Laboratory tests and compliance of dermatologic outpatients.
Ontology highlight
ABSTRACT:
SUBMITTER: Shin WU
PROVIDER: S-EPMC3869483 | biostudies-literature | 2013
REPOSITORIES: biostudies-literature
Publications
Laboratory tests and compliance of dermatologic outpatients.
Shin Won Ung WU Baek Yoo Sang YS Kim Tom Joonhwan TJ Oh Chil Hwan CH Kim Jaehwan J
F1000Research 20131007
Laboratory tests, including blood tests and urine analysis, are frequently performed in the dermatology outpatient clinic, but doctors often do not consider the cognitive or psychological effect of the examinations. Based on terror management theory, we hypothesized that performing laboratory tests increases the patient's fear of mortality, and therefore has a positive effect on the patient's attitude toward the doctor's recommendations and willingness to accept them. The study employed a single ...[more]
Similar Datasets
Project description:Laboratory tests are performed to make effective clinical decisions. However, inappropriate laboratory test ordering hampers patient care and increases financial burden for healthcare. An automated laboratory test recommendation system can provide rapid and appropriate test selection, potentially improving the workflow to help physicians spend more time treating patients. The main objective of this study was to develop a deep learning-based automated system to recommend appropriate laboratory tests. A retrospective data collection was performed at the National Health Insurance database between 1 January 2013, and 31 December 2013. We included all prescriptions that had at least one laboratory test. A total of 1,463,837 prescriptions from 530,050 unique patients was included in our study. Of these patients, 296,541 were women (55.95%), the range of age was between 1 and 107 years. The deep learning (DL) model achieved a higher area under the receiver operating characteristics curve (AUROC micro = 0.98, and AUROC macro = 0.94). The findings of this study show that the DL model can accurately and efficiently identify laboratory tests. This model can be integrated into existing workflows to reduce under- and over-utilization problems.
| S-EPMC8227070 | biostudies-literature
Project description:Muscle strength is important for firefighters work capacity. Laboratory tests used for measurements of muscle strength, however, are complicated, expensive and time consuming. The aims of the present study were to investigate correlations between physical capacity within commonly occurring and physically demanding firefighting work tasks and both laboratory and field tests in full time (N = 8) and part-time (N = 10) male firefighters and civilian men (N = 8) and women (N = 12), and also to give recommendations as to which field tests might be useful for evaluating firefighters' physical work capacity. Laboratory tests of isokinetic maximal (IM) and endurance (IE) muscle power and dynamic balance, field tests including maximal and endurance muscle performance, and simulated firefighting work tasks were performed. Correlations with work capacity were analyzed with Spearman's rank correlation coefficient (rs). The highest significant (p<0.01) correlations with laboratory and field tests were for Cutting: IE trunk extension (rs = 0.72) and maximal hand grip strength (rs = 0.67), for Stairs: IE shoulder flexion (rs = -0.81) and barbell shoulder press (rs = -0.77), for Pulling: IE shoulder extension (rs = -0.82) and bench press (rs = -0.85), for Demolition: IE knee extension (rs = 0.75) and bench press (rs = 0.83), for Rescue: IE shoulder flexion (rs = -0.83) and bench press (rs = -0.82), and for the Terrain work task: IE trunk flexion (rs = -0.58) and upright barbell row (rs = -0.70). In conclusion, field tests may be used instead of laboratory tests. Maximal hand grip strength, bench press, chin ups, dips, upright barbell row, standing broad jump, and barbell shoulder press were strongly correlated (rs≥0.7) with work capacity and are therefore recommended for evaluating firefighters work capacity.
