Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Na3.88Mo15Se19: a novel ternary reduced molybdenum selenide containing Mo6 and Mo9 clusters.

ABSTRACT: The structure of tetrasodium penta-deca-molybdenum nona-deca-selenide, Na3.88Mo15Se19, is isotypic with the In3+x Mo15Se19 compounds [Grüttner et al. (1979 ?). Acta Cryst. B35, 285-292]. It is characterized by two cluster units, Mo6Se (i) 8Se (a) 6 and Mo9Se (i) 11Se (a) 6 (where i represents inner and a apical atoms), that are present in a 1:1 ratio. The cluster units are centered at Wyckoff positions 2b and 2c and have point-group symmetry -3 and -6, respectively. The clusters are inter-connected through additional Mo-Se bonds. In the title compound, the Na(+) cations replace the trivalent as well as the monovalent indium atoms present in In3.9Mo15Se19. One Mo, one Se and one Na atom are situated on mirror planes, and two other Se atoms and one Na atom [occupancy 0.628?(14)] are situated on threefold rotation axes. The crystal studied was twinned by merohedry with refined components of 0.4216?(12) and 0.5784?(12).

SUBMITTER: Salloum D

PROVIDER: S-EPMC3790336 | biostudies-literature | 2013

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Na3.88Mo15Se19: a novel ternary reduced molybdenum selenide containing Mo6 and Mo9 clusters.

Salloum Diala D Gougeon Patrick P Gall Philippe P

Acta crystallographica. Section E, Structure reports online 20130925 Pt 10

The structure of tetrasodium penta-deca-molybdenum nona-deca-selenide, Na3.88Mo15Se19, is isotypic with the In3+x Mo15Se19 compounds [Grüttner et al. (1979 ▶). Acta Cryst. B35, 285-292]. It is characterized by two cluster units, Mo6Se (i) 8Se (a) 6 and Mo9Se (i) 11Se (a) 6 (where i represents inner and a apical atoms), that are present in a 1:1 ratio. The cluster units are centered at Wyckoff positions 2b and 2c and have point-group symmetry -3 and -6, respectively. The clusters are inter-connec ...[more]

PMID: 24098158

Similar Datasets

Na4.25Mo15S19: a novel ternary reduced molybdenum sulfide containing Mo6 and Mo9 clusters.

Project description:The structure of tetra-sodium penta-deca-molybdenum nona-deca-sulfide, Na4.25Mo15S19, is isotypic with Na3.9Mo15Se19 [Salloum et al. (2013 ?). Acta Cryst. E69, i67-i68]. It is characterized by Mo6S (i) 8S (a) 6 and Mo9S (i) 11S (a) 6 (where i represents inner and a apical atoms) cluster units that are present in a 1:1 ratio. The cluster units are centered at Wyckoff positions 2b and 2c, and have point-group symmetry -3 and -6, respectively. The clusters are inter-connected through additional Mo-S bonds. The Na(+) cations occupy inter-unit voids formed by six or seven S atoms. One Mo, one S and one Na site [occupancy 0.751?(12)] are situated on mirror planes, and two other S atoms and one Na site (full occupancy) are situated on threefold rotation axes.

| S-EPMC4051007 | biostudies-other

Crystal structure of Sc1.91In1.39Mo15Se19, containing Mo6 and Mo9 clusters.

Project description:The structure of scandium indium penta-deca-molybdenum nona-deca-selenide, Sc1.91In1.39Mo15Se19, is isotypic with In2.9Mo15Se19 [Grüttner et al. (1979 ▸). Acta Cryst. B35, 285-292]. It is characterized by two cluster units Mo6Se (i) 8Se (a) 6 and Mo9Se (i) 11Se (a) 6 (where i represents inner and a apical atoms) that are present in a 1:1 ratio. The cluster units are centered at Wyckoff positions 2b and 2c and have point-group symmetry -3 and -6, respectively. The clusters are inter-connected through additional Mo-Se bonds. Sc-Se and In-Se bonds complete the structural set-up. In the title compound, the Sc(3+) cations replace the trivalent indium atoms present in In2.9Mo15Se19, and a deficiency is observed at the monovalent indium site. One Mo, one Se and the Sc atom are situated on mirror planes, whereas two other Se atoms and the In atom are situated on threefold rotation axes.

| S-EPMC4518965 | biostudies-literature

Na2.9KMo12S14: a novel quaternary reduced molybdenum sulfide containing Mo12 clusters with a channel structure.

