Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A shear localization mechanism for lubricity of amorphous carbon materials.

ABSTRACT: Amorphous carbon is one of the most lubricious materials known, but the mechanism is not well understood. It is counterintuitive that such a strong covalent solid could exhibit exceptional lubricity. A prevailing view is that lubricity of amorphous carbon results from chemical passivation of dangling bonds on surfaces. Here we show instead that lubricity arises from shear induced strain localization, which, instead of homogeneous deformation, dominates the shearing process. Shear localization is characterized by covalent bond reorientation, phase transformation and structural ordering preferentially in a localized region, namely tribolayer, resulting in shear weakening. We further demonstrate an anomalous pressure induced transition from stick-slip friction to continuous sliding with ultralow friction, due to gradual clustering and layering of graphitic sheets in the tribolayer. The proposed shear localization mechanism sheds light on the mechanism of superlubricity, and would enrich our understanding of lubrication mechanism of a wide variety of amorphous materials.

SUBMITTER: Ma TB

PROVIDER: S-EPMC3888979 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Silicon/Graphite/Amorphous Carbon as Anode Materials for Lithium Secondary Batteries.

Project description:Although silicon is being researched as one of the most promising anode materials for future generation lithium-ion batteries owing to its greater theoretical capacity (3579 mAh g-1), its practical applicability is hampered by its worse rate properties and poor cycle performance. Herein, a silicon/graphite/amorphous carbon (Si/G/C) anode composite material has been successfully prepared by a facile spray-drying method followed by heating treatment, exhibiting excellent electrochemical performance compared with silicon/amorphous carbon (Si/C) in lithium-ion batteries. At 0.1 A g-1, the Si/G/C sample exhibits a high initial discharge capacity of 1886 mAh g-1, with a high initial coulombic efficiency of 90.18%, the composite can still deliver a high initial charge capacity of 800 mAh g-1 at 2 A g-1, and shows a superior cyclic and rate performance compared to the Si/C anode sample. This work provides a facile approach to synthesize Si/G/C composite for lithium-ion batteries and has proven that graphite replacing amorphous carbon can effectively improve the electrochemical performance, even using low-performance micrometer silicon and large size flake graphite.

| S-EPMC9865035 | biostudies-literature

Ir Single Atom Catalyst Loaded on Amorphous Carbon Materials with High HER Activity.

Project description:The research of high efficiency water splitting catalyst is important for the development of renewable energy economy. Here, the progress in the preparation of high efficiency hydrogen evolution reaction (HER) catalyst is reported. The support material is based on a polyhexaphenylbenzene material with intrinsic holes, which heals into carbon materials upon heating. The healing process is found to be useful for anchoring various transition metal atoms, among which the supported Ir Single-atom catalyst (SAC) catalyst shows much higher electrocatalytic activity and stability than the commercial Pt/C and Ir/C in HER. There is only 17 mV overpotential at 10 mA cm-2 , which is significantly lower than that of commercial Pt/C and Ir/C catalysts respectively by 26 and 3 mV, and the catalyst has an ultra-high mass activity (MA) of 51.6 AmgIr-1${\text{ A mg}}_{{\rm{Ir}}}^{ - 1}$ at 70 mV potential and turn over frequencies (TOF) of 171.61 s-1 at the potential of 100 mV. The density functional theory (DFT) calculation reveals the significant role of carbon coordination around the Ir center. A series of monatomic PBN-300-M are synthesized by using of designed carbon materials. The findings provide an enabling and versatile platform for facile accessing SACs toward many industrial important reactions.

| S-EPMC9069379 | biostudies-literature

Connecting shear localization with the long-range correlated polarized stress fields in granular materials.

