Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Charging and discharging of single colloidal particles at oil/water interfaces.

ABSTRACT: The physical behavior of solid colloids trapped at a fluid-fluid interface remains in itself an open fundamental issue. Here, we show that the gradients of surface tension can induce particles to jet towards the oil/water interface with velocities as high as ≈ 60 mm/s when particle suspensions come in contact with the interface. We hypothesize that rubbing between the particles and oil lead to the spontaneous accumulation of negative charges on the hemisphere of those interfacial particles that contact the oil phase by means of triboelectrification. The charging process is highly dependent on the sliding distances, and gives rise to long-ranged repulsions that protect interfacial particles from coagulating at the interface by the presence of electrolyte. These triboelectric charges, however, are compensated within several hours, which affect the stability of interfacial particles. Importantly, by charging different kinds of colloidal particles using various spreading solvents and dispersion methods, we have demonstrated that charging and discharging of single colloidal particles at oil/water interfaces impacts a broad range of dynamical behavior.

SUBMITTER: Gao P

PROVIDER: S-EPMC4007091 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ultrafast desorption of colloidal particles from fluid interfaces.

Project description:The self-assembly of solid particles at fluid-fluid interfaces is widely exploited to stabilize emulsions and foams, and in materials synthesis. The self-assembly mechanism is very robust owing to the large capillary energy associated with particle adsorption, of the order of millions of times the thermal energy for micrometer-sized colloids. The microstructure of the interfacial colloid monolayer can also favor stability, for instance in the case of particle-stabilized bubbles, which can be indefinitely stable against dissolution due to jamming of the colloid monolayer. As a result, significant challenges arise when destabilization and particle removal are a requirement. Here we demonstrate ultrafast desorption of colloid monolayers from the interface of particle-stabilized bubbles. We drive the bubbles into periodic compression-expansion using ultrasound waves, causing significant deformation and microstructural changes in the particle monolayer. Using high-speed microscopy we uncover different particle expulsion scenarios depending on the mode of bubble deformation, including highly directional patterns of particle release during shape oscillations. Complete removal of colloid monolayers from bubbles is achieved in under a millisecond. Our method should find a broad range of applications, from nanoparticle recycling in sustainable processes to programmable particle delivery in lab-on-a-chip applications.

| S-EPMC4434748 | biostudies-literature

Transition Behaviors of Configurations of Colloidal Particles at a Curved Oil-Water Interface.

Project description:We studied the transition behaviors of colloidal arrangements confined at a centro-symmetrically curved oil-water interface. We found that assemblies composed of several colloidal particles at the curved interface exhibit at least two unique patterns that can be attributed to two factors: heterogeneity of single-colloid self-potential and assembly kinetics. The presence of the two assembly structures indicates that an essential energy barrier between the two structures exists and that one of the structures is kinetically stable. This energy barrier can be overcome via external stimuli (e.g., convection and an optical force), leading to dynamic transitions of the assembly patterns.

| S-EPMC5456683 | biostudies-other

Investigating water/oil interfaces with opto-thermophoresis.

Project description:Charging of interfaces between water and hydrophobic media is a mysterious feature whose nature and origin have been under debate. Here, we investigate the fundamentals of the interfacial behaviors of water by employing opto-thermophoretic tweezers to study temperature-gradient-induced perturbation of dipole arrangement at water/oil interfaces. With surfactant-free perfluoropentane-in-water emulsions as a model interface, additional polar organic solvents are introduced to systematically modify the structural aspects of the interface. Through our experimental measurements on the thermophoretic behaviors of oil droplets under a light-generated temperature gradient, in combination with theoretical analysis, we propose that water molecules and mobile negative charges are present at the water/oil interfaces with specific dipole arrangement to hydrate oil droplets, and that this arrangement is highly susceptible to the thermal perturbation due to the mobility of the negative charges. These findings suggest a potential of opto-thermophoresis in probing aqueous interfaces and could enrich understanding of the interfacial behaviors of water.

| S-EPMC9243056 | biostudies-literature

Spontaneous formation of water droplets at oil-solid interfaces.

