sequence changes were detected. On an average, 662 SNPs (ranging from 46 to 1,330) and 10 small INDELs (ranging from 0 to 23) were identified for each of the mutants. A mutation frequency of one per 5 Kb was observed with 70 % being transitions and 30 % transversions. The pipeline was tested using the known sequence changes in the three wheat genes. Genes present in the distal regions of the chromosomes were found to be more prone to EMS compared to genes present in the proximal regions. Redefined parameters identified a total of 28,348 mutational changes (1,349/plant).We conclude that sequencing based mutation detection is a valuable method to identify induced mutations at large.
| S-EPMC4650848 | biostudies-literature
Project description:BackgroundEight diverse sorghum (Sorghum bicolor L. Moench) accessions were subjected to short-read genome sequencing to characterize the distribution of single-nucleotide polymorphisms (SNPs). Two strategies were used for DNA library preparation. Missing SNP genotype data were imputed by local haplotype comparison. The effect of library type and genomic diversity on SNP discovery and imputation are evaluated.ResultsAlignment of eight genome equivalents (6 Gb) to the public reference genome revealed 283,000 SNPs at ≥82% confirmation probability. Sequencing from libraries constructed to limit sequencing to start at defined restriction sites led to genotyping 10-fold more SNPs in all 8 accessions, and correctly imputing 11% more missing data, than from semirandom libraries. The SNP yield advantage of the reduced-representation method was less than expected, since up to one fifth of reads started at noncanonical restriction sites and up to one third of restriction sites predicted in silico to yield unique alignments were not sampled at near-saturation. For imputation accuracy, the availability of a genomically similar accession in the germplasm panel was more important than panel size or sequencing coverage.ConclusionsA sequence quantity of 3 million 50-base reads per accession using a BsrFI library would conservatively provide satisfactory genotyping of 96,000 sorghum SNPs. For most reliable SNP-genotype imputation in shallowly sequenced genomes, germplasm panels should consist of pairs or groups of genomically similar entries. These results may help in designing strategies for economical genotyping-by-sequencing of large numbers of plant accessions.
| S-EPMC3146956 | biostudies-literature
Project description:miRNAs are small, non-coding RNA that negatively regulate gene expression at post-transcriptional level, which play crucial roles in various physiological and pathological processes, such as development and tumorigenesis. Although deep sequencing technologies have been applied to investigate various small RNA transcriptomes, their computational methods are far away from maturation as compared to microarray-based approaches. In this study, a comprehensive web server mirTools was developed to allow researchers to comprehensively characterize small RNA transcriptome. With the aid of mirTools, users can: (i) filter low-quality reads and 3/5' adapters from raw sequenced data; (ii) align large-scale short reads to the reference genome and explore their length distribution; (iii) classify small RNA candidates into known categories, such as known miRNAs, non-coding RNA, genomic repeats and coding sequences; (iv) provide detailed annotation information for known miRNAs, such as miRNA/miRNA*, absolute/relative reads count and the most abundant tag; (v) predict novel miRNAs that have not been characterized before; and (vi) identify differentially expressed miRNAs between samples based on two different counting strategies: total read tag counts and the most abundant tag counts. We believe that the integration of multiple computational approaches in mirTools will greatly facilitate current microRNA researches in multiple ways. mirTools can be accessed at http://centre.bioinformatics.zj.cn/mirtools/ and http://59.79.168.90/mirtools.
