Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

All-printable band-edge modulated ZnO nanowire photodetectors with ultra-high detectivity.

ABSTRACT: High-performance photodetectors are critical for high-speed optical communication and environmental sensing, and flexible photodetectors can be used for a wide range of portable or wearable applications. Here we demonstrate the all-printable fabrication of polycrystalline nanowire-based high-performance photodetectors on flexible substrates. Systematic investigations have shown their ultra-high photoconductive gain, responsivity and detectivity up to 3.3 × 10(17) Jones. Further analysis shows that their high performance originates from the unique band-edge modulation along the nanowire axial direction, where the existence of Schottky barriers in series leads to highly suppressed dark current of the device and also gives rise to fast photoelectric response to low-intensity optical signal owing to barrier height modulation. The discovered rationale in this work can be utilized as guideline to design high-performance photodetectors with other nanomaterial systems. The developed fabrication scheme opens up possibility for future flexible and high-performance integrated optoelectronic sensor circuitry.

SUBMITTER: Liu X

PROVIDER: S-EPMC4059920 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Long-Term Stable Organic Photodetectors with Ultra Low Dark Currents for High Detectivity Applications.

Project description:Printed organic photodetectors can transform plastic, paper or glass into smart surfaces. This innovative technology is now growing exponentially due to the strong demand in human-machine interfaces. To date, only niche markets are targeted since organic sensors still present reduced performances in comparison with their inorganic counterparts. Here we demonstrate that it is possible to engineer a state-of-the-art organic photodetector approaching the performances of Si-based photodiodes in terms of dark current, responsivity and detectivity. Only three solution-processed layers and two low-temperature annealing steps are needed to achieve the performance that is significantly better than most of the organic photodetectors reported so far. We also perform a long-term ageing study. Lifetimes of over 14,000?hours under continuous operation are more than promising and demonstrate that organic photodetectors can reach a competitive level of stability for successful commercialization of this new and promising technology.

| S-EPMC5177896 | biostudies-other

Room temperature high-detectivity mid-infrared photodetectors based on black arsenic phosphorus.

Project description:The mid-infrared (MIR) spectral range, pertaining to important applications, such as molecular "fingerprint" imaging, remote sensing, free space telecommunication, and optical radar, is of particular scientific interest and technological importance. However, state-of-the-art materials for MIR detection are limited by intrinsic noise and inconvenient fabrication processes, resulting in high-cost photodetectors requiring cryogenic operation. We report black arsenic phosphorus-based long-wavelength IR photodetectors, with room temperature operation up to 8.2 ?m, entering the second MIR atmospheric transmission window. Combined with a van der Waals heterojunction, room temperature-specific detectivity higher than 4.9 × 109 Jones was obtained in the 3- to 5-?m range. The photodetector works in a zero-bias photovoltaic mode, enabling fast photoresponse and low dark noise. Our van der Waals heterojunction photodetectors not only exemplify black arsenic phosphorus as a promising candidate for MIR optoelectronic applications but also pave the way for a general strategy to suppress 1/f noise in photonic devices.

| S-EPMC5493419 | biostudies-literature

Room-Temperature High-Detectivity Flexible Near-Infrared Photodetectors with Chalcogenide Silver Telluride Nanoparticles.

Project description:Herein, flexible near-infrared (NIR) photodetectors were prepared using silver telluride (Ag5Te3) nanoparticles (NPs) for optoelectronic applications. For the main channel materials of the photodetectors, Ag5Te3 NPs were used, which were synthesized in an aqueous solution. Moreover, Ag5Te3 thin films were successfully fabricated on plastic substrates at 150 °C using redistributed Ag5Te3 NPs in aqueous inks. The crystal structure, chemistry, and optoelectronic properties of the synthesized photodetectors were studied. The fabricated flexible Ag5Te3-based photodetectors achieved a detectivity of 6.27 × 109 cm Hz1/2 W-1 (>109) at room temperature under ∼0.35% compressive and tensile strains. The obtained detectivity value exceeds those of two-dimensional inorganic layered material phototransistors-such as MoS2-or commercial thermistor bolometers at room temperature (∼109). Furthermore, the proposed novel method for the synthesis of Ag5Te3 thin films on plastic substrates can be applied to other Ag5Te3-based applications in the future.

| S-EPMC8973059 | biostudies-literature

Photomultiplication-Type Organic Photodetectors for Near-Infrared Sensing with High and Bias-Independent Specific Detectivity.