Project description:The crystal structure of tris-odium potassium dodeca-molybdenum tetra-deca-sulfide, Na2.9?(2)KMo12S14, consists of Mo12S14S6 cluster units inter-connected through inter-unit Mo-S bonds and delimiting channels in which the Na(+) cations are disordered. The cluster units are centered at Wyckoff positions 2d and have point-group symmetry 3.2. The K atom lies on sites with 3.2 symmetry (Wyckoff site 2c) between two consecutive Mo12S14S6 units. One of the three independent S atoms and one Na atom lie on sites with 3.. symmetry (Wyckoff sites 4e and 4f). The other Na atom occupies a 2b position with -3.. symmetry. The crystal studied was a merohedral twin with refined components of 0.4951?(13) and 0.5049?(13).

| S-EPMC3684867 | biostudies-other

Li2GeMo3O8: a novel reduced molybdenum oxide containing Mo3O13 cluster units.

Project description:The crystal structure of the title compound, dilithium germanium trimolybdenum octa-oxide, consists of distorted hexa-gonal-close-packed oxygen layers with stacking sequence ABAC along [001] that are held together by alternating lithium-germanium and molybdenum layers. The two Li(+) and Ge(4+) ions all have site symmetry 3m. and occupy, respectively, tetra-hedral and octa-hedral sites in the ratio 2:1. The Mo atom has a formal oxidation state of +3.3 and occupies an octa-hedral site (site symmetry .m.) and forms strongly bonded triangular cluster units [Mo-Mo distance = 2.4728?(8)?Å] involving three MoO6 octa-hedra that are each shared along two edges, constituting an Mo3O13 unit.

| S-EPMC4992923 | biostudies-literature

Stabilization of reduced molybdenum-iron-sulfur single- and double-cubane clusters by cyanide ligation.

Project description:Recent work has shown that cyanide ligation increases the redox potentials of Fe(4)S(4) clusters, enabling the isolation of [Fe(4)S(4)(CN)4]4-, the first synthetic Fe(4)S(4) cluster obtained in the all-ferrous oxidation state (Scott, T. A.; Berlinguette, C. P.; Holm, R. H.; Zhou, H.-C. Proc. Natl. Acad. Sci. U.S.A. 2005, 102, 9741). The generality of reduced cluster stabilization has been examined with MoFe(3)S(4) clusters. Reaction of single-cubane [(Tp)MoFe(3)S(4)(PEt(3))3]1+ and edge-bridged double-cubane [(Tp)2Mo(2)Fe(6)S(8)(PEt(3))4] with cyanide in acetonitrile affords [(Tp)MoFe(3)S(4)(CN)3]2- (2) and [(Tp)2Mo(2)Fe(6)S(8)(CN)4]4- (5), respectively. Reduction of 2 with KC(14)H(10) yields [(Tp)MoFe(3)S(4)(CN)3]3- (3). Clusters were isolated in approximately 70-90% yields as Et(4)N+ or Bu(4)N+ salts; clusters 3 and 5 contain all-ferrous cores, and 3 is the first [MoFe(3)S(4)]1+ cluster isolated in substance. The structures of 2 and 3 are very similar; the volume of the reduced cluster core is slightly larger (2.5%), a usual effect upon reduction of cubane-type Fe(4)S(4) and MFe(3)S(4) clusters. Redox potentials and 57Fe isomer shifts of [(Tp)MoFe(3)S(4)L3]2-,3- and [(Tp)2Mo(2)Fe(6)S(8)L(4)]4-,3- clusters with L = CN-, PhS-, halide, and PEt3 are compared. Clusters with pi-donor ligands (L = halide, PhS) exhibit larger isomer shifts and lower (more negative) redox potentials, while pi-acceptor ligands (L = CN, PEt3) induce smaller isomer shifts and higher (less-negative) redox potentials. When the potentials of 3/2 and [(Tp)MoFe(3)S(4)(SPh)3]3-/2- are compared, cyanide stabilizes 3 by 270 mV versus the reduced thiolate cluster, commensurate with the 310 mV stabilization of [Fe(4)S(4)(CN)4]4- versus [Fe(4)S(4)(SPh)4]4- where four ligands differ. These results demonstrate the efficacy of cyanide stabilization of lower cluster oxidation states. (Tp = hydrotris(pyrazolyl)borate(1-)).