| S-EPMC3948787 | biostudies-other
Project description:Electronic health record (EHR) data show promise for deriving new ways of modeling human disease states. Although EHR researchers often use numerical values of laboratory tests as features in disease models, a great deal of information is contained in the context within which a laboratory test is taken. For example, the same numerical value of a creatinine test has different interpretation for a chronic kidney disease patient and a patient with acute kidney injury. We study whether EHR research studies are subject to biased results and interpretations if laboratory measurements taken in different contexts are not explicitly separated. We show that the context of a laboratory test measurement can often be captured by the way the test is measured through time. We perform three tasks to study the properties of these temporal measurement patterns. In the first task, we confirm that laboratory test measurement patterns provide additional information to the stand-alone numerical value. The second task identifies three measurement pattern motifs across a set of 70 laboratory tests performed for over 14,000 patients. Of these, one motif exhibits properties that can lead to biased research results. In the third task, we demonstrate the potential for biased results on a specific example. We conduct an association study of lipase test values to acute pancreatitis. We observe a diluted signal when using only a lipase value threshold, whereas the full association is recovered when properly accounting for lipase measurements in different contexts (leveraging the lipase measurement patterns to separate the contexts). Aggregating EHR data without separating distinct laboratory test measurement patterns can intermix patients with different diseases, leading to the confounding of signals in large-scale EHR analyses. This paper presents a methodology for leveraging measurement frequency to identify and reduce laboratory test biases.
| S-EPMC4194228 | biostudies-literature
Project description:BACKGROUND:There is little data on Trichomonas vaginalis infection in Ghana. This study evaluated the prevalence of trichomoniasis using different diagnostic methods and determined the risk factors for infection in patients. METHODS:A structured questionnaire was administered. Vaginal swabs, urethral swabs and urine specimens were obtained from consenting patients; and the samples processed following standard protocols. The presence of T. vaginalis was determined using wet mount microscopy and polymerase chain reaction (PCR) as gold standard. We also assessed the diagnostic performance the JD's Trichomonas V® rapid antigen test to inform clinical practice. RESULTS:The PCR assay detected T. vaginalis positivity in 64 of 150 patients (42.6, 95%CI:35.0, 50.6) including all positive samples of wet mount microscopy and JD's Trichomonas V® test. Wet mount microscopy showed low sensitivity (31.6%), high specificity (100%), moderate positive predictive value (75.0%), moderate positive likelihood ratio (3.0), and weak agreement (Cohen's kappa, 0.283) with PCR assay. The JD's Trichomonas V® test displayed lower sensitivity (25.0%), specificity (83.3%), and weaker measure of agreement (Cohen's kappa, 0.233) with PCR. In multivariate analysis, the strongest independent predictor for T. vaginalis was female gender [adjusted odds ratio (AOR), 24.89; 95% confidence interval (CI): 10.58, 51.21; P-value<?0.001]. Knowledge of STI showed a protective effect against infection with the parasite (AOR, 0.13; 95%CI: 0.07, 0.29; P-value<?0.017). CONCLUSION:The sensitivity of wet mount microscopy was low for T. vaginalis screening in our region. The JD's Trichomonas V® test should not be considered as an alternative test. We recommend mandatory PCR assay for confirmation of negative wet mount results.
| S-EPMC6307156 | biostudies-literature
Project description: Not available
| S-EPMC8086426 | biostudies-literature
Project description:Psoriasis is a chronic inflammatory skin disease that affects approximately 125 million people worldwide. It has significant impacts on both physical and emotional health-related quality of life comparable to other major illnesses. Accurately prediction of psoriasis using biomarkers from routine laboratory tests has important practical values. Our goal is to derive a powerful predictive model for psoriasis disease based on only routine hospital tests. We collected a data set including 466 psoriasis patients and 520 healthy controls with 81 variables from only laboratory routine tests, such as age, total cholesterol, HDL cholesterol, blood pressure, albumin, and platelet distribution width. In this study, Boruta feature selection method was applied to select the most relevant features, with which a Random Forest model was constructed. The model was tested with 30 repetitions of 10-fold cross-validation. Our classification model yielded an average accuracy of 86.9%. 26 notable features were selected by Boruta, among which 15 features are confirmed from previous studies, and the rest are worth further investigations. The experimental results demonstrate that the machine learning approach has good potential in predictive modeling for the psoriasis disease given the information only from routine hospital tests.
