Inspiratory Flows and Volumes in Subjects with Non-CF Bronchiectasis Using a New Dry Powder Inhaler Device.
Ontology highlight
ABSTRACT:
SUBMITTER: Elkins MR
PROVIDER: S-EPMC3933772 | biostudies-literature | 2014
REPOSITORIES: biostudies-literature
Publications
Inspiratory Flows and Volumes in Subjects with Non-CF Bronchiectasis Using a New Dry Powder Inhaler Device.
Elkins Mark R MR Anderson Sandra D SD Perry Clare P CP Daviskas Evangelia E Charlton Brett B
The open respiratory medicine journal 20140124
<h4>Introduction</h4>Drug inhalation via a dry-powder inhaler (DPI) is a convenient, time efficient alternative to nebulizers in the treatment of cystic fibrosis (CF) or non-CF bronchiectasis. Efficient drug administration via DPIs depends on the device resistance and adequate (≥45L/min) inspiratory flows and volumes generated by individuals. Drypowder mannitol is delivered using a RS01 breath-actuated device developed by Plastiape, for Pharmaxis. The study aim was to determine in vivo if non-CF ...[more]
Similar Datasets
Project description:INTRODUCTION:Drug inhalation via a dry-powder inhaler (DPI) is a convenient, time efficient alternative to nebulizers in the treatment of cystic fibrosis (CF). Efficient drug administration via DPIs depends on the device resistance and adequate (? 45L/min) inspiratory flows and volumes generated by individuals. Dry-powder mannitol is delivered using a RS01 breath-actuated device developed by Plastiape, for Pharmaxis. The study aim was to determine in vivo if CF patients' inspiratory flows and volumes are adequate to use the RS01 DPI device. MATERIALS AND METHODOLOGY:An open, non-interventional study; enrolled 25 CF subjects, aged ? 6 years with FEV1 ? 30 to < 90‰ predicted. Inspiratory flows and volumes were measured when subjects inhaled in a controlled manner through the RS01 device in series with a spirometer. RESULTS:The mean inspiratory volume (IV) of CF subjects was 1.83L ± 0.97. Their achieved mean ± SD peak inspiratory flow (PIF) was 75.5 ± 27.2L/min. Twenty-three subjects (92%) achieved PIF of > 45L/min with the inhaler device; eighteen of those subjects (78%) had a baseline FEV1 of > 1L. CONCLUSION:Use of the RS01 DPI device allowed adequate inspiratory flow and volume for dispersion of dry-powder mannitol in CF patients.
| S-EPMC3933773 | biostudies-literature
Project description:Relative to healthy subjects, patients with pulmonary arterial hypertension often present with decreased respiratory muscle strength, resulting in decreased maximum inspiratory pressure. Little is known about the impact of reduced respiratory muscle strength on the ability to achieve the peak inspiratory pressures needed for effective drug delivery when using portable dry powder inhalers (≥1.0 kPa). The objective of this study was to assess the impact of inhaler resistance and patient instruction on the inspiratory flow profiles of pulmonary arterial hypertension patients when using breath-actuated dry powder inhalers. The inspiratory flow profiles of 35 patients with pulmonary arterial hypertension were measured with variants of the RS01 dry powder inhaler. Profiles were determined with a custom inspiratory flow profile recorder. Results showed that going from the low resistance RS01 dry powder inhaler to the high resistance AOS® dry powder inhaler led to increases in mean peak inspiratory pressures for pulmonary arterial hypertension subjects from 3.7 kPa to 6.5 kPa. Instructions that ask pulmonary arterial hypertension subjects to inhale with maximal effort until their lungs are full led to a mean peak inspiratory pressures of 6.0 kPa versus 2.1 kPa when the same subjects are asked to inhale comfortably. Significant decreases in mean peak inspiratory pressures are also observed with decreases in lung function, with a mean peak inspiratory pressures of 7.2 kPa for subjects with FEV1 > 60% predicted, versus 3.3 kPa for those subjects with FEV1 < 50% predicted. In conclusion, despite having reduced respiratory muscle strength, subjects with pulmonary arterial hypertension can effectively use a breath-actuated dry powder inhaler. The probability of achieving effective dose delivery may be increased by using dry powder inhalers with increased device resistance, particularly when subjects do not follow the prescribed instructions and inhale comfortably.