| S-EPMC2896132 | biostudies-literature
Project description:Transgenesis by random integration of a transgene into the genome of a zygote has become a reliable and powerful method for the creation of new mouse strains that express exogenous genes, including human disease genes, tissue specific reporter genes or genes that allow for tissue specific recombination. Nearly 6,500 transgenic alleles have been created by random integration in embryos over the last 30 years, but for the vast majority of these strains, the transgene insertion sites remain uncharacterized.To obtain a complete understanding of how insertion sites might contribute to phenotypic outcomes, to more cost effectively manage transgenic strains, and to fully understand mechanisms of instability in transgene expression, we've developed methodology and a scoring scheme for transgene insertion site discovery using high throughput sequencing data.Similar to other molecular approaches to transgene insertion site discovery, high-throughput sequencing of standard paired-end libraries is hindered by low signal to noise ratios. This problem is exacerbated when the transgene consists of sequences that are also present in the host genome. We've found that high throughput sequencing data from mate-pair libraries are more informative when compared to data from standard paired end libraries. We also show examples of the genomic regions that harbor transgenes, which have in common a preponderance of repetitive sequences.
| S-EPMC4035081 | biostudies-other
Project description:We investigated two siblings, born to consanguineous parents, with neurological features reminiscent of adaptor protein complex 4 (AP4) deficiency, an autosomal recessive neurodevelopmental disorder characterized by neonatal hypotonia that progresses to hypertonia and spasticity, severe intellectual disability speech delay, microcephaly, and growth retardation. Yet, both children also presented with early onset obesity. Whole-exome sequencing identified two homozygous substitutions in two genes 170 kb apart on 7q22.1: a c.1137+1G>T splice mutation in AP4M1 previously described in a familial case of AP4-deficiency syndrome and the AZGP1 c.595A>T missense variant. Haplotyping analysis indicated a founder effect of the AP4M1 mutation, whereas the AZGP1 mutation arose more recently in our family. AZGP1 encodes an adipokine that stimulate lipolysis in adipocytes and regulates body weight in mice. We propose that the siblings' phenotype results from the combined effects of mutations in both AP4M1 and AZGP1 that account for the neurological signs and the morbid obesity of early onset, respectively. Contiguous gene syndromes are the consequence of loss of two or more adjacent genes sensible to gene dosage and the phenotype reflects a combination of endophenotypes. We propose to broaden this concept to phenotypes resulting from independent mutations in two genetically linked genes causing a contiguous mutation syndrome.
| S-EPMC4444163 | biostudies-literature
Project description:Viruses cause epidemics on all major crops of agronomic importance, and a timely and accurate identification is essential for control. High throughput sequencing (HTS) is a technology that allows the identification of all viruses without prior knowledge on the targeted pathogens. In this paper, we used HTS technique for the detection and identification of different viral species occurring in single and mixed infections in plants in Poland. We analysed various host plants representing different families. Within the 20 tested samples, we identified a total of 13 different virus species, including those whose presence has not been reported in Poland before: clover yellow mosaic virus (ClYMV) and melandrium yellow fleck virus (MYFV). Due to this new finding, the obtained sequences were compared with others retrieved from GenBank. In addition, cucurbit aphid-borne yellows virus (CABYV) was also detected, and due to the recent occurrence of this virus in Poland, a phylogenetic analysis of these new isolates was performed. The analysis revealed that CABYV population is highly diverse and the Polish isolates of CABYV belong to two different phylogenetic groups. Our results showed that HTS-based technology is a valuable diagnostic tool for the identification of different virus species originating from variable hosts, and can provide rapid information about the spectrum of plant viruses previously not detected in a region.