| S-EPMC8525763 | biostudies-literature
Project description:ImportanceLaboratory testing is an important target for high-value care initiatives, constituting the highest volume of medical procedures. Prior studies have found that up to half of all inpatient laboratory tests may be medically unnecessary, but a systematic method to identify these unnecessary tests in individual cases is lacking.ObjectiveTo systematically identify low-yield inpatient laboratory testing through personalized predictions.Design, setting, and participantsIn this retrospective diagnostic study with multivariable prediction models, 116 637 inpatients treated at Stanford University Hospital from January 1, 2008, to December 31, 2017, a total of 60 929 inpatients treated at University of Michigan from January 1, 2015, to December 31, 2018, and 13 940 inpatients treated at the University of California, San Francisco from January 1 to December 31, 2018, were assessed.Main outcomes and measuresDiagnostic accuracy measures, including sensitivity, specificity, negative predictive values (NPVs), positive predictive values (PPVs), and area under the receiver operating characteristic curve (AUROC), of machine learning models when predicting whether inpatient laboratory tests yield a normal result as defined by local laboratory reference ranges.ResultsIn the recent data sets (July 1, 2014, to June 30, 2017) from Stanford University Hospital (including 22 664 female inpatients with a mean [SD] age of 58.8 [19.0] years and 22 016 male inpatients with a mean [SD] age of 59.0 [18.1] years), among the top 20 highest-volume tests, 792 397 were repeats of orders within 24 hours, including tests that are physiologically unlikely to yield new information that quickly (eg, white blood cell differential, glycated hemoglobin, and serum albumin level). The best-performing machine learning models predicted normal results with an AUROC of 0.90 or greater for 12 stand-alone laboratory tests (eg, sodium AUROC, 0.92 [95% CI, 0.91-0.93]; sensitivity, 98%; specificity, 35%; PPV, 66%; NPV, 93%; lactate dehydrogenase AUROC, 0.93 [95% CI, 0.93-0.94]; sensitivity, 96%; specificity, 65%; PPV, 71%; NPV, 95%; and troponin I AUROC, 0.92 [95% CI, 0.91-0.93]; sensitivity, 88%; specificity, 79%; PPV, 67%; NPV, 93%) and 10 common laboratory test components (eg, hemoglobin AUROC, 0.94 [95% CI, 0.92-0.95]; sensitivity, 99%; specificity, 17%; PPV, 90%; NPV, 81%; creatinine AUROC, 0.96 [95% CI, 0.96-0.97]; sensitivity, 93%; specificity, 83%; PPV, 79%; NPV, 94%; and urea nitrogen AUROC, 0.95 [95% CI, 0.94, 0.96]; sensitivity, 87%; specificity, 89%; PPV, 77%; NPV 94%).Conclusions and relevanceThe findings suggest that low-yield diagnostic testing is common and can be systematically identified through data-driven methods and patient context-aware predictions. Implementing machine learning models appear to be able to quantify the level of uncertainty and expected information gained from diagnostic tests explicitly, with the potential to encourage useful testing and discourage low-value testing that incurs direct costs and indirect harms.
| S-EPMC6739729 | biostudies-literature
Project description:In this report, we describe the first national scale multi-laboratory evaluation of monkeypox virus (MPXV) DNA commercial PCR kits. The objective of this study was to evaluate 2 kits by different diagnostic laboratories across Israel. Ten standardized samples were tested simultaneously using the Novaplex (15 laboratories) and Bio-Speedy (seven laboratories) kits. An in-house assay based on previously published reactions was used as reference. Comparison of the results showed high intra-assay agreement between laboratories, with small variations for most samples. The in-house assay had an analytical detection limit of less than 10 copies per reaction. While the 2 commercial kits were able to detect specimens with low viral loads similarly to the in-house assay, significant differences were observed, in the Cq values and relative fluorescence (RF), between the assays. The RF signal of the in-house and Bio-Speedy assays ranged between 5,000 and 10,000 RFU, while the signal in the Novaplex assay was less than 600 RFU. Due to the kit measurement protocol, the Cq values of the Bio-Speedy kit were 5 to 7.5 cycles lower than those of the in-house assay. On the contrary, the Cq values of the Novaplex kit were significantly higher than those of the in-house assay, with differences of 3 to 5 cycles per sample. Our results suggest that while all assays were similar in their overall sensitivity, direct comparison of Cq values between them may be misleading. To our knowledge, this is the first methodical evaluation of commercial MPX test kits. We therefore anticipate that this study would help diagnostic laboratories in choosing a specific MPX detection assay. IMPORTANCE To the best of our knowledge, this study is the first methodical evaluation of commercial kits designed for Monkeypox virus detection. This was done by performing the same tests using the same sample set in multiple laboratories, simultaneously, on a national scale. It therefore provides important and unique information on the performance of such kits and provides a guideline for choosing the assay of choice for monkeypox virus diagnosis in a standard diagnostic laboratory. It also demonstrates potential complications when trying to compare the results of different assays, even when testing exactly the same samples, under identical conditions.