Project description:We report observations of spontaneous formation of micrometer-sized water droplets within micrometer-thick films of a range of different oils (isotropic and nematic 4-cyano-4'-pentylbiphenyl (5CB) and silicone, olive and corn oil) that are supported on glass substrates treated with octadecyltrichlorosilane (OTS) and immersed under water. Confocal imaging was used to determine that the water droplets nucleate and grow at the interface between the oils and OTS-treated glass with a contact angle of approximately 130 degrees. A simple thermodynamic model based on macroscopic interfacial energetic arguments consistent with the contact angle of 130 degrees, however, fails to account for the spontaneous formation of the water droplets. zeta-potential measurements performed with OTS-treated glass (-59.0 +/- 16.4 mV) and hydrophobic monolayers formed on gold films (2.0 +/- 0.7 mV), when combined with the observed absence of droplet formation under films of oil supported on the latter surfaces, suggest that the charge of the oil-solid interface promotes partitioning of water to the interfacial region. The hydrophobic nature of the OTS-treated glass promotes dewetting of water accumulated in the interfacial region into droplets (a thin film of water is seen to form on bare glass). The inhibitory effect on droplet formation of both salt (NaCl) and sucrose (0.1-500 mM) added to the aqueous phase was similar, indicating that both solutes lower the chemical potential of the bulk water (osmotic effect) sufficiently to prevent partitioning of the water to the interface between the oil and supporting substrates. These results suggest that charged, hydrophobic surfaces can provide routes to spontaneous formation of surface-supported, water-in-oil emulsions.

| S-EPMC2951552 | biostudies-literature

Brownian Diffusion of Individual Janus Nanoparticles at Water/Oil Interfaces.

Project description:Janus nanoparticles could exhibit a higher interfacial activity and adsorb stronger to fluid interfaces than homogeneous nanoparticles of similar sizes. However, little is known about the interfacial diffusion of Janus nanoparticles and how it compares to that of homogeneous ones. Here, we employed fluorescence correlation spectroscopy to study the lateral diffusion of ligand-grafted Janus nanoparticles adsorbed at water/oil interfaces. We found that the diffusion was significantly slower than that of homogeneous nanoparticles. We carried out dissipative particle dynamic simulations to study the mechanism of interfacial slowdown. Good agreement between experimental and simulation results has been obtained only provided that the flexibility of ligands grafted on the nanoparticle surface was taken into account. The polymeric ligands were deformed and oriented at an interface so that the effective radius of Janus nanoparticles is larger than the nominal one obtained by measuring the diffusion in bulk solution. These findings highlight further the critical importance of the ligands grafted on Janus nanoparticles for applications involving nanoparticle adsorption at an interface, such as oil recovery or two-dimensional self-assembly.

| S-EPMC7458482 | biostudies-literature

Structure and charging of hydrophobic material/water interfaces studied by phase-sensitive sum-frequency vibrational spectroscopy.

Project description:We have studied the hydrophobic water/octadecyltrichlorosilane (OTS) interface by using the phase-sensitive sum-frequency vibrational spectroscopy (PS-SFVS), and we obtained detailed structural information of the interface at the molecular level. Excess ions emerging at the interface were detected by changes of the surface vibrational spectrum induced by the surface field created by the excess ions. Both hydronium (H(3)O(+)) and hydroxide (OH(-)) ions were found to adsorb at the interface, and so did other negative ions such as Cl(-). By varying the ion concentrations in the bulk water, their adsorption isotherms were measured. It was seen that among the three, OH(-) has the highest adsorption energy, and H(3)O(+) has the lowest; OH(-) also has the highest saturation coverage, and Cl(-) has the lowest. The result shows that even the neat water/OTS interface is not neutral, but charged with OH(-) ions. The result also explains the surprising observation that the isoelectric point appeared at approximately 3.0 when HCl was used to decrease the pH starting from neat water.

| S-EPMC2741220 | biostudies-literature

Reflectometry Reveals Accumulation of Surfactant Impurities at Bare Oil/Water Interfaces.