| S-EPMC7411967 | biostudies-literature
Project description:MOTIVATION:Several algorithms have been developed that use high-throughput sequencing technology to characterize structural variations (SVs). Most of the existing approaches focus on detecting relatively simple types of SVs such as insertions, deletions and short inversions. In fact, complex SVs are of crucial importance and several have been associated with genomic disorders. To better understand the contribution of complex SVs to human disease, we need new algorithms to accurately discover and genotype such variants. Additionally, due to similar sequencing signatures, inverted duplications or gene conversion events that include inverted segmental duplications are often characterized as simple inversions, likewise, duplications and gene conversions in direct orientation may be called as simple deletions. Therefore, there is still a need for accurate algorithms to fully characterize complex SVs and thus improve calling accuracy of more simple variants. RESULTS:We developed novel algorithms to accurately characterize tandem, direct and inverted interspersed segmental duplications using short read whole genome sequencing datasets. We integrated these methods to our TARDIS tool, which is now capable of detecting various types of SVs using multiple sequence signatures such as read pair, read depth and split read. We evaluated the prediction performance of our algorithms through several experiments using both simulated and real datasets. In the simulation experiments, using a 30× coverage TARDIS achieved 96% sensitivity with only 4% false discovery rate. For experiments that involve real data, we used two haploid genomes (CHM1 and CHM13) and one human genome (NA12878) from the Illumina Platinum Genomes set. Comparison of our results with orthogonal PacBio call sets from the same genomes revealed higher accuracy for TARDIS than state-of-the-art methods. Furthermore, we showed a surprisingly low false discovery rate of our approach for discovery of tandem, direct and inverted interspersed segmental duplications prediction on CHM1 (<5% for the top 50 predictions). AVAILABILITY AND IMPLEMENTATION:TARDIS source code is available at https://github.com/BilkentCompGen/tardis, and a corresponding Docker image is available at https://hub.docker.com/r/alkanlab/tardis/. SUPPLEMENTARY INFORMATION:Supplementary data are available at Bioinformatics online.
| S-EPMC6792081 | biostudies-literature
Project description:BackgroundDiscovering over-represented approximate motifs in DNA sequences is an essential part of bioinformatics. This topic has been studied extensively because of the increasing number of potential applications. However, it remains a difficult challenge, especially with the huge quantity of data generated by high throughput sequencing technologies. To overcome this problem, existing tools use greedy algorithms and probabilistic approaches to find motifs in reasonable time. Nevertheless these approaches lack sensitivity and have difficulties coping with rare and subtle motifs.ResultsWe developed DiNAMO (for DNA MOtif), a new software based on an exhaustive and efficient algorithm for IUPAC motif discovery. We evaluated DiNAMO on synthetic and real datasets with two different applications, namely ChIP-seq peaks and Systematic Sequencing Error analysis. DiNAMO proves to compare favorably with other existing methods and is robust to noise.ConclusionsWe shown that DiNAMO software can serve as a tool to search for degenerate motifs in an exact manner using IUPAC models. DiNAMO can be used in scanning mode with sliding windows or in fixed position mode, which makes it suitable for numerous potential applications.Availabilityhttps://github.com/bonsai-team/DiNAMO .
| S-EPMC5996464 | biostudies-literature
Project description:The African buffalo, Syncerus caffer, is one of the most abundant and ecologically important species of megafauna in the savannah ecosystem. It is an important prey species, as well as a host for a vast array of nematodes, pathogens and infectious diseases, such as bovine tuberculosis and corridor disease. Large-scale SNP discovery in this species would greatly facilitate further research into the area of host genetics and disease susceptibility, as well as provide a wealth of sequence information for other conservation and genomics studies. We sequenced pools of Cape buffalo DNA from a total of 9 animals, on an ABI SOLiD4 sequencer. The resulting short reads were mapped to the UMD3.1 Bos taurus genome assembly using both BWA and Bowtie software packages. A mean depth of 2.7× coverage over the mapped regions was obtained. Btau4 gene annotation was added to all SNPs identified within gene regions. Bowtie and BWA identified a maximum of 2,222,665 and 276,847 SNPs within the buffalo respectively, depending on analysis method. A panel of 173 SNPs was validated by fluorescent genotyping in 87 individuals. 27 SNPs failed to amplify, and of the remaining 146 SNPs, 43-54% of the Bowtie SNPs and 57-58% of the BWA SNPs were confirmed as polymorphic. dN/dS ratios found no evidence of positive selection, and although there were genes that appeared to be under negative selection, these were more likely to be slowly evolving house-keeping genes.
| S-EPMC3492240 | biostudies-literature