Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Interfacial nanodroplets guided construction of hierarchical Au, Au-Pt, and Au-Pd particles as excellent catalysts.

ABSTRACT: Interfacial nanodroplets were grafted to the surfaces of self-sacrificed template particles in a galvanic reaction system to assist the construction of 3D Au porous structures. The interfacial nanodroplets were formed via direct adsorption of surfactant-free emulsions onto the particle surfaces. The interfacial nanodroplets discretely distributed at the template particle surfaces and served as soft templates to guide the formation of porous Au structures. The self-variation of footprint sizes of interfacial nanodroplets during Au growth gave rise to a hierarchical pore size distribution of the obtained Au porous particles. This strategy could be easily extended to synthesize bimetal porous particles such as Au-Pt and Au-Pd. The obtained porous Au, Au-Pt, and Au-Pd particles showed excellent catalytic activity in catalytic reduction of 4-nitrophenol.

SUBMITTER: Ma A

PROVIDER: S-EPMC4010925 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Oxidation of Dichloromethane over Au, Pt, and Pt-Au Containing Catalysts Supported on ?-Al2O3 and CeO2-Al2O3.

Project description:Au, Pt, and Pt-Au catalysts supported on Al2O3 and CeO2-Al2O3 were studied in the oxidation of dichloromethane (DCM, CH2Cl2). High DCM oxidation activities and HCl selectivities were seen with all the catalysts. With the addition of Au, remarkably lower light-off temperatures were observed as they were reduced by 70 and 85 degrees with the Al2O3-supported and by 35 and 40 degrees with the CeO2-Al2O3-supported catalysts. Excellent HCl selectivities close to 100% were achieved with the Au/Al2O3 and Pt-Au/Al2O3 catalysts. The addition of ceria on alumina decreased the total acidity of these catalysts, resulting in lower performance. The 100-h stability test showed that the Pt-Au/Al2O3 catalyst was active and durable, but the selectivity towards the total oxidation products needs improvement. The results suggest that, with the Au-containing Al2O3-supported catalysts, DCM decomposition mainly occurs via direct DCM hydrolysis into formaldehyde and HCl followed by the oxidation of formaldehyde into CO and CO2.

| S-EPMC7587384 | biostudies-literature

Strong Fe3+-O(H)-Pt Interfacial Interaction Induced Excellent Stability of Pt/NiFe-LDH/rGO Electrocatalysts.

Project description:Agglomeration-triggered deactivation of supported platinum electrocatalysts markedly hinders their application in methanol oxidation reaction (MOR). In this study, graphene-supported nickel-iron layered double hydroxide (NiFe-LDH/rGO), in which Fe3+ was introduced to replace Ni2+ partially in the Ni(OH)2 lattice to provide stronger metal-support bonding sites, was utilized to immobilize Pt nanoparticles (NPs). Given the optimized metal-support interfacial contact (Fe3+-O(H)-Pt) between Pt NPs and NiFe-LDH/rGO nanosheets for Pt/NiFe-LDH/rGO electrocatalysts, the Pt/NiFe-LDH/rGO electrocatalysts displayed dramatically enhanced durability than that of Pt/Ni(OH)2/rGO counterpart as well as commercial Pt/C, and 86.5% of its initial catalytic activity can be maintained even after 1200 cycles of cyclic voltammetry (CV) tests during MOR. First-principle calculations toward the resultant M-O(H)-Pt (M = Fe3+, Ni2+) interfacial structure further corroborates that the NiFe-LDH nanosheets can provide stronger bonding sites (via the Fe3+-O(H)-Pt bonds) to immobilize Pt NPs than those of Ni(OH)2 nanosheets (via the Ni2+-O(H)-Pt bonds).

| S-EPMC5778055 | biostudies-literature

New atomically precise <b>M1Ag21</b> (M = Au/Ag) nanoclusters as excellent oxygen reduction reaction catalysts.