| S-EPMC10269769 | biostudies-literature
Project description:Next-generation sequencing (NGS) has recently emerged as an essential component of personalized cancer medicine due to its high throughput and low per-base cost. However, no sufficient guidelines for implementing NGS as a clinical molecular pathology test are established in Korea. To ensure clinical grade quality without inhibiting adoption of NGS, a taskforce team assembled by the Korean Society of Pathologists developed laboratory guidelines for NGS cancer panel testing procedures and requirements for clinical implementation of NGS. This consensus standard proposal consists of two parts: laboratory guidelines and requirements for clinical NGS laboratories. The laboratory guidelines part addressed several important issues across multistep NGS cancer panel tests including choice of gene panel and platform, sample handling, nucleic acid management, sample identity tracking, library preparation, sequencing, analysis and reporting. Requirements for clinical NGS tests were summarized in terms of documentation, validation, quality management, and other required written policies. Together with appropriate pathologist training and international laboratory standards, these laboratory standards would help molecular pathology laboratories to successfully implement NGS cancer panel tests in clinic. In this way, the oncology community would be able to help patients to benefit more from personalized cancer medicine.
| S-EPMC5445206 | biostudies-literature
Project description:BACKGROUND:Rapid diagnostic tests (RDT) for cholera are promising tools for detecting cholera in areas with limited laboratory infrastructure. However, evidence on the characteristics of the many available RDTs is scarce, and their use has been limited by suboptimal performance. We evaluated the performance characteristics of three cholera RDTs from Span Diagnostics, Artron Laboratories, and Standard Diagnostics in a regional laboratory in Haiti. METHODOLOGY/PRINCIPAL FINDINGS:We retrospectively reviewed records from May 2014 to October 2015 of a laboratory-based surveillance program for Vibrio cholerae at Hôpital Saint-Nicolas in Saint-Marc, Haiti. We compared the results of 511 Crystal VC, 129 Artron and 451 SD Bioline RDTs to bacterial culture as the gold standard. Of 905 cultures, 477 (52.7%) were positive for V. cholerae O1, of which 27.7% were serotype Inaba. No cultures grew V. cholerae O139. Sensitivity and specificity of Crystal VC were 98.6% (95%CI: 96.5%-99.6%) and 71.1% (95%CI: 64.7%-76.9%), respectively. Artron demonstrated a sensitivity of 98.6% (95%CI: 92.7%-100%) and specificity of 69.1% (95%CI: 55.2%-80.9%). SD Bioline demonstrated a sensitivity of 81.1% (95%CI: 75.6%-85.8%) and specificity of 92.8% (95%CI: 88.4%-95.9%). Crystal VC and Artron frequently showed false positive O139 bands, whereas none were seen with SD Bioline. CONCLUSIONS/SIGNIFICANCE:There is significant variation in the performance of different cholera diagnostic RDTs. Artron and Crystal VC RDTs have high sensitivity and low specificity, while SD Bioline RDT has low to moderate sensitivity and high specificity when performed by laboratory technicians in Haiti. Study limitations included its retrospective design. The suboptimal characteristics of these tests limit their use as clinical point-of-care tests; however, they may be useful in outbreak response, surveillance, and research in resource-limited settings.
| S-EPMC5665506 | biostudies-literature