| S-EPMC2546524 | biostudies-literature

In Situ Determination of Bisphenol A in Beverage Using a Molybdenum Selenide/Reduced Graphene Oxide Nanoparticle Composite Modified Glassy Carbon Electrode.

Project description:Due to the endocrine disturbing effects of bisphenol A (BPA) on organisms, rapid detection has become one of the most important techniques for monitoring its levels in the aqueous solutions associated with plastics and human beings. In this paper, a glassy carbon electrode (GCE) modified with molybdenum selenide/reduced graphene oxide (MoSe?/rGO) was fabricated for in situ determination of bisphenol A in several beverages. The surface area of the electrode dramatically increases due to the existence of ultra-thin nanosheets in a flower-like structure of MoSe?. Adding phosphotungstic acid in the electrolyte can significantly enhance the repeatability (RSD = 0.4%) and reproducibility (RSD = 2.2%) of the electrode. Under the optimized condition (pH = 6.5), the linear range of BPA was from 0.1 ?M?100 ?M and the detection limit was 0.015 ?M (S/N = 3). When using the as-prepared electrode for analyzing BPA in beverage samples without any pretreatments, the recoveries ranged from 98?107%, and the concentrations were from below the detection limit to 1.7 ?M, indicating its potential prospect for routine analysis of BPA.

| S-EPMC5982353 | biostudies-literature

Enhanced Electrochemical Behavior of Peanut-Shell Activated Carbon/Molybdenum Oxide/Molybdenum Carbide Ternary Composites.

Project description:Biomass-waste activated carbon/molybdenum oxide/molybdenum carbide ternary composites are prepared using a facile in-situ pyrolysis process in argon ambient with varying mass ratios of ammonium molybdate tetrahydrate to porous peanut shell activated carbon (PAC). The formation of MoO2 and Mo2C nanostructures embedded in the porous carbon framework is confirmed by extensive structural characterization and elemental mapping analysis. The best composite when used as electrodes in a symmetric supercapacitor (PAC/MoO2/Mo2C-1//PAC/MoO2/Mo2C-1) exhibited a good cell capacitance of 115 F g-1 with an associated high specific energy of 51.8 W h kg-1, as well as a specific power of 0.9 kW kg-1 at a cell voltage of 1.8 V at 1 A g-1. Increasing the specific current to 20 A g-1 still showcased a device capable of delivering up to 30 W h kg-1 specific energy and 18 kW kg-1 of specific power. Additionally, with a great cycling stability, a 99.8% coulombic efficiency and capacitance retention of ~83% were recorded for over 25,000 galvanostatic charge-discharge cycles at 10 A g-1. The voltage holding test after a 160 h floating time resulted in increase of the specific capacitance from 74.7 to 90 F g-1 at 10 A g-1 for this storage device. The remarkable electrochemical performance is based on the synergistic effect of metal oxide/metal carbide (MoO2/Mo2C) with the interconnected porous carbon. The PAC/MoO2/Mo2C ternary composites highlight promising Mo-based electrode materials suitable for high-performance energy storage. Explicitly, this work also demonstrates a simple and sustainable approach to enhance the electrochemical performance of porous carbon materials.

| S-EPMC8074364 | biostudies-literature

Liquid-like cationic sub-lattice in copper selenide clusters.