Project description:Highly responsive organic photodetectors allow a plethora of applications in fields like imaging, health, security monitoring, etc. Photomultiplication-type organic photodetectors (PM-OPDs) are a desirable option due to their internal amplification mechanism. However, for such devices, significant gain and low dark currents are often mutually excluded since large operation voltages often induce high shot noise. Here, a fully vacuum-processed PM-OPD is demonstrated using trap-assisted electron injection in BDP-OMe:C60 material system. By applying only -1 V, compared with the self-powered working condition, the responsivity is increased by one order of magnitude, resulting in an outstanding specific detectivity of ≈1013 Jones. Remarkably, the superior detectivity in the near-infrared region is stable and almost voltage-independent up to -10 V. Compared with two photovoltaic-type photodetectors, these PM-OPDs exhibit the great potential to be easily integrated with state-of-the-art readout electronics in terms of their high responsivity, fast response speed, and bias-independent specific detectivity. The employed vacuum fabrication process and the easy-to-adapt PM-OPD concept enable seamless upscaling of production, paving the way to a commercially relevant photodetector technology.

| S-EPMC8895121 | biostudies-literature

Additive Modulated Perovskite Microstructures for High Performance Photodetectors.

Project description:Organic-inorganic hybrid perovskites have been widely used as light sensitive components for high-efficient photodetectors due to their superior optoelectronic properties. However, the unwanted crystallographic defects of perovskites typically result in high dark current, and thus limit the performance of the device. Herein, we introduce a simple route of microstructures control in MAPbI3 perovskites that associates with introducing an additive of 3,3,4,4-benzophenonetetracarboxylic dianhydridean (BPTCD) for crystallization adjustment of the perovskite film. The BPTCD additive can facilitate the formation of high-quality perovskite film with a compact and nearly pinhole-free morphology. Through characterizing the molecular interactions, it was found that the carbonyl groups in BPTCD is the key reason that promoted the nucleation and crystallization of MAPbI3. As a result, we obtained high-efficient and stable perovskite photodetectors with low dark current of 9.98 × 10-8 A at -0.5 V, an on/off ratio value of 103, and a high detectivity exceeding 1012 Jones over the visible region.

| S-EPMC7763584 | biostudies-literature

ZnO thin film-nanowire array homo-structures with tunable photoluminescence and optical band gap.

Project description:The growth and optical behavior of ZnO thin film-nanowire array homo-structures is reported. The ZnO films are deposited on glass substrates by thermal evaporation and subjected to heat treatment at 400 °C for 2 h to achieve crystallinity and stoichiometry. The surface comprises spherical grains or elongated flakes depending on thickness of films. These films are introduced in to a hydrothermal reactor in a medium of zinc acetate and HMTA to realize the nanostructures. The process results in the formation of ZnO nanowires with dimensions that are strongly dependent on the surface microstructure of the ZnO films. The role of temperature (90-180 °C) and duration (10 min to 10 h) of hydrothermal processing is investigated in detail. It is demonstrated that low temperature and short duration are ideal for producing nanowires with diameter < 100 nm, while longer durations and higher temperatures lead to large diameter and long length nanowires. Interestingly, all wires converge to a hexagonal shape with increase in duration or temperature. The lowest diameter of the vertically aligned nanowires is 50 nm and length upto 10 μm is achieved. Optical band gap of the homo-structures is of the order of 3.4-3.5 eV. Raman and photoluminescence spectra indicate the presence of defects in the films. The thin films exhibit a strong defect related photoluminescence peak centred around 550 nm. The nanowires grown on the films display both the UV-near band edge peak as well as the defect related peak. However, the intensity of the defect peak decreases with increase in length of the nanowires indicating that the photoluminescence of the homo-structures can be tuned by changing the surface microstructure of the films and also the aspect ratio of the nanowires.

| S-EPMC9059165 | biostudies-literature

Ferroelectric Tuning of ZnO Ultraviolet Photodetectors.

