Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Affinity separation of lectins using porous membranes immobilized with glycopolymer brushes containing mannose or N-acetyl-d-glucosamine.

ABSTRACT: Porous membranes with glycopolymer brushes were prepared as biomaterials for affinity separation. Glycopolymer brushes contained acrylic acid and D-mannose or N-acetyl-D-glucosamine, and were formed on substrates by surface-initiated atom transfer radical polymerization. The presence of glycopolymer brush was confirmed by X-ray photoelectron spectroscopy, contact angle, and ellipsometry measurements. The interaction between lectin and the glycopolymer immobilized on glass slides was confirmed using fluorescent-labeled proteins. Glycopolymer-immobilized surfaces exhibited specific adsorption of the corresponding lectin, compared with bovine serum albumin. Lectins were continuously rejected by the glycopolymer-immobilized membranes. When the protein solution was permeated through the glycopolymer-immobilized membrane, bovine serum albumin was not adsorbed on the membrane surface. In contrast, concanavalin A and wheat germ agglutinin were rejected by membranes incorporating D-mannose or N-acetyl-D-glucosamine, respectively. The amounts of adsorbed concanavalin A and wheat germ agglutinin was increased five- and two-fold that of adsorbed bovine serum albumin, respectively.

SUBMITTER: Ogata Y

PROVIDER: S-EPMC4021937 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Maize root lectins mediate the interaction with Herbaspirillum seropedicae via N-acetyl glucosamine residues of lipopolysaccharides.

Project description:Herbaspirillum seropedicae is a plant growth-promoting diazotrophic betaproteobacterium which associates with important crops, such as maize, wheat, rice and sugar-cane. We have previously reported that intact lipopolysaccharide (LPS) is required for H. seropedicae attachment and endophytic colonization of maize roots. In this study, we present evidence that the LPS biosynthesis gene waaL (codes for the O-antigen ligase) is induced during rhizosphere colonization by H. seropedicae. Furthermore a waaL mutant strain lacking the O-antigen portion of the LPS is severely impaired in colonization. Since N-acetyl glucosamine inhibits H. seropedicae attachment to maize roots, lectin-like proteins from maize roots (MRLs) were isolated and mass spectrometry (MS) analysis showed that MRL-1 and MRL-2 correspond to maize proteins with a jacalin-like lectin domain, while MRL-3 contains a B-chain lectin domain. These proteins showed agglutination activity against wild type H. seropedicae, but failed to agglutinate the waaL mutant strain. The agglutination reaction was severely diminished in the presence of N-acetyl glucosamine. Moreover addition of the MRL proteins as competitors in H. seropedicae attachment assays decreased 80-fold the adhesion of the wild type to maize roots. The results suggest that N-acetyl glucosamine residues of the LPS O-antigen bind to maize root lectins, an essential step for efficient bacterial attachment and colonization.

| S-EPMC3793968 | biostudies-literature

Infused-liquid-switchable porous nanofibrous membranes for multiphase liquid separation.

Project description:Materials with selective wettabilities are widely used for effective liquid separation in environmental protection and the chemical industry. Current liquid separation strategies are primarily based on covalent modification to control the membranes' surface energy, or are based on gating mechanisms to accurately tune the gating threshold of the transport substance. Herein, we demonstrate a simple and universal polarity-based protocol to regulate the wetting behavior of superamphiphilic porous nanofibrous membranes by infusing a high polar component of surface energy liquid into the membranes, forming a relatively stable liquid-infusion-interface to repel the immiscible low polar component of surface energy liquid. Even immiscible liquids with a surface energy difference as small as 2?mJ?m-2, or emulsions stabilized by emulsifiers can be effectively separated. Furthermore, the infused liquid can be substituted by another immiscible liquid with a higher polar component of surface energy, affording successive separation of multiphase liquids.Separating immiscible liquids with small surface energy differences remains a challenge. Here, the authors develop a polarity-based strategy for the separation of multiphase mixtures of immiscible liquids, even those with surface energy differences as small as 2?mJ?m-2.

| S-EPMC5603539 | biostudies-literature

Porous nanocomposites with integrated internal domains: application to separation membranes.