| S-EPMC7829465 | biostudies-literature
Project description:BackgroundInhaler selection is important when managing respiratory conditions; a patient's inhalation technique should be appropriate for the selected device, and patients should ideally be able to use a device successfully regardless of disease severity. The NEXThaler is a multidose dry-powder inhaler with a breath-actuated mechanism (BAM) and dose counter that activates only following inhalation, so effectively an 'inhalation counter'. We assessed inspiratory flow through the NEXThaler in two studies and examined whether inhalation triggered the BAM.MethodsThe two studies were open-label, single-arm, and single visit. One study recruited patients with asthma aged???18 years; the other recruited patients with chronic obstructive pulmonary disease (COPD) aged???40 years. All patients inhaled twice through a placebo NEXThaler. The inspiratory profile through the device was assessed for each inhalation using acoustic monitoring, with flow at and time to BAM firing, peak inspiratory flow (PIF), and total inhalation time assessed.ResultsA total of 40 patients were enrolled in the asthma study: 20 with controlled asthma and 20 with partly controlled/uncontrolled asthma. All patients were able to trigger the BAM, as evidenced by the inhalation counter activating on closing the device. Mean flow at BAM firing following first inhalation was 35.0 (range 16.3-52.3) L/min; mean PIF was 64.6 (35.0-123.9) L/min. A total of 72 patients were enrolled in the COPD study, with data analysed for 69 (mean forced expiratory volume in 1 s 48.7% predicted [17-92%]). As with the asthma study, all patients, regardless of airflow limitation, were able to trigger the BAM. Mean flow at BAM firing following first inhalation was 41.9 (26.6-57.1) L/min; mean PIF was 68.0 (31.5-125.4) L/min. Device usability was rated highly in both studies, with 5 min sufficient to train the patients, and a click heard shortly after inhalation in all cases (providing feedback on BAM firing).ConclusionsInhalation flows triggering the BAM in the NEXThaler were similar between patients with controlled and partly controlled/uncontrolled asthma, and were similar across COPD airflow limitation. All enrolled patients were able to activate the device.
| S-EPMC7905605 | biostudies-literature
Project description:BackgroundTo evaluate whether patients of varying ages and lung function with asthma or those with chronic obstructive pulmonary disease (COPD) can achieve sufficient inspiratory flows for effective use of the fixed-dose combination of salmeterol-fluticasone propionate and budesonide-formoterol dispensed with the Easyhaler® (EH) device-metered, multi-dose dry powder inhaler (DPI).MethodsA pooled analysis of two randomized, multicenter, crossover, open-label studies (NCT01424137; NCT009849061) was conducted to characterize inspiratory flow parameters across the EH, Seretide Diskus (DI) and Symbicort Turbuhaler (TH) inhalers in patients with asthma and/or COPD of varying severity. The primary endpoint was peak inspiratory flow (PIF) rate through the EH.ResultsThe intent-to-treat population comprised 397 patients; 383 patients were included in the per-protocol (PP) population. The mean PIF (standard deviation) values through the EH in patients <18 and ≥18 years of age with asthma and in those with COPD, were similar: 61.4 (11.5), 69.7 (13.5), and 61.9 (13.2) L/min, respectively. These flow rates correspond to pressure drops of 5.05 (1.80), 6.52 (2.34) and 5.19 (2.07) kPa, respectively. In total, 380 (99.2%) of patients in the PP population were able to generate a PIF rate through the EH of ≥30 L/min, which is required to enable consistent dose delivery from the DPI; there was a moderate direct association between age and PIF in younger patients with asthma, but this was inverse and less apparent in adult patients with asthma and/or those with COPD. Height and weight were also moderately correlated with PIF. Stronger associations with PIF were observed for some lung function parameters, particularly native PIF and forced inspiratory vital capacity.ConclusionsOver 99% of patients with asthma and/or COPD were able to inhale through the EH with an adequate PIF rate, irrespective of age, or severity of airway obstruction. This confirms that patients with asthma and/or COPD can achieve inspiratory flows via the EH DPI that are sufficient for its effective use.
| S-EPMC7947512 | biostudies-literature
Project description:BackgroundIn patients receiving inhaled medication, dissatisfaction with and difficulty in using the inhaler can affect treatment adherence. The incidence of handling errors is typically higher in the elderly than in younger people. The aim of the study was to assess inhaler preference for and handling errors with the ELLIPTA® dry powder inhaler (DPI), (GSK), compared with the established BREEZHALER™, a single-dose capsule DPI (Novartis), in inhalation device-naïve Japanese volunteers aged ≥40 years.MethodsIn this open-label, nondrug interventional, crossover DPI preference study comparing the ELLIPTA DPI and BREEZHALER, 150 subjects were randomized to handle the ELLIPTA or BREEZHALER DPIs until the point of inhalation, without receiving verbal or demonstrative instruction (first attempt). Subjects then crossed over to the other inhaler. Preference was assessed using a self-completed questionnaire. Inhaler handling was assessed by a trained assessor using a checklist. Subjects did not inhale any medication in the study, so efficacy and safety were not measured.ResultsThe ELLIPTA DPI was preferred to the BREEZHALER by 89% of subjects (odds ratio [OR] 70.14, 95% confidence interval [CI] 33.69-146.01; P-value not applicable for this inhaler) for ease of use, by 63% of subjects (OR 2.98, CI 1.87-4.77; P<0.0001) for ease of determining the number of doses remaining in the inhaler, by 91% for number of steps required, and by 93% for time needed for handling the inhaler. The BREEZHALER was preferred to the ELLIPTA DPI for comfort of the mouthpiece by 64% of subjects (OR 3.16, CI 1.97-5.06; P<0.0001). The incidence of handling errors (first attempt) was 11% with ELLIPTA and 68% with BREEZHALER; differences in incidence were generally similar when analyzed by age (< or ≥65 years) or sex.ConclusionThese data, obtained in an inhalation device-naïve population, suggest that the ELLIPTA DPI is preferred to an established alternative based on its ease-of-use features and is associated with fewer handling errors.