Project description:One long-lasting puzzle in amorphous solids is shear localization, where local plastic deformation involves cooperative particle rearrangements in small regions of a few inter-particle distances, self-organizing into shear bands and eventually leading to the material failure. Understanding the connection between the structure and dynamics of amorphous solids is essential in physics, material sciences, geotechnical and civil engineering, and geophysics. Here we show a deep connection between shear localization and the intrinsic structures of internal stresses in an isotropically jammed granular material subject to shear. Specifically, we find strong (anti)correlations between the micro shear bands and two polarized stress fields along two directions of maximal shear. By exploring the tensorial characteristics and the rotational symmetry of force network, we reveal that such profound connection is a result of symmetry breaking by shear. Finally, we provide the solid experimental evidence of long-range correlated inherent shear stress in an isotropically jammed granular system.

| S-EPMC7455740 | biostudies-literature

Unravelling the amorphous structure and crystallization mechanism of GeTe phase change memory materials.

Project description:The reversible phase transitions in phase-change memory devices can switch on the order of nanoseconds, suggesting a close structural resemblance between the amorphous and crystalline phases. Despite this, the link between crystalline and amorphous tellurides is not fully understood nor quantified. Here we use in-situ high-temperature x-ray absorption spectroscopy (XAS) and theoretical calculations to quantify the amorphous structure of bulk and nanoscale GeTe. Based on XAS experiments, we develop a theoretical model of the amorphous GeTe structure, consisting of a disordered fcc-type Te sublattice and randomly arranged chains of Ge atoms in a tetrahedral coordination. Strikingly, our intuitive and scalable model provides an accurate description of the structural dynamics in phase-change memory materials, observed experimentally. Specifically, we present a detailed crystallization mechanism through the formation of an intermediate, partially stable 'ideal glass' state and demonstrate differences between bulk and nanoscale GeTe leading to size-dependent crystallization temperature.

| S-EPMC10837456 | biostudies-literature

Nucleation of shear bands in amorphous alloys.

Project description:The initiation and propagation of shear bands is an important mode of localized inhomogeneous deformation that occurs in a wide range of materials. In metallic glasses, shear band development is considered to center on a structural heterogeneity, a shear transformation zone that evolves into a rapidly propagating shear band under a shear stress above a threshold. Deformation by shear bands is a nucleation-controlled process, but the initiation process is unclear. Here we use nanoindentation to probe shear band nucleation during loading by measuring the first pop-in event in the load-depth curve which is demonstrated to be associated with shear band formation. We analyze a large number of independent measurements on four different bulk metallic glasses (BMGs) alloys and reveal the operation of a bimodal distribution of the first pop-in loads that are associated with different shear band nucleation sites that operate at different stress levels below the glass transition temperature, Tg. The nucleation kinetics, the nucleation barriers, and the density for each site type have been determined. The discovery of multiple shear band nucleation sites challenges the current view of nucleation at a single type of site and offers opportunities for controlling the ductility of BMG alloys.

| S-EPMC3964102 | biostudies-literature

Growth Mechanism for Low Temperature PVD Graphene Synthesis on Copper Using Amorphous Carbon.

Project description:Growth mechanism for synthesizing PVD based Graphene using Amorphous Carbon, catalyzed by Copper is investigated in this work. Different experiments with respect to Amorphous Carbon film thickness, annealing time and temperature are performed for the investigation. Copper film stress and its effect on hydrogen diffusion through the film grain boundaries are found to be the key factors for the growth mechanism, and supported by our Finite Element Modeling. Low temperature growth of Graphene is achieved and the proposed growth mechanism is found to remain valid at low temperatures.

| S-EPMC5343459 | biostudies-literature

Reduction of Photoluminescence Quenching by Deuteration of Ytterbium-Doped Amorphous Carbon-Based Photonic Materials.