Project description:Asymmetric membranes with layered structure have made significant achievements due to their balanced properties and multi-functionalities that come from a combination of multiple layers. However, issues such as delamination and substructure resistance are generated by the intrinsic layered structure. Here, we present a strategy to integrate the traditional layered structure into an asymmetric but continuous porous network. Through infiltrations of microparticles and nanoparticles to targeted regions, active domains are created inside the porous scaffold versus having them applied externally. The fabricated internal active domains are highly adjustable in terms of its dimensions, pore size, and materials. We demonstrate that it is a general method that can be applicable to a wide variety of particles regardless of their material, dimensions, or geometry. By eliminating the external layered structure, problems such as those mentioned above can be eliminated. This integration technique can be extended to other devices required a layered structure, such as solid oxide fuel cells and lithium ion battery.

| S-EPMC3960582 | biostudies-literature

Glycopolymer-Wrapped Carbon Nanotubes Show Distinct Interaction of Carbohydrates With Lectins.

Project description:Glyconanomaterials with unique nanoscale property and carbohydrate functionality show vast potential in biological and biomedical applications. We investigated the interactions of noncovalent complexes of single-wall carbon nanotubes that are wrapped by disaccharide lactose-containing glycopolymers with the specific carbohydrate-binding proteins. The terminal galactose (Gal) of glycopolymers binds to the specific lectin as expected. Interestingly, an increased aggregation of nanotubes was also observed when interacting with a glucose (Glc) specific lectin, likely due to the removal of Glc groups from the surface of nanotubes resulting from the potential binding of the lectin to the Glc in the glycopolymers. This result indicates that the wrapping conformation of glycopolymers on the surface of nanotubes potentially allows improved accessibility of the Glc for specific lectins. Furthermore, it shows that the interaction between Glc groups in the glycopolymers and nanotubes play a key role in stabilizing the nanocomplexes. Overall, our results demonstrate that nanostructures can enable conformation-dependent interactions of glycopolymers and proteins and can potentially lead to the creation of versatile optical sensors for detecting carbohydrate-protein interactions with enhanced specificity and sensitivity.

| S-EPMC8927622 | biostudies-literature

High-performance separation of nanoparticles with ultrathin porous nanocrystalline silicon membranes.

Project description:Porous nanocrystalline silicon (pnc-Si) is a 15 nm thin free-standing membrane material with applications in small-scale separations, biosensors, cell culture, and lab-on-a-chip devices. Pnc-Si has already been shown to exhibit high permeability to diffusing species and selectivity based on molecular size or charge. In this report, we characterize properties of pnc-Si in pressurized flows. We compare results to long-standing theories for transport through short pores using actual pore distributions obtained directly from electron micrographs. The measured water permeability is in agreement with theory over a wide range of pore sizes and porosities and orders of magnitude higher than those exhibited by commercial ultrafiltration and experimental carbon nanotube membranes. We also show that pnc-Si membranes can be used in dead-end filtration to fractionate gold nanoparticles and protein size ladders with better than 5 nm resolution, insignificant sample loss, and little dilution of the filtrate. These performance characteristics, combined with scalable manufacturing, make pnc-Si filtration a straightforward solution to many nanoparticle and biological separation problems.

| S-EPMC3311995 | biostudies-literature

Porous hydrogen-bonded organic framework membranes for high-performance molecular separation.

Project description:Hydrogen-bonded organic frameworks (HOFs) with intrinsic, tunable, and uniform pores are promising candidates to act as membranes for molecular separation, but they are yet to be explored in this field. Herein, a type of HOF membrane based on a thin-film nanocomposite (TFN) membrane containing porous HOF (PFC-1) nanoparticles was successfully fabricated via a facile interfacial polymerization method. The homogeneously distributed HOF nanoparticles can provide direct channels in the polyamide (PA) active layer for molecule separation. Due to the ultrathin nature of the TFN membrane and the highly ordered porous structure of the PFC-1 nanoparticles, these flexible HOF membranes exhibit both ultrahigh water permeability (∼546.09 L m-2 h-1 bar-1) and the excellent rejection of dye molecules (e.g., rhodamine B rejection of >97.0%). Furthermore, long-term operational stability (>50 min) and satisfactory cycling performance (>5 cycles) have also been achieved. This study may shed light on the fabrication of HOF membranes for liquid-phase molecular separation.

| S-EPMC9419181 | biostudies-literature

Synthesis of porous polymer/tissue paper hybrid membranes for switchable oil/water separation.