| S-EPMC4267517 | biostudies-literature
Project description:Spray drying is a particle engineering technique used to manufacture respirable pharmaceutical powders that are suitable for delivery to the deep lung. It is amenable to processing both small molecules and biologic actives, including proteins. In this work, a simultaneous spray-drying process, termed simul-spray, is described; the process involves two different active pharmaceutical ingredient (API) solutions that are simultaneously atomized through separate nozzles into a single-spray dryer. Collected by a single cyclone, simul-spray produces a uniform mixture of two different active particles in a single-unit operation. While combination therapies for dry powder inhalers containing milled small molecule API are commercially approved, limited options exist for preparing combination treatments that contain both small molecule APIs and biotherapeutic molecules. Simul-spray drying is also ideal for actives which cannot withstand a milling-based particle engineering process, or which require a high dose that is incompatible with a carrier-based formulation. Three combination case studies are demonstrated here, in which bevacizumab is paired with erlotinib, cisplatin, or paclitaxel in a dry powder inhaler formulation. These model systems were chosen for their potential relevance to the local treatment of lung cancer. The resulting formulations preserved the biologic activity of the antibody, achieved target drug concentration, and had aerosol properties suitable for pulmonary delivery.
| S-EPMC9227944 | biostudies-literature
Project description:Background: Wixela Inhub is a generic version of Advair Diskus recently approved by the U.S. Food and Drug Administration. The Inhub inhaler delivers fluticasone propionate (FP)/salmeterol in a dry powder formulation. The goals of our studies were to demonstrate that the Inhub inhaler can be used by representative end users and confirm the robustness of the Inhub inhaler. Methods: Study 1: A nondosing usability assessment, the device orientation study, confirmed that intended users (represented by patients diagnosed with asthma or chronic obstructive pulmonary disease [COPD] who were naive to dry powder inhalers and current Advair Diskus users) could use the Inhub inhaler safely and effectively. Subjects were provided with an Inhub inhaler in commercial packaging, including instructions for use, and were asked to undertake three dose simulations using the inhaler. Subjects were encouraged to interact with this new drug delivery device as they would at home. Subjects were not provided with training on the use of the device. Subjects were observed interacting with the Inhub inhaler, and those who currently use Diskus were also observed interacting with the Diskus to determine whether their mental model of the use of Diskus impacted their interaction with the Inhub device, this assessment was not a primary outcome of the study. Study 2: This is an open-label clinical study to confirm the robustness of the Inhub inhaler after at home patient use. Subjects diagnosed with asthma or COPD were provided Inhub inhaler training and subsequently self-administered 3 weeks of twice daily doses of Wixela Inhub 250 μg FP/50 μg salmeterol in the home environment. The Inhub inhalers were returned to the investigator after ∼3 weeks of outpatient use for in vitro tests on the drug remaining in each inhaler. Results: Study 1 enrolled 110 subjects, and all completed the study. Most subjects (100/110) held the Inhub inhaler in the correct orientation and of those who did not, 9 still achieved a peak inhalation flow rate of ≥30 L/min and a total inhaled volume of ≥1 L, thus meeting the requirements of the study success criteria. In Study 2, 111 pediatric, adult, and elderly subjects with asthma or COPD received the study drug. After ∼3 weeks of outpatient use of the Inhub inhaler by subjects, comprehensive in vitro testing demonstrated that the FP and salmeterol pharmaceutical performance in the Inhub inhaler was preserved. Conclusions: The majority of subjects demonstrated safe and effective use of the Inhub inhaler. In vitro testing and inspections confirmed the robustness of the Inhub inhaler after outpatient use. Clinical trial registration number: NCT02474017.