Project description:The ferroelectric field effect transistor (Fe-FET) is considered to be one of the most important low-power and high-performance devices. It is promising to combine a ferroelectric field effect with a photodetector to improve the photodetection performance. This study proposes a strategy for ZnO ultraviolet (UV) photodetectors regulated by a ferroelectric gate. The ZnO nanowire (NW) UV photodetector was tuned by a 2D CuInP2S6 (CIPS) ferroelectric gate, which decreased the dark current and enhanced the responsivity and detectivity to 2.40 × 104 A/W and 7.17 × 1011 Jones, respectively. This strategy was also applied to a ZnO film UV photodetector that was tuned by a P(VDF-TrFE) ferroelectric gate. Lower power consumption and higher performance can be enabled by ferroelectric tuning of ZnO ultraviolet photodetectors, providing new inspiration for the fabrication of high-performance photodetectors.

| S-EPMC9565710 | biostudies-literature

Band-like transport in small-molecule thin films toward high mobility and ultrahigh detectivity phototransistor arrays.

Project description:With the fast development of organic electronics, organic semiconductors have been extensively studied for various optoelectronic applications, among which organic phototransistors recently emerged as one of the most promising light signal detectors. However, it is still a big challenge to endow organic phototransistors with both high mobility and high light-sensitivity because the low mobility of most organic photoresponsive materials limits the efficiency of transporting and collecting charge carriers. We herein report band-like charge transport in vacuum-deposited small-molecule thin films for organic phototransistor arrays which can be operated at very low dark currents (~10-12?A). Both high mobility and excellent optical figures of merit including photosensitivity, photoresponsivity and detectivity are achieved, wherein, unprecedentedly, a detectivity greater than 1017?cm?Hz1/2?W-1 is obtained. All these key parameters are superior to state-of-the-art organic phototransistors, implying a great potential in optoelectronic applications.

| S-EPMC6315033 | biostudies-literature

Ultra-fast photodetectors based on high-mobility indium gallium antimonide nanowires.

Project description:Because of tunable bandgap and high carrier mobility, ternary III-V nanowires (NWs) have demonstrated enormous potential for advanced applications. However, the synthesis of large-scale and highly-crystalline InxGa1-xSb NWs is still a challenge. Here, we achieve high-density and crystalline stoichiometric InxGa1-xSb (0.09 < x < 0.28) NWs on amorphous substrates with the uniform phase-purity and <110 >-orientation via chemical vapor deposition. The as-prepared NWs show excellent electrical and optoelectronic characteristics, including the high hole mobility (i.e. 463 cm2 V-1 s-1 for In0.09Ga0.91Sb NWs) as well as broadband and ultrafast photoresponse over the visible and infrared optical communication region (1550 nm). Specifically, the In0.28Ga0.72Sb NW device yields efficient rise and decay times down to 38 and 53 μs, respectively, along with the responsivity of 6000 A W-1 and external quantum efficiency of 4.8 × 106 % towards 1550 nm regime. High-performance NW parallel-arrayed devices can also be fabricated to illustrate their large-scale device integrability for next-generation, ultrafast, high-responsivity and broadband photodetectors.

| S-EPMC6458123 | biostudies-literature

Effect of N2 and H2 plasma treatments on band edge emission of ZnO microrods.

Project description:ZnO microrods were grown by laser assisted flow deposition technique in order to study their luminescence behaviour in the near band edge spectral region. Transmission electron microscopy analysis put in evidence the high crystallinity degree and microrod's compositional homogeneity. Photoluminescence revealed a dominant 3.31 eV emission. The correlation between this emission and the presence of surface states was investigated by performing plasma treatments with hydrogen and nitrogen. The significant modifications in photoluminescence spectra after the plasma treatments suggest a connexion between the 3.31 eV luminescence and the surface related electronic levels.

| S-EPMC4450596 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data