Project description:The unusually broad physical and chemical property window of ionic liquids allows for a wide range of applications, which gives rise to the recent spring-up of ionic liquid-based functional materials. Via solvothermal copolymerization of a monomeric ionic liquid and divinylbenzene in the presence of a tissue paper in autoclave, we fabricated a flexible porous polymer/paper hybrid membrane. The surface areas of the hybrid membranes depend on the weight fraction of the copolymer impregnated inside the tissue paper. The as-prepared hybrid membrane shows controlled surface wettability in terms of ethanol wetting and ethanol removal by harsh drying condition. This unique property provides the hybrid membrane with switchable oil/water separation function, thus of practical values for real life application.

| S-EPMC5465062 | biostudies-literature

Biodegradation Pattern of Glycopolymer Based on D-Mannose Oligomer and Hydroxypropyl Acrylate.

Project description:Glycopolymers are polymers with sugar moieties which display biodegradable and/or biocompatible character. They have emerged as an environmentally-friendly solution to classical synthetic polymers and have attracted significant research interest in the past years. Herein, we present the synthesis of a D-mannose based glycopolymer with biodegradable features. The glycopolymer was synthesized by radical copolymerization between a D-mannose oligomer bearing polymerizable double bonds and 2-hydroxypropyl acrylate, in a weight ratio of 1:2. The copolymerization kinetics was investigated by differential scanning calorimetry (DSC) and the activation energy of the process was comparatively assessed by Kissinger-Akahira-Sunose and Flynn-Wall-Ozawa methods. The obtained glycopolymer displayed good thermal behavior, fact proven by thermogravimetrical (TG) analysis and it was submitted to biodegradation inside a bioreactor fed with water from the Bega River as the source of microbial inoculum. The glycopolymer sample degraded by approximately 60% in just 23 days. The biodegradation pattern of the glycopolymer was successfully fitted against a modified sigmoidal exponential function. The kinetic model coefficients and its accuracy were calculated using Matlab and the correlation coefficient is more than promising. The changes inside glycopolymer structure after biodegradation were studied using TG and FTIR analyses, which revealed that the sugar moiety is firstly attacked by the microbial consortia as nutrient source for proliferation.

| S-EPMC7183276 | biostudies-literature

P-Type Lectins: Cation-Dependent Mannose-6-Phosphate Receptor

Project description:In eukaryotic cells, post-translational modification of secreted proteins and intracellular protein transport between organelles are ubiquitous features. One of the most studied systems is the N-linked glycosylation pathway in the synthesis of secreted glycoproteins (Schrag et al. 2003). The N-linked glycoproteins are subjected to diverse modifications and are transported through ER and Golgi apparatus to their final destinations in- and outside the cell. Incorporation of cargo glycoproteins into transport vesicles is mediated by transmembrane cargo receptors, which have been identified as intracellular lectins. For example, mannose 6-phosphate receptors (Ghosh et al. 2003) function as a cargo receptor for lysosomal proteins in the trans-Golgi network, whereas ERGIC-53 (Zhang et al. 2003) and its yeast orthologs Emp46/47p (Sato and Nakano 2002) are transport lectins for glycoproteins that are transported out of ER.

| S-EPMC7121444 | biostudies-literature

Carbon Molecular Sieve Membranes Comprising Graphene Oxides and Porous Carbon for CO2/N2 Separation.

Project description:To improve the CO2/N2 separation performance, mixed-matrix carbon molecular sieve membranes (mixed-matrix CMSMs) were fabricated and tested. Two carbon-based fillers, graphene oxide (GO) and activated carbon (YP-50F), were separately incorporated into two polymer precursors (Matrimid® 5218 and ODPA-TMPDA), and the resulting CMSMs demonstrated improved CO2 permeability. The improvement afforded by YP-50F was more substantial due to its higher accessible surface area. Based on the gas permeation data and the Robeson plot for CO2/N2 separation, the performances of the CMSMs containing 15 wt % YP-50F and 15 wt % GO in the mixed polymer matrix surpassed the 2008 Robeson upper bound of polymeric membranes. Hence, this study demonstrates the feasibility of such membranes in improving the CO2/N2 separation performance through the appropriate choice of carbon-based filler materials in polymer matrices.

| S-EPMC8069981 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data