Project description:In situ Yb-doped amorphous carbon thin films were grown on Si substrates at low temperatures (<200 °C) by a simple one-step RF-PEMOCVD system as a potential photonic material for direct integration with Si CMOS back end-of-line processing. Room temperature photoluminescence around 1 µm was observed via direct incorporation of optically active Yb3+ ions from the selected Yb(fod)₃ metal-organic compound. The partially fluorinated Yb(fod)₃ compound assists the suppression of photoluminescence quenching by substitution of C-H with C-F bonds. A four-fold enhancement of Yb photoluminescence was demonstrated via deuteration of the a-C host. The substrate temperature greatly influences the relative deposition rate of the plasma dissociated metal-organic species, and hence the concentration of the various elements. Yb and F incorporation are promoted at lower substrate temperatures, and suppressed at higher substrate temperatures. O concentration is slightly elevated at higher substrate temperatures. Photoluminescence was limited by the concentration of Yb within the film, the concentration of Yb ions in the +3 state, and the relative amount of quenching due to the various de-excitation pathways associated with the vibrational modes of the host a-C network. The observed wide full-width-at-half-maximum photoluminescence signal is a result of the variety of local bonding environments due to the a-C matrix, and the bonding of the Yb3+ ions to O and/or F ions as observed in the X-ray photoelectron spectroscopy analyses.

| S-EPMC5456179 | biostudies-other

Uncovering ?-relaxations in amorphous phase-change materials.

Project description:Relaxation processes are decisive for many physical properties of amorphous materials. For amorphous phase-change materials (PCMs) used in nonvolatile memories, relaxation processes are, however, difficult to characterize because of the lack of bulk samples. Here, instead of bulk samples, we use powder mechanical spectroscopy for powder samples to detect the prominent excess wings-a characteristic feature of ?-relaxations-in a series of amorphous PCMs at temperatures below glass transitions. By contrast, ?-relaxations are vanishingly small in amorphous chalcogenides of similar composition, which lack the characteristic features of PCMs. This conclusion is corroborated upon crossing the border from PCMs to non-PCMs, where ?-relaxations drop substantially. Such a distinction implies that amorphous PCMs belong to a special kind of covalent glasses whose locally fast atomic motions are preserved even below the glass transitions. These findings suggest a correlation between ?-relaxation and crystallization kinetics of PCMs, which have technological implications for phase-change memory functionalities.

| S-EPMC6954054 | biostudies-literature

Inversion of diffraction data for amorphous materials.

Project description:The general and practical inversion of diffraction data-producing a computer model correctly representing the material explored-is an important unsolved problem for disordered materials. Such modeling should proceed by using our full knowledge base, both from experiment and theory. In this paper, we describe a robust method to jointly exploit the power of ab initio atomistic simulation along with the information carried by diffraction data. The method is applied to two very different systems: amorphous silicon and two compositions of a solid electrolyte memory material silver-doped GeSe3. The technique is easy to implement, is faster and yields results much improved over conventional simulation methods for the materials explored. By direct calculation, we show that the method works for both poor and excellent glass forming materials. It offers a means to add a priori information in first-principles modeling of materials, and represents a significant step toward the computational design of non-crystalline materials using accurate interatomic interactions and experimental information.

| S-EPMC5031976 | biostudies-literature

Toughening Fe-based Amorphous Coatings by Reinforcement of Amorphous Carbon.

Project description:Toughening of Fe-based amorphous coatings meanwhile maintaining a good corrosion resistance remains challenging. This work reports a novel approach to improve the toughness of a FeCrMoCBY amorphous coating through in-situ formation of amorphous carbon reinforcement without reducing the corrosion resistance. The Fe-based composite coating was prepared by high velocity oxy-fuel (HVOF) thermal spraying using a pre-mixed Fe-based amorphous/nylon-11 polymer feedstock powders. The nylon-11 powders were in-situ carbonized to amorphous carbon phase during thermal spraying process, which homogeneously distributed in the amorphous matrix leading to significant enhancement of toughness of the coating. The mechanical properties, including hardness, impact resistance, bending and fatigue strength, were extensively studied by using a series of mechanical testing techniques. The results revealed that the composite coating reinforced by amorphous carbon phase exhibited enhanced impact resistance and nearly twice-higher fatigue strength than that of the monolithic amorphous coating. The enhancement of impact toughness and fatigue properties is owed to the dumping effect of the soft amorphous carbon phase, which alleviated stress concentration and decreased crack propagation driving force.

| S-EPMC5481419 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data