Project description:By introducing 1,1'-bis-(diphenylphosphino)ferrocene (dppf) as an activating ligand, two novel nanoclusters, M1Ag21 (M = Au/Ag), have been controllably synthesized and structurally characterized. The atomically precise structures of the M1Ag21 nanoclusters were determined by SCXC and further confirmed by ESI-TOF-MS, TGA, XPS, DPV, and FT-IR measurements. The M1Ag21 nanoclusters supported on activated carbon (C) are exploited as efficient oxygen reduction reaction (ORR) catalysts in alkaline solutions. Density functional theory (DFT) calculations verify that the catalytic activities of the two cluster-based systems originate from the significant ensemble synergy effect between the M13 kernel and dppf ligand in M1Ag21. This work sheds lights on the preparation of cluster-based electrocatalysts and other catalysts that are activated and modified by peripheral ligands.

| S-EPMC8179487 | biostudies-literature

Low Metal Loading (Au, Ag, Pt, Pd) Photo-Catalysts Supported on TiO2 for Renewable Processes.

Project description:Photo-catalysts based on titanium dioxide, and modified with highly dispersed metallic nanoparticles of Au, Ag, Pd and Pt, either mono- or bi-metallic, have been analyzed by multiple characterization techniques, including XRD, XPS, SEM, EDX, UV-Vis and N2 adsorption/desorption. Mono-metallic photo-catalysts were prepared by wet impregnation, while bi-metallic photocatalysts were obtained via deposition-precipitation (DP). The relationship between the physico-chemical properties and the catalyst's behavior for various photo-synthetic processes, such as carbon dioxide photo-reduction to liquid products and glucose photo-reforming to hydrogen have been investigated. Among the tested materials, the catalysts containing platinum alone (i.e., 0.1 mol% Pt/TiO2) or bi-metallic gold-containing materials (e.g., 1 wt% (AuxAgy)/TiO2 and 1 wt% (AuxPtz)/TiO2) showed the highest activity, presenting the best results in terms of productivity and conversion for both applications. The textural, structural and morphological properties of the different samples being very similar, the main parameters to improve performance were function of the metal as electron sink, together with optoelectronic properties. The high activity in both applications was related to the low band gap, that allows harvesting more energy from a polychromatic light source with respect to the bare TiO2. Overall, high selectivity and productivity were achieved with respect to most literature data.

| S-EPMC9031976 | biostudies-literature

Direct Growth of a Polypyrrole Aerogel on Hollow CuS Hierarchical Microspheres Yields Particles with Excellent Electromagnetic Wave Properties.

Project description:A current hot topic in polymer science is the development of electromagnetic wave-absorbing materials with desired properties (i.e., proper impedance matching and strong attenuation capability), but it presents a considerable challenge. In this work, solvothermal, and self-assembled polymerization were employed for the controlled fabrication of a uniform polypyrrole (PPy) aerogel coated on hollow CuS hierarchical microspheres (CuS@PPy). The PPy coating thickness of the heterostructure could be tuned by varying the feeding weight ratios of CuS/pyrrole monomer. The electromagnetic wave absorption properties of the CuS@PPy composites were estimated to be in the frequency range 2?18 GHz. The as-prepared Sample B (fabricated by the addition of 35 mg CuS) showed a maximum reflection loss (RL) of -52.85 dB at a thickness of 2.5 mm. Moreover, an ultra-wide effective bandwidth (RL ? -10 dB) from 9.78 to 17.80 GHz (8.02 GHz) was achieved. Analysis of the electromagnetic properties demonstrated that the CuS@PPy had a remarkable enhancement compared to pure CuS platelet-based spheres and pure PPy, which can be attributed to the increased relatively complex permittivity and the promoted dielectric loss by the intense interfacial dielectric polarizations. We believe that the as-fabricated CuS@PPy can be a good reference for the fabrication of lightweight and optimal broadband absorbers.

| S-EPMC6401766 | biostudies-literature

Shell-Isolated Au Nanoparticles Functionalized with Rhodamine B Fluorophores in Helium Nanodroplets.

Project description:Nanoparticles consisting of three different materials in a layered core@shell@shell structure are synthesized in cold helium droplets by sequential doping. Upon the formation of Au core particles, a first shell layer is formed by adding either Ar, isopropyl alcohol, or hexane. Subsequently, the droplets are doped with rhodamine B (RB) molecules; fluorescence spectra recorded upon laser excitation at 532 nm provide insight into the structure of the formed complexes. For the two-component Au@RB system, the RB fluorescence is quenched in the presence of the Au core. If an intermediate isolating shell layer is introduced (Au@shell@RB), the fluorescence increases again. The results demonstrate that shell-isolated nanoparticles can be formed inside He nanodroplets and functionalized in situ with additional molecules. As the structure of the particles depends on the pickup sequence, the approach can be exploited for the synthesis and investigation of a large variety of different combinations of plasmonic metals, intermediate layers, and molecules.

| S-EPMC7812593 | biostudies-literature

The loading effect of Pt clusters on Pt/graphene nano sheets catalysts.