Project description:Bare interfaces between water and hydrophobic media like air or oil are of fundamental scientific interest and of great relevance for numerous applications. A number of observations involving water/hydrophobic interfaces have, however, eluded a consensus mechanistic interpretation so far. Recent theoretical studies ascribe these phenomena to an interfacial accumulation of charged surfactant impurities in water. In the present work, we show that identifying surfactant accumulation with X-ray reflectometry (XRR) or neutron reflectometry (NR) is challenging under conventional contrast configurations because interfacial surfactant layers are then hardly visible. On the other hand, both XRR and NR become more sensitive to surfactant accumulation when a suitable scattering length contrast is generated by using fluorinated oil. With this approach, significant interfacial accumulation of surfactant impurities at the bare oil/water interface is observed in experiments involving standard cleaning procedures. These results suggest that surfactant impurities may be a limiting factor for the investigation of fundamental phenomena involving water/hydrophobic interfaces.

| S-EPMC6891303 | biostudies-literature

Isolating Influenza RNA from Clinical Samples Using Microfluidic Oil-Water Interfaces.

Project description:The effective and robust separation of biomolecules of interest from patient samples is an essential step in diagnostic applications. We present a platform for the fast extraction of nucleic acids from clinical specimens utilizing paramagnetic PMPs, an oil-water interface, a small permanent magnet and a microfluidic channel to separate and purify captured nucleic acids from lysate in less than one minute, circumventing the need for multiple washing steps and greatly simplifying and expediting the purification procedure. Our device was able to isolate influenza RNA from clinical nasopharyngeal swab samples with high efficiency when compared to the Ambion® MagMAXTM Viral RNA Isolation Kit, sufficiently separating nucleic acid analytes from PCR-inhibiting contaminants within the lysate while also critically maintaining high integrity of the viral genome. We find that this design has great potential for rapid, efficient and sensitive nucleic acid separation from patient sample.

| S-EPMC4757531 | biostudies-literature

Flow coupling between active and passive fluids across water-oil interfaces.

Project description:Active fluid droplets surrounded by oil can spontaneously develop circulatory flows. However, the dynamics of the surrounding oil and their influence on the active fluid remain poorly understood. To investigate interactions between the active fluid and the passive oil across their interface, kinesin-driven microtubule-based active fluid droplets were immersed in oil and compressed into a cylinder-like shape. The droplet geometry supported intradroplet circulatory flows, but the circulation was suppressed when the thickness of the oil layer surrounding the droplet decreased. Experiments with tracers and network structure analyses and continuum models based on the dynamics of self-elongating rods demonstrated that the flow transition resulted from flow coupling across the interface between active fluid and oil, with a millimeter-scale coupling length. In addition, two novel millifluidic devices were developed that could trigger and suppress intradroplet circulatory flows in real time: one by changing the thickness of the surrounding oil layer and the other by locally deforming the droplet. This work highlights the role of interfacial dynamics in the active fluid droplet system and shows that circulatory flows within droplets can be affected by millimeter-scale flow coupling across the interface between the active fluid and the oil.

| S-EPMC8263611 | biostudies-literature

Adsorption of Polar Species at Crude Oil-Water Interfaces: the Chemoelastic Behavior.

Project description:We investigate the formation and properties of crude oil/water interfacial films. The time evolution of interfacial tension suggests the presence of short and long timescale processes reflecting the competition between different populations of surface-active molecules. We measure both the time-dependent shear and extensional interfacial rheology moduli. Late-time interface rheology is dominated by elasticity, which results in visible wrinkles on the crude oil drop surface upon interface disturbance. We also find that the chemical composition of the interfacial films is affected by the composition of the aqueous phase that it has contacted. For example, sulfate ions promote films enriched with carboxylic groups and condensed aromatics. Finally, we perform solution exchange experiments and monitor the late-time film composition upon the exchange. We detect the film composition change upon replacing chloride solutions with sulfate-enriched ones. To the best of our knowledge, we are the first to report the composition alteration of aged crude oil films. This finding might foreshadow an essential crude oil recovery mechanism.

| S-EPMC9161445 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data