| S-EPMC8060712 | biostudies-literature
Project description:This study aims at developing and characterizing the puerarin dry powder inhaler (DPI) formulations for pulmonary delivery. The inhalable particles size (<2 μm) was accomplished by micronization and its morphology was examined by scanning electron microscopy (SEM). The puerarin-excipient interaction in powder mixtures was analyzed by using Fourier transform infrared spectroscopy (FTIR), Raman confocal microscopy, X-Ray powder Diffraction (XRD), and differential scanning calorimetry (DSC) methods. Using a Twin stage impinger (TSI), the in-vitro aerosolization of the powder formulations was carried out at a flow rate of 60 L/min and the drug was quantified by employing a validated HPLC method. No significant interactions between the drug and the excipients were observed in the powder formulations. The fine particle fraction (FPF) of the drug alone was 4.2% which has increased five to six-fold for the formulations with aerosolization enhancers. Formulation containing lactose as large carriers produced 32.7% FPF, which further increased with the addition of dispersibility enhancers, leucine and magnesium stearate (40.8% and 41.2%, respectively). The Raman and FTIR techniques are very useful tool for understanding structural integrity and stability of the puerarin in the powder formulations. The puerarin was found to be compatible with the excipients used and the developed DPI formulation may be considered as an efficient formulation for pulmonary delivery for the management of various diseases at a very low dose.
| S-EPMC8043385 | biostudies-literature
Project description:Correct inhalation technique is essential for effective use of dry powder inhalers (DPIs), as their effectiveness largely depends on the patient's inhalation manoeuvre. Children are an especially challenging target population for DPI development due to the large variability in understanding and inspiratory capacities. We previously performed a study in which we determined the prerequisites for a paediatric DPI in a mostly healthy paediatric population, for which we used an empty test inhaler with variable internal airflow resistance and mouthpiece. In the current study we investigated what specifications are required for a DPI for children with cystic fibrosis (CF), for which we expanded on our previous findings. We recorded flow profiles of 35 children with CF (aged 4.7-14.7 years) at three airflow resistances (0.031-0.045 kPa0.5.min.L-1) from which various inspiratory parameters were computed. Obstructions in the mouth during inhalation were recorded with a sinuscope. All children were able to perform a correct inhalation manoeuvre, although video analysis showed that children did not place the inhaler correctly in the mouth in 17% of the cases. No effect was found of medium to high airflow resistance on total inhaled volume, which implies that the whole resistance range tested is suitable for children with CF aged 4-14 years. No effect could be established of either mouthpiece design or airflow resistance on the occurrence of obstructions in the mouth cavity. This study confirms our previous conclusion that the development of DPIs specifically for children is highly desired. Such a paediatric DPI should function well at 0.5 L inhaled volume and a peak inspiratory flow rate of 20 to 30 L/min, depending on the internal airflow resistance. This resistance can be increased up to 0.045 kPa0.5.min.L-1 (medium-high) to reduce oropharyngeal deposition. A higher resistance may be less favourable due to its compromising effect on PIF and thereby on the energy available for powder dispersion.
| S-EPMC5553717 | biostudies-literature
Project description:Age appropriateness is a major concern of pulmonary delivery devices, in particular of dry powder inhalers (DPIs), since their performance strongly depends on the inspiratory flow manoeuvre of the patient. Previous research on the use of DPIs by children focused mostly on specific DPIs or single inspiratory parameters. In this study, we investigated the requirements for a paediatric DPI more broadly using an instrumented test inhaler. Our primary aim was to assess the impact of airflow resistance on children's inspiratory flow profiles. Additionally, we investigated children's preferences for airflow resistance and mouthpiece design and how these relate to what may be most suitable for them. We tested 98 children (aged 4.7-12.6 years), of whom 91 were able to perform one or more correct inhalations through the test inhaler. We recorded flow profiles at five airflow resistances ranging from 0.025 to 0.055 kPa0.5.min.L-1 and computed various inspiratory flow parameters from these recordings. A sinuscope was used to observe any obstructions in the oral cavity during inhalation. 256 flow profiles were included for analysis. We found that both airflow resistance and the children's characteristics affect the inspiratory parameters. Our data suggest that a medium-high resistance is both suitable for and well appreciated by children aged 5-12 years. High incidences (up to 90%) of obstructions were found, which may restrict the use of DPIs by children. However, an oblong mouthpiece that was preferred the most appeared to positively affect the passageway through the oral cavity. To accommodate children from the age of 5 years onwards, a DPI should deliver a sufficiently high fine particle dose within an inhaled volume of 0.5 L and at a peak inspiratory flow rate of 25-40 L.min-1. We recommend taking these requirements into account for future paediatric inhaler development.
| S-EPMC4047113 | biostudies-other