Project description:Super-ionic solids, which exhibit ion mobilities as high as those in liquids or molten salts, have been employed as solid-state electrolytes in batteries, improved thermoelectrics and fast-ion conductors in super-capacitors and fuel cells. Fast-ion transport in many of these solids is supported by a disordered, 'liquid-like' sub-lattice of cations mobile within a rigid anionic sub-lattice, often achieved at high temperatures or pressures via a phase transition. Here we show that ultrasmall clusters of copper selenide exhibit a disordered cationic sub-lattice under ambient conditions unlike larger nanocrystals, where Cu+ ions and vacancies form an ordered super-structure similar to the bulk solid. The clusters exhibit an unusual cationic sub-lattice arrangement wherein octahedral sites, which serve as bridges for cation migration, are stabilized by compressive strain. The room-temperature liquid-like nature of the Cu+ sub-lattice combined with the actively tunable plasmonic properties of the Cu2Se clusters make them suitable as fast electro-optic switches.

| S-EPMC5321727 | biostudies-literature

Enhanced Photocatalytic Activity and Stability in Hydrogen Evolution of Mo6 Iodide Clusters Supported on Graphene Oxide.

Project description:Catalytic properties of the cluster compound (TBA)2[Mo6Ii8(O2CCH3)a6] (TBA = tetrabutylammonium) and a new hybrid material (TBA)2Mo6Ii8@GO (GO = graphene oxide) in water photoreduction into molecular hydrogen were investigated. New hybrid material (TBA)2Mo6Ii8@GO was prepared by coordinative immobilization of the (TBA)2[Mo6Ii8(O2CCH3)a6] onto GO sheets and characterized by spectroscopic, analytical, and morphological techniques. Liquid and, for the first time, gas phase conditions were chosen for catalytic experiments under UV-Vis irradiation. In liquid water, optimal H2 production yields were obtained after using (TBA)2[Mo6Ii8(O2CCH3)a6] and (TBA)2Mo6Ii8@GO) catalysts after 5 h of irradiation of liquid water. Despite these remarkable catalytic performances, "liquid-phase" catalytic systems have serious drawbacks: the cluster anion evolves to less active cluster species with partial hydrolytic decomposition, and the nanocomposite completely decays in the process. Vapor water photoreduction showed lower catalytic performance but offers more advantages in terms of cluster stability, even after longer radiation exposure times and recyclability of both catalysts. The turnover frequency (TOF) of (TBA)2Mo6Ii8@GO is three times higher than that of the microcrystalline (TBA)2[Mo6Ii8(O2CCH3)a6], in agreement with the better accessibility of catalytic cluster sites for water molecules in the gas phase. This bodes well for the possibility of creating {Mo6I8}4+-based materials as catalysts in hydrogen production technology from water vapor.

| S-EPMC7407389 | biostudies-literature

Selenide-Containing Polyimides with an Ultrahigh Intrinsic Refractive Index.

Project description:This work developed novel selenium-containing polyimides with a high intrinsic refractive index. Four polyimides with different selenium contents and repeat unit structures were designed and synthesized via amine-dianhydride polycondensation of one of two diamines, i.e., 4,4'-oxydianiline or bis(4-aminophenyl)selanide, with one of two dianhydrides, i.e., bis(4-(3,4-dicarboxylbenzoyloxy)phenyl) ester dianhydride or 1,1'-bis(4-(3,4-dicarboxylbenzoyloxy)phenyl) selenide dianhydride. Various techniques, e.g., nuclear magnetic resonance, Fourier transformed infrared spectroscopy, and wide-angle X-ray diffraction, were used to characterize the polymers' structures. Differential scanning calorimetry, thermogravimetric analysis, ultraviolet-visible spectroscopy, and spectroscopic ellipsometry were used to characterize the properties of the polymers. The selenium contents showed a positive effect on the refractive index of the final polymer. In addition, the refractive index can reach up to 1.968 at 633 nm, which was the highest intrinsic refractive index of a polyimide ever reported. Because of the high intrinsic refractive index, the reflective ratio of visible light on the surface of a silicon wafer was significantly reduced, indicating the potentially utility of the polymer in an anti-reflection coating.

| S-EPMC6415271 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data