Project description:In this paper, we report about chemically interaction between Pt Subnano-Clusters on Graphene Nano Sheets (GNS). The aim of this research is to clarify the size effect of Pt clusters on Pt 1-7 wt.%/GNS. This research is an experimental laboratory research. GNS was synthesized by using modified Hummer's method and 1-7 wt.% Pt/GNS were prepared with impregnation method. Then, they were analyzed with TG/DTA, XRD, TEM and XPS, respectively. The results show that Pt clusters are well deposited on GNS (TG/DTA and TEM data). Those data also are consistent with XRD data. The weak and broad peaks appear at 2??=?39°, indicating Pt metal exists on GNS. The state of Pt is confirmed by using XPS. The appearance of Pt 4f. peaks proves that Pt metal is chemical interaction on GNS. The size of Pt clusters may affect the chemically properties of Pt/GNS catalysts.

| S-EPMC7844224 | biostudies-literature

Construction of Cu-Ce/graphene catalysts <i>via</i> a one-step hydrothermal method and their excellent CO catalytic oxidation performance.

Project description:Cu-Ce/graphene catalysts show high dispersion of metal particles and excellent activity and stability for catalytic oxidation. In this study, a hydrothermal method was used to synthesize a series of bimetallic Cu-Ce/graphene catalysts, and the effects of the proportions of Cu and Ce on CO oxidation were investigated in detail. Indispensable characterizations such as XPS, XRD, TEM, BET, and H2-TPR were conducted to explore the effect of the Cu/Ce molar ratio and the metal valence on the activity and determine the structure-performance relationship. The results showed that bimetallic supported catalysts, such as 3Cu5Ce/graphene, 1Cu1Ce/graphene, and 5Cu3Ce/graphene, possessed significant catalytic activity. Especially, the 5Cu3Ce/graphene catalyst showed highest catalytic activity for CO oxidation, the T 100 value was 132 °C, and the apparent activation energy was 68.03 kJ mol-1. Furthermore, the stability of the 5Cu3Ce/graphene catalyst was outstanding, which could be maintained for at least 12 h. Moreover, the CeO2 particles were well crystalline with the size 5-9 nm in these catalysts, and the CuO nanoparticles were well dispersed on CeO2 and graphene. Notably, the ratio of Cu/Ce in the catalyst was higher, the interaction between the Ce species and the graphene was stronger, and the Cu species were more easily reduced; this was beneficial for the oxidation of CO.

| S-EPMC9077102 | biostudies-literature

HPC: Hierarchical phylogeny construction.

Project description:Rapid improvements in DNA sequencing technology have resulted in long genome sequences for a large number of similar isolates with a wide range of single nucleotide polymorphism (SNP) rates, where some isolates can have thousands of times lower SNP rates than others. Genome sequences of this kind are a challenge to existing methods for construction of phylogenetic trees. We address the issues by developing a hierarchical approach to phylogeny construction. In this method, the construction is performed at multiple levels, where at each level, groups of isolates with similar levels of similarity are identified and their phylogenetic trees are constructed. Time savings are achieved by using a sufficiently large number of columns from the input alignment, instead of all its columns. Our results show that the new approach is 20-60 times more efficient than existing programs and more accurate in situations where highly similar isolates have a wide range of SNP rates.

| S-EPMC6705828 | biostudies-literature

Chiral squaramide derivatives are excellent hydrogen bond donor catalysts.

Project description:Thioureas represent the dominant platform for hydrogen bond promoted asymmetric catalysts. A large number of reactions, reported in scores of publications, have been successfully promoted by chiral thioureas. The present paper reports the use of squaramides as a highly effective new scaffold for the development of chiral hydrogen bond donor catalysts. Squaramide catalysts are very simple to prepare. The (-)-cinchonine modified squaramide (5), easily prepared through a two-step process from methyl squarate, was shown to be an effective catalyst, even at catalyst loadings as low as 0.1 mol%, for the conjugate addition reactions of 1,3-dicarbonyl compounds to beta-nitrostyrenes. The addition products were obtained in high yields and excellent enantioselectivities.

| S-EPMC2701638 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data